How to see Accounting

Hi
I have installed ACS appliance version 5.1.0.44 in my office.I tried to check TACACS accounting for what command the engineers used but I couldnt find the outputs.Please advse how to get it.
This is my configurtion.
aaa new-model
aaa authentication password-prompt xxxxx
aaa authentication username-prompt yyyyy
aaa authentication login telnet group tacacs+ local
aaa authentication login console group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa session-id common
Thanks and Regards,
Shahul Hameed

Hi Neno
I have added the switch as client in AAA server.
Please check all my AAA config in Switch.
aaa new-model
aaa authentication password-prompt xxxxx:
aaa authentication username-prompt yyyyy:
aaa authentication login telnet group tacacs+ local
aaa authentication login console group tacacs+ local
aaa authentication login ssh group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa session-id common
ip tacacs source-interface Loopback0
tacacs-server host x.x.x.x key sdsdsdsd
tacacs-server host x.x.x.x key dsdsdsds
tacacs-server directed-request
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting exec default start-stop group radius
aaa accounting dot1x default start-stop group radius
dot1x system-auth-control
dot1x critical recovery delay 2000
dot1x critical eapol
ip radius source-interface Loopback0
radius-server dead-criteria time 15 tries 15
radius-server host x.x.x.x auth-port 1645 acct-port 1646
radius-server host x.x.x.x auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server deadtime 1
radius-server directed-request
radius-server key dddsdsdds

Similar Messages

How to see all GL A/c List & Chart of Accounts list

Pls tell me, How to see all created GL A/c List & Chart of Accounts list

Dear Jaheer,
For all Gl account please use T code-S_ALR_87012333,Just give company code and execute.
For All COA list Please use T code-S_ALR_87012326,just execute after entering the T code.
Hope this will solve your requirement.
Regards
Eugene

HT1918 How can I see account CREDITS on my itunes account? I want to confirm that a gift card went through a month ago.

How can I see account CREDITS on my itunes account? I want to confirm that a gift card went through a month ago.

It's not currently possible to see a list of cards that you've redeemed onto your account - you can try contacting iTunes Support but I'm not sure that they'll be able to tell you either : http://www.apple.com/support/itunes/contact/ , then click on Contact iTunes Store Support on the right-hand side of the page

How to see the GL Accounts balance carry forwarded date

hi gurus
can you help me, how to see the date of last GL accounts Carry forwarded?
thanks in advance
amk

That information will not be any use.
You can carry forward any number of times - the last should be after closing of previous years accounts.
Hope it is clear.

How to see the details of archived vendor account?

Hi,
User want to see the detail line items of a vendor account for year 2002. As it has been archived, we are able to see the balances only but not the details. Can anyone please let me know, how to see the details for an archived data.
Quick response will be appreciated.
Thanks & Regards

Hello,
Use t.code SARI for archived line items
give archiving object MM_EKKO and archiving infrostructure SAP_DRB_MM_EKKO and execute
you will get other screen and fill the necessary fileds and execute.
regards
kumar.

How to see who's using my account on iMessage

today i was talking to my friend with i meassage and then someone started typing as me please tell me how to see whos using it, and i changed my password but that didnt work.

It is VERY possible!
Is this a new cell phone number?
If someone had it before, they might still have it active in WIFI, even if it's disconnected at the carrier. This has been happening to me, for a while. Ever since my girlfriend got a new number on her LG, the previous owner has been getting messages I am sending. Unless I turn off iMessage, which then forces them to the cell as text (SMS)
There is NO PROCESS TO FORCE SOMEONE TO STOP USING THEIR OLD NUMBER ON WIFI IMESSAGE
ON A DISCONNECTED IPHONE!!!!!
VERY SERIOUS ISSUE!!
Jobs would be rolling over in his grave if heard this!!

How to see the balance under different balance if special ledgers exist???

Some of the company using special ledgers. I need to teach user how to see the balance under different balance.
I will focus on
1. display voucher
2. check GL balance
Anyone have idea (detailed flow)/template (preferred) on these issues?
Thanks a lot for your help in advance

hi,
/n----
> acccounting -
>financial accounting -
>GL acccounts -
> information system -
> gl reports
here in this path u can get all the gl list and gl balances list ....
u can check what ever reports u want.....
if useful assign points...
regards,
santosh kumar

How to see Trial Balance for a Segment

Hi Experts,
Does anybody has idea on how to see Triala Balance for a Segment ?
In Standard Reports for Balance Sheet and Profit & Loss, SAP B1 has provided option for filtering on Segment, but the same is not true for Trial Balance.
BR
Samir Gandhi

Hi Samir,
yes it is possible to display Trial Balance in Segment format.
open Trial Balance Report, in the Upper right hand of the of the window next to G/L Accounts you can find the "FIND" button, click that one then the Find G/L Account window opens. from this window you cans Select Segmentation accounts.
regards,
Fidel

How to see photos on icloud drive with iphone 5c ios 8.1

how to see photos loaded onto icloud drive with iphone 5c ios 8.1?? carnt see them in the new photos app everythings up to date and icloud enabled on phone??
many thanks

Go to iCloud.com on a computer. To see them on your iPhone go to iCloud.com in Safari. Tap the URL field. Pull favorites down and tap request desktop site. Sign into your iCloud account. Now you can view iCloud Drive or Photos if you turned on iCloud Photo library.

HOw to see currency pairs in Exchange rate type

Hi,
Can anyone tell me how to see currency pairs in an exchange rate type?
Thanks

Hi,
I am not sure this is a right solution. But I have some inputs on your requirements:
1. For traveller cheques you may create a new payment method and do the required configuration for automatic payment program. Don't generate any payment medium while running APP.
2. For currency notes (cash payment) I am not sure how it works. But probably it is possible by creating an account (account ID) for a particular house bank and use that (house bank & account id) for making payment.
Per my knowledge we have never used payment method cash (currency notes) in APP. But logically it would work by create a new payment method and doing the required config for APP.
Please update if you found a better way to do this.
thanks & regards,
Kumar

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

How to see the result

hi every body...
i want to get the result of any table..
for ex: select * from dept;
the o/p should be like(10~Accounts~new york)
for this i wrote this code.... it run sucessfully;
my prob is how to see the Result..
declare
tn varchar2(35);
sqlstmt varchar2(2000);
rc sys_refcursor;
begin
tn := '&tn';
sqlstmt := 'select * from '||tn;
open rc for sqlstmt;
end;
post u r comments,Hints and suggestion...

post u r comments,Hints and suggestion...
SQL> var rc refcursor
SQL> begin
2     open :rc for 'select * from &tn';
3 end;
4 /
Enter value for tn: emp
old   2:    open :rc for 'select * from &tn';
new   2:    open :rc for 'select * from emp';
PL/SQL procedure successfully completed.
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SPENCER    CLERK           7902 17-DEC-80        800                    20
      7499 VERREYNNE SALESMAN        7698 20-FEB-81       1600        300         30
      7521 VAN WIJK   SALESMAN        7698 22-FEB-81       1250        500         30
      7566 MAINGUY    MANAGER         7839 02-APR-81       2975                    20
      7654 KISHORE    SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BARRY      MANAGER         7839 01-MAY-81       2850                    30
      7782 BOEHMER    MANAGER         7839 09-JUN-81       2695                    10
      7788 PADFIELD   ANALYST         7566 09-DEC-82       3000                    20
      7839 SCHNEIDER PRESIDENT            17-NOV-81       5500                    10
      7844 GASPAROTTO SALESMAN        7698 08-SEP-81       1500          0         30
      7876 CAVE       CLERK           7788 12-JAN-83       1100                    20
      7900 CLARKE     CLERK           7698 03-DEC-81        950                    30
      7902 JAFFAR     ANALYST         7566 03-DEC-81       3000                    20
      7934 ROBERTSON CLERK           7782 23-JAN-82       1430                    10
       109 JOMAR                                                                   30
      8800 VISWARAYAR INTERN          7934 03-OCT-82          0                    10
16 rows selected.
SQL> Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

How to see report of open po

Dear All,
how to see report of open po
Rgds,
Vikas

Dear Vikas,
ME2B                 POs by Requirement Tracking Number
ME2C                 Purchase Orders by Material Group
ME2J                 Purchase Orders for Project
ME2K                 Purch. Orders by Account Assignment
ME2L                 Purchase Orders by Vendor
ME2M                 Purchase Orders by Material
ME2N                 Purchase Orders by PO Number
ME2O                 SC Stock Monitoring (Vendor)
ME2S                 Services per Purchase Order
ME2V                 Goods Receipt Forecast
ME2W                 Purchase Orders for Supplying Plant
Regards,
Naveen.

How to See FM (RFFMS007)? What exactly is it?

How to see FM (RFFMS007) in the system?
What exactly is it?
How do we use the tables in SAP?
How to look for tables in FI and FM? What are the uses? How do we see the contents of the tables?

Hello,
Please check all Utility programs in Public Sector Management (PSM-FM)
1. General utility programs
     RFFMMONI (Monitor using PSM settings). This report displays the most important Customizing settings for the update of Funds Management (FM area, OFUP, settings for the update profile). The report also displays customer-specific update profiles that differ from the standard profile that is delivered by SAP.
     RFFMS007 (Activate/Deactivate Document Analysis in Funds Management).
     RFFMS008 (document analysis).
     RFFMS009 (analysis of FM account assignments in posted documents)
2. Special utility programs
     a) Former budgeting
        BPINDAN2_NEW (AVC: Determining the Index for Assignable Element)
        RFFMBUM1 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the overall values and the annual values correspond with the total of the relevant
        documents.
        RFFMBUM2 (Sum of Period Values <> Annual Values). This program determines inconsistencies between annual values and period values.
        RFFMBUM3 (Budgeting Data without Corresponding Master Data). This program determines inconsistencies on the database.
        RFFMBUM5 (Budget/Release Consistency Check). This program checks in the database whether the release amount exceeds the budget amount.
        RFFMBUM6 (Inconsistencies between Budget Structure and Master Data). You can use this program to determine inconsistencies between the budget structure tables and the master data tables.
        RFFMBUM7 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the total of the line items corresponds with the overall budget of the relevant record       for the overall values or the annual values of a specific budget type or budget subtype.
        RFFMBUM8 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the overall budget record for overall values or annual values corresponds with the
        total of the relevant line items of a specific budget type or budget subtype.
        b) Fiscal year change
           RFFMCFM1 (Closing operations monitor). You can use this report to display an overview of the settings that are relevant for the closing operations.
           RFFMCCF_DISPLAY You can use this report to display documents concerning the fiscal year change.
        c) Account derivation
           You can use transaction FMDERIVE to activate the trace. You can reproduce the account derivation during posting as a result.
        d) Payment selection (RFFMS200)
           RFFMS200_TRACE (Trace for Payment Selection Analysis). You can use this check program to analyze a complete clearing lot without debugging the payment selection program or without having to    search for the relevant information in the system.
           FAGL_SHOW_SPLIT Simulation of the document splitting using expert mode -> this is relevant for online payment update.
        e) Federal Government
           RFMFGRCN_RP1 Reconciliation Analysis Report
    3. Matching programs
        RFFMRC04 (for matching line items and the totals record). This report analyzes differences between line items and totals records in Funds Management. If derivations were corrected in the update run, you must set up the availability control (transaction FMBV) again because this control is based on the totals records.
        RFFMRC01 (for matching actual data). This report checks at line item level whether the selected FI documents are updated in Funds Management.
        RFFMRC07 (for payment matching). You can use this report to match the account movements on the bank accounts and the bank clearing accounts of financial accounting with the data in Funds Management and vice versa.
        RFFMRC21 (for the reconciliation of earmarked funds). You can use this report to reconcile documents such as funds reservations, funds precommitments, funds commitments, funds blocking and forecasts of revenue. If the program determines inconsistencies, you can use transaction FMN5N (program RFFMRP03N) to correct the relevant FM commitments.
        RFFMRP07 (for rebuilding sales orders in FM). This program posts selected sales orders and rebuilds the relevant data of the open items in Funds Management.
To understand FM itself (which means all the component/module/area) please check the following menu in help.sap.com
SAP ERP Central Component -> Financials -> Public Sector Management ->
Funds Management
There you will find a lot of information related this component that is integrated with FI, CO, MM, SD, PM and so on.
Best Regards,
Vanessa.

How to see the Table Names & Field Names by other than F1 help

Hi Experts
   How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
Rgds

The only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB   - Index for Stock Transport Requisitions for Materi
EINA    - Purchasing Info Record: General Data
EINE     - Purchasing Info Record: Purchasing Organization D
EIPA     - Order Price History: Info Record
EKAB   - Release Documentation
EKAN   - Vendor Address: Purchasing Document
EKBE    - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ    - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH    - Scheduling Agreement Release Documentation
EKEK    - Header Data for Scheduling Agreement Releases
EKES     - Vendor Confirmations
EKET     - Scheduling Agreement Schedule Lines
EKETH   - Scheduling Agreement Schedules: History Tables
EKKI      - Purchasing Condition Index
EKKN    - Account Assignment in Purchasing Document
EKKO    - Purchasing Document Header
EKPA     - Partner Roles in Purchasing
EKPB     - "Material Provided" Item in Purchasing Document
EKPO    - Purchasing Document Item
EKPV    - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS    - ERS Procedure: Goods (Merchandise) Movements to b
EKUB    - Index for Stock Transport Orders for Material
EORD    - Purchasing Source List
EQUK    - Quota File: Header

How to see Accounting

Similar Messages

Maybe you are looking for