How to see 5Ghz band using WRT610N and WUSB600N

I've installed the WRT610N router, and am connecting via WUSB600N adapter. I have only installed the driver for the adapter (not Linksys's LELA), and am using WinXP's "Wireless Network Connection" to connect. I've run into problems in the past with LELA causing errors, and I'd rather avoid using it.
The problem is that I cannot see the 5Ghz band. I can only see the 2.4Ghz band. What do I need to do in order to see (and hopefully connect to) the 5Ghz band? (I would hope that my not using LELA would be a non-factor. Theoretically, I should be able to use any brand of "N" adapter to connect with the larger band... Right?)

I have noticed that 5GHz channels on routers are sometimes set automatically far out at channel number 149 and thereabouts. I had a similar problem in that I knew I had a 5GHz band, but I couldn't even see it to try to connect. It appears that the Linksys utility which came with the WUSB600N cannot 'see' past about channel 50.
You may want to try setting the channel manually in the router to something like channel 38. The Linksys utility will definitely be able to 'see' it then, and should offer the ability to connect.

Similar Messages

How to connect one page using button and by link in BSP

how to connect one page using button and by link in BSP

hi,
use on 'onclick' functionality.
1. In layout, onclick = 'NEXT_PAGE' of the button
2. Capture the event in onInputprocessing,
DATA: event_id TYPE REF TO cl_htmlb_event.
case event_id.
when 'NEXT_PAGE'.
navigation->goto_page( 'URPAGE URL' ).

Explain How delivery date is calculated using backward and forward schedul

How can anyone please explain how delivery date is calculated using forward and backward scheduling
I want to have it broken down into the following steps
for eg for delivery date calculation following dates are used
Material Availabilty Date
Material Staging Date
Pick/pack time
Transportation PLanning date
Loading date
Goods issue date
Transit Date
Delivery Date
Can some one please give me an example and explain wht these dates are
for eg customer needs delivery date on 11/20/2008
how would the system cacluate whether it can meet the delivery date using backward scheduling
and if it doesnt meet how does the system do the forward scheduling
also i am not clear with the following dates
material avaialibilty date
material staging date
transportation date
can some one please explain me all this in detail
Thanks

Hi,
Basically this is the CRSD(Customer requested ship date logic)logic in which system calculates the ship date depends upon the material availability. If material is available system calculates ship date on the basis of master data maintained in customisation.Master data is maintained in the following link.
If material is not available then system takes into consideration vendor delivery date & then calculate customer ship date.
Please go through the link in SPRO
LE-Shipping -Basic shipping functions-Scheduling -Delivery scheduling & Transportation scheduling-Maintain duration.
In customisation following data is maintained
Material Availabilty Date
Material Staging Date
Pick/pack time
Transportation PLanning date
Loading date
Goods issue date
Transit Date
Delivery Date
Hope you got the idea of CRSD calculation
Regards,
Prashant.

How to refresh table display using slis and 'reuse_alv_grid_display method.

hello,
how to refresh table display using slis and 'reuse_alv_grid_display method'.
when i'm refreshing table display it performs once again reuse_alv_grid_display.and when i back the previous value appear.how to solve it?
neon

are you chaning any value in the gird if so use this..
Pass the user_command form name to the Import parameter
I_CALL_BACK_USERCOMMAND .
and have the Dynamic form implementation..
FORM user_command USING ucomm TYPE sy-ucomm
            selfield TYPE slis_selfield.
"The below is important for Editable Grid.
DATA: gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
    CALL METHOD ref_grid->check_changed_data .
ENDIF.
CASE ucomm.
    WHEN 'REFRSH'.
ENDCASE.
       selfield-refresh = 'X'.
ENDFORM.                    "user_command

WRT610N and WUSB600N, "freezes" when playing online

Hi!
I have a WRT610N and WUSB600N. They work good for downloading/uploading files and surfing the web but when I play online poker the connection freezes(the connection doesn't drop) a couple of seconds a couple of times each minute. I'm using the 2.4GHz and the N mode, everything else is set to auto. I changed the encryption to AES but that didn't fix it. I've tried playing using a cable instead and that works perfectly.
Any ideas on what might help?

You need to adjust the Wireless Settings on your router :
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuratioon...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select either TKIP or AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 6 characters...Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
See if this helps you...

How to Split the string using Substr and instr using loop condition

Hi every body,
I have below requirement.
I need to split the string and append with single quotes('') followed by , (comma) and reassign entire values into another variable. so that i can use it where clause of update statement
for example I am reciveing value as follows
ALN varchar2(2000):=(12ERE-3MT-4Y,4IT-5O-SD,OP-K5-456,P04-SFS9-098,90P-SSF-334,3434-KJ4-O28,AS3-SFS0-J33,989-3KL-3434);
Note: In the above variable i see 8 transactions, where as in real scenario i donot how many transaction i may recive.
after modification i need above transactions should in below format
ALTR Varchar2(2000):=('12ERE-3MT-4Y','4IT-5O-SD','OP-K5-456','P04-SFS9-098','90P-SSF-334','3434-KJ4-O28','AS3-SFS0-J33','989-3KL-3434');
kindly help how to use substr and instr in normal loop or for loop or while loop while modifying the above transactions.
Please help me to sort out this issue.
Many Thanks.
Edited by: user627525 on Dec 15, 2011 11:49 AM

Try this - may not be the best way but...:
create or replace type myTableType as table of varchar2(255)
declare
v_array mytabletype;
v_new_str varchar2(4000);
function str2tbl
         (p_str   in varchar2,
          p_delim in varchar2 default '.')
         return      myTableType
    as
        l_str        long default p_str || p_delim;
         l_n        number;
         l_data     myTableType := myTabletype();
    begin
        loop
            l_n := instr( l_str, p_delim );
            exit when (nvl(l_n,0) = 0);
            l_data.extend;
            l_data( l_data.count ) := ltrim(rtrim(substr(l_str,1,l_n-1)));
            l_str := substr( l_str, l_n+length(p_delim) );
        end loop;
        return l_data;
   end;
begin
v_array := str2tbl ('12ERE-3MT-4Y,4IT-5O-SD,OP-K5-456,P04-SFS9-098,90P-SSF-334,3434-KJ4-O28,AS3-SFS0-J33,989-3KL-3434', ',');
      FOR i IN 1 .. v_array.COUNT LOOP
         v_new_str := v_new_str || ''''||v_array(i)||'''' || ',';
      END LOOP;
   dbms_output.put_line(RTRIM(v_new_str, ','));
end;
OUTPUT:
=======
'12ERE-3MT-4Y','4IT-5O-SD','OP-K5-456','P04-SFS9-098','90P-SSF-334','3434-KJ4-O28','AS3-SFS0-J33','989-3KL-3434'HTH
Edited by: user130038 on Dec 15, 2011 12:11 PM

How to automlog into webside using username and password using java program

I am trying to log in to a website using password and username. What libraries i can use. I searched online and came to know that i can use Apache's commons HttpClient library to do that. I am new to this please let me know what can i use.
For starting purpose i wrote this code:
public static void main(String[] args) throws URIException {
     try {
          HttpClient client = new HttpClient();
          GetMethod method = new GetMethod("http://www.google.com");
               int returnCode = client.executeMethod(method);
               System.err.println(method.getResponseBodyAsString());
          method.releaseConnection();
          } catch (HttpException e) {
               e.printStackTrace();
          } catch (IOException e) {
               e.printStackTrace();
but this is giving me an error. please see below,
java.net.UnknownHostException: www.google.com
     at java.net.AbstractPlainSocketImpl.connect(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:80)
     at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:122)
     at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
     at com.verizon.zoeott.ingest.PropertyFileReader.main(PropertyFileReader.java:48)
Another thing is that we use proxy to get internet connection. In internet explorer-->internet options-->LAN Settings-->using automatic configuration script to connect to the internet.
I don't know how to configure this into java program. please help.
Thanks,
amol
Edited by: 877846 on Jan 20, 2012 9:16 AM
Edited by: 877846 on Jan 20, 2012 9:21 AM

Also please let me know about how to connect internet through proxy server.As I said above, if you are using the Apache HTTP client, no we can't, as this is not an Apache forum. I also told you where to find that answer.
If on the other hand you don't want to use that client any more, setting the system properties http.proxyHost and http.proxyPort will do it for java.net.HttpURLConnection. See the Java Custom Networking tutorial for examples.

Slight bands using Aperture and Canon 30D

Hi guys,
I have some problems using Aperture, developing/converting RAW files from my Canon 30D.
Unfortunatly I have bands in my pictures. Means that there are slight differences in the brightness of the files, which will give horizontal bands.
We already tested these files in other RAW converters like Capture One, RAW developer and Adobe RAW Converter.
Only the Adobe RAW Converter doen't show these bands in the RAW file, so we think that these are probably are errors coming from the camera chip, which Adobe already knows and fixed by their converter files.
I only see these bands on my concert pictures using ISO400 to 800. This will probably explain the errors coming from the chip.
So my question is, does anyone of you saw the same things in your pictures?
I have and developed image where you can see the problem. I also can send you the original RAW file to check for the problem.
http://www.mactechnews.de/index.php?function=24&cat=54&thread=68973
Wishes,
Cornelius

A guy from www.macuser.de found this interesting link
http://forums.dpreview.com/forums/readflat.asp?forum=1019&message=13414851&chang emode=1
I guess this describes the problem quit good!
Hope we can find a solution!

Ipad - how to see what is using the storage?

my ipad has 13.6GB capacity but only 1.0 GB available.
Is there a way to see what is using the capacity?

Connect to your computer.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Can not see 5GHz band on my network

My HP 200 Quad all in one PC can not see the 5GHz band on my network. It works fine on the 2.4GHz band and I have another PC on the network that is able to see the 5GHz band. My wireless card is a Ralink and according to its properties it should operate on the 5GHz band on channels36-161. HP Tech support wants to charge me to fix this and the unit is 3 weeks old and was like this right out of the box, not to mention my 2 year warrnty. Can anyone help?
Freddy

FWV wrote: hanspuppa, My wireless card is a Ralink Technology device and it does have blue tooth. To the best of my knowledge this card is capable of receiving the 5 GHz signal but it does not. When I check the wireless device properties it list the 5 GHz band to operate through channels 36-161 and also states the device is working
properly. The last I checked my router it was broadcasting on channel 36, so everything seems to be fine but I can not receive the signal.
Hello FWV, Sorry for the confusion. I was under the impression that you could not connect at 5 ghz. Now you suggest you cannot connect at all.
Can you advise if the Ralink can connect to the wireless router at the 2.4 ghz frequency, or not connect at all?
Can you advise if you can see the router on the network at the 2.4 ghz.?
Many times, you may need to reboot the router to allow it to recognize new connections.
Just not sure of what is going on. Maybe some other Member can be of more help.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

How to see who's using my account on iMessage

today i was talking to my friend with i meassage and then someone started typing as me please tell me how to see whos using it, and i changed my password but that didnt work.

It is VERY possible!
Is this a new cell phone number?
If someone had it before, they might still have it active in WIFI, even if it's disconnected at the carrier. This has been happening to me, for a while. Ever since my girlfriend got a new number on her LG, the previous owner has been getting messages I am sending. Unless I turn off iMessage, which then forces them to the cell as text (SMS)
There is NO PROCESS TO FORCE SOMEONE TO STOP USING THEIR OLD NUMBER ON WIFI IMESSAGE
ON A DISCONNECTED IPHONE!!!!!
VERY SERIOUS ISSUE!!
Jobs would be rolling over in his grave if heard this!!

How to search for files using wildcards * and ?.

Hi All,
I've been searching the forum for a couple of hours now and have been unable to find a good example of how to search a directory (Windows OS) for a file using wildcards * and/or ?. Does anyone out there have a good example that they can share with me?
Thanks

Hi All,
First of all I want to thank everyone for taking the time to respond to my question. All of your responses where greatly appreciated.
I took the example code that was posted by rkconner, thanks rkconner, and modified it to allow me to search for files in a directory that contain * and/or ?. Yes, I said and/or! Meaning that you can use them both in the same file name, example: r??d*.t* would find readme.txt.
I've posed my complete and thoroughly document code below. I hope it is very helpful to other as I have searched many forums and spent many hours today trying to resolve this problem.
Enjoy
* File Name: WildcardSearch.java
* Date: Jan 9, 2004
* This class will search all files in a directory using the
* asterisk (*) and/or question mark (?) as wildcards which may be
* used together in the same file name. A File [] is returned containing
* an array of all files found that match the wildcard specifications.
* Command line example:
* c:\>java WildcardSearch c:\windows s??t*.ini
* New sWild: s.{1}.{1}t.*.ini
* system.ini
* Command line break down: Java Program = java WildcardSearch
*                          Search Directory (arg[0]) = C:\Windows
*                          Files To Search (arg[1]) = s??t*.ini
* Note: Some commands will not work from the command line for arg[1]
*        such as *.*, however, this will work if you if it is passed
*        within Java (hard coded)
* @author kmportner
import java.io.File;
import java.io.FilenameFilter;
public class WildcardSearch
     private static String sWild = "";
      * @param args - arg[0] = directory to search, arg[1] = wildcard name
     public static void main(String[] args)
          String sExtDir = args[0]; // directory to search
          sWild = args[1];   // wild card to use - example: s??t*.ini
          sWild = replaceWildcards(sWild);
          System.out.println("New sWild: " + sWild);
          File fileDir = new File(sExtDir);
          File[] arrFile = fileDir.listFiles(new FilenameFilter()
               public boolean accept(File dir, String name)
                    return (name.toLowerCase().matches(sWild));
          for (int i = 0; i < arrFile.length; ++i)
               System.out.println(arrFile.getName());
     }     // end main
     * Checks for * and ? in the wildcard variable and replaces them correct
     * pattern characters.
     * @param wild - Wildcard name containing * and ?
     * @return - String containing modified wildcard name
     private static String replaceWildcards(String wild)
          StringBuffer buffer = new StringBuffer();
          char [] chars = wild.toCharArray();
          for (int i = 0; i < chars.length; ++i)
               if (chars[i] == '*')
                    buffer.append(".*");
               else if (chars[i] == '?')
                    buffer.append(".{1}");
               else
                    buffer.append(chars[i]);
          return buffer.toString();
     }     // end replaceWildcards method
}     // end class

How to see the portal runtime errors and exception

Hi friends,
I am new to the EP. Can you plz let me know how to see the logs of the error occurs during the runtime.
I have got the following error "Error occurs during the rendering of jsp component"
But I am not able to see the logs.
can you plz tell me the exact path to see the error logs
Thanks and regards,
Kuldeep Verma

HI Kuldeep
Yoiu can check the portal Logs and traces in link as the bellow.
http://your_url:portno/nwa
The JSP logs you can trace there.
Just follow the following path after loged in to NWA.
Monitoring -> Logs and Traces ->
Then in the dropdown menu select the Default Trace
Cheers
Chinmaya
Reward for helpful answers

How to create a user using XML and specifying addional attributes that are objects

I'm trying to create a user using XML and specifying some attributes that are objects and not sure how to do it. How would I set the DirectoryUserAcl to Public?
Here's the xml file:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl> ??? </DirectoryUserAcl>
<DefaultAclBundleAcl> ??? </DefaultAclBundleAcl>
<HomeFolderPolicyBundleAcl> ??? </HomeFolderPolicyBundleAcl>
</SimpleUser>

I figured out the answer:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl classname="SystemAccessControlList" refType="name">Public</DirectoryUserAcl>
</SimpleUser>
null

How to creating pdf documents using c# and Adobe SDK

I downloaded Adobe SDK and go through the samples given in sdk. But i couldn't find any sample code how to create PDF file using C# code.
Please, help me with this.
Thanks.

For desktop-based solutions, look at the Adobe Acrobat SDK which enables development around Acrobat itself. Or if you wish a stand-alone solution (for either desktop or server), we offer the Adobe PDFLibrary, which is the same technology used by all of Adobe's applications.
For the server, we have our LiveCycle products including LC Generator.
Leonard

How to see 5Ghz band using WRT610N and WUSB600N

Similar Messages

Maybe you are looking for