How to see the battery usage
how to see the battery usage? my unit is iPod touch 5 generation.
Message was edited by: CatrinaRD_16
CatrinaRD_16
how to see the battery usage? my unit is iPod touch 5 generation.
Message was edited by: CatrinaRD_16
iPod touch, iOS 6.1.1
like Diavonex stated, you could use an app created to check the battery percentage
but remember, google is your best friend =^)
Similar Messages
-
How to increase the battery life of your N series ...
What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
Hope this helps.
Useful links: Phone firmware update | Nokia support site02-May-200701:14 PM
bixby wrote:
no keffa it is a cop out from nokia
its not unfai as its a premium device with a premium price
the n95 battery is atrocious
dont change the post content as the title is 'How to increase the battery life of your N series device'
your talking about nokia phones specifically
the networks are not to blame
they do not make the handsets : Nokia do !!!!!!!!!!
I'm going to choose my words carefully here...
I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
Useful links: Phone firmware update | Nokia support site -
How to reset the military usage value in GTS Business partner
Hello Experts,
Does anyone know how to reset the Military usage value='2' to blank on the Business partner within GTS?
I tried putting a blank there, clicking on the accept entries button followed by saving the Business partner.
It does not seem to work this way.
Does anyone know if it's SAP bug for not having blank as one of the allowable values for the usage except when it's that way while newly created?
The GTS implementation details are as follows:
Any help with regard to this will be much appreciated......
Thanks,
Prashant.Prashant,
As I already informed you, it is not possible to re-set the indicator to <blank>.
From the program code, I can see that the usage indicator is only transferred from the feeder system during the creation of a customer partner. The value in GTS is set either to '1' or '2' during creation, and cannot be changed by any subsequent data transfer from the feeder system.
I think that logic is related to the fact that usage records may be created for multiple Legal Regulations, and those records may then be changed individually by the user in GTS. On that basis, it would not be reasonable to over-write the values by re-transferring the customer from the feeder system.
Regards,
Dave -
accidentally put the ipod touch in the washer. I put in a bag of rice but now it won't charge...I can see the battery icon on the screen and was on charge of over 4 hrs...any suggestions?
If/when it is dry
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 16 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price -
Anyone have any ideas of how to make the battery on the iphone5 last longer?
Anyone have any ideas of how to make the battery on the iphone5 last longer? I don't use the phone that much and the battery does not last all day. Phone is new.
Many suggestions can be found here
1. turn off push email and use fetch or manual fetch instead.
2. turn off or at least limit notifications
3. limit use of apps that use location services (eg. maps app - heavy power useage when running).
4. in General->About->Diagnostics & Usage, turn off Automatic sending.
5. Privacy->Location Services->System Services, disable everything (none of it need be running for normal use).
6. Wifi, turn off "Ask to Join Networks" so your device is not polling all open networks it finds.
7. keep brightness as low as you can get by with.
Finally, get a car charger, and a second charger for work/school and just plug in whenever it is convenient to do so.
Or, if it suits your daily routine better, get an external battery power brick or case and charge it periodically from that. -
MacBook Pro-How long should the battery last?
Hi there i just recently got a MacBook Pro a month ago this is my first laptop and i was wondering how long the batery is ment to last for befroe going flat? my macbook is the most recent 13 inch one and its battery only tends to last 6 or 7 hours before i need to charge it again, just wondering if this is normal?
I have the same MacBook Pro, and "eww" is absolutely right. 6-7 hours is what you will get under normal use. Now if you want to see the battery reach 10 hours, dim the screen to 6% and just do nothing. Just kidding, but you get the point.
-
How to see the Open PO Qty in Mass
Dear Experts,
How to see the Open Qty in PO in mass, is there any report available..Please help
Regards
karthikuse the Txn ME2N
Enter the follwoing details . Scope of list - ALV, Selection parameters- WE101, Plant- XXXX, Enter the document dates From and TO and execute ( F8), You will get all the details, If you want to adjust the format use cntrl+F8 to get the POP_up for selection of fields and use as you wish. -
How to see the balance under different balance if special ledgers exist???
Some of the company using special ledgers. I need to teach user how to see the balance under different balance.
I will focus on
1. display voucher
2. check GL balance
Anyone have idea (detailed flow)/template (preferred) on these issues?
Thanks a lot for your help in advancehi,
/n----
> acccounting -
>financial accounting -
>GL acccounts -
> information system -
> gl reports
here in this path u can get all the gl list and gl balances list ....
u can check what ever reports u want.....
if useful assign points...
regards,
santosh kumar -
How to see the print preview of outgoing excise invoice.
Hi Experts,
How to see the print preview of outgoing excise invoice.
Thanks,
srinivas.Dear Sreeni,
Just go to J1IIN, click on "Exc.inv for delivery -- Display" where you input delivery reference and execute. If you have generated excise invoice, you can see the corresponding excise invoice for that delivery / billing document.
Preethi. -
How to see the object while moving on the artboard?
hello everyone;
maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.What have they gone and messed up now?
When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
If what Bedri says is right, they’ve gone and mended something that wasn’t busted. -
How to see the ouput of a purchase order on screen??
Hi all , how to see the output of a purchase order (ME23) on screen?
Points will be awarded!!!!
Thanks & Regards
JohnHi,
If any output tye is associated to PO and it is been triggered then User ME9F tocde to view the output.
To check thise first Use: ME23 and click on Messages, if any outputs are triggered and they are in Yellow status then Use ME9f. Once you execute you will get Outputs in the screen, then choose the output and click on Display Message button. Your output will be displayed on the screen.
Regards,
Ashok -
Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!
I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
Any other ideas?
Come on, people.
Thanks,
Doug -
How to see the change logs for billing document
Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjanhello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards. -
hi every body...
i want to get the result of any table..
for ex: select * from dept;
the o/p should be like(10~Accounts~new york)
for this i wrote this code.... it run sucessfully;
my prob is how to see the Result..
declare
tn varchar2(35);
sqlstmt varchar2(2000);
rc sys_refcursor;
begin
tn := '&tn';
sqlstmt := 'select * from '||tn;
open rc for sqlstmt;
end;
post u r comments,Hints and suggestion...post u r comments,Hints and suggestion...
SQL> var rc refcursor
SQL> begin
2 open :rc for 'select * from &tn';
3 end;
4 /
Enter value for tn: emp
old 2: open :rc for 'select * from &tn';
new 2: open :rc for 'select * from emp';
PL/SQL procedure successfully completed.
SQL> print rc
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SPENCER CLERK 7902 17-DEC-80 800 20
7499 VERREYNNE SALESMAN 7698 20-FEB-81 1600 300 30
7521 VAN WIJK SALESMAN 7698 22-FEB-81 1250 500 30
7566 MAINGUY MANAGER 7839 02-APR-81 2975 20
7654 KISHORE SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BARRY MANAGER 7839 01-MAY-81 2850 30
7782 BOEHMER MANAGER 7839 09-JUN-81 2695 10
7788 PADFIELD ANALYST 7566 09-DEC-82 3000 20
7839 SCHNEIDER PRESIDENT 17-NOV-81 5500 10
7844 GASPAROTTO SALESMAN 7698 08-SEP-81 1500 0 30
7876 CAVE CLERK 7788 12-JAN-83 1100 20
7900 CLARKE CLERK 7698 03-DEC-81 950 30
7902 JAFFAR ANALYST 7566 03-DEC-81 3000 20
7934 ROBERTSON CLERK 7782 23-JAN-82 1430 10
109 JOMAR 30
8800 VISWARAYAR INTERN 7934 03-OCT-82 0 10
16 rows selected.
SQL> Cheers, APC
Blog : http://radiofreetooting.blogspot.com/ -
How to see the list of purchase order
hi,
Please kindly guide me how to see the list of purchase order released and unreleased both.
Regards,
SanchitaHi
Check it out in Tcode ME2N
Menu bar - Edit -Dynamic selections - Purchasing document header - Release status.
Check it out.
Thanks
Raman
Maybe you are looking for
-
"The iPod cannot be updated. An unkown error occured. (-36)"
Hi, can someone help me with this? I've been browsing troubleshooter and topics for days and yet I can't figure out how to fix this one. This occured when I've got my computer reformatted and installed a new iTunes. I can't put anything on my iPod sh
-
i drop my phone so i got a new one and back up everything... well now i have pics on my phone that i dont want and i cant delete them please help i tired hooking up to iTunes but still cant delete certain ones.... i can send them or post but nothing
-
Multitouch trackpad double tap not working ????
yesterday i was having oily food nd by mistake oil get on to the trackpad nd then my laptop went crazy, mouse started moving itself !!!!!!! after few min.i cleaned it with wet tissue paper nd afterwards every thing was fine rtoday i noticed that d
-
How to change Tray selection in the middle of overflowing sections
We have situation where we have a form and the first page, an invoice, prints on perf paper, tray 1. The second page consist of repeating sections and needs to start on the back side of the perf paper, but when it ejects to a new page due to overlow
-
No option for headphones on system preferences
I am new to mac and I cannot find how to change sound output to headphones. I have reviewed system preferences and the only option showing is 'internal speakers'.