HOW TO SEE DOCUMENTATION OF BAPIS IN REAL TIME

I WANT TO SEE DOCUMENTATION OF BAPI'S IN REAL TIME CAN U TELL ME HOW IS IT POSSIBLE

Similar Messages

Documentation of SAP HR- Real time scenario

Hi,
Please can anyone give me some documentation on how the functioning happens in SAP HR real time scenario.
The real time implementation for Organizational management, Payroll, time Management and personal administration.
It would be great if the document be sent to .
Thank you !

This is a Crystal Reports forum. Please close the existing thread an post your question here:
SAP ERP Human Capital Management (SAP ERP HCM)
I would recommend to explain in more detail the business need behind your quesiton in the new posting.
Regards,
Stratos

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?

What you say about Send Later timestamp is correct.
When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
Please voice your vote at this link:
https://bugzilla.mozilla.org/show_bug.cgi?id=560901
You will need to logon/register.

How to plot bar graph in the real time?

Hi guys
I have n row and 3 column array, n will vary according the time, for example t=10ms, n=1;t=20ms, n=2;..., I would like to display all the data of the array in the bar graph in real time. I tryied with example "array to bar graph demo.vi" but very time, only one row was displayed.
Could anybody help me?
Many thanks.
Sorry I don't know how to capture the picture from VI, so I pasted it diagram to word document.
Attachments:
question.doc ‏240 KB

Where did you get this example. I can't find it listed in the current shipping examples.
Also, posting a small image of a section of a block diagram is not much to work with. You are using local variables and a sequence structure. Neither one is a good sign. If you would simply post the actual VI (and any subVIs), it would be much easier to see what you mean.

How to read updated data from a real-time generated file?

I have a question:
I want to read the 10 mostly updated data from a real time generated data file. The data in this file is accumulated. how can i read mostly recently data to an applet? and further to using this data to draw a real-time graph? pls help
kelvin t.l. tse

Hi,
I think there is no "typical" way. You will have to define a convention on how the new data are stored into the file, so as to know how to accessthem. If new data are simply put at theend of your file, you may use a RandomAccessFile to read only those lines that interest you (the 1 final lines).Otherwise, you should at least know how the data file is written.
You can know if thedata file has been modified with the File.lastModified() method. This retrurns a long value corresponding to the date and hour the file was last modified. Store that value ito you appl. and perdiodically (use a Thread), compare that value with the value returned by lastModief(). If both value are NOt equal, then the file has been updated
it's all a question of knowing how the data are stored into the datafie generated.
Be also aware that you will probably have problem when your java appl. tries to read the file at the same time it is updated by the other application. I guess when theother application writes data into the file, you will not be able to read it. So, use try{} catch statements and first check to see if you can read the file with File. canRead(). If not, simply delay the reading process by asking a Thread.yield() or Thread.delay (1000)...
vincent

How do you interface a Renishaw laser real-time with NI DAQ?

I understand that it is possible to acquire "real time" feedback from a Rensishaw Laser while measuring linear position, with the following modifiers applied.
*The standard output is a digitized value to a proprietary (Renishaw) data acquisition (DAQ) card.
*Renishaw lasers have a quadrature output facility on the back of the laser head. This permits capture of the �raw� interferometry signal. This raw signal is not compensated for environmental factors such as temperature, air pressure, humidity, etc.
*The standard system integrates signals from an environmental unit for air temperature, pressure, and humidity, as well as signals from up to three material probes. Acquisition and pro
cessing of these or equivalent signals would have to be considered to provide data for environmental compensation calculations (Edlen equation). This is mandatory in order to obtain accurate distance and velocity readings.
*The quadrature output can communicate with other cards. (NI DAQ?)
Specifics with regard to Labview software and required DAQ to read real time Laser output would be very much appreciated.

You can use a counter available on the E-series MIO DAQ boards or the 660x counter boards. You can measure the position, frequency, and period of the output from a quadrature encoder. Examples on how to measure signals from a quadrature encoder for LabVIEW can be found on the web at ww.ni.com/support under the technical resource section search under the example programs section.
You may also want to contact Renishaw to see if they have drivers available for LabVIEW and their DAQ equipment.

How to see several windows at the same time?

I know this is too basic.
I have 1 window open.
The tab shows 3 separate items each of which I can click on and see.
But I don't want to see each window 1 at a time.
I want to see all 3 items at one time.
I know how to tile once I see all 3 windows.
But how do I get to see all 3 at the same time?

Peter Spier wrote:
Tabs display one doc at a time. Any viewing method the shows multiple docs uses un-tabbed windows. That button I showed you above is one easy way to change from the tabs to a convenient arrangement of windows.
So if you have multiple tabs, you can use the views button to arrange them so they are all visible at the same time.
The Arrange Windows widget in the tool bar is sometimes confusing.
Selecting any open window makes that the topmost active window; if it's near maximum size, you can't see the others, so this is also confusing.
How about Window > Arrange > Float All in Windows to separate multiple tabbed open files, followed by Window > Arrange > Tile (or Cascade)?
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

How to implement the Transfer Function in Real Time VIs?

Hi all,
I'm relatively new to Labview Real Time modoule and want to implement one Controller(not PID one) in Deterministic Loop! I have already designed discrete Transfer Function and searching for the way to build one Controller with it! Is it right to use the Simulation Loop instead of Timed Loop (in this case Deterministic loop) and implement the controller in it?! If it's correct so, should I use the same clock and Priod as Timed Loop?!
It would be very helpful, if there is an Example about using transfer function in Real Time Loops!
thanks for your help,
Mohsen

Hello mhmdi,
Sorry I can't open your VI (looks like it is a new version of LV than I have installed).
You're right - you don't need to convert to a difference equation if you have the CD&SIM Module which can take discrete time transfer functions directly. You don't need shift registers with this function, as it is effectively done internally. If you don't have CD&SIM discrete TF's can be implemented easily just in a timed (or while) loop with feedback nodes or shift registers to replicate each z-1 you need.
Some more ideas:
There are many configuration parameters and options with the Discrete TF VI - which you need to understand for your application and make sure are correct. Sometimes implementing in a basic form (timed loop and shift registers) allows you to see what is happening without any confusing options you might not need.
Are you using the Discrete TF VI in a Simulation Loop ? You might need to think if the loop being used is appropriate for a Real Time application. Maybe the timing of the TF, the loop and the DAQmx data are not all suitable for each other.
I'm not familar with DAQmx, so not sure about any specific real-time aspetcs of that.
"if the sample frequency of the discrete transfer function in the timed-loop is at multiple integers of the sampling rate (e.g. 12000 Hz for tranfer function and 4000 Hz for sampling rate, 12000=3*4000), would it somehow improve the resolution of the controller command?"
This could actually make things worse - but depends on your transfer function if it is a problem. Think about it this way - in the scenario you state the input signal going into the Discrete TF will only change once in every three samples, that means if your transfer function includes a 1-z^(-1) factor (i.e. a derivative) - that will be zero for two samples then jump up for the next sample. You'll observe a very jittery/noisy signal, but the noise is due to samples not being correct. This will also occur if the sample times are very similar but go in and out of sync where you may get the occassional sample that is the same and hence the occassional zero in the TF.
In an application I had we had problems trying to get the data coming into a timed loop and the timed loop itself synchronise, and before it was fixed the control signal was very jittery.
Consultant Control Engineer
www-isc-ltd.com

How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

How can I make the x axis real time?

I would like to know how to make the X axis of a chart/Graph into realtime so that I can go in increments of seconds or milliseconds. How can I do this? I am getting some really funny stuff on my graphs and I notice the manual says that the "Time" label is just a default label. So I would like to know how to get the "real" time on my axis. Do you have any good ecamples?
Thanks,
Brian

Zvezdana,
I don't have LV 7, (I have 6.1) so that executable didn't come in. Also with what you mentioned won't I just get the time and date in seconds? what I want to get is the data ploted for the amount of time that the VI is running or that my Kodak Imaging board has been programmed to cycle within. I am going to attach some of the stuff I have been getting, I don't know if it is REAL TIME ,which I want, or if it is not.
Attachments:
Question_for_engineers.doc ‏20 KB
Test_for_technicians.zip ‏347 KB
Front_Panel1d.jpg ‏83 KB

How much interfaces can be driven in "real-time" with a VI in LABVIEW 6i

In my application I need to merged data from different devices hanging to my computer via different interface types. Each data set in to be specifically formatted in a file. Each data set comes a a rate of ~ 10 Hz.
As acquisition devices I do have
- 4 digitizers connected to the PCI bus and their labview driver are already given by the constructor
- an instrument from which data to be imported via a GPIB interface
- an instrument from which data are imported via a serial port
- and probably in the future, 2 devices mounted on two USB port
I wish to developp a LABVIEW 6i code which permit me to make the request to all instrument, to import the data and to merged them as quick as possible so
that I can store data set coming every 0,1 s. All data from all instruments must be recorded for the same event at the same time (in a triggered manner) before it performs the acquistions for the next event
I would like to know what is the best way to each my goal.
- Is it possible to control all this with one VI (containing lot of VIs) ?
- Should I execute a VI for each interface and run them at the same time and save all data set with a time stamps in a file and then, off-line, process all the files and merge my information.
In a general manner, are there any rules which indicate the maximum number of interface (according to their nature) which can be properly controled on a given platform from one computer.
Thanks you very much for any answers

Its been a couple of days with no reply....
Look at the occurence functions.
You can have one loop send occurences at teh rate you need.
Put each of the other functions in seperate loops that wait for the occurence on each interation.
Provided each of your loops runs fast enough this approach should serve you up till you run into the indeterminism of Windows. If the the indeterminism will be an issue, you may have to go with LV Real-Time.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I find the minimum in real time

I 'am doing some type of sensing mechanism. I that the data is step count versus intensity. So I want to record the minimum in real time from. Please kindly help

Hi perumpadapu,
you should have learned by now to provide some meaningful example (data)…
There are functions to detect minima: ArrayMinMax, "smaller than" comparison, PtByPtArrayMinMax, MinMax comparison, ...
It all depends on your data!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to see all back ups on Airport Time Machine?

I have lots of backups on an external HD.
Looking for a folder/file is easy because I can see all backuped folders and files in the folder set up I have decided upon.
I would like to see all my folders and files as these have backed up on Airport Time Machine. I just want to see these folders and files like this is the case on my external HD.
They must be placed somewhere on Time Machine.
How can I see these?
I am not really interested in going into Time Machine Backups on a date related basis, but on a folder related basis.

I am not really interested in going into Time Machine Backups on a date related basis, but on a folder related basis.
Unfortunately, Time Machine is not really interested in working this way. Apple takes the word "Time" in Time Machine seriously.
The best that you will be able to do is navigate to find a folder that you want on your Mac
Then, open Time Machine and use the timeline to see different versions of that folder

How To Re-Compile ONE Component in Real-Time Without CF Restart?

Is there a way?
I've seen tricks for restarting the application, but I suspect this still kills all active sessions, and we have quite a few going on.
I just have one CFC I need to recompile to get some changes in place, but I don't want to upset the entire apple cart.
Is there a way?
RLS

I like this idea and will give it a shot next time for sure. It would be so nice to find a way to do that without having to restart CF in Production to make a hotfix.
I will review those settings to see what the impact might be. I wouldn't want to affect long-term efficiency for short-term occasional satisfaction.
BKBK, thank you very much for your help and suggestions!
RLS

Same Mac, connecting to two different networks, one by Ethernet, one by Wi-Fi. How to see both networks at the same time?

On this Mac, I have access to the company network (and Internet) via the Ethernet port (gateway 192.168.1.1).
At the same time, I have a second (backup) Internet link via Wi-Fi, to a different ISP (gateway 192.168.3.1)
At the least, I would like to view the company network from the Finder AND access Internet via the Wi-Fi link.
I have minimal knowledge of network stuff, but if I could redirect the browser requests to the Wi-Fi link, maybe it would work?
Thanks for your help!

Oh well... just found the reply...
Changing order of the connections, putting the Wi-Fi first as it gets the HTTP first.
Don't know why, but it would not work yesterday!

HOW TO SEE DOCUMENTATION OF BAPIS IN REAL TIME

Similar Messages

Maybe you are looking for