How to see SAP NOTES ( asking for username & password )

Hi all,
where to check for SAP NOTES? it is asking for user name & password. how to get this USERNAME & PASSWORD to read all  SAP NOTES ??
Regards
pabitra

You have to ask your manager to get OSS User ID and Password.
They must have User id and password,get it and use that one in service.sap.com
Thanks
Seshu

Similar Messages

  • TS1398 my ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wif

    My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.

    - Reset the iPod. nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

    How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

    Thank you for the help, have sorted it through Restrictions in General settings now : )
    No more mysterious app purchases on my c.card now thank god !!
    You would think they would set as default that Password was required - Imediatly . But they know there likely to get more purchases the way the default set it..
    Thanks again for prompt reply!!!

  • SDK Trunk. Update my local copy has started asking for username/password

    SDK Trunk. Update my local copy has started asking for username/password
    these has been happening on and off for a few days now.
    when i click update on my local copy of the sdk ready to do my morning build I've started to be asked for a username and password. I do have a username and password for sandbox and patching etc but entering this has no effect.
    are there times of day when the trunk is locked or something like that? This is not happening all the time but it is several times a day.
    has anyone any idea why this is happening
    Ive don e all the usual things, clean my local version, grabbed a totally new version etc
    im on windows using TortoiseSVN(which is always using a current build)
    cheers
    g

    Ive had this same issue on and off across all the open source svn
    im yet to find any pattern apart from the fact that the auth error only ever shows the root of the svn request.
    Ie http://opensource.adobe.com/svn/opensource/
    Now im not sure if thats just the way the reporting ui works of if it indicates that somewhere in the update it starts to trigger the url rot and thats where the auth request gets triggered. This may be total nonsense. Just a thought.

  • Why is my Thunderbird email account suddenly not asking for a password?

    I have shut down my computer and when I go into my email account it for some reason does not asked for my password....Not sure what has happened. Would appreciate any help...

    From the Menu Bar select '''Tools-Options-Security-Passwords-Saved Passwords'''
    Delete the saved password entry and restart Thunderbird.
    No menu bar with Tools? Press the alt key.

  • Not asking for network password

    My company guest network wifi  updates n/w password every day. When I switch on my MAC book there will be a popup screen asking for network name and password( auto join network). But some times, it is not asking for the password once it expires. I restarted mac book, but still its could join network and i donn have any way to enter the new password.

    add this to your start-up: gnome-keyring-daemon --components=gpg
    Edit: and install gnome-keyring ofc
    Last edited by MakeTheGOD (2015-04-28 05:24:33)

  • Portege M400: Why am I not asked for a password at boot?

    Hi,
    I have a Portege M400 and I used the Toshiba Security Assist software to set up a BIOS boot password as well as an HDD protection password. This software, as well as the actual BIOS (Esc+F1 at boot) both show that the password I set is registered/recognized.
    However, I am not actually asked for either of those passwords when I boot the computer!!!
    I have a dual-boot system with the original WinXP for Tablet PC on one of the partitions, and an Ubuntu Feisty on another. My boot loader is GRUB but I don't understand why that should affect the behaviour of the BIOS that should happen before it calls the boot loader...
    Can someone help me with this? It would be really important for me to protect my BIOS and the hard drive.
    Thanks in advance,
    dsokus

    1. Check your security settings with the Toshiba password utilty. Are these configured correctly?
    2. Did you set the user or the supervisor password? If you only set the supervisor password you are not asked for the password.
    3. Try to set the HDD and User pw in the initial bios setup (press ESC when prowering on).

  • Erased all saved passwords, rebooted, now TB does not ask for new password!

    I erased all saved passwords as I've had to change the passwords on my accounts. I then rebooted and now TB does not ask for new password. I have rebooted entire computer and still no change.
    Thanks!

    I presume you removed the passwords via Tools > Options > Security > Passwords tab.
    Do you have these settings in Account Settings:
    Tools > Account Settings > Server Settings for the mail account.
    * select: 'Check for new messages at start up'
    * select: 'check for new messages every eg: 15 minutes'
    * select : 'Automatically download new messages'
    make other prefered settings and click on OK to save changes.

  • HT204400 Apple TV will not ask for my wifi password to connect - it says it is connected but it is not- i click on my wifi and says connected but does not ask for my password

    I just hooked up my Apple TV - it is all connected correctly- when my wifi comes up on my tv screen i click and select it. It then says it is "connected" , but it is not as is it has not asked for the password for my wifi. I have turned it all off and back on, I have restarted it as well. I do know why it will not ask for my password - am I missing something?

    It will not ask after it is already connected.  Is ATV working?  Can you connect to the iTunes store, Netflix, etc?

  • Windows not prompting for username/password

    I'm trying to access my NAS200 via a Windows Vista Home Premium computer. It sees the drive but when I open it I can only access what's made available to 'guest'. I'm trying to login with the admin credentials so I can see shared folders that only admin has access to. 
    I tried mapping the drive and using the admin user/pass but that doesn't work either. If I try to access a folder directly such as \\nas200\private - windows says it doesn't exist when it clearly does. The only way I'm able to access my files at this point is through the web interface which is not good enough since I need to perform backups to a private folder.

    I went to edit a user and it wouldn't let me, so I powercycled and it worked. Now I want to change permissions on the folder for that user but when I click save the permissions do not save.
    When I updated the username to match my windows user profile name, it gave me share access based on the username in the NAS settings. It didn't ask for a password or anything. So in theory if I change my windows profile to admin then I'll have admin rights on the NAS.
    What the hell is going on here?

  • How do i stop Mail asking for Keychain password?

    I have my Keychain set up with a password.
    I'd like to allow Mail access to the relevant parts of the Keychain WITHOUT needing me to enter my password all the time.
    How do I do it?
    So far I've gone into Keychain Access, found my mail (IMAP & SMTP) passwords and added Mail to the list of applications to always grant access to, but it's still asking for my password.
    Could it be due to my @me.com email? If so, what do I need to grant access to as I can't see any specific IMAP/SMTP me.com passwords.
    thanks,
    donncha

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • Keeps asking for username password proxy server

    When i start Firefox 8 at work, Firefox keeps asking for username and password. I have fild in the network settings to not use a proxyserver for: 150.0.*;12.0.*.
    Now the startpage of Firefox is our ourIntranet which is: http://ourintranet (which has a ip example: 150.0.2.3
    So what i want to do is: use proxy except for this ip: xxxxxxxx, because this ip is http:\\ourintranet
    Now i cannot go to http:\\ourintranet because he keeps asking for password.

    I'm not sure why it's not working. I think Firefox looks in the hosts file and then the configured/automatic DNS server for address resolution, in that order. To specify otherwise (for eg. a proxy for address resolution) the [http://kb.mozillazine.org/Network.proxy.socks_remote_dns network.proxy.socks_remote_dns] in [http://kb.mozillazine.org/About:config about:config] has to be set to true.
    You can also check in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. A new profile would have the default settings and wouldn't usually have any installed extensions and would be clean. You can try then try the proxy settings.
    The 150.0.2.0/24 should work (24 bits for the network with 254 addresses - http://www.subnet-calculator.com/cidr.php) unless perhaps the network is super-netted in which case you can also try the supernet prefix instead of /24.

  • Router No Asking For Username/Password

    Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.
    Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.
    I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
    The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting usename and password? However, once there you can go right into the setup screens by clicking OK.
    I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or myrouter.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.
    I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
    The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
    I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.
    I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.
    I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.
    I'm not professing  to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
    Again I hope SOMEONE from Cisco sees this and investigates.
    Thanks for allowing me to "rant".
    Dave

    Thank you zee29 for the reply however, when I change the router password under administration I'm presented with a screen that says the router's password has been changed on my next Cisco Connect startup. I click OK and then I'm presented with a screen that says BOTH passwords must be the same. This is crazy. My router is not secure on my desktop. Anyone who uses my desktop and wants to "fish" around can enter my router's settings without being presented with a password prompt.
    And I'm still presented with the problem of connecting via 192.168.1.1. or myrouter.local using IE 8 in which a "page cannot be displayed" message appears. I can log in via Google Chrome however, once I enter the username and password once I'm able to access router without being prompted. The network isn't totally secure.
    I have seen other posts where these Cisco routers are having "problems" when using IE. It would seem to me that Cisco would want to rectify this situation. Its not like I'm running a beta operating system that Cisco is not aware of. I'm running an XP system that is totally updated.
    I've been running Linksys/Cisco routers for years and have never had these problems. If these "problems" continues I will have no choice but to purchase a router from another company such as Netgear and say goodbye to Cisco.
    I want and need a SECURE network.
    Dave

  • I cannot hook to my wifi it shows it but will not allow me to hook to it. I have a password but it does not ask for the password just tells me to dismiss

    My I phone 4 will not hook to my wifi. All it says is cannot connect to netgear then dismiss. I have a pssword but it does not ask for it Thanks

    Well, what exactly isn't working? Do you get any errors? What system are you on? As a start, check this:
    Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual
    Mylenium

  • How do make your router ask for a password everytime your computer connects?

    I already set up a password for my router, but if i connect to my router it doesn't ask for a password. It used to ask me before i changed my internet provider.
    So pretty much, how do i make my router request a password everytime i connect?
    thanks

    Please visit the Thread re: New laptop/new router.. Help please. All informations were well detailed by Sriraj.

Maybe you are looking for