How to See Contents Of TC?
I set up a TC in 2008 to back up a MBP but also to act as a network drive for my iTunes content. I remember copying over my iTunes content via a wired Ethernet cable into the TC. I also remember Time Machine up and running and making back ups of my MBP. For various reasons I then disconnected it for 2+ years and am trying to set it up again.
I successfully have the TC up and running and I can see it as a Shared Drive but I cannot see my iTunes content. In fact when I click on the TC it shows nothing. Also, although I haven't run a back up yet with Time Machine I don't see any of my previous Time Machine back-ups when I launch Time Machine. TC shows that only 300GB is available for use so there is 700GB on data on the drive.
Is there any way to at least view the iTunes content on the TC since it was copied over as a network drive rather than part of TM?
I happen to have an older spare Time Capsule here at the moment with some older Time Machine backups on the disk. I transferred a few folders to the drive as well using the Finder.
If I change the name of the Time Capsule and device password, I cannot access the backups using Time Machine unless I right-click on the Time Machine icon on the dock and select Browse Other Time Machine Disks to select the "old"' name of the Time Capsule. Then I can view backups if I enter the "old" Time Capsule password.
Likewise, if I try to access the drive using the Finder, I'm asked for the password to access the disk. I have to use the "old" password for the files to appear. If I try to use the "new" password, the disk appears empty.
So, I'm tempted to say that if you have data on the drive, you will need to use your "old" original device password to access the disk contents. At least, that is the way it works for me.
I cannot explain why you do not see your older Time Machine backups when you right-click the Time Machine icon and select Browse Other Time Machine Disks unless the files have possibly become corrupted and not readable.
Message was edited by: Bob Timmons
Similar Messages
-
Hello,
I am new to use the JDeveloper to create JSF Applications and I learn with the tutorials.
So I have a question:
I want to find out: How to see the content of the second or third showOneTab component in the WYSIWYG Design View of a page.jspx?
For example, I am orientating the tutorial: "Introduction to ADF Faces/Trinidad Using JDeveloper" (http://www.oracle.com/technology/obe/obe1013jdev/10131/trinidad/adf_faces_trinidad.htm)
Page: table.jspx
There is the showOneTab "Single Row Select" and "Multi Row Select" and I see only the content of "Single Row Select".
How can I see the content the table2 of "Multi Row Select".
I have created the table of "Single Row Select" and can see only this one.
The download of that example show me in the View of structur the component table2, but not in DesignView.
Can you help me?
best regards
JoachimHello Frank,
many thanks for your answer. It try it and it works!
For completion, I think the argument "disclosed" of the component "af:ShowDetailItem" with "default" setting is "false".
So if I will editing one tab in WYSIWYG editor, I set only this tab disclosed = true.
All others to "false". When my edit is completed, I set only the first tab to "true" and all other "false", because I want to start with the first tab by first request.
I look again into the "help". Hopefull in answer:
Which effect has this argument by deployment?
There is only the desciption: "whether or not to disclose the children This attribute is not supported on the following agent types: pda, phone, voice."
I think this is for me irrelevant. My application have to support only a client like a personal computer.
Which effect has this argument by deployment?
Or is this only for the WYSIWYG editor?
Joachim -
How to see contents imported GPO ?
At this time ZCM-server: SLES10_x64 with ZCM10.3.1
and Standalone server WIN2003server with AD
(This server only for creation GPO. To it nobody logs in )
In it the server has been created GPO.
From the console of this server WIn2003 has launched IE7 and has LOGIN into the ZCM-server.
In the ZCM-server the policy tssrp_06 in which has been created has been added earlier created GPO from AD.
tssrp_06 | Details |
( * ) Enable the enforcement of this policy
( * ) Active Directory Group Policy
It was a floor of year back and I did not.
Now it is necessary to look - what GPO in tssrp_06 ?
How i can do this ?
Sergamaltsev1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
How to see content in my icloud
How can I delete photos from my camera roll without deleting them from my iCloud?
You cannot. Your photo stream is streamed from your camera roll.
-
im stuck, my iphone broke all pics are suposed to be in my icloud account but dont know how to view them??? HELP
You cannot. Your photo stream is streamed from your camera roll.
-
How to see the content of an attachment in sxmb_moni
Hi all,
Does someone know how to see the actual content of an attachment in sxmb_moni?
If I look under Inbound Message (CENTRAL)/Payloads, I would see one node for MainDocument and another node with the name of the attachment.
When I click on the attachment name, a word document shows with one line in it. That line is just the name of the attachment and nothing else.
How can I see the actual content of that attachment?
Thank you. Points will be awarded to helpful answers.
Regards,
-MichelleI checked my coding again in debug mode. I cannot find anything wrong.
I duplicate here my coding again.
DATA lo_attachment TYPE REF TO if_ai_attachment.
lo_attachment = lo_attachment_protocol->get_attachment_from_binary(
data = iv_attachment_content
type = iv_attachment_mime_type
name = iv_attachment_name
* set the attachment
DATA lt_attachments TYPE prx_attach.
APPEND lo_attachment TO lt_attachments.
lo_attachment_protocol->set_attachments( lt_attachments ).
The local variable LT_ATTACHMENTS has field payload-resource with the following expected values --
KIND : B
TYPE : application/msword
BINDATA : 00530068006F00740073005F0073007700630076002E0064006F00630020002000
The BINDATA correctly contains the dummy data I assigned.
I must have missed something. Can someone help?
Best regards,
-Michelle -
How can I view the content of the message without having to double click on it; I used to be able to see content of the message next to it .
Is this in Mail?
You can (I do all the time). The oreview window can be resized by dragging the message list window border - you might accidentally have closed it up -
How to see Manifest content ?
Hello !
I want to know how to see the content of the manifest file using the jar.exe command ?
Is this possible ?
Thanks
Best regards
LudovicYes:
jar xf yourfile.jar META-INF/MANIFEST.MF -
After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
== This happened ==
Every time Firefox opened
== After upgrading to 3.6Step by step, how did you arrive at seeing this agreement?
-
How to find content of a constraint etc.
Hi,
select constraint_name
from user_constraints
where table_name = 'EMP';
shows to two constraints for the given table of EMP. Now, how to find CONTENT of each of these two constraints?
Secondly, how to find if a particular column is nullable (programmatically, not from DBA tool set)? e.g. EMP.deptno
Thirdly, why did I get the err msg of "inserted value too large for column"
when executing the following command for data insertion to EMP as user, scott
create SEQUENCE emp_sequence
start with 8000 increment by 10;
insert into EMP values (emp_sequence.NEXTVAL,'JOE','Researcher',null,null,null,null,null);
Thanks a bunch.Thirdly, why did I get the err msg of "inserted value too large for column"Er, do the math...
SQL> conn scott/tiger
Connected.
SQL> desc emp
Name Null? Type
EMPNO NOT NULL NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NUMBER(2)
SQL> select length('researcher') from dual
2 /
LENGTH('RESEARCHER')
10
SQL>
Secondly, how to find if a particular column is nullable (programmatically, not from DBA tool set)Don't like the sound of this, smells of dynamic coding. Anybody who can't figure out why they can't create an EMP record for a researcher probably ought not to be tangling with dynamic SQL just yet.
Now, how to find CONTENT of each of these two constraints?The CONSTRAINT_TYPE tells you the sort of constraint: P=PRIMARY KEY, U=UNIQUE, R=FOREIGN KEY and C=CHECK. Only Check constraints have any content as such and you'll find that in the SEARCH_CONDITION. Note that this is a LONG column, so you may need need to SET LONG 5000 to see it in SQL*Plus.
Cheers, APC
P.S. In future please refrain from bundling unrelated questions into a single post. There is no charge for posting and it avoids the threads getting long and hard to follow. -
How to see data in a transaction ODS
Hi all,
I am populating data into my Transactional ODS through the function module RSDRI_ODSO_INSERT_RFC . But not able to see the data in it. as there is no manage option to the ODS. and by default an export datasource is created for the ODS. do i have to create one more standard ods and use this export datasource as update rules and see the data?
Please let me know how to see the data. and also and detail document on Transaction ODS?.Hello Satish,
Data loaded through Planning Application eg. In Transactional ODS will not have manage option or request. You can view the data using following methods.
Since transactional ODS objects cannot be filled with BW data using staging (data is not supplied from the DataSources), they are not displayed in the Scheduler or in the Monitor. Transactional ODS objects can therefore not be updated in the same way as standard ODS objects.
If you switch a standard ODS object that already has update rules available to a transactional one, the update rules are set as inactive and are no longer processable.
As no change log is generated, no delta update of data stored at the end of the process is possible.
You cannot set the indicator for BEx Reporting when creating a transactional ODS object.
1.) In order to report this, you can create an InfoSet and then execute a BEx query for it.
2) You can also download the data from your transactional ODS object using the download function. You can find this function in the administration of the ODS objects, Tab Page Contents -> Active Data. Choose Execute to display the data. Using the main menu Edit -> Download, you can download the data in different formats.
Hope it helps.
San. -
How to see the MM invoice changes in sap?
Hi
How to see the MM invoice changes in sap ?Dear Prashant,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
So you can always track it :
Go to ->SE16 ->Enter table name CDHDR -.>Table contents (F7)
In the selection screen enter
OBJECTCLAS as INCOMINGINVOICE
OBJECTID as =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
TCODE as MRBR
->Execute
You will find the details when it was released Date ,Time, User ID etc
Edited by: redriver on Dec 26, 2011 2:23 PM -
HT4437 how to see air play logo on my 4 s phone
How to play contents on my iphone 4 S on my TV through Apple tv
Make sure you're connected to the same network as the Apple TV. The AirPlay icon should be in the control center.
If you're not seeing the icon, please refer to this: http://appletv2.com/airplay-icon-missing-ios-7/ -
How to See FM (RFFMS007)? What exactly is it?
How to see FM (RFFMS007) in the system?
What exactly is it?
How do we use the tables in SAP?
How to look for tables in FI and FM? What are the uses? How do we see the contents of the tables?Hello,
Please check all Utility programs in Public Sector Management (PSM-FM)
1. General utility programs
RFFMMONI (Monitor using PSM settings). This report displays the most important Customizing settings for the update of Funds Management (FM area, OFUP, settings for the update profile). The report also displays customer-specific update profiles that differ from the standard profile that is delivered by SAP.
RFFMS007 (Activate/Deactivate Document Analysis in Funds Management).
RFFMS008 (document analysis).
RFFMS009 (analysis of FM account assignments in posted documents)
2. Special utility programs
a) Former budgeting
BPINDAN2_NEW (AVC: Determining the Index for Assignable Element)
RFFMBUM1 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the overall values and the annual values correspond with the total of the relevant
documents.
RFFMBUM2 (Sum of Period Values <> Annual Values). This program determines inconsistencies between annual values and period values.
RFFMBUM3 (Budgeting Data without Corresponding Master Data). This program determines inconsistencies on the database.
RFFMBUM5 (Budget/Release Consistency Check). This program checks in the database whether the release amount exceeds the budget amount.
RFFMBUM6 (Inconsistencies between Budget Structure and Master Data). You can use this program to determine inconsistencies between the budget structure tables and the master data tables.
RFFMBUM7 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the total of the line items corresponds with the overall budget of the relevant record for the overall values or the annual values of a specific budget type or budget subtype.
RFFMBUM8 (Display Inconsistency: Total Overall Vals/Annual Vals / Doc.Numbers). This program checks whether the overall budget record for overall values or annual values corresponds with the
total of the relevant line items of a specific budget type or budget subtype.
b) Fiscal year change
RFFMCFM1 (Closing operations monitor). You can use this report to display an overview of the settings that are relevant for the closing operations.
RFFMCCF_DISPLAY You can use this report to display documents concerning the fiscal year change.
c) Account derivation
You can use transaction FMDERIVE to activate the trace. You can reproduce the account derivation during posting as a result.
d) Payment selection (RFFMS200)
RFFMS200_TRACE (Trace for Payment Selection Analysis). You can use this check program to analyze a complete clearing lot without debugging the payment selection program or without having to search for the relevant information in the system.
FAGL_SHOW_SPLIT Simulation of the document splitting using expert mode -> this is relevant for online payment update.
e) Federal Government
RFMFGRCN_RP1 Reconciliation Analysis Report
3. Matching programs
RFFMRC04 (for matching line items and the totals record). This report analyzes differences between line items and totals records in Funds Management. If derivations were corrected in the update run, you must set up the availability control (transaction FMBV) again because this control is based on the totals records.
RFFMRC01 (for matching actual data). This report checks at line item level whether the selected FI documents are updated in Funds Management.
RFFMRC07 (for payment matching). You can use this report to match the account movements on the bank accounts and the bank clearing accounts of financial accounting with the data in Funds Management and vice versa.
RFFMRC21 (for the reconciliation of earmarked funds). You can use this report to reconcile documents such as funds reservations, funds precommitments, funds commitments, funds blocking and forecasts of revenue. If the program determines inconsistencies, you can use transaction FMN5N (program RFFMRP03N) to correct the relevant FM commitments.
RFFMRP07 (for rebuilding sales orders in FM). This program posts selected sales orders and rebuilds the relevant data of the open items in Funds Management.
To understand FM itself (which means all the component/module/area) please check the following menu in help.sap.com
SAP ERP Central Component -> Financials -> Public Sector Management ->
Funds Management
There you will find a lot of information related this component that is integrated with FI, CO, MM, SD, PM and so on.
Best Regards,
Vanessa. -
How to replace content in text data type?
How to replace content in text data type?
when we sending the mails we are taking content from the database.
The data is maintained in text data type column. Now i have to replace some of content in mail content
(text data type column) from database.
I tried by using REPLACE function but data is truncatedThe data is maintained in text data type column.
Hello,
See REPLACE (Transact-SQL) => "If
string_expression is not of type varchar(max) or
nvarchar(max), REPLACE
truncates the return value at 8,000 Bytes"
You may should consider to Change the data type from "Text" (deprecated) to NVarChar(max).
Otherwise you have to use
UPDATETEXT (Transact-SQL) for the text data type.
Olaf Helper
[ Blog] [ Xing] [ MVP]
Maybe you are looking for
-
Hi, I am trying to get a filter expression to work. I am trying to create a filter that will choose the current year. This will be part of a filter condition that will be a YTD filter. I am trying to get the year part working first. Here is what
-
Output Video File to 'Microsoft DV Camera And VCR' DV driver
I've just submitted this: I would like to request that the facility be made available to output the one video file allowed on the session timeline to the 'Microsoft DV Camera And VCR' DV driver for display on a TV monitor via appropriate hardware. Pl
-
After I updated my iPhone 3GS to iOS 5, all my music are gone from phone,
So do I have to manually select them all in iTunes to add them to my iPhone?
-
When I open iTunes it takes like 2 min to let me play music
I have an external drive with 200GB of music (aiff files mostly), when I open iTunes the cursor becomes in to the multi color spinning disc, it remains like that for 2 min, at the same time external hard drive starts running, in the meantime there is
-
Encore CS6 Flash Export problem
Hey There! I am having a problem with my encore CS6 flash exports. The DVD menus are shown the right way in the browser but, when I select a video to be played, the flash player shows me the video controls but no video. The background stays grey. I'v