How to see render/encode time for individual comps rendered in AME?
After rendering a number of comps in AME, following the new recommended workflow for H.264, I don't see any display of how long each render was. I do see a total for all the encodes at the top of the AME window. In the AE Render Queue, I can see when each render was started, and how long it took to complete.
Where can I get that information in AME?
Hi Experts,
Request your valuable inputs and support on achieving the above requirements.
Looking forward for your responses.
Thanks,
Bhargav
Similar Messages
-
How to see the change logs for billing document
Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjanhello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards. -
How to see the changes made for iPad in iTunes on my iPad?
How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?
Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-) -
How to increase the waiting time for response in Adapter Engine not in IE
Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true -
How do you display total time for playlist in Itunes 11
how do you display total time for playlist in Itunes 11
"I can see the total time in my playlist on the computer but not on my device??"
I have just posted a question asking the same!
Did you have any joy? -
How to see the Ringing Time of a Missed Call?
How to see the Ringing Time of a Missed Call?
I wanna see the missed call as a Genuine Call (Ringing for the full time) or a mere signal of a few second as a request for call back.
-
How to see FAT32 in solaris8 for x86!!
how to see FAT32 in solaris8 for x86 ,thanks a lot!
Refer man "mount_pcfs" for more information.
Hope it helps.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support -
How do you set the time for this forum??? Not in nerd pleas
how do you set the time for this forum?
There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.
-
HT204380 How i can install face time for my iPhone 4s & iPad 2 . Im living in UAE
How i can install face time for my iPhone 4s & iPad 2 . Im living in UAE
FaceTime has been banned in UAE, it can not be installed.
-
How to see the material document for Blocked stock
Hello Experts
I having some blocked stock in plant X , How to see the material document for this stock.
Thanks in Advance
Prashanth.v
Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PMwhich material documents do you want to see?
Material documents can be found and displayed in MB51 transaction.
in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa. -
How to see the group membership for a user in oidadmin
how to see the group membership for a user in oidadmin?
I see the memberships in oiddas, but I would like to know if its possible to see them in oidadmin? Thanks.Hi,
For what I understand, you know the user and want to know the groups that the user is member of (am i wrong?)...
With this query you pass the user's DN to the ldapsearch and the search gives you back the list of groups the member is a member of, all you need to do is change the value "uniquemember=cn=orcladmin" in the query for your own user.
For example:
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=orcladmin" dn
will give you the list of groups that the user "cn=orcladmin" is a member of.
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" dn
will grive you all the groups that the user smithj is a member of.
if you don't want to get the DN of the group you can change the last parameter of the query like this
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" cn
will give you the CN of the groups the user is member of.
let me know if this is what you need.
Regards,
Juan -
When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?
While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value. Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered. For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather" Apple iPhone 6 Case. The store had plenty of all the other colors, but that specific case and color had sold out that morning.
-
How to block calls based ANI for individual user?
I want to know how to block calls based on ANI for individual user in CUCM? Lets say if the individual wants to block calls from certain number.
Malicious call id - softkey will not work for our purpose.
calls come to cucm via mgcp gateway. cucm 9.x
thanks,How to block calls has been asked hundreds, and hundreds of times at CSC, a simple search would have provided you with all the necesarry information. Please search before you ask
https://supportforums.cisco.com/docs/DOC-19628
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
How to find the Response time for a particular Transaction
Hello Experts,
Am implementing a BAdI to achieve some customer enhancement for XD01 Transaction . I need to confirm to customer that after the implementation and before implementation what is the response time of the system
Response time BEFORE BAdI Implementation
Response time AFTER BAdI Implementation
Where can i get this.
Help me in this regard
Best Regards
SRiNiHello,
Within STAD, enter the time range that the user was executing the transaction within as well as the user name. The time field indicates the time when the transaction would have ended. STAD adds some extra time on using your time interval. Depending on how long the transaction ran, you can set the length you want it to display. This means that if it is set to 10, STAD will display statistical records from transactions that ended within that 10 minute period.
The selection screen also gives you a few options for display mode.
- Show all statistic records, sorted by star
This shows you all of the transaction steps, but they are not grouped in any way.
-Show all records, grouped by business transaction
This shows the transaction steps grouped by transaction ID (shown in the record as Trans. ID). The times are not cumulative. They are the times for each individual step.
-Show Business Transaction Tots
This shows the transaction steps grouped by transaction ID. However, instead of just listing them you can drill from the top level down. The top level will show you the overall response time, and as you drill down, you can get to the overall response time.
Note that you also need to add the user into the selection criteria. Everything else you can leave alone in this case.
Once you have the records displayed, you can double click them to get a detailed record. This will show you the following:
- Breakdown of response time (wait for work process, processing time, load time, generating time, roll time, DB time, enqueue time). This makes STAD a great place to start for performance analysis as you will then know whether you will need to look at SQL, processing, or any other component of response time first.
- Stats on the data selected within the execution
- Memory utilization of the transaction
- RFCs executed (including the calling time and remote execution time - very useful with performance analysis of interfaces)
- Much more.
As this chain of comments has previously indicated, you are best off using STAD if you want an accurate indication of response time. The ST12 (combines SE30 ABAP trace and ST05 SQL trace) trace times are less accurate that the values you get from ST12. I am not discounting the value of ST12 by any means. This is a very powerful tool to help you tune your transactions.
I hope this information is helpful!
Kind regards,
Geoff Irwin
Senior Support Consultant
SAP Active Global Support -
How to see the Container log for debugging in netbeans 4.1
Hi All
I am using the netbeans 4.1 with sun applicaion server 81. as my applicaion server. I have developed one ejb module and deployed it in server. Now I want to see the EJB container log for knowing how my beans methods are being called at the time of execution. Can any one please help me on this.
Thanks
Ranjan Rashmi Sahoo.
Mphasis BFL Ltd, Bangalore.
IndiaCould you tell me how to see the logger?Search for Log4J. It has a good documentation IMO.
Maybe you are looking for
-
How do I create a One to many relationship page in Dreamweaver?
How do I create a page in dreamweaver that comes up after the user logs in from the log in page that will allow the user to: Add, change and delete in 2 tables that are in my MYSQL database that is a one to many relationship One thing that is confusi
-
Is it safe for me to change the housing back color on my IPhone 5c?
Is it safe for me to change the housing back color on my IPhone 5c?
-
Date [deprecation] -- what other method?
Hi I was using somethine like this in my code: Date fecha2 = new Date(2009,4,24,20,30);And compiler, like java api 6, says that that method is deprecated. I want to get an object of Date type, so i dont know what other method i can use to have t
-
My mac make a lote of bugs , i use the mountaine lion 10.8.2
Interval Since Last Panic Report: 127893 sec Panics Since Last Report: 30 Anonymous UUID: BE498006-3041-7302-C3A2-A1BB37C4C52F Fri Jan 18 18:10:25 2013 panic(cpu 0 caller 0xffffff7f9396fb25): NVRM[0/1:0:0]: Read Error 0x0
-
Hi, I want to know is it posible to create sales order depending on the ATP for article through customizing if yes can pl. tell me the steps. Atul