How to see systems by OEM10g grid

Hi,
we have two oracle applications (11.5.9) with their database (9.2.0). I have installed OEM10g , but I can see (and manage) only the databases of the two oracle applications. But not the Web servers and application servers. What more should I do to see them.
Many thanks before.

They shouldn't have to enable the Application Server Diagnostic nor the Application Server Configuration packs. Enterprise Manager Grid Control should be able to see the application server targets even if the packs are not turned on, assuming a supported version of the application server is used and the agents are configured properly.
As for the plug-in, it really just provide very basic monitoring, and it is supposed to work with the layer of software that runs on top of generic application server and database. So, no, one wouldn't see the application server through the Oracle Applications plug-in.
Chung
The Application Management Blog - http://blogs.ittoolbox.com/oracle/cwu

Similar Messages

How to see system status in spro. How to assign business transaction to user status.

Hi All,
How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
Also share how can we assign business transaction to user status for maintenance order

Peter,
You cannot see the system-status in SPRO.
You can view the system-statuses via BS23.
Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
PeteA

How to access system files

How to see system files in Finder (e.g. the main mail data file) ?

Not sure what "system files" you mean, but you might find it when you have Finder opened and look in your Menu bar (which starts with the  logo).
Then you find "Go" to the right.
1. For the system files -> Click Computer in the list, then Macintosh HD (Or what ever your hard disk is named) and then there is a folder name "System".
You might also mean that you are trying to find the library, which is located there also.
2. If it is the library you are seeking, you might need the "User Library" which is hidden by default.
To get that, open the "Go" menu again and then press and hold the "Option(or alt)" on your keyboard.
Then "Library" will show up in the middle of the list, and that is your user library.
I hope I was a bit of help, please do note that these folders contain very important information.
I strongly advise you to only adjust anything in there, if you perfectly know what you are doing.
Cheers~

Re: How to see transfer structure in sap r/3 system

Hi All,
In generic extraction I have created extract structure ,in the extract structure I have 6 fields but I am trasferring only 4 fields to the BW system ,So it will creates transfer structure in BW System with the 4 fields but when the Transfer structure in sap r/3 generates and how can see the transfer structure in sap r/3 system.I will give full points if i get the correct answer.
Regards,
Venkat

Hi ,
Data source = extract structure in r/3 system + transfer structure in r/3 system + transfer structure in bw system .
for exmpale you try to extract the following fields
1) vbeln
2) erdat
3) ernam
4)netwr
5)waerk from vbak table but you decided to trasfer only 4 fields expect the erdat in that case
extract structure contains all 5 fields and transfer structure contains 4 fields in BW system expect erdat field,
As far as my knowledge is concern when replicate the data source in bw system and activate the infosource at that time
it will create the transfer structure in r/3 system but I dont know how to see the transfer structure in r/3 system,
please help me in this regard.
Regards,
Venkat

Trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
I quote
How to update software on your Apple TV (2nd and 3rd generation)
Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
Update your software
Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
Click Download and Install to start the download process.
Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

How to see if a R3 system is an ASCII system??

Hi all,
I must to do an heterogenoues system copy of an R3 4.6C from:
Source System: Windows-Oracle
to:
Target System: AS400-DB2
I'd like to known if the source system is an ASCII system....how to see it??
I must to see the NLS Parameter in V$parameter of the DB???
Any ideas??
Thanks in advanced

what do you mean by "ascii"? character set?
if yes, log onto system, use <sid>adm and call sqlplus:
> sqlplus /nolog
> connect / as sysdba
> select value from v$parameters where parameter = 'NLS_CHARACTERSET';
GreetZ, AH

How to see all the enterprise services in a Discovery system

Hi,
Please let me know how to see all the enterprise sevices in a discovery system.
Please let me know how to load the enterprise services into webdynpro from discovry system
Thanks and Regards,
Naveen N M

Hello all,
I can't figurate how to list all the root directories
(C:/> , D:/>, E:/> etc.) in a system.
I know how to recursively check the content of a
directory and all its subdirectories when a
predefined path is defined. However what I' d like to
do is actually give the option to pick one of the
root directories to start the iteration. I have been
looking around but I can' really find anything
helpful.
If any of you has any idea on how to achieve the
above objective some clarification would be really
appreciated.
Thanks in advance for your help!How to installing the Javax.comm package

How i get data in matrix grid from A/P Invoice

How i get data in matrix grid from A/P Invoice before click add button

Hi,
Are you trying to read the data in the matrix of a system form? Then you only have to look for the matrix with the ID you can see by visualising the System Information in B1 and then directly read from the matrix cells (using columns element in matrix), the DBDataSources are not filled in until the document has been added to the database.
There are many messages in this forum talking about how to read information in matrix item, just make a search for it.
Hope it helps
Trinidad.

HT3266 HI... I NEED SEE MY ID OF MY COMPUTER.. IS THE UUID HOW I SEE THIS? IS NOT THE IP OR SOMETHING LIKE THAT.. PLEASE I NEED UR HELP PLEASE...

Hi everyone.. the problem is: The server have all the UUID or ID of the computers.... but in windows we know how to see that but in mac we dont have idea to where see this number... so.. i try in terminal with some commands but everytime say the UUID of hardware or UUID of user but i need other UUID and this UUID is the number that the server say that is mine....
Is strange....
In windows we found a program,, but in mac i dont find some program can help my problem... My UUID is the same only show me the UUID of Hardware... i need the 4 UUID of the computers...
Thanks

Ok, Mr. Happy Duck, mouse over to the Apple menu in the top/left corner, select About this Mac. Click on More Info... then on System Report... The Hardware overview should give you all you need.

TS2972 I have finished home sharing for my macbook air and apple tv, now how to see my macbook air on the TV monitor?

how to see my macbook air on the TV monitor after I finished home sharing for the system?

Did you purchase your MacBook Air new? Do you still have its box? Locate its serial number and telephone Apple at the number shown at the bottom of this page (1-800-MY-APPLE if you're in the U.S.). They can help you.

How to see the balance under different balance if special ledgers exist???

Some of the company using special ledgers. I need to teach user how to see the balance under different balance.
I will focus on
1. display voucher
2. check GL balance
Anyone have idea (detailed flow)/template (preferred) on these issues?
Thanks a lot for your help in advance

hi,
/n----
> acccounting -
>financial accounting -
>GL acccounts -
> information system -
> gl reports
here in this path u can get all the gl list and gl balances list ....
u can check what ever reports u want.....
if useful assign points...
regards,
santosh kumar

How to display system property in XML forms

Hi
We are using XML forms template for publishing news in KM. In the show form we got author field (a label in the form) which is mapped to system property createdby (PropertyReference = /Properties/default:createdby).But while displaying the form author is not getting populated. When I try to edit the form in XML forms builder in data model tab under properties node no property is visible. Nothing is shown up in properties even after reload option is selected from context menu of properties node.
I cheked by manually editing PropertyReference to some other property (e.g. modifiedby) but nothing is showing up.
Can you please suggest how the createdby system property can be shown in the xml form?
Thanks & Regards
Sudip

Hi Sudeep,
Please try to open the formbuilder in another machine and try to see the properties xml form design view.
You can even directly can create a lable in show form and add the property name along with the nama space name.
For default properties namspace is default.Create a lable UI element in show form and select the datasource property and add the property value in that.
With we can show file related system generated properties in show form.
Regards,
Rudradev Devulapelli

How to Check System Preference Settings with Time Machine

I just found and fixed a problem caused by a bad System Preference/Universal Access
setting and would like to go back in my Time Machine backup to see where the
error was made. I may have been too quick to blame the 10.5.3 update on the
problem so wanted to look back in time.
The problem is i don't know how to check System Preferences using the Time Machine.
Any suggestion?

If you're looking for specific settings, the short answer is you cannot. You can open the .plist files and try to find the specific option you're looking for, though it might not be too easy to decipher some of the contents of the .plist file. For the most part they're just lists of attributes and settings. For instance, here's a very small chunk of my Finder .plist file:
<key>All Images.cannedSearch</key>
<dict>
     <key>SidebarWidth</key>
     <integer>162</integer>
     <key>ToolbarVisible</key>
     <true/>
     <key>ViewHeight</key>
     <integer>1116</integer>
     <key>ViewStyle</key>
     <string>icnv</string>
     <key>WindowBounds</key>
     <dict>
          <key>bottom</key>
          <integer>1200</integer>
          <key>left</key>
          <integer>56</integer>
          <key>right</key>
          <integer>1920</integer>
          <key>top</key>
          <integer>84</integer>
     </dict>
</dict>
<key>AnimateInfoPanes</key>
<true/>
<key>AnimateSnapToGrid</key>
<string>true</string>
<key>AnimateWindowZoom</key>
<true/>
Each "key" is followed by an attribute, so for instance the "SideBar Width" key is given the "Width" integer attribute of 162. However, some keys have multiple entries, such as the "WindowBounds" key having sub-keys of "bottom", "left", "right", and "top".
These values are finder preferences, though are not accessible via the finder's preference settings. However, buried deep in the Finder's .plist file are some of the user-editable settings:
<key>ShowHardDrivesOnDesktop</key>
<true/>
<key>ShowMountedServersOnDesktop</key>
<true/>
<key>SidebarSearchesSectionDisclosedState</key>
<false/>
If you can find the attribute you're looking for, then that may help you narrow down which version of a .plist file to restore, though not all of them are straightforward legible text. Some have bizarre strings of seemingly random characters that only the application can interpret.
Message was edited by: Topher Kessler

How to see output in GTS for Customs documents

Hi experts,
could you please let me know how to see outputs for customs documents like origin of certificate for US. (ex: like in SD to see order output VA02 then goto issue output)
let me know the Path or Transaction code to see output on system.
Regards
Reddy

Hi
Follow the path:
Customs Processing - Import/Export>Monitoring>Customs Import/Export Declaration>Display Available Customs Export/Import Declaration>Communication Tab
Or try
T-Code: /SAPSLL/CL_CUS_03
Check for Certificate of Origin
Regards
Vivek

Unable to see system variable no in sap b1 due to watch

Dear Sir,
In SAP B1
I am generating report Customer Aging Report.
In PLD Customer Code is displaying buy i am unable to display customer name in PLD because when i am unable to see
system variable number.
The watch cover that variable no. how can i find system variable no.
is there any other method to see system variable no.

Hi,
what you are seeing in system-> status is not the installation number that is the status of your system's SAP License
when you have not installed the license properly after the installation, it shows the status as initial
go to SM51
there you can find the instance number along with the Hostname_SID_InstNumber of your server
thanks and regards
Abdul Hadi

How to see systems by OEM10g grid

Similar Messages

Maybe you are looking for