How to see and enter discretionary hyphens?

Hi everybody!
Thank you in advance for thinking with me on this problem!
I just started to work with Pages yesterday and immediately I encountered a serious problem. When opening a Word file in Pages I realized that all discretionary hyphens which this file included where gone! Moreover, I found no way to create a new discretionary hyphen. Since I work mostly with foreign language texts I do rely a lot on these hyphens. And the languages I work with are mostly Eastern Europe languages which are not covered in Pages or in most other programs.
Is there a way to enter discretionary hyphens in Pages and to make previously entered hyphens visible?

If you do a search on "soft hyphen" in the forum you can find earlier discussions. I think Pages does not yet support it the way you need it to.
http://discussions.apple.com/thread.jspa?messageID=6311846&#6311846

Similar Messages

How to SEE and USE Pulse Counter Output signal INSIDE my VI?????

Hello.
I am using a 6216 AOM board and I currently need to generate a 50 kHz signal for an external AOM, and this has been no problem.
However, I also need to be able to SEE and USE this signal in my VI
(for example, to be able to view the signal in a graph, and more
importantly, to be able to use the signal as an input for a software
based Lock-In Amplifier).
How can I do this?
I've been reading about routing signals and I believe I can do this,
however, the routing does not solve the problem that I need to be able
to see and use the signal inside my software.
Please help!
Sincerely
JSL

HI JSL!
When you route the signal, you can “see” in an input channel the signal been generating by the output channels being routed, but you need to create the code for the acquisition and this code must have synchronization (start trigger and same sample rate) with the generation code. Then we can use it.
If this is what you need, please let me know so that we can work on generating a little example. Can you give me more details about how is the signal (sample rates, etc.)?
Please let me know in case I misunderstood your problem.
Tania Lozoya | National Instruments

HT1695 when conecting wifi i put wrong password how to reset and enter password again

I purchase new Ipad3 while configuring I pur wrong password for wifi, how to reset and re enter password

If I recall correctly, I think you have to restart the iPad in order to start all over again. There is no way to backtrack - from what I can remember.
If you can't backtrack, and restarting the iPad doesn't work, you can always activate the iPad using iTunes on your computer.

How to see and edit archieve tables?

Please let me know how to see the archieve tables and thier contents. Also, please let me know how to edit them i.e. to modify the table?
Thanks in advance!
Suman

check tcode SARA

How to see and edit the SOURCE

I'd like to see and edit the source of my pages on iWeb, is it possible ?
Thanks

A favorite among many is Taco. There is also a collection of other iWeb tools and resources here.
-Mark

How to display and enter Chinese in the application?

Hi,everyone,I encounter such the problem about characterset.When I run the application on the jdeveloper3.1,I can't enter or display chinese,but VisualAge3.0 can do it.I don't know how to solve it?
Thanks in advance!

There may be a simpler answer... but
Generally speaking, the latest version of the JDK 1.3 does a much better job with internationalization / localization.
As you know, you can switch JDK's that JDeveloper works with (documented in help)
so that JDeveloper can work with JDK 1.3.
I would suggest you use JDK 1.3 RC2 or higher and see if this solves your problem.
One reason that Visual Age works is probably due to VA is using the IBM libraries which include additional enhancements.
Other comments/suggestions welcome,
-John
null

How to see and add usernames from other forest in User Profile Synchronization

Hello Community
    Using Sharepoint 2010 Server there are 2 forests each containing their
domain users, lets call them Forest1/Domain1 and Forest2/Domain2 and their
is a one-way trust relationship between the two forests.
    The users are in Forest2/Domain2 but Sharepoint is on Forest1/Domain1. The
only way I have been able to add the users from Forest2\Domain2 to the Forest1\Domain1
has been to create a domain local group and an OU in Forest1\Domain1 and then put the
domain local group into the OU so that I can perform a UPS Synchronization on those
users (I also create a group on the Sharepoint 2010 Server add the users there too).
    The problem is that when I run the UPS Synchronization I can select the
checkbox for the domain local group but the individual usernames are not displayed in the
Synchronization process of populate container.
    The only names that get Synchronized are the Sharepoint Service Accounts and
the usernames that were created in Forest1\Domain1 AD.
    Consequently when users in Forest2\Domain2 logon they can access the intranet web appl
in Forest1\Domain1 by entering the url in the address box, but they cannot create a
My Site when the click their username because they get an error stating:
    "This page can't be displayed".
    But username created in Forest1\Domain1 can access the intranet web appl and
can create a My Site.
    I noticed that the difference is when users from Forest2\Domain2 get the error message
in the address box I see the My site url but it is missing "default.aspx" page which is
the page that contains My Content and My Profile and is the page that can't be displayed.
    But the users from Forest1\Domain1 have the My Site url in the address box with
"default.aspx" appended and therefore can create their My Site.
    The other problem is that when I go to the My Site url page and I go to People
and groups, I can add the OU that was Synchronized but I guess since I didn't see the
individual usernames I can't add the users from Forest2\Domain2 from the people picker
because the people picker error says:
   "no match found".
    But the people picker finds the users created in Forest1\Domain1.
    How do I make usernames visible when Synchronizing those usernames in the UPS Synchronization
process and be able to find them in people picker?
    Thank you
    Shabeaut

stsadm -o setapppassword -password<password
stsadm -o setproperty -url <url> -pn “peoplepicker-searchadforests” -pv “forest:<source forest>;domain:<trusted domain>,<trusted domain>\<account>,<password>“

How to See and Change the Source Code of Spawned Concurrent Program.

Hello Team,
There is one requirement in which we have to add some condition in the Concurrent Program.But the Type of that concurrent Program is ,"Spawned ".
Please suggest me , how can i check the Source code for this type of Concurrent Program and how can i make the changes to satisfy the requirement.
Thanks & Regards

There is one requirement in which we have to add some condition in the Concurrent Program.But the Type of that concurrent Program is ,"Spawned ".
Please suggest me , how can i check the Source code for this type of Concurrent Program and how can i make the changes to satisfy the requirement.Please see old threads, it should answer your question -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Spawned+AND+Concurrent+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to see and clear the blocked threads

Where can I see how many threads are currently running and how many threads are blocked and how many are in idle status.
Where can I see all these information and if I want to kill the blocked threads how to do that
Thanks in advance

This can be found in Weblogic Log folder..

How to see and use MS Word files

What is the best App to download, edit, and store MS Word, Excel, and Powerpoint Files on the iPad2?

'Best' will be down to personal preference. But some of the top sellers are, firstly from Apple :
Numbers (support Excel) - http://itunes.apple.com/us/app/numbers/id361304891?mt=8
Pages (supports Word docs) - http://itunes.apple.com/us/app/pages/id361309726?mt=8
Keynote (Powerpoint) - http://itunes.apple.com/us/app/keynote/id361285480?mt=8
Third-party apps which support all three document types :
Documents To Go - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
'premium' version (edit Powerpoint, not just view) -
http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8
QuickOffice HD - http://itunes.apple.com/us/app/quickoffice-pro-hd/id376212724?mt=8

How to find and enter master password ?

Show how to fnd my master password

Sorry, but that isn't possible. What is this master password for?

HT5429 Apple maps has my wrong home address how to delete and enter correctly!

With new apple maps it doted my home address incorrectly and I cannot change it or delete it, help

Report the problem as Malcolm has said - but don't expect it to be corrected any time soon
i reported my address as incorrect several times since September - it's still wrong
download the new google maps app and try that - you will need to copy the address from contacts and paste to the search field (for now at least) but that not a big deal to locate your intended destination

Help! Problems with Automatic and Discretionary Hyphens from FrameMaker

Does anyone know how to prevent RoboHelp from picking up automatic and discretionary hyphens from linked FrameMaker files?
I'm in a situation where I need to use automatic hyphens (and sometimes discretionary hyphens to prevent strange breaks) in my chapter titles and heading 1s. RoboHelp is great about ignoring the auto/disc hyphens in inline text (i.e., the titles and heading do not include the hyphen because they are not needed).
For example:
This Heading in FrameMaker...
Appears as this in RoboHelp...
Which is...
Recording
Service Infor-
mation
Recording Service Information
Correct
RoboHelp fails, however, when it comes to including the auto/disc hyphens in cross references and filenames. Even if the cross-reference text appears correctly in FrameMaker, the hyphens always show up in the cross-reference text in RoboHelp.
For example:
This Cross-Reference in FrameMaker...
Appears as this in RoboHelp...
Which is...
Recording Service Information
Recording Service Infor-mation
Incorrect
Additionally, the filename given is "Recording_Service_Infor-mation.htm" which is not what I want.
Why is RoboHelp smart enough to ignore the automatic and discretionary hyphens in inline text, but not smart enough to ignore them in cross-reference text and file names?
Is there a seeting I can change to fix this? thank you very much for any help you can provide!!
System Info:
Windows XP SP3
Technical Communication Suite 2 (FrameMaker 9.0p255 and RoboHelp 8.0.2.208)

Normally the hyphens are handled fine in RoboHelp. However, there seems to be a specific scenario where you are facing issue as mentioned by you. It will be great if you can share a sample FrameMaker document leading to such an issue when converted in RoboHelp. You can upload the document at acrobat.com or any other location and share the download URL.
Also, please specify any settings/mappings applied for FM document conversion.
Mayank

I just bought my export pdf but if I sing in and enter in my plan I don't see it, why? when can I start using it?

I just bought my export pdf how can i start using it? if i sign in & look for my export pdf I am sent to the page to pay it again??? Could you help me please?

Hi florence,
Thanks but it did not work.
I bougth the Export PDF for power point but I do not see it in my account
and if I clicked in my orders buttons, nothing appears, it seems my
purchase is lost. Could you help me to verify it, I did it yesterdar
September 22, 2014 around 10:30 in the morning Mexico time. Or how do I get
my funds back?
Regards
Fabiola
2014-09-23 5:50 GMT-05:00 florencejohn <[email protected]>:
I just bought my export pdf but if I sing in and enter in my plan I
don't see it, why? when can I start using it? created by florencejohn
<https://forums.adobe.com/people/florencejohn> in Adobe ExportPDF - View
the full discussion <https://forums.adobe.com/message/6755125#6755125>

Grep - Discretionary hyphen and discretionary line break

Hi,
Trying to inset the discretionary hyphen in before the "m-dash word" and discretionary line break after the m-dash. If applied type styles with-in this text (bold & italic), before the first character of m-dash is changed in roman. Can you please look into the below screen-shots and guide to me, how to avoid this.
Before:
After:
code:
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findChangeGrepOptions.includeFootnotes = true;
app.findChangeGrepOptions.includeHiddenLayers = false;
app.findChangeGrepOptions.includeLockedLayersForFind = false;
app.findChangeGrepOptions.includeLockedStoriesForFind = false;
app.findChangeGrepOptions.includeMasterPages = false;
app.findGrepPreferences.findWhat = "([\\l\\u]+)~_";
app.changeGrepPreferences.changeTo = "~-$0~k~-";
app.documents.item(0).changeGrep();

Try this,
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences.findWhat = "([\\l\\u]+)(?=—)";
app.changeGrepPreferences.changeTo = "~-$0";
app.documents.item(0).changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
app.findGrepPreferences.findWhat = "([\\l\\u]+)~_";
app.changeGrepPreferences.changeTo = "$0~k~-";
app.documents.item(0).changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;
Vandy

How to see and enter discretionary hyphens?

Similar Messages

Maybe you are looking for