How to see a stream of a signal in the Data View while monitoring a signal.

Hi!
I'm migrating from an older data acquisition software for SignalExpress. With the DAQ old had a way to monitor the signal so that the software screen I saw on the timeline and as I increased or diminished the scale of the X axis (time), I saw more or less signal transitions in screen, respectively. For example, if the time scale (x axis) was set to 5 seconds and the signal that I was monitoring commute every 1 second, I would see on the screen of the software 5 sequential pulses.
I am not able to configure my data acquisition that way. What I have noticed is that the scale of the X axis is limited to the value of the "Samples to read." With that, I see the sign on the software screen is instantaneous and not a sequence of pulses.
I intend to monitor the signals are random signals originating from idependentes and switching relays.
In summary, I believe that the solution to what I want to do is increase the scale of the axis X. How to do this?
I use SignalExpress 2011, USB-6363 DAQ step and Digital Line Input.
Thank you.

OKors,
First, sorry for the delay in responding to you. And second, thanks for your reply.
I will try your suggestion: continuously scrolling "strip chart".
To try to clarify, what I want is to merge than I can with Digital Graph - signs lined up vertically with the display type Chart, where it can act on the parameters of History Lengh, as you suggested, to achieve "curb" the transition graph .
If using the first solution, Digital Graph, the screen transitions are very fast. On the other hand, if using the graph chart type for digital signals, they overlaps, since all have the same value - 0 or 1.
The idea is that these two characteristics in a single graph (Data View). I believe something to be simple, but I'm having trouble mounting this setting.
That's it. Any news ... I'll post here.

Similar Messages

My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

How do i set up and automatic out of the office message while I am away on vacation?

How do I set up an automatic out of the office reply while I'm on vacation?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
If your problem is with Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is trying to backup data from the iPhone. I have done everything suggested in Apple support. How can I upgrade to iOS5 without losing all the data on my phone?

Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is backing up data from the iPhone before installing the new operating system. I have done everything suggested in Apple support with no success. I still get the error everytime (about 5 minutes into backing up iPhone data). How can I upgrade to iOS5 without losing all the data on my iPhone (the error message says that if I continue I will lose all data on the phone)? If I have already synced the phone before upgrading the OS, would I be able to restore my data after installing the new OS by syncing after the OS upgrade is complete? Any help would be greatly appreciated.

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

How do I set the scope to recursive in the Data View Web Part in SP 2013?

How do I set the scope to recursive in the Data View Web Part in SP 2013?
I have items in folders that I would like to display in the data view web part out of their folders. I know that I need to set the scope to recursive. I found documentation on how to do it in 2010, but since they removed all views other than
the code view, I am unsure about how to do so.
Link to article describing how to do what I am trying to do in 2010:
https://www.nothingbutsharepoint.com/2009/05/13/data-view-web-part-folders-part-2-aspx/

Hi,
In SharePoint Designer 2013, we can click the code of the Data view web part. Then switch the tab to "OPTIONS". And then we can find the Folder Scope option, you can select "Show All Files of All Folders"
to achieve your requirement.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

How do you put a 5 nav links in the tablet view in DW CC fluid layout?

Hola
How can I put a 5 links nav in the tablet view in DW CC 2014?
There is only 8 columns so 5 links won't fit
so, what is the best way to accommodate the fifth link?
Thanks

You need a responsive menu system (mobile and touch screen friendly).
PVII's Pop-Menu Magic3 (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
Responsive Iconic
Dynamic Drive CSS Library- Responsive Iconic Menu
Responsive Hybrid
Dynamic Drive DHTML Scripts- Page Sideview Menu
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MeanMenu (responsive on mobile)
http://www.meanthemes.com/plugins/meanmenu/
Nancy O.

How can I get my document to save with the rotated view last used?

How can I get my document to save with the rotated view last used?

Possible with Adobe Acrobat, not Adobe Reader.

How do I organize my songs in itunes by the date they were added?

how do I organize my songs in itunes by the date they were added?

Right click the header bar. Select "Date Added" to add it if it isn't already a sort category. Then click the heading to sort either in ascending or descending order.

How to assign a button for attachment and send the data through browser ?

Hi friends,
How to convert to browser ?
how to assign a button for attachment and send the data through browser ?
Thanking you.
Regards
Subash.

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question...
Jonathan

How i enter the ECG signal to the lab view through the sound card

first i open the help and find example the display the signal of the mic
and i enter the ECG signal through the mic and displaied
but when displaied the ECG appearied only one period on the chart so on if the chart with full screen you can see only one period
and when i change the x scale the signal compressed in a part of chart and the remain part of the chart empity
so how i display at least three periods of ECG
Attachments:
ECG with sound card.vi ‏20 KB
Untitled.jpg ‏37 KB

I do not have LabVIEW version 9, only 8.6
Without looking at your program can take a guess. Have you set the property "chart history length" of the graph? If you consider that an individual has a heart rate of up to 50Hz, or period of 20ms. Soon the number of points required is (3 * 20ms) / (sample time).
If this is not the problem, you could send the converted code to version 8.6 of LabVIEW?

How do I measure the period of one TTL signal and the delay until a second TTL signal?

Hi,
I have a PCI 6024E board, the SCB-68 terminal box and am running LabView 6.1. If needed I could install 7.1.
I have two Honeywell sensors (HOA7720) which each consist of an infrared transmitter and a infrared reciever. When the beam is broken they output 5V, when the beam is open it outputs 0V. These are sensing the presence of a hole in two discs passing thru the sensors.
So as disc 1 rotates the signal is 5V until the hole passes thru sensor 1, then it drops to 0V until the hole passes. Then it jumps back to 5 V.
Disc 2 is rotating at exactly the same RPM as disc 1 because they are coupled with a spring loaded coupling. There is a delay between the first hole passing thru sensor 1 and the second hole passing thru sensor 2. The delay increases with torque.
Using the oscilliscope function and connecting Signal1 and Signal2 to AIn0 and AIn1, I have verified that the TTL signals are there. So electrically everything is working. I just need to know how to measure the period and delay. I'm familiar with A/D, but not with counters/gates etc and I think that's what is required here.
The first measurement needed is RPM.   Somehow I need to measure the period of the TTL signal.
The second measurement needed is the delay between the 1st falling edge and the 2nd falling edge.
I don't think it's possible to use the millisecond timer for anything, because the accuracy wouldn't be good enough. At 3600RPM the disc will spin 60 revs per second, or one every 17ms.  A resolution of 17 samples per revolution is not good enough.
Help please!

It worked!
I ended up figuring it out today. It's really simple. I went analog in to AIn14 and AIn15 which were free. Then the program does a multichannel scan of the signals (collects array of 2 waveforms), Signal 1 and Signal 2 at some scan rate. I used 100,000 S/s for 10,000 samples. Then I split the array into two separate waveforms. Then I did an edge detect on each one and it returns the position in the array where the falling edge occurs. The difference is the delay (after correcting for the scan rate), unless Sig2 comes first in which case the delay is the period - (or +) the difference
To find the period I used a subset of the Signal 1 waveform from the first falling edge on to the end of the waveform, then did the same edge detect except set the reset setting to true instead of false so it wouldn't detect the low signal which was now at the position 0 in the waveform. So it would ignore the initial low value, wait for it to go high, then detect the falling edge position.
Anyway, it works awesome, seems very accurate and gives very stable readings. 3600rpm no problem. It detects changes of one or two degrees in angular position, with a range from ~145 degrees to ~280 degrees

How to see when ipod was last synced from the pc

I think my iPod is either lost/stolen and the only way to find out for sure is to see when my iPod was last synced on my computer. how do you find out the time that this happened?

Welcome to the discussions,
every time you sync a backup is created. You can find the list of stored backups in iTunes/Settings/Devices. Hover over the name of the device and you'll see the serial number of the device and right next to the backup the date it took place.
But you can't find out if your ipod has been synced on another computer using your PC.
Message was edited by: Ingo2711

How do I check to see if a channel group exists in the data portal?

I have a list of channel groups in the data portal but sometimes some channel groups are not created all the time. How do I check using a script if a channel group exists or was created.

Hello jreynolds!
With the command 'GroupIndexGet'. It returns 0 if the group does not exist.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

How can i access a mysql table without putting the data in a datagrid

I developed my air app with a datagrid which uses a php service to display all data from a table of strings in MySql.
I now do not need the datagrid, how can i get the data from my database without putting it into a dataGrid? Do i need an array? how do i do this? anyone got any example code?

Balakrishnan V wrote:
var resultArrayCollection:ArrayCollection=new ArrayCollection()
protected function resultHandler(event:ResultEvent)
result=event.result as ArrayCollection
You can use the result array collection now inside your program for any further changes / manipulations.
Hope this helps; If you have further doubts, do ask...
Balakrishnan V
Hi, yeah this helps,
however, how would i generate a result handler for a service that has not been called yet? Sorry my knowledge of services is very limited.
This is a php service, get_all service that returns all the rows from a mysql table.
I can see the service box with the service i want to use:
but how do i pass that to a result handler?

How to see a stream of a signal in the Data View while monitoring a signal.

Similar Messages

Maybe you are looking for