How to see text history when setting up iPad for first time

I just got this new iPad and synced it but my text history only starts from when I set it up yesterday. How do I pull in all the history?

I think that is not possible :/

Similar Messages

HT1178 I'm setting up airport for first time. I'm getting error no DNS servers help

I'm setting up airport for first time. Getting error no DNS servers. What is DNS server and how do I fix this?

DNS server is that translation from a website address in words meaningful to us.. eg www.google.com to an actual number that computers can use. Without DNS the internet may work but you would have to know the ipv4 address of every site you want to visit.
Whenever you don't know the meaning of a term just type wiki plus the term in google search.
http://en.wikipedia.org/wiki/Domain_Name_System
We cannot really help fix the problem without knowing a good deal more info.
So
What modem do you have.. make and model may be a help?
Who is your ISP.. may be helpful??
Is the modem also a router?
How is the TC connected to the modem?
How is the computer connected to the TC?
A primary example of where you get this problem is a pure cable modem.. ie has no router in it.
When you replace an existing computer or router that is plugged into it, with the TC, requires that you power cycle the modem. In some cases the off time is 5min.. for a lot of services, it needs to be off 20min.. and for some even longer.. maybe an hour or overnight.
But it is not worth getting into specifics without knowing the rest of the system.

How to disable chanllenging questions while user log in for first time

Hi All,
How to disable challenging questions while user log in for first time in OIM 10g and OIM 11g
also i need to know how to change the Oracle logo with custom logo in both versions

In 11G:
To disable challenge questions at start up: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14308/system_props.htm#BABBDCJH (System Property Named: "Force to set question at start up)
To change logo: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm#CHDIFJEJ
In 10G:
Dig the documentation.
A suggestion, please go through the documents first as they have quite a bit of information.
HTH,
BB

Itunes application error when attempting to open for first time. HELP

Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.

You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium

Re transmission bit is set even when packet is transmitting for first time in AP-STA Concurrent testing

Hi ,
Test case scenario : STA-AP Concurrent test case.
1. STAUT interface of CSR-DUT connected to Cisco-AP1252AG and T.P Ref Station Atheros-9462 connected to APUT-CSR.
2. Run Rx traffic between Cisco-AP1252AG to STAUT-CSR and Atheros to APUT-CSR ( i,e TCP Rx/RX ) Simultaneously .
Observations :
1. Re transmission bit is set for packets transmitting for first time -- As seen in sniffer , Please find the attached file -- Retransmission_bit_error_capture for the instance show like wise we have many instance of the issue occurrence .
2. There might be chance where sniffer is missing these packets but at the same time DUT cannot miss and we should be able to see Block ACK from DUT and this is not happening and more over it is happening at many instances also refer the attached sniffer capture -- TCP_rx-rx-25-19Mbps for further investigation on the issue.
Please some one help us to understand / solve the above issue explained.
Thanks,
Jagadeesh

Rather hard to put the pieces together without seeing the entire capture.

How do i get siri to set a reminder for a time other than the appt time. For example: I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

What I can't figure out is how to set a reminder for a time other than the appt time. For example: I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

"Remind me at 10:00 pm on Monday". Siri: "Ok, just tell me what you want to be reminded about". "I have a dentist appointment on 9:00 am on Tuesday". Siri should set it up correctly.

Error when booting app server for first time

Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PM

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

Error when launch MaxDB studio for first time

Dear, Experts
I faced with one issue for launch MaxDB studio for first time.
It reported:
Connect user failed
SAP DBTech JDBC: Cannot connect to jdbc:sapdb://.../.UMDB [Restart required].
Creating default user management failed
Could not create database ".UMDB": [C:\sapdb\clients\DatabaseStudio\pgm\dbmcli.exe] > ERR, -24832, ERR_SHMNOTAVAILABLE ...
Could you please help me on this?
Thank you in advance.
Best Regards

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

How to reset ipod so it sets up like the first time it is used

hi i have an ipod touch 4g and i am wondering how i can reset it so it is just like it was when i took it out of the package for the first time!

See:
iOS: How to back up and restore your content
To restore from iCloud backup:
Go to settings>General>Reset>Erase all content and settings. Then do not connect to computer. Set up the iPod via wifi following the on-screen instructions. You should be offered the option to either set up as new or restore from iCloud backup.
trippc5 wrote:
Yes I tried that but it does not allow me to put the content from my iCloud back on once restored

Setting mailman up for first time, noob

My current web host offers mailman services but I'm about to leave this host so I wish to setup mailman on an extra mac here in the office to keep the list going.
I have installed OS X Server and I'm going through the Mail settings and I feel lost.
Are there tutorials for people to set up OS X Server's Mail service and set up a mailman Mailing List?
I have not yet changed my DNS records for the lists subdomain to point to this mac instead of my web host. I am hoping to get this system all set up for a smooth transition.

Okay, here's my theory on setting up a mail server.
I am assuming you have access for full DNS setup on your domain, you're running OS X Server 10.4, and you have access to configure port forwarding on your local network's gateway/router.
I. Set up your domain:
1. Create an subdomain for your mail server. Make it an A record pointing to your mail server's external IP.
Eg. Host: mail.yourdomain.com IP: 111.222.333.444
2. Make an MX record to handle the domain mail forwarding.
Eg. Host: yourdomain.com Preference: 5 Data: mail.yourdomain.com
II. Set up your gateway
1. On your router or gateway, set it to forward port 25 to your mail server. This will handle mail delivery (server to server).
For mail collection (server to client), you need to decide if you're using POP3 or IMAP. You can set up both if you want to keep your choices open. Forward port 110 for POP3 and 143 for IMAP.
III. Set up your server
From server admin, select your server and go to the Mail service. Click the settings button in the bottom right.
Switch on the check boxes mentioned below:
General Tab:
1. Enable POP/IMAP: Again, you can switch on both to keep your options open. You can choose which to use when you set up your e-mail client.
Use 0 on maximum connection to set an infinate number
2. Enable SMTP, Allow incomming mail.
Domain name: This is yourdomain.com. This tells the mailserver who it is primarily handling e-mail for.
Host name: This is mail.yourdomain.com. This tells the server what it's internet hostname/address is.
Rely Tab:
I leave all these disabled. You can use these settings to control who the server will accept mail from. Read up on them later if you want to set up advanced spam filtering and such, for now we'll just get your mail server running.
Filters Tab:
Scan e-mails for junk mail: This is SpamAssasin. It's reasonably effective at marking spam for your client to pick up, I leave it switched on with the default settings.
Scan e-mail for viruses: Does what it says. I tell my server to delete virus e-mails on sight.
Update the junkmail and virus database: Filters are no good when they're out of date.
Quotas Tab:
Refuse incomming messages bigger than: I set this to 5mb, though I frown on anyone sending an e-mail over 2mb... e-mail isn't really designed for carrying large amounts of data IMO...
Mailing lists Tab:
Seperate feature. Read up on them if you want, they're not required for the mail server to work.
Logging Tab:
Personal choice... I find the Server Admin logs don't tell you much useful information for small servers, so I leave the logging levels on medium levels. If you carry e-mail for many users however, these logs would help you track abusive users.
Advanced Tab:
Security Sub-Tab:
Authentication: This bit's important. I use SMTP Login, since it pretty much works with any client and does it's job. If you have lots of local users, you could use more advanced authentication methods listed. But you MUST have at least one of them, otherwise some spammer will mail-bomb you back to the stone age.
IMAP and POP authentication I leave on Clear, since users need to login to access their mail boxes anyway.
SSL: SSL's a pain for e-mail unless you have a genuinely signed certificate, which I don't. I don't send e-mails with uber sensetive infomation in, so it doesn't bother me. If you use SSL though, feel ffree to set it to use your certificate.
Hosting Sub-Tab:
Local host aliases: This is a list of domains that the server will accept mail for. You MUST have yourdomain.com listed here, otherwise the server will refuse incomming e-mail for it's own users. If you have multiple domains, or you're hosting mail for other people's domains too, list them here so the server accepts e-mail for them. They will need to have their domain MX records set up too for this to work.
Virtual hosting: Another feature. Read up if you use it, I don't personally.
Database Sub-Tab: This is where mail pending delivery and/or collection is stored. Unless you store it on another server or somthing, which only a big mail server, or a back up mail server might need to do, there's no need to change this.
III. Set up your users
1. The server will use the server's local userbase. Add your users with workgroup manager, and be sure to enable their mail access when doing so. Feel free to ask if you need help with this bit.
IV. Set up your client
1. Add a new mail account with the settings for your server. The incoming and outgoing mail server will be mail.yourdomain.com.
You'll need to choose IMAP or POP at this point. If you're not sure which you want to use, do a google and it'll come up with some good comparisons.
EDIT: When setting up your outgoing server, Remember to switch on authentication and put in a username and password, since the server won't deliver mail from unknown users to prevent abuse.
See how you get on with that!

Setting up Gmail for first time?

Hi there,
Im excitedly sorting out all my stuff ready to sync to the iPhone when I buy one tomorrow at the UK release.
I have a question regarding email setup.
I use IMAP Gmail and after watching the video on how to set this up on iPhone, it suggests you do not select the Gmail option when setting up a mail acount, rather you should set up a new IMAP account and enter Gmails settings.
Does this mean I should not sync my Gmail account when I first sync my new iPhone and set it up seperately, or will it automatically create an IMAP Gmail account on my iPhone if I just sync the account from Mail.app?
Thanks

Creation...when you first sync your iPhone, if you have that account selected under the first tab...then it should install the account on your iPhone. Go ahead and try that first. If it does not work then just delete it from the iPhone and build it yourself using other in the mail settings. Do not use the Gmail pre-select for the IMAP build. I had to build mine as it did not work with the sync but it is suppose to.
Hope this helps,
Good Luck

TS3048 Battery jammed inside bluetooth keyboard when trying to change for first time

Battery jammed inside Bluetooth keyboard when changing first time. Help

Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

How do I sync my iPad for first time to iTunes?

I have iPad 2. I had and iPhone 1 and when I try to sync for the first time and try to get updates of apps it wouldn't let me. What do I do?

Hi -
I seem to have the same problem as igmackenzie.
Nothing happens when I plug in the iPad. I need to manually open iTunes, but Devices are empty.
iPad is recognised on my computer as an external device only.
How do I get iTunes to recognise the iPad under 'Devices'?
Suzannemoss

Setting up substitute for first time during unplanned absence

Hi, hope you can help. I've looked through the FAQ / Wiki pages but without luck.
We've had a couple of scenarios lately where users (having never set a workflow substitute) have had unplanned absences, workflow (and notification tasks) are being sent to their workplace awaiting action ... which may not happen for some time.
I want to be able to go in to the user account and set up the substitute, is this possilble? (I am aware this could be a security function - but cannot find this either!)
Thanks

Hi,
Have you tried transaction RMPS_SET_SUBSTITUTE. I am not sure when it was introduced: it was not available in 470 system but exists in ECC6. I haven't used it in productive systems since we are just upgrading but it looks like it might do the trick for you if you are on ECC6.
Regards,
Saku

Slight Color and Quality Shift when viewing RAW files for first time in Library Module.

Hello,
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite.   I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW.   At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR.   I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
I guess what I need to know is a few things and I hope someone can educate this newbie!
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
Thank you for any guidenace you can offer. Of course if you need additional information or clarification please let me know.
Scott

That sort of describes it and may be exactly what is happening. I have a shoot tonight and will pay closer attention to the process and behavior when I import.
It is the full image that I see the shift on though. Its not that the thumbnail and the full size image look different. It the full size image looking one way and then shifting in front of my eyes.
What is frustrating is that I typically find that the image before the shift is better than what appears after the shift, so I find myself always chasing to get back to where it was and because its gone I'm chasing an invisible ideal, so to speak.   Ahhh...isnt that the life of a photographer though!
It seems like its the last step in the render process -- if I could just figure out what it is and stop it I could finally figure out if I really care or not. Its just so quick its tough to tell if indeed the first appearance is better.
I'll feedback some more information when I get a better handle on this.
Thanks for the reference.

How to see text history when setting up iPad for first time

Similar Messages

Maybe you are looking for