How to SEE and USE Pulse Counter Output signal INSIDE my VI?????

Hello.
I am using a 6216 AOM board and I currently need to generate a 50 kHz signal for an external AOM, and this has been no problem.
However, I also need to be able to SEE and USE this signal in my VI
(for example, to be able to view the signal in a graph, and more
importantly, to be able to use the signal as an input for a software
based Lock-In Amplifier).
How can I do this?
I've been reading about routing signals and I believe I can do this,
however, the routing does not solve the problem that I need to be able
to see and use the signal inside my software.
Please help!
Sincerely
JSL

HI JSL!
When you route the signal, you can “see” in an input channel the signal been generating by the output channels being routed, but you need to create the code for the acquisition and this code must have synchronization (start trigger and same sample rate) with the generation code. Then we can use it.
If this is what you need, please let me know so that we can work on generating a little example. Can you give me more details about how is the signal (sample rates, etc.)?
Please let me know in case I misunderstood your problem.
Tania Lozoya | National Instruments

Similar Messages

  • How to see and use MS Word files

    What is the best App to download, edit, and store MS Word, Excel, and Powerpoint Files on the iPad2?

    'Best' will be down to personal preference. But some of the top sellers are, firstly from Apple :
    Numbers (support Excel) - http://itunes.apple.com/us/app/numbers/id361304891?mt=8
    Pages (supports Word docs)  - http://itunes.apple.com/us/app/pages/id361309726?mt=8
    Keynote (Powerpoint) - http://itunes.apple.com/us/app/keynote/id361285480?mt=8
    Third-party apps which support all three document types :
    Documents To Go - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
         'premium' version (edit Powerpoint, not just view) -
         http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8
    QuickOffice HD - http://itunes.apple.com/us/app/quickoffice-pro-hd/id376212724?mt=8

  • Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?

    Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
    So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
    So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
    When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
    Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
    Thanks for your help in advance.

    I have the same question but I am using two pc's

  • I Just received the update to iTunes, when I I look at the screen I do not see the normal icons.  When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

    I Just received the update to iTunes, when I I look at the screen I do not see the normal icons.  When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

    I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account?  I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

  • HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?

    HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?
    I understand the instructions to create a new account id (apple id) from the old aol account. However, does this mean my purchases will be split into 2 accounts; or does the fact that I currently see everything under my apple id (regardless of the purchased by username) mean this will all still appear in my current account as it does now?

    You see them where when you login your non-AOL account ?
    If you currently have two accounts (the AOL username account and an email address account) then you will continue to have two accounts, and nothing should change when you update the AOL account to be an email address (apart from how you access that account).
    You will just be renaming the account to have an email address for accessing it, not creating a new account.

  • HOW TO CREATE  and  USE EVENTS IN WORKFLOWS .

    HOW TO CREATE  and  USE EVENTS IN WORKFLOWS with the help of classes.
    What i am doing is..
    open se24
    event tab->event name->parameters
    method tab->method name->event handler->copy parameters
    interface tab->if_workflow->enter
    tell me what else to do step by step
    Another important thing is that HOW to use these class events to trigger the workflows.
    REPLY ASAP
    THXS IN ADVANCE

    Hi,
    Pl. see this blog...
    Raising ABAP OO events for workflow
    Regards,
    JOy.

  • How to Create  and use of Coherence servers in weblogic serevr 11g (10.3.6)?

    how to Create  and use of Coherence servers in weblogic serevr 11g (10.3.6)?

    See the below discussion
    How to create and use Webservice controls using WSDL in weblogic portal10.3
    Thanks,
    Venkat Sarvabatla

  • Could you let me know how to enable and use ITS on SAP ECC5  and ECC6

    Could you let me know how to enable and use ITS on SAP ECC5  and ECC6

    Hello Tina,
    please see here
    in tree select "Installation and Activation"
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm</a>
    best regards

  • Hello guys..does anybody know how to install and use adobe master collection with the new lion?   I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...   I am a new mac users and I'd like t

    Hello guys..does anybody know how to install and use adobe master collection with the new lion?
    I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
    I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

    Lab79 wrote:
    Are you on Apple's payroll?
    well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
    good luck with apple dude..
    Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
    And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
    <The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
    Great suggestion. You should go with that one, but good luck getting a refund.
    Bye

  • How to generate and use Matlab(R2007) .dll's in Labview

    Is there a step-by-step example on how to generate and use Matlab(R2007)  .dll's in Labview.
    Our experimenal hardware is LabView-controlled and we want to pass
    images/2d intensity arrays to a more complex matlab program that will
    return an array of extracted data which we want to use in LabView again.
    Thank you
    Carsten

    I recommend having a wrapper created around the matlab dll that converts the datatypes for you. There is a lot of fooling around with pointers involved which is very difficult in LabVIEW. btw, this got much more complicated after Matlab 7. Essentially, you need to convert your inputs into mxArrays, and then add those mxArrays to an mxArray list that you pass by pointer into the matlab dll. You also need to create a mxArray list for the outputs from the dll which you will need to extract your data out of before converting it back into a LabVIEW supported datatype. It's a big hassle. We do this pretty often, but we have created a c library that handles all the conversions, so it is feasible for us. Unfortunately, I can't share the library, but hopefully this information will help you get where you want to be.
    Like I said, it would be easier if you can just get a c developer to write a wrapper for you to keep it simple in LabVIEW. Alternatively, you might try getting your m-code to work in Mathscript.
    Chris

  • How to control and use the search criteria values "%" ?

    Hi,
    When I searched some information in my employee name. I filled in search criteria values "%" and selected the "Go" button to see the result. But I got errors that the search criteria values should not begin with a "%" or "_" for at least one if the listed fields.
    How to control and use the search criteria values "%" ?
    Thanks,
    sinolee

    sinolee,
    These kinds of details are mentioned in Dev guide. Always have a look into dev guide before posting.
    --Shiv                                                                                                                                                                                                                                                   

  • If user disable cookie how to set and use session with URL Rewritting

    if user disable cookie how to set and use session with URL Rewritting by append session ID in url

    If cookies are disabled, then app server will automatically try to use URL rewriting for session control. Programmer's responsibility is to encode any links or redirects using
    response.encodeURL("/yourPage.jsp")
    and
    response.encodeRedirectURL("/yourPage.jsp")
    See API for details
    http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpServletResponse.html#encodeURL(java.lang.String))

  • How to Set and Use a global variable within a session?

    Dear All,
    I'm new to jsp, and would like to ask how to set and use a global variable within a session?
    Thanks in advance.
    Regards,
    Cecil

    With session.setAttribute("name",object) you can store a Attribute in the session object.
    with session.getAttribute("name") you can get it.
    That's it.
    Regards,
    Geri

  • How to install and use a plug-in downloaded from the apple site?

    how to install and use a plug-in downloaded from the apple site?

    Emelie,
    which plug-in do you want to install?
    some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
    For others you move the plug-in into to System Library or your User Library:
      Your Hard disk  > Library > Application Support >Aperture > Plug-Ins > Edit
    or
    Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
    If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
    You can tell by the extension, what kind of plug-in it is.
    E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
    Regards
    Léonie
    P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
        Finder >  Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
    To show the System Library:
         Finder >  Go > Go to Folder
    then enter   / Library

  • How to create and use mutable array of UInt8

    Hello!
    If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
    Then how to create and use mutable array of UInt8 pointers?
    The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

    I try
    - (void) scheduleRequest:(UInt8 *)request {
    if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
    [scheduledRequests addObject:request];
    But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

Maybe you are looking for

  • [2008 R2] Hyper-V Dynamic memory warning with half of vHost memory free

    Our virtual server host system has about 19GB of Memory free (out of 32GB total), yet a virtual guest using Dynamic Memory was only being assigned 8GB and the demand was around 13GB, therefore generating a Warning state on the Memory Status. Logging

  • HT4994 How can i import iphone contacts to SIM?

    How can i import iphone contacts to SIM?

  • Golden gate monitoring script for struck processess

    Hi Folks, The requirement is to get an email if any of the golden gate process struck on particular RBA for long time, even there are many tails file to be replicated. The status of the process is running and there is no lag. Thanks, Anand T.

  • Weak References in Listener Lists

    I've found a common source of memory leaks is when objects that add themselves to listener lists forget to remove themselves when they are done. It would be nice to generalize and say that listener lists should contain weak references, but there are

  • Why do I need JSP, Servlets, JSF?

    I want to design web pages in HTML and Javascript and use EJBs to handle business logic. That's it. I don't want to learn another API (ie JSP, Servlets, ...) for designing web pages. Is there a way I can access EJBs from Javascript using XML-based me