How to see system status in spro. How to assign business transaction to user status.

Hi All,
How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
Also share how can we assign business transaction to user status for maintenance order

Peter,
You cannot see the system-status in SPRO.
You can view the system-statuses via BS23.
Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
PeteA

Similar Messages

  • In service order Search page,In Service Order Search criteria, In Status value drop down i have to show only user status?

    Hi Team,
    My requirement is In service order Search page,In Service Order Search criteria, In Status value drop down i have to show only user status values only? how to do it..now in my status drop down values system status values also displayed ,i want only user status values only i have to show...how to do it?
    Thanks
    Kalpana

    Hi Kalpana
    As Standard there are 2 separate search fields for Status.
    One for User Status
    One for System Status
    Are you sure that the other Status value you require are not for other Service Transactions different to the one you are wanting to search on?
    If you need to make a only the User Status for  a given selected Transaction Type, then you would need to make an enhancement to that Component
    Regards
    Arden

  • Business transaction 'Close' sets status 'REJC' and 'ERLD'

    Good day everyone!!!
    I added a new status  "Rejected (REJC) " the behavior is similar to standard "Confirmed(ERLD)" .
    (coppied from Confirmed
    After this system says:  
    Business transaction 'Close' sets status 'REJC' and 'ERLD'
    Message no. BS292
    Diagnosis
    You specified in the procedure control of status REJC and status ERLD that both statuses be replaced by the procedure 'Close'. Both statuses have a status number.
    System Response
    When the procedure 'Close' runs, the System will try to set statuses REJC and ERLD. They cannot be active at the same time because they both have status numbers so the entry is rejected.
    Procedure
    Delete one of the two statuses
         or
    give only one of the statuses a status number
         or
    change the procedure control.
    Questions:
    1) Is it possible to get rid of this message?
    2) if possible, how ?
    3) what problems we may have, after doing this ??
    Regards
    Sindry
    Edited by: Sindry on Jan 5, 2011 9:59 AM

    hmmm seems the problem i got was a bit weird. the first server that I was using was only a Windows 2000 Professional Edition. When I installed both database and OAS in a Windows 2000 Server , I was able to deploy the WAR file properly and no NLS error was displayed. However, I'm still getting the servlet not deployed problem.
    I'm getting this in the status display of the WAR File
    context Not Loaded Servlet org.springframework.web.context.ContextLoaderServlet 0 0 0 1

  • Business transaction control in status schema regarding date determination

    Hi all,
    is there a business transaction in the status schema that can control the date determination ?
    My problem is that the dates are redetermined every time I change status. I can't set the flag "Determine date only once" in the date profile because I wan't the dates to be re-determined when I change the priority. But not when changing the status. How is that controlled ?
    Best regards
    Annette

    Hi Anette,
    ITS not possible to control the date determination with standard customizing. Its the event handler CRMV_EVENT that triggers the date determination on change of status. Functions CRM_DATES_RESET_CALENDAR_EC and CRM_DATES_ACTUALDATE_SET_EC are defined for object name STATUS on Event AFTER_CHANGE. You would need to modify this to change the standard functionality.
    Hope this helps.
    Kind regards,
    Vanessa

  • Business transaction Control in status profile.

    Hi Friends,
    Can anyone please explain me? in tstaus profile we maintain status and then in status we create new entries for Business transaction Control.
    Please explain me the below maintion each if possible in detail.
    Change configuration data
    Complete
    Create billing document
    Create delivery
    Create inquiry
    Create quotation
    Create sales document
    Goods issue delivery
    Incoming invoice
    Incomplete req. configuration
    Lock
    Material assembly
    Material purchase order
    Material purchase requisition
    Param. Effectivity Val. Assgmt
    Post goods issue
    Unlock
    reply awaited.
    Reagrds/ashu

    Hi,
    Status Profile:
    Eg
    You want pricing for a certain sales order type to be checked before billing is possible. You can do this by specifying that the document automatically receives a self-defined status which prevents billing.
    Actions
    1. Define a status profile.
    2. Assign one or more statuses to the status profile.
    3. Determine for each status whether it is to be set automatically or manually when creating the document.
    4. Define for the status which business functions should be suppressed or at least accompanied by a warning message.
    5. Now assign the status profile to a document type or an item category, for which status management should be active.
    Based on each status u can allow or restrict the documnets that would want to system to either create, give a warning, or simply ignore.
    Hope it helps you.
    If it does reward points for contribution.
    Regards
    Ravi

  • How to see the DMP schedulings?How to cancel the scheduling?

    Hi,
    Can we see the configured schedulings of a particular DMP or DMP link?I mean schedule was configured for a particular DMP.How to see that configured schedule?If in a BW process chain we can see the schdule in Start variant.And is there any way to cancel the scedule or take out DMP/DMP link from schdule?
    Thanks,
    Manohar

    Hi,
    Follow below steps to see schedule status.
    To cancel -->Click Disable Job from the context menu of selected job with status Ready
    Thanks,
    Raju

  • How to see hidden files in folder, how to see hidden files in folder

    how to see hidden files in folders

    Welcome to Apple Support Communities
    You can't see by default hidden files through Finder. However, you can do it with a command that you can copy in Terminal (in /Applications/Utilities). Open this application and type:
    defaults write com.apple.finder AppleShowAllFiles TRUE && killall Finder
    After doing it, you will be able to see hidden files through Finder in all the volumes connected to the MacBook Pro

  • How to see systems by OEM10g grid

    Hi,
    we have two oracle applications (11.5.9) with their database (9.2.0). I have installed OEM10g , but I can see (and manage) only the databases of the two oracle applications. But not the Web servers and application servers. What more should I do to see them.
    Many thanks before.

    They shouldn't have to enable the Application Server Diagnostic nor the Application Server Configuration packs. Enterprise Manager Grid Control should be able to see the application server targets even if the packs are not turned on, assuming a supported version of the application server is used and the agents are configured properly.
    As for the plug-in, it really just provide very basic monitoring, and it is supposed to work with the layer of software that runs on top of generic application server and database. So, no, one wouldn't see the application server through the Oracle Applications plug-in.
    Chung
    The Application Management Blog - http://blogs.ittoolbox.com/oracle/cwu

  • How does the system know...how to read customore pricing procedure

    Hie Guys, Can you please let me know how the system knows How to ready customer pricing procedure.
    system always reads customer pricing procedure from Sold to  party. can you please let me know if there is any setting for the system to know how to ready the customer pricing procedure. what should be done if we want the system to read it from ship to party?
    thaks!
    Marry.

    Dear,
    Seems like you can get the help of abaper and see at what point system check the different combination for pricing procedure determination.
    If there is any EXIT / Enhancement available at this point, you can write a logic to fetch the customer pricing procedure from the SHIP TO PARTY Master data.
    Thanks & Regards,
    Hegal K Charles

  • How To see flash on iPad 2, How To see flash on iPad 2

    I hace an ipad2 and I would like to see flash without any irregular acción on To my device. Thanks.

    You can't. There is no Flash plugin for iOS devices.
    Adobe could not demonstrate a secure, bug-free, non-battery draining, efficient Flash plugin to Apple so they declined to allow Flash on iOS devices. See: http://www.apple.com/hotnews/thoughts-on-flash/
    Last year Adobe realised Flash on mobile devices is not such a good idea and decided to cease all development of Flash for all mobile devices.

  • Use of user status and business actions

    Hi all,
    I'm new at status profiles, user status and business actions.
    Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
    After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
    Let's say I've a status profile with following user status with according business actions:
    - status: new;   business action: to progress
    - status: in progress;   business action: to confirm
    - status: confirmed;   business action: decline or close
    - status: closed;   business action: close
    What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
    Regards,
    Christian

    Christian;
    If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
    1. Enter a Status Profile.
    2. Assign the status profile to an Object Type.
    3. Define the User Status.
    4. Assign Business Transactions to user statuses.
    5. Translate the status profile and user statuses.
    You can also to use this function to simulate the status development for a particular object.
    To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
    Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
    You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
    The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
    Status profile info
    Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
    The first block contains the permitted object types.
    The second block contains the user statuses.
    The third block contains the following information for each user status:
    which transactions it allows
    which transactions it allows with a warning
    which transactions it disallows.
    I hope help to you
    Regards
    Luciano Nobrega

  • How to get user status in place of system status - B2C

    Hi,
    In our requirement for  B2C webshop, we need to replace the user stattus with the system status . In the standard B2C webshop, , we have only OPEN and COMPLETED orders, which related to system status - OPEN and COMPLETED.
    I want to get user status in place of system status.
    Please  help me how to proceed with the things.
    Regards
    Yaswanth.K

    Done using Custom RFC and jsp modifications!

  • How to change system status of order created in IW31

    Hello All,
    I created a maintenance order in IW31. System status of that Order is like this,
    Now i have a requirement to change the system status.
    But the BAPI : BAPI_ALM_ORDER_MAINTAIN has option to change user status. Please suggest what i have to do?
    Thanks in Advance

    EXIT_SAPLBSVA_001 will fulfill your requirement.
    Try to change your system status inside this exit.
    You will get both User status and System status.

  • How to access system files

    How to see system files in Finder (e.g. the main mail data file) ?

    Not sure what "system files" you mean, but you might find it when you have Finder opened and look in your Menu bar (which starts with the  logo).
    Then you find "Go" to the right.
    1. For the system files -> Click Computer in the list, then Macintosh HD (Or what ever your hard disk is named) and then there is a folder name "System".
    You might also mean that you are trying to find the library, which is located there also.
    2. If it is the library you are seeking, you might need the "User Library" which is hidden by default.
    To get that, open the "Go" menu again and then press and hold the "Option(or alt)" on your keyboard.
    Then "Library" will show up in the middle of the list, and that is your user library.
    I hope I was a bit of help, please do note that these folders contain very important information.
    I strongly advise you to only adjust anything in there, if you perfectly know what you are doing.
    Cheers~

  • How to see revenue posted to a WBS element ?

    Hi
    How to see posting in a WBS element ?
    Kindly provide transaction code or menu path.
    Rajesh

    Hi,
    Menu path is
    SAP Menu - Logistics - PS- Information System - Financials-Revenue and Earnings - Hierarchical Or By Cost Element
    You can see various reports in this.
    Regards,
    Amit

Maybe you are looking for