How to see only one of two displays in Snow Leopard Screen Sharing?

I am trying to set up screen sharing and find that since I have two monitors working on the machine that I want to connect to, two monitors show up on the client that I am connecting with. This causes a problem in that the scaled screen image that appears on my macbook pro is too hard to see and work on.
Is there a way to specify only one monitor image to appear in screen sharing?

On my Mac OS X Screen Sharing display, it has a display selection pop-up in the upper left side of the Screen Sharing display
Both Displays: 3760 x 1920
Display 1: 2560 x 1440
Display 2: 1200 x 1920

Similar Messages

How to move only one or two applications from iMac to macbook air`

i cannot figure this out, the migration assistant will only let me pull everything over and i can't pick and choose. i also tried using disk utility and it will not let me select WORD to make into an .iso file. please help!

It seems that my presentation ‘Bucharest, Romania’ makes you consider me a total greenhorn, to not say idiot. I know, I had an Air. And I also had an external optical drive, bus-powered, LG. If there is no optical drive around, there are a lot of other methods to copy an optical drive unto your Air including creating an image (dmg, iso, toast) of that CD once and for ever. You must give a try and, on that occasion, make a list of all apps you need at hand, and put them together just in case. That is what I ahve been doing for years.
Greetings and good luck.
P.S. We must be prepared for post-optical drive era, therefore external disks. I have not bought any optical disk for months, but I have purchased one external drive every 6th month or so. You must do something for your older collection of CDs and DVDs—

I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

Obvious question, but have you got 'Find My iPhone' set on both devices? Settings>iCloud>Find My iPhone.

How can I see only one album by an artist?

How can I see only one album by an artist, in the album view?

Hi ladybugjlt,
Thanks for visiting Apple Support Communities.
See the "syncing manually" section of this article for help:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Regards,
Jeremy

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Can see only one photo per page. How to revert to multiple images per page?

First noticed on my iMac and now on my Macbook (10.4.9)--I'm no longer seeing a month's worth of photos on a single page. Only one photo per page, sometimes with miniature ones in the top border. I thought it was simply an inadvertent click on by part and easily corrected. But all attempts on both computers and reading of Help index haven't led to restoration of an entire page of photos and elimination of the annoyance. I'm wondering now if something I downloaded might have altered iPhoto program itself, making it impossible to view large numbers of photos at the same time. Any suggestions appreciated.
Cap

Cap,
This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
Regards.

DMS Connector for KM : I see only one document type from the document area

Hi,
The DMS connector is installed successfully on KM.
I can display folder tree and documents but I see only one type of document.
I mean, when I use transaction OAC0, I see different content repository defined in DMS.
I wonder where is the setting that specified which content is link to the DMS connector for KM.
Thanks in advance.

Hello Zbynek,
I installed the DMS once, but my experience how to use it is poor.
In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
It is not much, but maybe it helps...
best regards
Guido

Officejet Pro 8500 Premier - only one printhead is displayed in 'Printheads Health' window

I changed the black/yellow printhead today in my HP Officejet Pro 8500 Premier printer. When I closed the lid, the printer did its housekeeping thing, clicking away while it aligned heads, etc, and printed out a diagnostic sheet that looked terrific.
So I wanted to see what the HP Utility would report as the health of both printheads now. Only the Cyan/Magenta printhead health was displayed, both before I changed the printhead and now after I changed the printhead. The utility reported the Cyan/Magenta printhead was in GOOD condition, along with a green button.
But there was no image of the Black/Yellow printhead at all, so no button showing the health of the printhead that I just installed.
While I was installing the new printhead, I wiped off the gold contacts on the printer where the printhead's contacts would meet. They were clean.
Any suggestions aboutwy the software does not display the health of BOTH printheads?
My operating system is Mac OS X 10.6.8

Hello garden-2009,
Welcome to the HP Forums!
I understand only one printhead is displaying the health using the Officejet 8500. I will do my best to assist you! I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

I see only one WEB camera

Hello all
I have LV 7.1
I installed the two same identical WEB camera.
But in the LV I can see only one WEB camera - the first . The second cemera I don't see in the LV
Why ?
Respect
Iskander

Hey Iskander,
Check out the following KnowledgeBase called Accessing Multiple USB Cameras That Have the Same Name, and it looks like you have the same issue of having multiple cameras with the same name. The problem lies with your specific USB camera's driver in that it is not giving the cameras a unique camera name. There are a couple of solutions in the KB.
Also, since you are using the NI-IMAQ for USB Cameras driver, you will also want to check out some of the Known Issues that are now documented on the download page for the driver. First, this driver only supports acquiring from one USB camera at a single time, so you might want to consider using Firewire or GigE cameras. Second if you are considering using 2 USB cameras, you might be thinking that you can just acquire from one, close its session, then acquire from the other, and then go back and forth by acquiring and closing the sessions each time. But then another issue you will run into, if you do this in your program, is the second known issue of the IMAQ for USB Cameras driver, - Opening and closing a camera session causes a small memory leak, so it is not recommended to do this repeatedly.
Regards,
DJ L.

How to backup only one tablespace in cold backup noarchivelog mode

Hi,
How to backup only one tablespace in cold backup noarchivelog mode
Reagrds,
Rushang

We have to restore all 50 GB database if we fail in scripts meanwhile to start again the data load.
Out scripts populater only two tablespaces.
That's why if i take backup of those tabblespace then i have to restore only those tablespace not whole database.
Regards,
Rushang

Clean install and migration of only one or two program

How does one do a clean install and migrate only one or two applications.

I don't believe there is a "clean install" on the Snow Leopard disk if you launch the install from your standard system boot. I believe you need to:
1) Put the SL disk in the machine drive.
2) Restart your machine.
3) Hold down the 'c' key during startup, to boot from the SL disk.
4) Once the system boots up, it starts the Snow Leopard install process. However, you have a menu bar where you can run several system utilities, such as Disk Utility.
5) Run Disk Utility and erase/reformat the main system harddisk. This will give you a "clean" disk to install Snow Leopard on.
6) After Disk Utility finishes, proceed with the install process.
7) After intallation of Snow Leopard, restore any apps/data you want from backups and/or original installation packages.
Hope this helps,
j0hn

HT4623 i am seeing only itune and USB symbol in my iphone screen. How to fix it?

i am seeing only itune and USB symbol in my iphone screen. How to fix it?
I have connected my iphone to Computer....but i tune is not deteting the device it seems.
Could some one help me here?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.

How to boot only one group in remote machine from master machine

Hi,
I want to know the command to boot entire remote machine from master machine and how to boot only one group for remote machine from master machine.
Thanks
Amit

You can boot the entire remote machine (after booting the Master machine) as follows:
tmboot -B <lmid of remote machine> -l <lmid of remote machine>.
For all the available tmboot options see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
Regards,
Malcolm.

I can see only one ringtone in the custom ringtone box.plz help

i can see only one ringtone in the custom ringtone box.plz help

Cap,
This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
Regards.

Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes? I find it frustrating that I see only one at a time now ! Any suggestions please?

Where can I see the downloads LIST when downloading podcasts,
like in the older version of iTunes? I find it frustrating that I see only one
download at a time now ! Any suggestions please?

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

How to see only one of two displays in Snow Leopard Screen Sharing?

Similar Messages

Maybe you are looking for