How to see Segment Version in IDoc
Hi,
is there any way to see the Segment Version in an IDoc ?
We had the problem that an old version(Segment) was entered in the WE20(receiverdetermination) and we havent known this.
any ideas ?
Gordon
hi Michael,
that is not the thing i wanted.
If you have the newest version in WE31 but you have entered an old release in WE20 outbound parameters. The idoc is filled with the old segment version.
I only want to see the segment version in the outgoing idoc ?
IS there a way to see that ?
I have changed the release in we20 and after that the newest segment version was taken the idoc was ok!
Gordon.
Message was edited by: Gordon Breuer
Similar Messages
-
Idoc segment version in idoc type
hi,
we have just upgraded our R/3 system from 4.6c to SAP ECC 6.0. We then tried to send idocs to SAP XI 3.0 SP 20. However the idocs failed due to wrong segment version of idoc. It did not match the loaded metadata in XI. I know that in WE20 you can control the segment version used to send to XI. In the communication channel in XI you can also set the segment version.
So my question is: Is the correct way to handle sytems requiring diffenrent verions to import the newest metadat in idx2 and then control the versions asper the above paragraph?
Any comments are apreciated.
kr RasmusHi,
for sending IDocs to XI no adapter is necessary. It should be enough to reload the metadata in idx2:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards
Patrick -
How to include segments to standard idoc PEXR2002 ..
How to include the below segments to the standard idoc PEXR2002 ..
E2EDK02
E2EDK12
I want to map the check number to E2EDK12-BELNR depending on the document number.
I have a recording in shdb..but my real question is it where to have this logic..
Any suggestion would be highly appreciated.
Thanks,U will have to create IDoc Extension for this.
Goto WE30 select the Radio button Extension.
Link it with the basic Idoc Type.
Then attach the new segments in the IDoc. -
How to see WAS version and XI/PI version..?
Hi folks,
Can anyone tell me how to see the WAS version and XI/PI SP number.
thanks in advance.
Srinivas Reddy.Hi
Please check this :
http://<host>:<port>/sap/monitoring/SystemInfo
http://<host>:<port>/sap/monitoring/ComponentInfo
Hope it helps
Regardfs
Arun -
How to see the versioned project
Hi! Experts,
If a project version is created using cn72, how to check the versioned project.
mrdHi,
Virender has already answered ur query. Goto CN41/CNS41, look if you dont see input field for Version, click on 'Change DB profile' button at the top. Check tick box 'Version data' under origin section. Now you can see a new section on selection screen ie 'Origin of data', here in version you can specify the version and execute. remove other entries befor executing.
Regards -
How to see diffrent version of object.
Dear Experts,
Can i see diffrent versions of data source & transfer rule. Because after EHP4 upgrdae in R/3 , i had to activate souce system & replicate data sources in BW. There are some changes in data sources , i want to see previous version & compare with present version.
Regards,
Anand Mehrotra.Hi Anand,
I hope the changes have been made in Development system.
Goto Testing/Production environment & check for the previous versions of the objects & you can comnpare them accordingly with the Development system changes.
Hope it helps!
Regrads,
Pavan -
How to see what version of Cisco Jabber end users have installed
We are running CUCM / CUP 10.5.1. Where would I be able to see which versions of Jabber are in our environment? I want to upgrade everyone to Jabber for Windows 10.5, but first I would like some visibility into our current environment.
We are running Jabber for Windows in Deskphone mode, so there is no CSF device. Any way to see what version of these clients?
-
How to see data records of idoc?
Hi
Can anybody tell me how can i see the data records of idoc..
i think its stored in EDID4 table..but i am not able to see the sdata fieldhi Gaurav,
Just follow the steps:-
1.Go To Transaction WE05.
2.Click on execute.
3.This will open Inbound/Outbound list of IDoc
4.Just select any Idoc and double click on it.
5.This will open Idocs three segement namely status,data and Control
6.Double click on Data Segment and u will see the data in it.
Regards,
Ashwin M
[Reward for the Helpful answers]. -
How to ignore segment occurances in IDoc
Hi
I have a IDOC to file scenario.
How do i ignore the first segment of a multiple accuring segment. For Example if the segment E1EDXX occurs 5 times in the IDOC i have to ignore only the first (segment)occurance and the remaining 4 (segment )occurances shold be mapped to the target
How can i map this
Any udf or nodefunctio combination would really be appreciated
Thanks
-keerthiHi
You can try to build an UDF
//you initialize the array since one.
if (list.length >=5){
for (int i =1; i < list.length ; i++)
{ result.addValue(list<i>); } -
Numbers Files: How to see previous versions
How do you see all previous versions of the files
If you are using Numbers on the Mac and you have a document open, try this (in your File menu):
If you don't have a document open (perhaps because it refuses to open) you can use Time Machine.
In Finder hold down the option key and Go > Library > Mobile Documents > com~apple~Numbers.
Go back in Time Machine on the folder and 'Restore' the version you want.
SG -
[SOLVED] pacman: updating package. how to see old version?
Hi,
is it possible to see the old version of a package before doing an update? "pacman -Suu" only shows the new version and not the installed version
Thanks
Last edited by genmich (2010-08-24 20:22:55)genmich wrote:
Hi,
is it possible to see the old version of a package before doing an update? "pacman -Suu" only shows the new version and not the installed version
Thanks
Actually, it shows both the old and new versions in a very pretty way:
[karol@black apps]$ sudo pacman -Suu
:: Starting full system upgrade...
warning: hdparm: downgrading from version 9.29-1 to version 9.28-1
warning: intel-dri: ignoring package upgrade (7.5.1-2 => 7.8.2-1)
warning: libdrm: ignoring package upgrade (2.4.19-1 => 2.4.21-2)
warning: libgl: ignoring package upgrade (7.5.1-2 => 7.8.2-1)
warning: lrzip: downgrading from version 0.46-1 to version 0.45-1
warning: stfl: downgrading from version 0.21-2 to version 0.21-1
warning: xf86-input-evdev: ignoring package upgrade (2.2.5-1 => 2.4.0-2)
warning: xf86-input-keyboard: ignoring package upgrade (1.3.2-2 => 1.4.0-2)
warning: xf86-input-mouse: ignoring package upgrade (1.4.0-2 => 1.5.0-2)
warning: ignoring package replacement (xf86-video-intel-legacy-2.3.2-3 => xf86-video-intel-newest-2.12.0-1)
warning: xf86-video-vesa: ignoring package upgrade (2.2.0-1 => 2.3.0-2)
warning: xorg-server: ignoring package upgrade (1.6.3.901-1 => 1.8.1.902-1)
warning: xorg-server-utils: ignoring package upgrade (7.4-7 => 7.5-5)
resolving dependencies...
looking for inter-conflicts...
I have all of the above packages in IgnorePkg:
IgnorePkg = xorg-server xorg-server-utils xf86-video-intel-legacy xf86-video-vesa xf86-input-evdev xf86-input-keyboard xf86-input-mouse intel-dri libgl libdrm -
How to see what version of ios is on my iPad 2
I am still a new Apple user. I want to set up ICloud on it ansd the 1st thing it asks is Do you have the most resent version of iOS.
So that's where I'm stopped.Check: Settings - General - About - Version = ???
-
How to see the version of firefox im using?
I have to which version of firefox im currently using? so that i can install latest version.
Aurora is a web browser, it is a development version of Firefox. It is used for those who want to test the features and innovations that are intended to be in the next version of Firefox.
The development builds are not intended for most people, only for those who are happy with testing programs. -
How can see what version of Snow Leopard I ave
I am not sure what version of SNow Leopard I have. Where to I look to find this info?
Hi,
Click on the Apple logo at the Top left hand corner of your screen and select About this Mac...
Cheers, -
How can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version
Hi All,
Can any one help, how to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
Given BADI name was----VENDOR_ADD_DATA_BI .
ThanksAnil,
look at this thread ..may be this helps you.
Re: 824 IDOC and BADI/User Exit
sateesh.
Maybe you are looking for
-
My 6th generation iPod nano won
I'm unable to use the "shuffle" feature on my 6th generation iPod nano. Any thoughts?
-
Migrating from Oracle to SQL Server - data won't migrate but no errors
I'm attempting to migrate a database from an Oracle 11g (11.1.0.7.0 64-bit) database to a SQL Server 2008 R2 (10.50.4033.0). I'm using SSMA, and the Oracle tool was installed on the target SQL Server by the DBA. I've completed all the steps up to a
-
Trusted devices for 2 step verification
I have set up 2 step verification with 2 trusted devices - my iphone and my partner's iphone. The problem is that they both have the last 6 digits of the phone number the same. So when I get the option for which phone to receive the code I get a li
-
Adobe AIR - java is not recognized as an internal or external command operable program or batch file
Hi, I've done everything as in the HelloWorld tutorial but when i run this cmd: adt it gives me the following error java is not recognized as an internal or external command operable program or batch file I've installed the AIR runtime v2 Downloaded
-
I'm using JDeveloper 10.1.3.0.4 I use the find in files constantly so this is slowing me down. When I get the dialog for "Find in Files" it doesn't show a search text input area. It seem like there is a way to search by selecting text in the current