How to see estemated time in db12.......

Hi every one,
How can i see the estemated time and how much data get backup from the db12 transaction? the backup is in progress....
thanks
Reddy

Hi Bupathi,
I dont think you can see the estimated time in DB12.
It is used to see when the backup has been taken and what was the time taken for the last backup.I think you can assume the same time that would take for the next backup.
Also using DB12 you can find the drives which will be used
during a recovery.
Reward points if helpfull.
Regards,
Vamshi.

Similar Messages

How to see rolling time marker in imovie 10?

In iMovie 9, when i was in a clip, there was a rolling timestamp for whereever the play bar thingie is.
Now I dont see that anywhere in imovie 10.
This was a REALLY useful feature to me!!! How can I get it back?

If the time display is the only problem you have then I would persevere with iMovie 10.
[ If you ever switch to FCP in the future (far from free of course) you will get it back together with many new powerful capabilities. ]
Geoff.

HT3529 how do i see the time i sent a text message?

Does anyone know how I see the time next to my text messages?

Time stamps are underneath the messages, not next to them. There's no way to change that.
You'll see the time stamp for an initial message. After that, you'll only see a time stamp about every 15 minutes. However, when I archive my text messages using PhoneView, I can see a stamp next to each one.
PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php

How do I see the time of day a call was received on 4S?

Can anyone tell me how to see the time of day a phone call was received or sent on the IPhone 4S?

Phone>Recents...tap the "Blue" chevron.

How to find the time stamp for delata

Hi Analysts,
I am loading data from R/3 to InfoProvider(Cube or ODS) with delta update.
I have seen nodata was loaded to InfoProvider. But data was available at DataSource. then new delta is started. i want to load the last delta again.
How to see the time stamp of delta?
How to load that delta data?
Please help me in this need.
Hari.

Dear Srihari,
if your last delta failed then you can request it again by calling the same delta infopackage again, it will ask for repeat delta (in case last delta has failed), go and run it.
this way you can have your delta figurs back, and do upload via PSA.
Hope it helps.

In SQL Trace how to see which statement getting more time .

Hi Expart,
In SQL Trace (T-code ST05) . I am running the standard transaction . how to see which statement
running more time and less time . suppose one statement running more time so how resolve the
performance .
Plz. reply me
Regards
Razz

> The ones in 'RED' color are the statement which are taking a lot of time and you need to
> optimise the same.
No, that is incorrect, the red ones show only the ones which need several hundret milliseconds in one execution. This can even be correct for hard tasks. And there are lots of problem, which you will not see
I have said everything here:
SQL trace:
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
Go to 'Tracelist' -> Summarize by SQL statements', this is the view which you want to see!
I summarizes all executions of the same statement.
There are even the checks explained, the slow ones are the one which need a lot of time per record!
See MinTime/Rec > 10.000 microseconds.
Check all number of records, executions, buffer, identicals.
The SE30 Tipps and Tricks will not help much.
Siegfried

How do I get to see the time and how many times some one has been on a certain website on history?

I look in to show all history and I can see the history of websites but I want to see the time, date, and how many times been in the websites? How can I can get this information?

I look in to show all history and I can see the history of websites but I want to see the time, date, and how many times been in the websites? How can I can get this information?

For iPhone4 with iOS7, how can i see the time of day for a voice memo instead of the length of time for the recording?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

For iPhone 4S with iOS7 version 7.0.2, how can I see the time of day for a voice memo, as opposed to its length (of time)?

While running the query how much time it will taken, I want to see the time

Hi Folks
I would like to know ... While running the query how much time it will be taken, I want to see the time? in WEBI XI R2.....
Plz let me know the answer.......

Hi Ravi,
The time a report runs is estimated based on the last time it was run. So you need to run the report once before you can see how long it will take. Also it depends on several factors... the database server could cache some queries so running it a second time immediately after the first time could be quicker. And there is the chance of changing filters to bring back different sets of data.
You could also schedule a report and then check the scheduled instance's status properties and view how long a report actually ran.
Good luck

How to see an EHD attached to Time Capsule

I want to store all my music on an EHD and point my iTunes to it so I can save space on my computer. I've been told that this is easy to do.
So I hooked up my LaCie backup to my new Time Capsule. The question is, I don't know how to see the LaCie so I can drop anything in there.
Anyone know how to do what I want to do here?
Thanks.

Thanks. When I opened Finder and clicked on the TC I see two drives. The TC & the LaCie. So, I assume that the password is already in the keychain.
If I'm right, the LaCie already started the backup when I plugged it in and turned it on. Because when I go into the files and subfiles and subfiles I find that the music in those files are up to date.
If this is true and the LaCie is already backed up then what I want to do is point iTunes to that drive so I can dump off music from my Macbook and save space.
I want iTunes, iPods, etc, to run off that EHD which I would like to dedicate to music only.
Do you know how to do this?

How to see the Ringing Time of a Missed Call?

How to see the Ringing Time of a Missed Call?

I wanna see the missed call as a Genuine Call (Ringing for the full time) or a mere signal of a few second as a request for call back.

How to see how many times of index split occured on an index?

hi gurus
The ASH reports shows a lot of enq: index contention wait event on an index.I suspect that it's index split that caused the waits. From wht dictionary can I see the times of index split once occured on that index?
Thanks very much!

http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#i16341
The name of the enqueue is included as part of the wait event name, in the form enq: enqueue_type - related_details. In some cases, the same enqueue type can be held for different purposes, such as the following related TX types:
    *      enq: TX - allocate ITL entry
    *      enq: TX - contention
    *      enq: TX - index contention
    *      enq: TX - row lock contention
The V$EVENT_NAME view provides a complete list of all the enq: wait events.
You can check the following V$SESSION_WAIT parameter columns for additional information:
    *      P1 - Lock TYPE (or name) and MODE
    *      P2 - Resource identifier ID1 for the lock
    *      P3 - Resource identifier ID2 for the lockdoes following SQL return any rows for you?
SELECT Decode(request, 0, 'Holder: ',
                       'Waiter: ')
       || sid sess,
       id1,
       id2,
       lmode,
       request,
       TYPE
FROM   v$lock
WHERE ( id1, id2, TYPE ) IN (SELECT id1,
                                     id2,
                                     TYPE
                              FROM   v$lock
                              WHERE request > 0)
ORDER BY id1,           request;

How do I see the time stamp from footage

I was wondering if it is possible to see time stamps from footage taken by GoPro camera in FCPX. I can see the duration of the clips and the DATE it was created. I would like to see the actual time it was created. I have 2 cameras that were shooting at the same time and I would like an easier way of sifting through all of the clips to mary them up.
Is there a way to see the time stamp of when the video was taken?
Thanks

Got ya. I will suggest one more thing: You can add "markers" at points where you can visually (or aurally) see (or hear) a synch point. Once you add these markers, "synchronize clip" will begin to grind out the rest.
Again, if you look at the above tutorial, I think it explains this under "manual" synch.
I don't mean to push this upon you, but... FCPX is GREAT for multi-cam synch. It is the best--I think--in the industry.
Good luck. Sorry if I'm of little help beyond this.

How to see time taken of the footage in premier pro cs5

Hi,
I have captured the video footage from miniDV tape and brought it in premier pro cs5. I want to see the time at which the actual footage was recorded, not the file created or modified. For eg, 12th march, 2011 at 1.24PM. I tried to look under project panel and expanded it by pressing ~ key. On the right hand top fly out menu, pressed Metadata Display and searched under Premier pro project data and Basic. Couldn't find the right property to add. Any help appreciated.

Window | Metadata
-Jeff

How do i see the time code on my imported video

I am trying to see the time code on the video i imported as i do editing

You can see date and time the frame was shot by clicking VIEW/PLAYHEAD INFO and skimming over the clip.
If your camcorder shoots professional timecode, you would need Final Cut Pro to see that.

How to see estemated time in db12.......

Similar Messages

Maybe you are looking for