How to see Reporting Agent Package Deletion Logs?

Hello, it seems that someone deleted some of our existing reporting agent packages in our production system. I am trying to figure out how to see the specific log for this deletion, does anyone know how/where to find this information?
Thanks,
Justin

That will only give me the execution/activity logs. I need something more along the lines of an object deletion log. For example, like when a request is deleted from a cube or an InfoObject is deleted.
Thanks

Similar Messages

  • How to see report of open po

    Dear All,
    how to see report of open po
    Rgds,
    Vikas

    Dear Vikas,
    ME2B                 POs by Requirement Tracking Number
    ME2C                 Purchase Orders by Material Group 
    ME2J                 Purchase Orders for Project       
    ME2K                 Purch. Orders by Account Assignment
    ME2L                 Purchase Orders by Vendor         
    ME2M                 Purchase Orders by Material       
    ME2N                 Purchase Orders by PO Number      
    ME2O                 SC Stock Monitoring (Vendor)      
    ME2S                 Services per Purchase Order       
    ME2V                 Goods Receipt Forecast            
    ME2W                 Purchase Orders for Supplying Plant
    Regards,
    Naveen.

  • How to see the pass folios when log in to another cell phone or iPad

    how to see the pass folios when log in to another cell phone or iPad

    You need to log into the content viewer with the same Adobe ID you used to create the folio. Note: iPad folios will not appear on the iPhone but should be available on all other devices.

  • How to use report agent to accelerate report processing?

    hi
       i have a report that runs 11 seconds. i have create aggregation for the cube, but it seems doesn't help much. i think may be report agent would helps. can anyone tell me how to create report agent to accelerate report processing step by step ?

    Please refer -
    http://docs.oracle.com/cd/E21764_01/doc.1111/e15867/reporting.htm
    http://jvzoggel.wordpress.com/2012/01/18/osb_tracing_report_action/
    Regards,
    Anuj

  • How to schedule reporting agent job?

    Hi,
    I have start a reporting agent pack after changing the
    variant. Now i have changed the variant.
    Then how to schedule the reporting agent pack?
    could any one help me out....
    Thanks
    Srinivas

    Hi,
    Check this.
    http://help.sap.com/saphelp_nw04/helpdata/en/45/67bd3cad649f5ce10000000a114084/content.htm
    Regards.

  • How to see the business packages in my system..

    Hi,
    I have installed ECC6.0 with ABAP+JAVA componets on windows 2003 server. I wanted to see what Business packages installed in my system. Can you Please help me how to check the business packages means path.
    Thanks for you responses in advance.
    Regards,
    Bhaskar.T

    You can check in following ways:
    1. System Information --> All components
    2. You can also look for portal content for each business packages in Platform Based Content under Content provided by SAP.
    Hope this helps.

  • Can't see Reporting Agent in Administrator Workbench

    Hi Team,
    I cant see the reporting agent in administrator workbench window in BI,
    I am using SAP NetWeaver BI 7.0 via transaction rsa1.
    kindly let me know are there any settings which would make this reporting agent avaiblable?
    Regards
    blusky

    Chk these links...
    Information Broadcasting Part 1 u2013System Parameter Setting
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40811e9c-4edd-2a10-06bd-c41e475f607a
    Information Broadcasting-Part 2 -System Settings
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/709d747f-6b08-2b10-8f8c-b3e3c8c4ccd3

  • How to see events in /var/cluster/logs/eventlog file?

    Hello,
    I want to see events in /var/cluster/logs/eventlog file.
    I read about showev4 but I have two problems:
    * this executable is only for SPARC system and we have x86 systems
    * I transfer the file to a SPARC system to try to analyse but I get a core.
    Best regards,
    Emilio J.

    Transferring a SPARC binary to an x64 system will not work. They are completely different chip architectures. I think the eventlog file is for support staff only. It is not documented in the SC manuals as far as I can tell.
    Tim
    ---

  • How to see materials marked for deletion

    Which is the T-Code to see  materials marked for deletion . if yes where

    Hi RM,
    You can check material marked for deletion by using transaction code MM06.
    On this screen you can check whether material is marked for deletion at Client level, plant level, storage location level, valuation type level, Sales org level, Warehouse number level or storage type level.
    Hope this resolves your issue, reward if helpful.
    Regards,
    Avinash.

  • How to identify the info package deleted by someone in process chain?

    Hi all,
    I can see a couple of info packages were deleted in the production system and it was removed from the process chain too!!
    how to identify who has deleted the info package in the production system:?
    Thanks

    Can you is there any transport available with the Infopackage deletion activity?
    in SE01 you can check in production system and check if your IPAK is stored in it or not..? IF yes then you can check the user.
    Also you can track is there any deletion transport has come from D to P or Q to P? Can you check whether the IPAK is available in D and Q?
    Also you can check the process chain recent modified by in RSPC and check if there is any user details were captured?
    OR you can also look at in transaction SLG1. Check for the logs..
    Hope this helps,
    Murali

  • How I can report old packages in repos??

    Hi
    Seamonkey in Community repo is the old version(2.16.1-1) so i can't install many addons and I don't know how to report this!
    Thanks a lot!

    ewaller wrote:Give the TU some time, they work their tails off for free and generally do a great job.
    Actually we just laze around the Arch Linux tropical resort sipping exotic drinks and occasionally wade in the pool. When you click the flag out-of-date button, the bartender gives the responsible TU a red cocktail umbrella instead of a green one so he knows to update his package during his next massage session. I for one actually find it quite relaxing to watch the gcc output fly past as I get a full body massage. Those padded tables with faceholes are ingenious!

  • How to see Report for the last 12 months using saved filters

    Hi
    I need to display the last 12 months report using Saved filters
    When i tried to didplay the report it is showing like SQL error
    Can anyone help me how to diplay the report of last 12 months using Saved filter.
    Thanks & regards
    Manu

    Hi Refere the below thread,
    http://shivabizint.wordpress.com/2008/09/19/rolling-months-data-for-year-month-prompt-in-obiee/
    Curtesy by Shiva.
    Thanks,
    Balaa...

  • Reporting agent functions

    can any body xplain how to schedule tasks thru "reporting agent". pls xplain in detailed steps.

    Hi,
    The functions of the reporting agent are triggered by Information Broadcasting.
    The Reporting Agent was not developed any further. It was removed from the current version of the Data Warehousing Workbench. You can now only reach the Reporting Agent using transaction code REPORTING_AGENT.
    Effects on the Dataset
    A migration of Reporting Agent settings and Reporting Agent packages by broadcast settings is not planned.
    No more new developments are being made for the Reporting Agent. The Reporting Agent functions are now covered by Information Broadcasting, SAP NetWeaver Portal and the Alert Framework. The Reporting Agent has been removed from the Data Warehousing Workbench. You can still maintain the Reporting Agent settings using the REPORTING_AGENT transaction. These settings can be maintained for queries and Web templates from SAP BW 3.x only.
    General Practices with Migration
    The system does not support the migration of Reporting Agent settings for information broadcasting.
    The Reporting Agent is a tool used to schedule reporting functions in the background.
    The following functions are available:
    ·        Evaluating exceptions
    ·        Printing queries
    ·        Pre-calculating Web templates
    ·        Pre-calculating characteristic variables of type pre-calculated value sets
    ·        Pre-calculation of queries for Crystal reports
    ·        Managing bookmarks
    Note that you can only use the Reporting Agent if you are working with queries and Web templates in the SAP BW 3.x format.
    As of SAP NetWeaver 2004s, the Reporting Agent functions are covered by Information Broadcasting. We recommend that you use Information Broadcasting instead of the Reporting Agent.
    For more information, see Information Broadcasting.
    Use
           1.      You make settings for the specified reporting functions.
           2.      You assign the individual settings to scheduling packages for background processing.
           3.      You schedule scheduling packages as a job or within a process chain.
    The last two points do not apply to managing bookmarks.
    Structure
    The Reporting Agent interfaces are made up of two tree structures in the functional areas Exceptions, Print, Web Templates, and Value Sets.
    ·         The left-hand tree gives you an overview of the available objects as well as the settings that have already been made. To give you a better overview, you can filter according to queries with settings in the Exceptions and Print functions.
    ·         The right-hand tree gives you an overview of the scheduling package and manages the background processing.
    In the Bookmarks functional area, the Reporting Agent scheduler interfaces are made up of a single tree structure.
    Integration
    The following graphic gives an overview of the different functional areas for the Report Agent and its integration:
    See also:
    Defining Exceptions Settings and Exception Reporting
    Defining the Print Setting
    Defining the Web Template Setting
    Defining the Value Set Setting
    Defining Crystal Reports Query Settings
    Managing Bookmarks
    You have defined and actively saved one or more Reporting Agent settings.
    You have created one or more scheduling packages.
    Procedure
    Select the setting that you want to schedule in the left Reporting Agent Settings tree in the Reporting Agent Scheduler.
    Use drag and drop to assign the setting to the corresponding scheduling package in the right-hand tree.
    If the selected Reporting Agent setting from the Exceptions or Print function areas relates to a query with variables, you must select a variant of the query so that the scheduling package can be scheduled.
    You are in the view  Change in the right-hand tree of the Reporting Agent Scheduler. From the scheduling package context menu, choose Assign Variants The Variant Catalog. dialog window appears.
    Select the variant you want and choose  Select. The system adds the selected variants in the right tree in the Reporting Agent Scheduler in the Variant column.
    If you want to create a new variant for the required query or if you want to change variants already created, you have the option to process the variants in both the left and right-hand tree in the Reporting Agent Scheduler.
    Select Maintain Variants via the context menu of the Reporting Agent setting. You the see a screen on which you can process the variants for the selected query ( Create,  Display,  Change).
    Select the required variants as described above.
    Choose Next.
    You use this function to monitor and change the time and date settings on the mobile device.
    Prerequisites
         You have assigned the mobile device to a particular time zone.
         The synchronization service has been configured.
    Features
    You have the following options:
    Parameters for TIME_AGENT
    Parameters
    Description
    Possible Values
    AGENT_MODE
    Activate or deactivate monitoring
    ON, OFF
    AGENT_HISTORY
    Activate and deactivate the log function for the time and date setting
    TRUE, FALSE
    AGENT_HISTORY_INTERVAL
    Define intervals for logging (in minutes)
    AGENT_REPORT_ON_FIRST_CYCLE
    Or AGENT_REPORT_ON_SECOND_CYCLE
    Define synchronization cycle for sending data if the device is used by multiple users.
    Set at least one of the parameters.
    TRUE, FALSE
    AGENT_TRIGGER_ON_SYNC_COUNT
    Or
    Define the number of synchronization cycles run before data is sent to server
    Any integer
    0 – Never
    1 – With every synchronization
    2 – With every second synchronization
    AGENT_TRIGGER_ON_SYNC_INTERVAL
    and AGENT_TRIGGER_ON_SYNC_INTERVALTYPE
    Determine the intervals (type and interval) with which the data is sent to server
    Interval type:
    M – Minutes
    H – Hours
    D – Days
    Interval:
    Any integer
    0 – Never
    1 – In intervals of one minute, one hour, one day.
    Activities
    You define the values for the parameters in a parameter set (see Defining the Parameter Sets). Use the TIME_AGENT type to monitor the time and date settings.

  • Problem with "subject" & "recipient list" of reporting agent

    Hi,
    I've created an exception in a query & assigned "E-mail notification" for this exception in reporting agent. I entered "Subject" field and assigned "distribution list" to "Recipient list" field in the e-mail notification attributes.
    After transporting, reporting agent & package, everything moved fine but subject & recipient fields are not carried over to Quality system. both the fields are blank.
    What is the problem?
    How do I make sure that these 2 fields are also transported to Quality & Production rather than manually maintaining them again in the target system.
    Appreciate any help.
    Hari Immadi
    http://immadi.com
    SEM BW Analyst
    Message was edited by: Immadi Hari

    Hari,
    Did you ever get this resolved?  We are currently experiencing the same problem.
    Thanks,
    Bill Lomeli

  • The role of Reporting agent once we have BEx Broadcaster

    Hi all,
    I understand the BEx broad caster does the pre calculation of Web template, distribution by various mechanisms...So in this context, how and when Reporting agents will be necessary ? Can any one give the differences between those two ??
    best regs
    D Bret

    Dave,
    For some time both will be needed. It is true that some things Reporting Agent did, send a report, BEx Broadcaster does better. But certain Reporting Agent features have not migrated yet. Here's how to think about it: If you want to run a query and store the data in a table for later use, you still need Reporting Agent. This covers priming the OLAP cache, Web template precalculation, pre-run Exceptions, etc.
    If you want to present these query results, the means have moved to BEx Broadcaster. That's emailing a workbook, emailing a query result or a link, publishing in the Portal.
    (Not) Coincidentally, the first set of features are mostly or exclusively ABAP-based and the second set is based on NetWeaver Java WAS.
    Hope this helps,
    Doug Childs

Maybe you are looking for