How to see additional individual search helps in sh for PERNR
Hi,
In this moment I see only 3 tabs in search help for PERNR. But there are about
20 search helps. How can I activate them ?
I tried to do it by program DBPNPGMC but it didn't help.
Thank you very much
Irena
Hi irena,
1. Attach the search help PREM
for pernr.
2. It has got many different kinds of 20-30 helps inside it.
regards,
amit m.
Similar Messages
-
How to remove additional of search help?
In complex standard of search help S_MAT1 has added the additional of search search help ZTEST_SEARCH, now I wish to remove the additional of search help ZTEST_SEARCH, but at removal attempt the error stands out: "Because of use in objects of the dictionary it is impossible to spend removal".
We look magazine of use for additional of search help ZTEST_SEARCH - shows use only in standard of search help S_MAT1. And how to be, how to remove additional of search help?hi,
try to do the where used list of ZTEST_SEARCH for all the objects, programs, function moduels, exits, screens etc etc....any of the object may be using your search help.......
hope this helps,
thanks,
tanmaya -
How to make custom append search help tab default for all users?
I've implemented my own search help append and I need to make the F4 search help to display my tab as default for all users. I know that search help stores the last tab used by the user in memory and when user uses the search help next time the last used tab is displayed but I have to make the system display the tab od my search help append always as default tab. Any idea how to do it?
Message was edited by:
Marcin Milczynskihi
<b>Enhancement using Append structures</b>
Append structures allow you to attach fields to a table without actually having to modify the table itself. You can use the fields in append structures in ABAP programs just as you would any other field in the table.
Click on the append structure tab and opt to create new
structure.
Append structures allow you to enhance tables by adding fields to them that are not part of the standard. With append structures; customers can add their own fields to any table or structure they want.
Append structures are created for use with a specific table. However, a table can have multiple append structures assigned to it
Customers can add their own fields to any table or structure they want.
The customer creates append structures in the customer namespace. The append structure is thus protected against overwriting during an upgrade. The fields in the append structure should also reside in the customer namespace, that is the field names should begin with ZZ or YY. This prevents name conflicts with fields inserted in the table by SAP -
How to find an existing search help?
Hi Friends,
How to find an existing search help for some certain fields? for example search help "H_TVKO" is for "Help view for Sales Organizations"[for the field VKORG], and search help "MAT1" is for "Find Material Number"[for the field MATNR]...... but how to find these search helps for a certain field?
Thanks a lot!!Hello Qiwei,
You can find the search help using their table and fields name.
simply you have to point the cursor on same field for which you want to see search help in SE11.and then in same window search help tab available click on this..
It will show all search help which is having same field.
Have a Nice Day.
Regards,
Sujeet
Edited by: Sujeet on Jan 14, 2009 10:41 AM -
Web dynpro for abap how to create a customize search help in alv column
hi:
Web dynpro for abap how to create a customize search help in alv column and put search help value into alv column?
Are there specific examples ?
thanks!!HI:
I want to created a freely programed help which include date&time,and put help value to alv column.
I have created a freely programed help in web dynpro for abpa application,I refer:
**************** - WebDynpro for ABAP
but have a problem!
If you focus on the the input field in the first row, you get the value help
However if I go to the second row and focus on the same input field in this column, I don't get the value help:
What is a good way to solve similar problems?
thanks -
How to copy a standard search help to another field
Hi All,
I have a BSP screen in that for one input field i need to copy the standard search help for the Business Partner. Could any one guide me how to copy the standard search help for the business partner into the input field in the BSP screen.
Thanks In advance for the help...
Thanks,
SAP SAPHi,
the BP search is its own web client UI component. For the integration you could check any standard transaction UI component like the BT115H_SLSO, as those contain several partner fields.
Best Regards,
Michael -
How to assign search help using ovs for select options for ALV in web dynpr
how to assign search help using ovs for select options for ALV in web dynpro
Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra -
Custom search help in WD for ABAP
Hi
I have a Text field which does not have any input help. Now I have a custom Search help object in my R/3 store. How do i use this search help object for displaying the values for this Text field. I believe there is some standard method available for this. Kindly help me out.
Regards,
<i><b>Seema</b></i>Context->Dictionary Search Help.
-
Assigning search help (F4 functionality ) for recipient field in IW32
Hi,
my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.hi,
refer to the following link:
http://www.saptechies.com/how-to-add-f4-help-to-a-field-on-screen-module-pool/
i hope it helps
regards -
How to see all users who are allowed permissions for the specified entity ?
How to see all users who are allowed permissions for the specified entity ?
And change user permissions for the current entity
from Moscow with moneyVincent,
... and how to change entity permissions for some users?
from Moscow with money -
Hi experts,
in transaction CV03N I want to limit the result list (table RECORD_TAB) of the search help CV01 using authority check. The user should not even see the document shorttext (from table DRAT) of some TOP SECRET documents in the F4-help result ... Actual solution: no user has rights for CV03N ... :-P
I found out, that the search help for the dynpro field DRAW-DOKNR is CV01,
including following search helps:
CV01T
CV01O
CV01C
CV01B
CV_TREX
Also there is a search help exit (function modul) COM_SE_F4_HELP_EXIT for CV01.
I tried to enhance the search help exit using the prepared BADI COM_SE_F4_RESULT_ITEMS, but after i did a short test with the relevant method, i found that there is something not working as i expected ...
Problem:
in the function modul COM_SE_F4_HELP_EXIT there is a step prepared called STEP SELECT.
* STEP SELECT (Select values)
* This step may be used to overtake the data selection completely.
* To skip the standard seletion, you should return 'DISP' as following
* step in CALLCONTROL-STEP.
* Normally RECORD_TAB should be filled after this step.
* Standard function module F4UT_RESULTS_MAP may be very helpfull in this
* step.
IF CALLCONTROL-STEP = 'SELECT'. "here i put Session BREAK-POINT
PERFORM STEP_SELECT
TABLES SHLP_TAB
RECORD_TAB
CHANGING SHLP
CALLCONTROL.
* Don't process additional STEP. ..
RETURN.
ENDIF.
But after i put a BREAK-POINT and than start CV03N, searching a document via F4 + press ENTER, no debugging (!).
I have to mention that the search help proceeded was CV01T.
Question:
can anyone explain why STEP SELECT is not proceeded in FM COM_SE_F4_HELP_EXIT using F4-help in transaction CV03N?
I appreciate any hint in my "search help combat"
regards
Jörg
Edited by: Thomas Zloch on Apr 26, 2011 10:11 PM - please do not promise "re-ward"INCLUDE with FORM
***INCLUDE LZCV_SHLPF01 .
* nach dem Muster der Suchhilfe SAPBC_GLOBAL_F4_SFLIGHT
* ausführlich Doku siehe dort und in den einz. incl. FB Dokus
*& Form AUTHORITY_CHECK
* text
* -->P_RECORD_TAB text
* -->P_SHLP_TAB text
* <--P_SHLP text
* <--P_CALLCONTROL text
FORM authority_check
TABLES shlp_tab TYPE shlp_desct "#EC NEEDED
record_tab STRUCTURE seahlpres
CHANGING shlp TYPE shlp_descr
callcontrol TYPE ddshf4ctrl.
* Ablauf:
* 1. GET Inhalte der Suchilfe Parameter (siehe SE11, CV01T)
* 2. Feldinhalte in interner Tabelle anpassen (--> no Authority)
* 3. PUT neue Inhalte der Suchhilfe Parameter an Ergebisliste übergeben
* Teil 1
* ¯¯¯¯¯¯
CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET' "Inhalte Parameter DOKAR holen
EXPORTING
parameter = 'DOKAR' "CV01T
fieldname = 'DOKAR' "it_drat
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
results_tab = it_drat
CHANGING
shlp = shlp
callcontrol = callcontrol.
CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET' "Inhalte Parameter DKTXT holen
EXPORTING
parameter = 'DKTXT' "CV01T
fieldname = 'DKTXT' "it_drat
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
results_tab = it_drat
CHANGING
shlp = shlp
callcontrol = callcontrol.
* Teil 2
* ¯¯¯¯¯¯
LOOP AT it_drat.
AUTHORITY-CHECK " here prepare the change of Paramaters
OBJECT 'C_DRAW_DOK'
ID 'DOKAR'
FIELD it_drat-dokar.
IF sy-subrc NE 0.
it_drat-dktxt = text-001.
* [!]Text ausgeblendet...Auth.Check(DOKAR)
MODIFY it_drat.
ENDIF.
ENDLOOP.
* Teil 3
* ¯¯¯¯¯¯
CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
EXPORTING
parameter = 'DKTXT' "CV01T
fieldname = 'DKTXT' "it_drat
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = it_drat
CHANGING
shlp = shlp
callcontrol = callcontrol
* EXCEPTIONS
* PARAMETER_UNKNOWN = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " AUTHORITY_CHECK -
How to create user exit search help
Hi,
I have created a search help from se11 with a field (PT9653-ZDOCENTE) of table control.
Now I want to fill another field (PT9653-ZMATERIA) of table control when the user select a value in the search help.
How do I do it?
I read that I must use a user exit, is it correct?
could you give me some examples?I have created a exit that should upgrade the second field with the function
dynpvaluetab2-fieldname = 'PT9653-ZDOC_TXT'.
WRITE wa_nome TO dynpvaluetab2-fieldvalue.
dynpvaluetab2-stepl = sy-stepl.
APPEND dynpvaluetab2.
CLEAR dynpvaluetab2.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = 'MP965300'
dynumb = '2000'
TABLES
dynpfields = dynpvaluetab2.
but it is not work.
Instead, if the first use F4IF_INT_TABLE_VALUE_REQUEST to see the search help and then the DYNP_VALUES_UPDATE to update the other fields work.
SELECT objid stext FROM hrp1000
INTO CORRESPONDING FIELDS OF TABLE tab_materie
WHERE plvar EQ '01'
AND otype EQ 'ZM'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'OBJID'
dynpprog = sy-repid
dynpnr = '2000'
dynprofield = 'PT9653-ZMATERIA'
value_org = 'S'
TABLES
value_tab = tab_materie
return_tab = tb_ret_conc
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE s000(zh) WITH 'Non trovati record per questa selezione'.
ENDIF.
GET CURSOR FIELD pt9653-zmateria LINE riga_corrente.
READ TABLE tb_ret_conc INDEX riga_corrente.
REFRESH dynpvaluetab.
dynpvaluetab-fieldname = 'PT9653-ZMATERIA'.
WRITE tb_ret_conc-fieldval TO dynpvaluetab-fieldvalue.
dynpvaluetab-stepl = riga_corrente.
APPEND dynpvaluetab.
CLEAR dynpvaluetab.
READ TABLE tab_materie WITH KEY objid = tb_ret_conc-fieldval.
dynpvaluetab-fieldname = 'PT9653-ZMAT_TXT'.
WRITE tab_materie-stext TO dynpvaluetab-fieldvalue.
dynpvaluetab-stepl = riga_corrente.
APPEND dynpvaluetab.
CLEAR dynpvaluetab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = dynpvaluetab.
bold The problem is that for this field, I need a collective search help , and therefore I can not use the F4IF_INT_TABLE_VALUE_REQUEST. bold -
Sorry - Could you please help me how can I achieve this Search help ?
I am creating search help for the profit_center field,
For the search help :
The scenario is I have three Z-tables.
Example: The Data in tables are as shown below ( where F1, F2 are the fields ).
Ztable1
F1
A
B
C
D
Ztable2
F1 F2
A 1
A 2
B 112
B 113
C 34
D 43
D 55
D 87
Ztable3
PRCTR F1 F2
123 A 1
124 A 2
123 B 112
124 B 113
125 C 34
123 D 43
124 D 43
125 D 43
I need to create search help (Search Help is similar to Collective Search Help) for the field PRCTR of table Ztable3 like as below.
By pressing F4 on the field, a pop up should appear which should contains text labels& text fields on TAB-Screen ( A, B, C , D as shown below as text lables )against which text fields should appear.
TAB-Screen :
A ____________
B ____________
C ____________
D ____________
If F4 is pressed on I/O field (text fields) against A in the above TAB-Screen, Corresponding values ztable2-F2 of A from ztable2 ( = 1, 2 ) should appear as F4 help.
so that user can select ...
Is it possible to acieve this ? It would be a great help ....How can I achieve this ?
Finally based on above user selections say
A ____________
B ____________
C ____________
D ____________
corresponding prctr values should be collected.<b>You can acheive this .... first by creating the search help exit ... by creating the maintaince view then using it in the Creation of the search help </b> ...
see the link for attaching the view to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish -
Hi,
I need to enhanse search help and add F4 functionality to display list of company codes when cursor is in PBUKR field. I put F4IF_INT_TABLE_VALUE_REQUEST
into the user exit but nothing works.
I get error that PROCESS is not defined. If I remove that line there is no error but nothing works.
Can someone tell me what is wrong in the code below.
Thank you.
FUNCTION z_hr_shlp_wbs_element.
""Local interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
TABLES: prps.
DATA: it_prps LIKE prps OCCURS 0 WITH HEADER LINE.
DATA: status_tab LIKE jstat OCCURS 0 WITH HEADER LINE.
DATA: l_posid LIKE prps-posid.
DATA: l_subrc LIKE sy-subrc.
DATA: l_pbukr LIKE prps-pbukr, " Added by vr
value TYPE DDSHIFACE-VALUE.
EXIT immediately, if you do not want to handle this step
IF callcontrol-step <> 'SELONE' AND
callcontrol-step <> 'SELECT' AND
" AND SO ON
callcontrol-step <> 'DISP'.
EXIT.
ENDIF.
------------------------------------------------------ added by vr
PROCESS ON VALUE-REQUEST.
FIELD PRPS-PBUKR MODULE PBUKR.
DATA: BEGIN OF VALUE_TAB OCCURS 0,
LPBUKR LIKE PRPS-PBUKR,
LPOSID LIKE PRPS-POSID,
END OF VALUE_TAB.
DATA: BEGIN OF RETURN_TAB OCCURS 0.
INCLUDE STRUCTURE DDSHRETVAL.
DATA END OF RETURN_TAB.
SELECT PBUKR POSID FROM PRPS UP TO 20 ROWS
INTO TABLE VALUE_TAB WHERE SLWID = 'QLT UDF'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'PBUKR'
WINDOW_TITLE = 'Statusselektion'
VALUE_ORG = 'S' "hierdurch kann die Struktur genommen werden
TABLES
VALUE_TAB = VALUE_TAB
RETURN_TAB = RETURN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
end of additions
STEP SELONE (Select one of the elementary searchhelps)
This step is only called for collective searchhelps. It may be used
to reduce the amount of elementary searchhelps given in SHLP_TAB.
The compound searchhelp is given in SHLP.
If you do not change CALLCONTROL-STEP, the next step is the
dialog, to select one of the elementary searchhelps.
If you want to skip this dialog, you have to return the selected
elementary searchhelp in SHLP and to change CALLCONTROL-STEP to
either to 'PRESEL' or to 'SELECT'.
IF callcontrol-step = 'SELONE'.
PERFORM SELONE .........
EXIT.
ENDIF.
STEP PRESEL (Enter selection conditions)
This step allows you, to influence the selection conditions either
before they are displayed or in order to skip the dialog completely.
If you want to skip the dialog, you should change CALLCONTROL-STEP
to 'SELECT'.
Normaly only SHLP-SELOPT should be changed in this step.
IF callcontrol-step = 'PRESEL'.
PERFORM PRESEL ..........
EXIT.
ENDIF.
STEP SELECT (Select values)
This step may be used to overtake the data selection completely.
To skip the standard seletion, you should return 'DISP' as following
step in CALLCONTROL-STEP.
Normally RECORD_TAB should be filled after this step.
Standard function module F4UT_RESULTS_MAP may be very helpfull in this
step.
IF callcontrol-step = 'SELECT'.
Maximum records are set to 0 because the counter for Max records keeps
running, even if you filter out certain records. This is a similar
problem as described in OSS Note 148525.
Feb 3, 2004 LS: devk907353
(maxrecords = 0 defaults to maxrecords 500)
As of release 4.7, it appears that maxrecords is
being considered on the read of the view, rather
than prior to presenting the selection list.
When only 500 records are passed into this exit,
the subsequent evaluation yields very few records
in the selection list. By setting maxrecords to
8000, the entire contents of the view are passed
to this user exit, and therefor the search help
yields a reasonable selection list to the user
(as was the case in release 4.6b).
callcontrol-maxrecords = 0. " devk907353
callcontrol-maxrecords = 8000. " devk907353
PERFORM STEP_SELECT TABLES RECORD_TAB SHLP_TAB
CHANGING SHLP CALLCONTROL RC.
IF RC = 0.
CALLCONTROL-STEP = 'DISP'.
ELSE.
CALLCONTROL-STEP = 'EXIT'.
ENDIF.
EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
Added by vr, Nov. 2007 ---------------------------
CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
EXPORTING
PARAMETER = 'PBUKR' " Reference to search help parameter
IMPORTING
VALUE = value
TABLES
SHLP_TAB = shlp_tab
RECORD_TAB = record_tab
CHANGING
SHLP = shlp
CALLCONTROL = callcontrol.
l_pbukr = value.
End of additions by vr ---------------------------
STEP DISP (Display values)
This step is called, before the selected data is displayed.
You can e.g. modify or reduce the data in RECORD_TAB
according to the users authority.
If you want to get the standard display dialog afterwards, you
should not change CALLCONTROL-STEP.
If you want to overtake the dialog on you own, you must return
the following values in CALLCONTROL-STEP:
- "RETURN" if one line was selected. The selected line must be
the only record left in RECORD_TAB. The corresponding fields of
this line are entered into the screen.
- "EXIT" if the values request should be aborted
- "PRESEL" if you want to return to the selection dialog
Standard function modules F4UT_PARAMETER_VALUE_GET and
F4UT_PARAMETER_RESULTS_PUT may be very helpfull in this step.
IF callcontrol-step = 'DISP'.
DEVK909420 Begin
SELECT * FROM prps INTO TABLE it_prps
WHERE belkz = 'X'.
Changed by vr, Nov. 2007
IF l_pbukr <> ''.
SELECT * FROM prps INTO TABLE it_prps
WHERE belkz = 'X'
AND fkstl <> ''
AND pbukr = l_pbukr.
ELSE.
SELECT * FROM prps INTO TABLE it_prps
WHERE belkz = 'X'
AND fkstl <> ''.
ENDIF.
End of changes
DEVK909420 End
SORT it_prps BY posid.
LOOP AT record_tab.
l_posid = record_tab+96(24).
READ TABLE it_prps WITH KEY posid = l_posid.
IF sy-subrc = 0.
CALL FUNCTION 'STATUS_READ'
EXPORTING
objnr = it_prps-objnr
only_active = 'X'
TABLES
status = status_tab.
DEVK909329 Begin
read table status_tab with key inact = ''
stat = 'E0001'.
if sy-subrc is initial.
read table status_tab with key inact = '' "DEVK909345
stat = 'I0002'. "DEVK909345
endif.
DEVK909329 End
ENDIF.
IF sy-subrc NE 0.
DELETE record_tab.
ELSE.
IF record_tab+114(1) EQ '.' AND
record_tab+115(1) EQ '9'.
DELETE record_tab.
ELSE.
DEVK909420 Begin
IF record_tab+102(1) EQ '9'.
DELETE record_tab.
ELSEIF record_tab+104(1) EQ '9'.
DELETE record_tab.
ENDIF.
DEVK909420 End
ENDIF.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
ENDFUNCTION.Hi Vitaly,
Process on Value Request and search help exit is entirely two idea to display the f4 values.please remove the PROCESS ON VALUE REQUEST from the function module.write the required select statements after CHECK callcontrol-step EQ 'SELECT' . and pass the value to the function module
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = l_record
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF ( sy-subrc = 0 AND l_record IS INITIAL ).
MESSAGE 'No values found' TYPE 'S'.
ENDIF.
callcontrol-step = 'DISP'.
Find the documentaion for this function module for further help
message edited by
shibu -
How to delete entries from search help for a field
hi guys
how r u all doing.
i have some questions for u.
1. How can i delete some entries(from a list of many) from search help of a field with out (writing)going to a program.
2.in PA10 (Personnel File),when i try to display data for a pernr,i am getting an error saying that infotype 122 doesnot exist.
3.Again in Pa20,when i try to display data for a custom infotype,it leads me to short dump saying that load program does not exist.
any help in this regard,wud be appreciated.
thanksFollow this
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Maybe you are looking for
-
I want to run jasper Report as pdf to display arabic letter
i want to run jasper Report as pdf to display arabic letter butv when i use byte[] bytes =JasperRunManager.runReportToPdf(report,parameters, conn); display ????? i hope anybody to help me thanks Edited by: Amr Ahmed on May 2, 2011 2:08 AM
-
Upgrading to APEX 3.2 in XE, which web server am I using?
New user, so much to learn, begin with the idiot stuff. I have a new install of XE under Windows and was not asked about PL/SQL gateway or Apache. I want to upgrade APEX and may as well stick with I am already using, so ... How do I tell whether I am
-
Oracle stored procedure VS TOOL
We are interested in having feedback on the possibility of using Oracle stored procedure versus TOOL code to perform db access ( typically, you can provide a stored procedure that implements a SO method ). In particular we are working on several proj
-
HT4108 iPad 2 and HDMI converter issues
Does anyone have an ipad 2 and find that most mirroring works fine EXEPT video (sound, but no picture) and Keynote (I can see the slides up until I try to play my show, then TV goes black)? I have a presentation in a week; please help!
-
Can't add to collaborative playlist
I am trying to use the collaborative playlist feature for the first time. I made my playlist collaborative and sent the link to a freind. When she clicks on the link she goes to a URL on play.spotify.com and she can see the playlist but can't add to