How to see changes in production order...w/o using OCM...

Hi
As far as i know without OCM; we can't see changes made in terms of quantity, dates in production order
But is there any alternative way, table or something which shows me changes made in atleast either of two i.e. quantity / dates for a production order
Please give some hint....
Rgds
Edited by: Vicky Khabrani on May 9, 2008 6:37 AM

Hi Pradeep
Thanks for your reply....So this means there is no way out....
By the way in COOIS; where can i see below things...I can't see them.......
Choose following field from "Choose field option"
Changed on
Changed at
Last changer.
I guess something is wrong....Above fiels are not appearing in COOIS
Rgds

Similar Messages

  • How to see cost componentwise production order actual cost-not planned cost

    Hi,
    Can anybody tell me how to see cost componentwise production order actual cost ?
    Thanks,
    Bijay

    Hi,
    CO03->Goto-> costs-> Anlysis
    or use the std. report KKBC_ORD
    std. reoprt MCRI
    KVBI - Actual Costs
    Regards,
    R.Brahmankar

  • How track changes in production order which is already Read PP master data

    Hi Gurus,
    Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order.
    We already created 1 report for that which tracks whatever has been changed in Production Order but having a constraint in it.  That It could not be able to distinguish to which order READ PP MASTER DATA done.
    So my query is how to map that in report. As sytem Status directly changed to CRTD phase.
    Any table which can track the changes once the order been through with READ PP MASTER DATA?
    As there are huge number of Production Order so we can go and open each order to see the Status changes in each and every order.
    Hope to get a reply soon.
    Regards,
    Sap User

    Hi,
    A suggestion:
    Change the specification as, log changes at each save instead of Read PP Master Data, as the changes would become effective only upon save. So if this is acceptable then 2 options, 1. Go with OCM feature or 2. Refer note - 390635
    Revert if you face any issues.
    Regards,
    Vivek

  • Changes in production order/Process order

    Hi Experts,
    Very much hopeful that I will get solutuion of below:
    How or where to see changes done in production / process order.
    e.g Suppose I have created one production order. Then release it in CO02. Then I changed order quantity from 100 to 200 ( Earlier it was 100 ). Then I delete one BOM component from order. Then I changed finish date of order.
    Pls tell me how to track these changes. What configuration need to track these changes. Please tell me step by step procedure.
    I have read related thread in sdn itself but not satisfied.
    Please help.
    Regards,
    Vipul

    Hi,
    For tracking in changes of Production / Process Order, you need to activate Order Change Management (OCM). After activating the same, you can view changes of Production  order in CO02 / CO03.
    for more details of OCM go through following link :
    [Order Change Management (OCM)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/63198843a211d189410000e829fbbd/frameset.htm]
    Hope this helps.
    Regards,
    Tejas

  • Changes in Production Orders

    Hi gurus,
    I want to track changes made by end users in the production orders in a report format. Which will tell what was old value and what is new value.
    What needs to be done for this?

    Dear
    Changes in Production Order can be  traced through following ways :
    1.Order Change Management :
    Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
    Create a Change Number CC01 with Release Key
    In Object Types select/tick "Actv", "object", "MgtRec",
    You get the Change Number by Saving .
    Use this Change Number to Change BOM or Routings
    Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
    Then go to Oder Change Process T Code :- COCM
    Tick Change Number and Select the Change Number & Execute
    Select the Production Order, click on Procurement element icon you get another screen select and execute again.
    You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
    you see the changes in BOM for Production Order i.e. after COCM.
    Then Confirm the Changes in Production Order then New changes will be Active in production Order.
    Use COCM1 to find out the details or CO03--Extra --change
    Please check link  : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
    2.To  get the changes in Production Order apply SAP Note 390635.
    3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
    Regards
    JH
    Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

  • Block Operation Number Change in Production order

    hello,
    How can i block the operation number change in production order if the operation status is CNF...?
    ie either disable the operation number cell or disable the entire row in the production order.
    rgrds
    Krishna.

    hi prashob
    i can't disable the column, as user need to insert operations in between
    AP, 
    I will check for this...
    regards
    Krishna

  • Component number change in production order

    hi experts,
              i want to know tat any standard bapi is available for change in production order
    regards ,
    vinodh.M

    hi gaurav,
              thanks for ur response,i want to know how to use this bapi,any sample coding is there

  • How do I change the chapter order in itunes 11.0.4?

    How do I change the chapter order in itunes 11.0.4? The book chapters used to look like the playlists in music. You could ;change how it was sorted by the name time, artist etc. Now there isn't a catagory label and the background is the same color as the background of the book photo.

    Trent o
    Someone else in the forum told me how to do this.  If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode.  If you don't have Onyx, I'd suggest getting it.  It is freeware and used to help maintain your system.  Good luck
    Paul

  • Assembly to order: change in sales order with change in Production order

    I want to activate change in the sales order data when a production order(which is created w.r.t the sales order) data is changed (Strategy 82 used); I have de-activated "No Update" for the corresponding requirement class 201; also the material for which SO created ,is not a part of any Delivery group.
    But when I am changing the production order (date/qty.), SO isn't getting updated accoringly.
    Please tell me the reason why it isn't happening!!

    Hi
    The sales order requirement can be made as the production order receipt once you save the order in the system.
    so it is possible to change the receipt according to the sales order reqmt if any changes made in the sales order,
    in every entry or changes in the sales order ( if you use the stategy 82) . in back end system explode the BOM and the create the production order as per the order reqmt,
    even while you do the changes mad in the sales and save that time sytem re explode the BOM once again and change the production order qty.
    but if you change the production order , system not re run or explode the BOM , Routing . such setting is not made in the system . so obviously updation will not happen for the sales order .
    Edited by: raj on Jun 9, 2009 11:22 AM

  • IDoc creation on save and change of production order

    I am looking for a way to create, and send if possible (if not I'll send with a batch job), on the save (creation and change) of production orders.  This will be a modified LOIPRO iDoc.  Currently we have a customer exit on the save of the production order but because it is before the save we must predict the number of the prod order.  This has worked but now we are creating one production order per line item in a sales order (automatically) so this is causing us to predict the same production order number twice.  We need a way to automatically create and send an iDoc for all production orders for given plants.  Right now the solution we are looking at is creating an output type and running through those output types a few times a day, sending them down to the Shop Floor system (proprietary system). 
    Is there anything setup in SAP that we can utilize?
    Regards,
    Davis

    Hi Rick,
    Follow the below sample steps for changing component quantity:
    DATA:
        l_methods TYPE bapi_alm_order_method,
        it_boperations TYPE STANDARD TABLE OF  bapi_alm_order_operation_e WITH HEADER LINE,
        it_components TYPE STANDARD TABLE OF bapi_alm_order_component_e WITH HEADER LINE,
        it_components1 TYPE STANDARD TABLE OF bapi_alm_order_component WITH HEADER LINE.
    1. Call BAPI :BAPI_ALM_ORDER_GET_DETAIL , it will give existing order component details.
    CALL FUNCTION 'BAPI_ALM_ORDER_GET_DETAIL'
        EXPORTING
          number        = <production order number>
        TABLES
          et_operations = it_boperations
          et_components = it_components
          return        = it_bapiret2.
    2. Move it_components to components table compatibel to BAPI "BAPI_ALM_ORDER_MAINTAIN".
    LOOP AT it_components.
    MOVE-CORRESPONDING it_components TO it_components1.
    _*"Note here while moving change the component quantity"*_
    APPEND it_components1.
    CLEAR it_components1.
    ENDLOOP.
    3. Build the methods table for change production order :
    it_methods-refnumber = v_refnumber.
                it_methods-objecttype = 'COMPONENT'.
                it_methods-method = 'CHANGE'.
                it_methods-objectkey = v_objectkey.
                APPEND it_methods.
    "Note v_refnumber has 1 to 1 relation ship with the components table, if you want to change First component in it_components1 then you have to enter value '1' here for v_refnumber.
    it_methods-method = 'SAVE'.
            APPEND it_methods.
    4 . Call
    CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
              TABLES
                it_methods   = it_methods
                it_component = it_components1
                return       = it_bapiret2.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

  • How do I change the sort order in the file picker?

    Hi there,
    I've recently hit a problem with the Save and Open dialogs in Mavericks. Some how I have changed the sort order within the Column View so that it sorts by modified date and no longer by name. Unfortunately I can't work out how that happened or how to get it back so that it sorts by Name.
    Please could anyone help?

    Normally, you click on this thing (shown below) and select the sorting preference.

  • How do I change the display order in the VPN menu in the status bar?

    Hello,
    How do I change the display order in the VPN menu in the status bar?
    (in the drop-down menu from this icon) ->
    Thanks.

    Hello. Perhaps this is because you are trying to arrange the order of many VPN services, since only one VPN service can be selected at once in System Preferences. In my original post, I did not mean that; I meant that I wanted to arrange the order of VPN configurations within a VPN service. In this screenshot, I have one VPN service only:
    And in the following one, it is shown that there are more than one VPN configurations within that VPN service:
    Furthermore, it was the order of VPN configurations that I wanted to change, not the order of VPN services. If you are trying to change the order of VPN services, I do not have a solution.

  • How to see the customer purchase order acknowledgement ?

    How to see the customer purchase order acknowledgement ?
    in that PO ACK where we see the UOM and Qty ?
    thanks & regards,
    Srikanth.

    hi
    Customer Purchase Order is nothing but the Sales Order in your system
    Customer Po acknowledgement is nothing but the Acknowledgement that is sent out (output type BA00) to the Customer after the Sales Order has been created.
    Note: Purchase is to Customer - Sales is to you as the Vendor.
    cheers
    Nandu
    Edited by: Nanda Kumar Veeraraghavan on Apr 1, 2008 12:11 AM

  • Mass change on production order (assembly type) to put deletion flag status

    Dear all,
    I've make a mass change on production orders to settle the status DLFL through the Tcode CO78.
    Some of the production orders  are "assembly order" type. Those could not be up-dated with the DLFL because there are linked to customer order. The customers orders are closed.
    What can I do to change the status for this kind of production orders. It is necessary for me to be able to put the DLFL status in order to improve the process of production closure done each month.

    Hi kiran 
    Thanks for the response. As I cannot put deletion indicator on the Assembly order directly, Do we have to put deletion indicator on the sales order item?. If so, Can we put a deletion indicator after the sales order was delivered and invoiced. What exactly have you guys done to put deletion flag on the production order.

  • Changing a production order with CLOI_CHANGES_UPL_31

    Hello All,
    I try to change a production order with the function CLOI_CHANGES_UPL_31 with RFC in .Net.
    The header data is working fine, and i can change the date with this function. But if i try to change the position data i got no message back, but the date is not changed. Is there any customizing to do? And what about the Field "METHOD"?
    Best Regards,
    George

    check the SUCC_CODE - suceess code field, is it configured properly?

Maybe you are looking for