How to see column in table maintenance generator?

Hi All,
Can we write code in table maintenance generator ? where can we write code?
suppose I have created table maintenance generator but column is not visible what might be reason? How to deal with this?
Can any 1 help me in this regard?
Thanks in advance.

Hi,
column is not visible
This may be because of additioni of a new field in the table after you have generated the TMG.
Delete and re-create the object in TMG again.
writing code in table maintenance generator
Yes, you can write.
SE54 --> Environmnt --> Events --> New Entry
Select the event ..eg.
01 for Before saving the data in the database
02 for After saving the data in the database
Press enter. Click on the editor button and start writing your codes in the routine.
Regards,
Firoz.

Similar Messages

How to tie tcode to table maintenance generator table

hi guys,
i need to use tcode to call table maintenance generator program (the one that is created via SM30 ).
how can i use module instead of executable program type ?

> Hi Erwan,
>
> I hv followed ur step, but i didnt see this step
>
> then in the dynpro fields :
> VIEWNAME ztable
> SHOW X
>
> i am currently in ver 4.7
>
> i only see screen, from module pool, name of screen
> fields, value
You type VIEWNAME and SHOW in "name of screen fields", and put your ztable name and X in "Value".
matt

Addition of a new column in Table Maintenance Generator

Hi All,
I have a requirement in which I have to include a new field in Table Maintenance Generator . This field is not present in the table but its data will be fetched from another table . Pls help me in this regard.
I have little idea of Table control .
Regards,
Nibha

Hi Nibha,
Table maintenance generator screen is an automatically generated screen. You cannot to any changes in that and neither can you do the changes in the PBO and/or PAI.
You can do it but it will ask you for SAP key etc. So there's not need to do it that way.
What you could do is;
1. Go to the table maintenence generator from SE11, in Change Mode.
2. Click on change icon. The system will show the 'Change Generation Elements' screen where it sill ask you the resson
    for change.
3. Click on the New Field/Sec. table in struction (or whichever is appropriate/applicable in your case)
4. Press Ok (Tick sign).
5. Then it will show you the ''Change Generation Elements: Detail' screen.Here;
       => You will select the maintenance screen that you wish to change( Overview/Single).
       =>   And the Field Type. Whether it is a key field or normal field.
              Select which ever is applicable.
6. The system will then re-generate the screen for you and - You'll Smile! - that you got the answer!
Cheers!
Sanjiv

How to hide fields in table maintenance generator dynamically.

Hello Experts,
                     I have one requirement and that needs to do dynamically display the fields in table maintenance generator based on the selected radio button.I have written the code in pbo but it is not working properly,can anyone figure me out in this.
Thanks,
Vinod Bhaskar.

Hi vinod
     when you are creating tmg , you will specific a function group name and sap generate a func group which contains that tmg . you can view in se80 , specifying function group name. In that , screen contains single screen 100 or two screen 100,200 .
     screen you can create module in pbo .u can find all field name in that screen.
    loop at screen.
   if screen-name = ''.
   screen-visible = 0.
   endif.
   modify screen.
   endloop.
regards,
vijay.

How to create event in table maintenance generator

Hi guys,
I need to create an event for my table maintenace generator such that when the field land1 is filled, the landx field should take its data from t005t table. and the ladnx field should be display only, it can not be modified in table maintenance.
How can i create an event in table maint. gen? How am i going to do it?
thanks always,
mark

Hi,
As mentioned in the last post go to the event screen by
Environment --> Modifications --> Events.
There you click on new entries and try writing your logic for event 21 i.e. after selecting 21 give some name of your event and write down the logic how you want to do this.
If event number 21 does not work then try 1. One of these two should work.
Hope this helps!!!
Regards,
Lalit

Changing the table maintenance generator

hi expert if table maintenance generator is created for a table and after the creation table is changed then how to change the old table maintenance generator?
Thanks
Avadhesh
Moderator message: standard functionality, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 1, 2010 1:37 PM

Hi Abbu_sap
I am agree with Rock's answere.
go to utilities->table maintenance generator and delete it.
After it recreate it in a similar manner as you created earlier and save it.
it will work fine.
As I also do this every time I change the table and it works fine for me.
Thanks
Lalit Gupta
Moderator message: please do not just repeat what somebody before you already said, there is no added value.
Edited by: Thomas Zloch on Oct 1, 2010 1:37 PM

How to change GUI title in Table maintenance generator?

How to change GUI title in Table maintenance generator?
Thanks
Pankaj

Hi,
In table maintenance goto
Environment>Modification>Maintenance screen
Click on layout button
Make editable form
change the text property of column.
save and activate it.
check in sm30 headings.
Pankaj

How to create table maintenance generator?

Dear Sir/Madam,
when i am creating table maintenance generator , it asks for function group
i give 0MB8 , it says u r going to change function group which does not belongs to u,
then i created a function group yfg9 and given , it then says yfg9 cannot be processed.
please telll me how to create the table maintenance generator for maintenance view yv_mmim_rep_cust.
Thanks in advance,
Dastagiri

Hi ,
Table Maintenance generator is used to maintain data in table , instead of giving access to se11 , we create a tcode for this table maintenance generator and we will give this tcode to end-user to maintain data
To generate table Maintenance generator :
click on UTILITIES in menu bar
-> table maintenance generator
-> enter Authorization Group as : &NC&
-> Enter Function Group : name of your table ( so it will create a function group , to check this function group go to tcode se80 : then select function and enter your Table name )
-> Then click on find screen numbers in Application tool bar.
-> Then click on create button in Application tool bar
if it is created successfully , then you will get a status message like table maintained generator is created successfully.

How to disable some of the table fields in Table Maintenance Generator

HI,
I am creating one table which contains 10 fields.
But i wanted to disable some 2 fields in Table maintenance generator.
So can any one plz tell me how to disable those 2 fields.

Generate a maintenance view for the table,
Goto- Table/Join Conditin Tab-- Put the name of your table
Goto-viewfield tab--- Put the fields whatever you required.
Then generate table maintenance for the view created.
pls chk
Thanks
Anurag

How to disable a field in the table maintenance generator of a table

dear experts,
i have created a table with 2 fields A ,B . i had created table maintenance generator for the table. i am entering the values for the table through table maintenance generator . for filed A i had given dropdown list which contains only 2
entries YES & NO. my requirement is if i select YES in field A , field B should be in enable mode(it must take some input), if i select NO in field A, field B should be in disable mode ( it should not take any input).
kindly help me....
thanks & regards
krishna

Hi Krishna,
A further to the above, you can go to SE11 and in the table maintenance generator click on
Fn.Gr.Text button, then go to Main program.
Here you will see "User-defined Include-files (if necessary). "
Just uncomment the PAI include and put your code..to make the field editable or un-editable.
To do that you might have to go to the screen painter and change that screen, to include those fields in a group or something, so that you can control them better.
Regards,
Sameer

Table maintenance Generator used as exit ?? how to find that??

Dear Abapers,
While creating billing and saving a billing document, a number range is automatically generated.
I have found that this number range is coming from a table and they have written some coding in Table maintenance generator.
How can i find that where it is implemented in VF01.
PLease resolve it.
Thanks and Regards,
Arati

Hi,
go to the table maintenance generator of your table.
Go to the path Environment -> Modification -> Events
They might have written some events to auto generate the number

Table maintenance generator. Why cut a column ?

Hallo,
I created a ztable and than a table maintenance . All it was ok. After I changed the ztable, I add a column,
than I delete the table maintenence and I rebuild it.
The new table maintenance generated not contein the column... why ? What I have to check ?
Tks.
regards.

Hi ,
Go to Tcode SE14 Database Utility and select the activate and adjust data and do the TMG.
Regards,
Bharani

How to forbid some deletes in table maintenance generator

Hey gurus,
I'm using table maintenance generator on my table and I would like to achieve that I could check whether to allow or not allow the delete action.
In other words I would like to forbid to delete those entries, which are referenced in some other tables, but I have no idea how to do it. I don't know where in the code is the Delete button is handled, or what to write in the right event to achieve my goal.
Can you tell me how. In details would be the best Thank you very much.
Best regards,
Robert

Did you add some foreign key relation between the maintained table and the dependant one, not a bad idea to add some...
You can also use Event 03: Before Deleting the Display Data create a form in your dialog. (Look for samples with search tool, e.g. Thomas's answer at thread event 03 in table maintenance generator)
Regards,
Raymond

EVENT problem in Table maintenance generator

Hello all
             I m working on 4.6C sytem. I m facing 2 problems in events in table maintenance generator
(1) I am using 04 event (After deleting records from table)   I have written BREAK-POINT in the Form .....ENDFORM... But the control doesnt stop there , when i select an existing record and press delete record button? not able to understand this
(2) When i implement even t 03( Before deleting records from table) , and select an existing record and press delete record button . Control successfully Go to corresponding FORM ...   BREAK-POINT ENDFORM .
But now the problem is.. in debuggin i can see the contents in TOTAL table but when i try to code LOOP at TOTAL ..ENDLOOP...it gives me syntax error saying " table TOTAL doesnot exists or not defined..but similar field TOTAL_S , TOTAL_M , TOTAL_L exists.. ???
how come i can see the same during debugging but cannot code it ?
Plese help
Nilesh

Hi Nilesh,
(1) I think the control will stop there after you delete AND save. Not sure about that but give it a try.
(2) I believe you are trying to access fields inside table TOTAL, is that right?
Actually you have to declare a work area with your Z table type.
DATA: w_workarea type ztable.
LOOP at total.
w_workarea = total.
endoop.
Then you can work with w_workarea.
Best regards.

Table maintenance Generator + Tcode for SM30

Hi,
I have created a table maintenance generator for a Z table. Then I created a transaction from SE93 for SM30 and passing table name as parameter.
My requirement is that the user should only be able to delete records from the Z table. It should not allow to insert or modify records.
When I execute the transaction created above it is allowing to insert, modify and delete records from Z table.
How to solve this issue? Please help.
Thanks in advance....
Regards,
Sriram

Hi Sriram,
I don't know why your language has changed to German. When I change status ZULG, the language remains English.
To see what happens I have created new maintenance screens and I went into the Modification --> User Interface.
On the next screen I pressed Copy User Interface and after that I got a warning about diferent languages. I just pressed enter. Now the popup screen gives me the possibility to change the interface. I went straight into change mode, without switching to individual interface. I changed status ZULG (everything is in German), activated the status and returned to SE55.
When I start SM30 , all texts are in German.
Because this is not what you and I want, I started again, I deleted my table maintance and created it again. Went into the modification of user interface again and again copied the user interface. Now I went into change mode and I looked at my user interface (in display mode) and all texts are in German. Went back to the strat screen of the menu painter, ACTIVATED THE USER INTERFACE and now, when I change the status ZULG, all texts are in English.
So, all you need to do is activate the user interface before you change it.
When you have a 2-screen table maintenance (an overview and a detail screen), you might want to change status ZUDG as well.
Kind regards, I hope you succeed this time around.
Tom.

How to see column in table maintenance generator?

Similar Messages

Maybe you are looking for