How to see multiple tables on the same screen using Mac Numbers?

I'm working with a spreadsheet on Numbers (iWork '08) on my Mac. I have three worksheets that each have one table in them. I'd like to be able to see two of the tables simultaneously. Similar to the "Tile" function that I used to use in Microsoft Word. Does anyone know if something like this exists? Googled for it until I was blue in the face and went back at least 500 threads here!!!

Jon,
This will seem so easy once you get it. In the Sheets Pane, drag tables from one sheet to another until you have all three in one sheet. Then go to that sheet and arrange the tables to your liking.
I should note that you will need to make sure that the Sheet icons are expanded: click on the triangle next to the Sheet icon until it points downward and reveals the sheet content.
Regards,
Jerry
Message was edited by: Jerrold Green1

Similar Messages

  • How to have multiple images on the same screen? like in the movies where you see several actions at

    how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
    i don't find  a tutorial in adobe tv....
    thanks !!

    The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
    If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

  • How to update two tables at the same time using jdbc

    Plz will anybody tell me what is the code or query in jdbc by which you insert entry in one table and simultaneously it goes in another table?
    Thanks in advance

    You might be
    able to design a trigger to do what you're talking
    about, but that would be a database thing, not a java
    thingAnother option would be an updatable view (google for usage), but it has limitations and should be used with caution. And yes, its a database thinggy and not java.
    cheers,
    ram.

  • How to add multiple table when creating add on using b1de

    Hi all,
    Plz help me
    How to add multiple table when creating add on using b1de.
    Thanks

    Hi dns_sap,
    Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
    If so, you can use the following code
    Add User Table
            Try
                Dim lRetCode As Long
                Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUDT.TableName = TableName
                oUDT.TableDescription = TableDescription
                oUDT.TableType = TableType
                lRetCode = oUDT.Add
                '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
                oUDT = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Add User Field
    Try
                Dim lRetCode As Long
                Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
                oUDF.TableName = TableName
                oUDF.Name = FieldName
                oUDF.Description = FieldDescription
                oUDF.Type = FieldType
                lRetCode = oUDF.Add
                '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
                oUDF = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Regards,
    Vítor Vieira

  • How to  show additional items in the same window using stacked canvas

    How to show additional items in the same window using stacked canvas.
    My content canvas has 14 items, and I have to include more.
    I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

    Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

  • How to insert a UUID into multiple tables in the same form

    I am trying to insert a UUID into 2 different tables at the
    same time ie to let this be created in the form and then insert
    this ID into 2 linked tables in a database using Access.
    Does anybody have any suggestions on how to accomplish this?
    Thanks very much

    So you have one form that processes information for two
    tables, or do you
    have two forms (one for each table - except the UUID)?
    If it is one form just run two SQL insert statements. One for
    the primary
    table, then one for the related table.
    If it is two forms run the above two SQL statements then an
    update statement
    to finish filling the second table.
    Or am I completely misunderstanding the issue?
    Bryan Ashcraft (remove brain to reply)
    Web Application Developer
    Wright Medical Technology, Inc.
    Macromedia Certified Dreamweaver Developer
    Adobe Community Expert (DW) ::
    http://www.adobe.com/communities/experts/
    "weelco" <[email protected]> wrote in
    message
    news:esjtjj$qtc$[email protected]..
    > Thanks for your quick reply, and yes I do know how to do
    that however I
    > would
    > like to do this all in one form field so I would like to
    create the UUID
    > whith
    > the same form that also submits it to another table, is
    this possible or
    > do I
    > have to do that using multiple 'pages'?
    >

  • How to manage multiple sizes of the same image?

    I recently took up LightRoom for all the good things it does. One of the things I need to do, however, is to create and manage multiple sizes of the same image needed for different purposes. I always found this cumbersome. I totally expected that the LR library would offer a solution for this but I looked and I didn't see anything. Sure you can export and resize in the process but then you're on your own. Am I missing something? Isn't there a better way? What does Adobe have in mind for best practices and how do you handle this?

    I can't speak for 99jon, but when I need multiple sizes, I export at the desired sizes, and then make use of the exported photos (upload, e-mail, whatever) and then delete the exports. Thus, there's really no need for me to keep track of the photo at this specific size, knowing that if I ever need it again -- unlikely -- I can regenerate it with the export pre-set, so I put no effort (zero!) into keeping track of photos at different sizes.
    The idea of adding it back into the catalog doesn't get me excited, and I would advise against it. I don't need this, and I don't see the benefit of keeping this particular size export for the long-term. As I said, I can always recreate it — but maybe you have such a need to keep these exports long-term and recreating it at a later point in time doesn't meet your needs? Can you explain?
    By the way, you can't resize a virtual copy, so that won't work here. The only time you can resize is on export.

  • How to see several windows at the same time?

    I know this is too basic.
    I have 1 window open.
    The tab shows 3 separate items each of which I can click on and see.
    But I don't want to see each window 1 at a time.
    I want to see all 3 items at one time.
    I know how to tile once I see all 3 windows.
    But how do I get to see all 3 at the same time?

    Peter Spier wrote:
    Tabs display one doc at a time. Any viewing method the shows multiple docs uses un-tabbed windows. That button I showed you above is one easy way to change from the tabs to a convenient arrangement of windows.
    So if you have multiple tabs, you can use the views button to arrange them so they are all visible at the same time.
    The Arrange Windows widget in the tool bar is sometimes confusing.
    Selecting any open window makes that the topmost active window; if it's near maximum size, you can't see the others, so this is also confusing.
    How about Window > Arrange > Float All in Windows to separate multiple tabbed open files, followed by Window > Arrange > Tile (or Cascade)?
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to display multiple reports at the same time

    Hi,
    I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
    I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
    call_report('report1');
    call_report('report2');
    call_report('report3');
    call_report('report4');
    The main problem is that, just the last report is been displayed.
    Is there some way to display report1, report2 etc in separate tabs or windows ??
    Regards
    Carlos

    You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
    The question is how you are calling the report.
    Here is how I manipulate it.
    After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
    Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

  • How to configure multiple clusters on the same machine.

    I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
    "This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
    Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
    Thanks,
    Jacob

    FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
    Re: UDP flood hosed my LAN?

  • How to avoid multiple session for the same username

    I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
    to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

    Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

  • HT3529 How to delete multiple messages at the same time?

    I'm new with and IPhone I try to delete multiple messages at the same time. and I can't find how to do this.

    Email messages? Tap the edit button...tap each message you want to delete...hit delete...once in trash, tap edit, then tap delete all.

  • Simultaneously Connecting Multiple Tables of the same Database to Textboxes of the same Form using a single ADO Control Code using VB6 Enterprise Edition and MS Access 2007

    Iv 10 Tables consisting of atleast 10 fields each in a single Database. Bt, Im only able to connect 1 table at a time to a form using an ADO Control. Im able to add data from table 'student' to text-boxes in my form. Bt, hw can I add data from field(0) of
    Table 'Student' to Textbox1 and data from field(0) of Table 'Marks' to Textbox2 using VB6??
    This is the current sample coding iv got to connect a single table to a form:
    Global con As New ADODB.Connection
    Global rs As New ADODB.Recordset
    Public Function Connect()
    If con.State = 1 Then con.Close
    con.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + App.Path + "\bca.mdb;Persist Security Info=False"
    End Function
    Private Sub Add_Click()
    If rs.State = 1 Then rs.Close
    rs.Open "select * from student", con, adOpenDynamic, adLockOptimistic
    rs.AddNew
    rs.Fields(0) = (Text1.Text)
    rs.Fields(1) = (Text2.Text)
    rs.Fields(2) = (Text13.Text)
    rs.Fields(3) = (Text4.Text)
    rs.Fields(4) = (Text5.Text)
    rs.Fields(5) = (Text6.Text)
    rs.Fields(6) = (Text7.Text)
    rs.Fields(7) = (Text8.Text)
    rs.Fields(8) = (Text9.Text)
    rs.Fields(9) = (Text10.Text)
    rs.Fields(10) = (Text11.Text)
    rs.Update
    MsgBox " Record Added"
    End Sub
    What can I do to add fields from 2 different tables to different text boxes within the same form using a single ado control using vb6 and MS Access 2007??

    Hi,
    Since VB6 product is not supported in this forum, you may go to these forums for support:
    #Where to post your VB 6 questions
    http://social.msdn.microsoft.com/Forums/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions
    Thank you for your understanding.
    Best regards,
    Franklin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • In OEM 12c, how to manage multiple incidents at the same time?

    Hi,
    Is there a way to manage multiple incidents at the same time? For example, if I want to assign owner for multiple incidents in the incident manager, is there a way to do this? Thanks for the help.

    This is currently not supported. This support will be available as part of the next patch set release.
    Please note that you can use Incident rules to assign owners to incidents as they come in or get updated.

Maybe you are looking for