How to see Process Chain Hierarchy

Dears sirs,
I would like to know all the hierarchy chain from a cube or an ODS. Can someone explain how to list all the Process Chain Hierarchy to the top (start)
Reagards,
Santos,

very Thanks.
This is what I am looking for.
Regards,
Santos

Similar Messages

What is the transaction to see "Process Chain Hierarchy"

Hello experts,
I would like to see the process chain hierarchy. Do you know the transaction which edit all the above hierarchy from a name of process chain.
For example, I have a chain called ZFG_SALES_ATTR_01 and would like to get all the chain which depends on ZFG_SALES_ATTR_01.
Regards,
Santos,

Thnaks for your answer.
The transaction RSPC does not meet my needs because it gives the top of the hierarchy and it is not really practical if you are looking for a chain from the bottom of chain to the top.

How to stop process chain, if it is taking too much time than expected.

Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
Thanks in Advance.
Harman

how I can stop the process chain ??
If the job is running for a long time ,
1)GOTO RSMO and SM37 and check the long running job over there.
2)There you can see the status of the job.
3)If the job is still running you can kill that job
4)delete the failed request from data target.
for more details go to this below link
how to stop process chain if it yellow for long time
how I can execute it again ?
GOto Function module RSPC_API_CHAIN_START
and give u r process chain name there.and execute.

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

How to schedule Process chains in Bi Admin Cockpit

Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please advise

Hi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona

How to change process chain in SAP APO, in RSCP tcode.

HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..

Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran.

How to create Process chain in BI 7.0

hi,
I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.

check these links..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

How to create process chain ?

hi all,
will you please simlify how to create process chain if anybody has a screen shot or slide show about pc creation it will definatly help me a lot.
rewrd point for sure,

This may help:
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045]
Regards,
Jordi

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

How to Trigger process chains??

hi all
How to Trigger process chains??
Can anybody step by steps??
thanks
Senthil

The background control options are available to directly schedule the start process. You can start the start process immediately , that is when activating the process chain, for a specified time, or after a particular event. When you activate the process chain, the start process is scheduled in the background as defined in your selections.
You can also trigger the start of a process chain via a meta chain. A meta chain is when a process chain, to which you set this start condition, is fixed to another process chain. The process chain is started directly by this meta chain.
When you start the start process via a meta chain, it is not scheduled after you activated the related process chain. The process is only started when the meta chain, to which it is linked, is running.
The remaining chain processes, that is the application processes and the collection processes, are scheduled to wait for an event.
The start process has the following special features:
Only the start process can be scheduled without a predecessor process.
The start process can not be a successor to another process.
Only one start process is allowed for each process chain.
One start process can only be used in an individual process chain

How to copy process chains

Hi Guru's,
Can I know the procedure how to copy process chains.
Thanks in advance
Sunitha
[email protected]

Hi,
Look at the threads below :
Copy Process Chain
Copy of Process Chain
Cheers,
Kedar

How to perform process chain monitoring

Hi All,
can u send me the steps how to perform process chain monitoring and what to do if we get any error in any process in the process chain. if possible if any one have the screen shots how to do kindly send me that link.
Thanks & Regards,
Naveen

Transactions used to monitor the Process chains
RSPCM
SE38 >/SSA/BWT or ST13>BW-TOOLS
--> clic on execute --> select the process chains radio button --> execute
--> click on process chains -->if you want to monitor the specific process chain enter the process chain id or if you want to monitor the process chains that are running in a particular date and time interval simply enter the values and click on execute...
it will display the process chains status and time of the runs etc...

How to Delete Process Chain?

How to Delete Process Chain?

When in the change mode of a process chain, choose the menu entry 'Process Chain --> Delete' (Only available on change mode).
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

How tp Deactivate Process Chain

Hi Experts,
How to Deactivate Process chain.
I have an IP in the PC which need to executed manually, but if i do that the processes which are preceeding IP in the chain are all getting triggered.
so before i start executing IP, i need to deactivate the PC.
Please throw some light how can i achieve it.
Thanks
Sanjay

Hello Simran,
even If i remove from schedule, once the IP triggers and after the load is success,i doubt those processes will get triggers.
are you sure that it will not triggers the following processes.
Thanks
Sanjay

How to see Process Chain Hierarchy

Similar Messages

Maybe you are looking for