How to see comments while presenting?

I´m not able to make my comments visible on my secondary display while I´m in presenting mode. I have the 6.0.1 (1486) version of Keynote. This is a "showstopper"! Literally!! Does anybody have any solutions? I have discovered that the solution in previous versions of Keynote not are available in this version!

I´m not able to make my comments visible on my secondary display while I´m in presenting mode. 
Comments are designed to help create a presentation, (they are made to look like yellow disposable sticky notes), they are not designed for in show use as the comments contain notes unsuitable for the viewer, and therefore do not appear during playback.
This is a "showstopper"! Literally!!
This is about using the right tool at the right time, if you want to show additional text, use the custom text box and add text to that.

Similar Messages

  • How to see data while debugging

    hi all,
        I'm running one hr report , it takes 1hr to execute. I want to see , how many lines it is executed and how many records in the internal table filled, and ....
    Is there any t.code to view this data , .
    thanks in advance
    Naveen

    Naveen,
    It is VERY to the power of INFINITE important to know how to use the DEBUGGING concept.
    TABLE:- You can give the internal table name here and check the amount of data that got fetched once the select statement got executed.
    Fields:- You can see the what is the value that got stored in any of the fields that are used in the program.Suppose if you want to know what itab-makt has got then go to fields button and give the field name as itab-makt and press enter.This will show the data it is having when the execution point reaches this field.You can see at the maximum 8 fields in debugging.
    Break-point:- If you want to know whether a particular syntax is getting executed or not,if getting executed what is the result,then you can select that particular synatx in the program and press the STOP button.This is what they call "put a break-point at that line".
    Watch-Point:-Suppose you want to see what the field itab-makt is having then you can create a watch point on this field and run the program.Once the wathcpoint is reached the system will give you a message in the status bar saying that the watchpoint has reached.Thus you can run your program upto a point and see the value that got stored at that point of time.
    Overview:- It let's us know the processing blocks in the program that is currently running
    Call Stack-I don't know.
    Settings:-I don't know.
    The buttons
    F5-Single step
    This way you can run the debugging step by step,I mean each and every line of the program.
    F6, F7
    This way you can jump the performs and loops while debugging.
    F8
    Execution
    if you have any doubt revert it.
    K.Kiran.

  • Elements Version 8: how to see movie while rendering?

    Hey everyone,
    Newbie to PSE 8. How do I see a preview while Elements is rendering video? I'm used to other programs like Roxio Video Wave and Cyberlink Powerdirector showing the movie as it's being rendered.
    Is there a way to turn this on in Elements? If so, how? I didn't see anything in the online help.
    Thanks!

    Hello, firemystdl. Since your question is about video, you'll probably get better answers in the Premiere Elements forum, which is here:
    http://forums.adobe.com/community/premiere/premiere_elements
    Good luck!

  • I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I've gotten a little further on this. The dynamic select is
    working fine. It's the "a href" code that isn't. I'm wondering if
    someone can look at this line and tell me if it's okay to build the
    query string this way. The storeid comes through fine but I'm still
    not getting the employeeid value to pass. Here's line that's not
    working:
    td><a href="registerStoreCust.php?storeid=<?php echo
    $row_storeRS['storeid']; echo "&employeeid="; echo
    $_GET['employeeLM']; ?>">Register
    Customer</a></td>

  • How to see the object while moving on the artboard?

    hello everyone;
    maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.

    What have they gone and messed up now?
    When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
    If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
    If what Bedri says is right, they’ve gone and mended something that wasn’t busted.

  • HOW CAN I SEE SUBTITLES WHILE WATCHING A MOVIE?

    HOW CAN I SEE SUBTITLES WHILE WATCHING A MOVIE?

    If you are using DVD Player, go to Features menu, and click on subtitles.

  • In Layoout how to see all the lead columns presented in that.

    Hi Friends,
    Could you please suggest me how to see all the lead columns presented in the Layout.
    Appreciate your help through points.
    Regards,
    PJ

    Hi Ravi,
    When I opend the layout in change mode we are able to see the Layout, when click on continue we can see Header area,lead coulmns,data columns. In Lead columns I am able to see only 20 rows only. But I want to see all rows in that lead columns. When click on continue we are able to see the layout in ALV grid format. In that we can see lot of rows. Now my question is How to see all the rows present in Lead columns. Still if you have any details please give me ur id I will send some screen shots or give ur no. I will talk to you.
    Thanks & Regards,
    PJ

  • HT1498 How to see a movie in Apple TV while dowloading?

    How to see a movie in Apple TV while dowloading?

    Welcome to the Apple Community.
    Movies downloading to the Apple TV will start when enough of the file has been downloaded to ensure the movie can play in its entirety without stopping.

  • While presenting with keynote I clicked the presentation manager on my Mac book air and the presentation on the wall flipped to my scree and the presentation manager is displayed by the projector. How the **** do I flip them back?

    While presenting in keynote I inadvertently flipped the presentation display on my screen with the playing presentation on the wall through the projector. Can't figure out how to flip it back. Help

    Press the "X" key.

  • How do I run a presentation while the macbook is closed?

    How do I run a presentation on a projector with the macbook closed?

    Your profile sys iPhone, but you can run in clamshell mode.
    http://support.apple.com/kb/HT3131
    https://discussions.apple.com/thread/2664995
    http://support.apple.com/kb/HT1573
    Hope this helps

  • How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

    I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
    1. InitialProposal Stage
    2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
    3. Rejection Stage
    4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
    5. Execution Stage
    6. Completed Stage
    Requirement is workflow should move to Approval stage2 from Approval stage1  if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
    Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
    I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
    On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
    but I'm not able to retrieve comments from officeTask activity.
    My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

    Hi Paul,
    Thanks for your suggestion.
    By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
    the task).
    I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
    public string officeComments;
            public string officeDescription;
            private void TaskCOmplete(object sender, EventArgs e)
                CodeActivity Sender = (CodeActivity)sender;
                Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
                officeComments = ofctask1.Comments;
                officeDescription = ofctask1.Description;          
    Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
    Thank you

  • How to see all the list of tables in APEX

    Hi
    COuld anyone of you help me find out how to see all the tables present in APEX ?
    I can see all the list of tables when i give the command : select * from tab
    But apart from finding like this , is there any way to find out all the list of tables ?
    Regards,
    Tasha

    Hi Tasha,
    For Apex 3.2 ;
    select * from dba_tables where owner in
    (select workspace from APEX_030200.APEX_WORKSPACES)
    tab is a synonym for user_tables
    http://www.oreillynet.com/pub/a/network/2002/10/28/data_dictionary.html
    hope this helps you
    regards
    mozkavra

  • HOw to see currency pairs in Exchange rate type

    Hi,
    Can anyone tell me how to see currency pairs in an exchange rate type?
    Thanks

    Hi,
    I am not sure this is a right solution.  But I have some inputs on your requirements:
    1. For traveller cheques you may create a new payment method and do the required configuration for automatic payment program.  Don't generate any payment medium while running APP.
    2. For currency notes (cash payment) I am not sure how it works.  But probably it is possible by creating an account (account ID) for a particular house bank and use that (house bank & account id) for making payment. 
    Per my knowledge we have never used payment method cash (currency notes) in APP.  But logically it would work by create a new payment method and doing the required config for APP.
    Please update if you found a better way to do this.
    thanks & regards,
    Kumar

  • How to see the result

    hi every body...
    i want to get the result of any table..
    for ex: select * from dept;
    the o/p should be like(10~Accounts~new york)
    for this i wrote this code.... it run sucessfully;
    my prob is how to see the Result..
    declare
    tn varchar2(35);
    sqlstmt varchar2(2000);
    rc sys_refcursor;
    begin
    tn := '&tn';
    sqlstmt := 'select * from '||tn;
    open rc for sqlstmt;
    end;
    post u r comments,Hints and suggestion...

    post u r comments,Hints and suggestion...
    SQL> var rc refcursor
    SQL> begin
      2     open :rc for  'select * from &tn';
      3  end;
      4  /
    Enter value for tn: emp
    old   2:    open :rc for  'select * from &tn';
    new   2:    open :rc for  'select * from emp';
    PL/SQL procedure successfully completed.
    SQL> print rc
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
          7369 SPENCER    CLERK           7902 17-DEC-80        800                    20
          7499 VERREYNNE  SALESMAN        7698 20-FEB-81       1600        300         30
          7521 VAN WIJK   SALESMAN        7698 22-FEB-81       1250        500         30
          7566 MAINGUY    MANAGER         7839 02-APR-81       2975                    20
          7654 KISHORE    SALESMAN        7698 28-SEP-81       1250       1400         30
          7698 BARRY      MANAGER         7839 01-MAY-81       2850                    30
          7782 BOEHMER    MANAGER         7839 09-JUN-81       2695                    10
          7788 PADFIELD   ANALYST         7566 09-DEC-82       3000                    20
          7839 SCHNEIDER  PRESIDENT            17-NOV-81       5500                    10
          7844 GASPAROTTO SALESMAN        7698 08-SEP-81       1500          0         30
          7876 CAVE       CLERK           7788 12-JAN-83       1100                    20
          7900 CLARKE     CLERK           7698 03-DEC-81        950                    30
          7902 JAFFAR     ANALYST         7566 03-DEC-81       3000                    20
          7934 ROBERTSON  CLERK           7782 23-JAN-82       1430                    10
           109 JOMAR                                                                   30
          8800 VISWARAYAR INTERN          7934 03-OCT-82          0                    10
    16 rows selected.
    SQL> Cheers, APC
    Blog : http://radiofreetooting.blogspot.com/

  • How to see all the tables in ABAP

    how to see all the tables in ABAP
    i need to see all the tables present in tcode se16.

    Hi Thiru ,
    its tough to give all.so pls see the below links u can get all.
    http://www.erpgenie.com/abap/tables.htm
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=listofalltablesin+abap&cat=sdn_all
    http://www.guidancetech.com/people/holland/sap/abap/
    http://www.sap-img.com/ab017.htm
    http://abap-gallery.blogspot.com/
    thanks
    karthik

Maybe you are looking for

  • LR 4 suddenly no longer recognizes files.

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse

  • I can't find documentation for this app

    Hello, Where is the documentation for GarageBand for iOS? I installed it on my iPod, but the interface is confusing, so I need to find the right manual. All the manuals for GB on the Apple manuals page seem to be for desktops and laptops, etc. I know

  • Missing 'check special tags vi' version 7

    I have a a program written in labview 7 which out of the blue has stopped working. An error code now comes up saying it cant find 'check special tags.vi'. and so the program will now not run. I can't find any version of this sub vi for this version.

  • Where can I download iBooks for Mac? I did not find it in APP store. Thanks

    Where can I download iBooks for Mac? I did not find it in APP store. Thanks

  • Windows 7 Internet Explorer doesn't open (no error shown)

    With the latest set of updates, around 4-5 days ago, a new problem developed which I haven't seen discussed anywhere.  Internet explorer doesn't load up when I click on it's icon.  The hard disk clunks but no explorer window appears.  No error is dis