How to see the change logs for billing document
Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan
hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.
Similar Messages
-
How to see the changes made for iPad in iTunes on my iPad?
How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?
Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-) -
How to see the changed output for purchase order
Hi..
I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
Edited by: Meena 303 on May 1, 2008 6:24 PMHi
In ME22N go to message -
> select old message -
>click change OutPut button -
> Save
then see print priview through ME9F or ME22N it sself.
regards
Sachin -
How to see the Container log for debugging in netbeans 4.1
Hi All
I am using the netbeans 4.1 with sun applicaion server 81. as my applicaion server. I have developed one ejb module and deployed it in server. Now I want to see the EJB container log for knowing how my beans methods are being called at the time of execution. Can any one please help me on this.
Thanks
Ranjan Rashmi Sahoo.
Mphasis BFL Ltd, Bangalore.
IndiaCould you tell me how to see the logger?Search for Log4J. It has a good documentation IMO.
-
How to trace the change log for a program ? both local and release versions.
Hi experts,
I encounter a very strange problem.
I changed a program, created a new version TR, , there are three versions before my version which are all have been released.
but there is one sentence which is not added by me, could anyone tell me how to find the reason why the sentence in my version.
Any help would be apprecite!
BR,
SummerHi,
Not all the 3 TRs
Goto SE03, Click on Find Requests under Requests/Tasks section.
Give all the 3 requests names in Requests/Tasks, Give User name as *
See any sub tasks are there in the above requests by double clicking on each request.
Or
Goto SE03
Click on Search for Objects in Requests/Tasks under Objects in Requests
Select the first entry R3TR PROG give the program name.
In below Request/Task Selection , check the status Released.
See what all Requests are displayed, who are all the persons who changed them.
Thanks & Regards
Bala Krishna -
Confition type FRC1- how to get the change log,
Hi,
When the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,Check in
m/06
go to utilities
change log
If not found consult BASIS consultant -
How to check and delete the change logs for DSO
Hello All,
I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
Thanks,
MHi
Check out the below two articles
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh -
How to use the change log in ODS to track Delta change?
People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
ThanksKevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat -
How to see the changes made in tx code MN05
Hi all,
Do you know how can I see the changes made in tx code MN05?
I need to know when was The output condition updated? Do you have a change record on this change?
Thanks and regardsHi,
There is a Transaction code SCU3 to display the change logs
Goto the Transaction code and enter the Table for MN05 and execute, it will display all the logs for MN05.
If you didnt find any change logs here, then you have to activate the Change logs for this table.
To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
Check whether it was activated or not, if not activate it.
Thanks,
santosh -
Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks aheadHi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards, -
I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
Please help:
1. Where is "the setup log"?
2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
3. How can I uninstall CS4 if I can't even get to the installation window?
4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work. -
How to see the group membership for a user in oidadmin
how to see the group membership for a user in oidadmin?
I see the memberships in oiddas, but I would like to know if its possible to see them in oidadmin? Thanks.Hi,
For what I understand, you know the user and want to know the groups that the user is member of (am i wrong?)...
With this query you pass the user's DN to the ldapsearch and the search gives you back the list of groups the member is a member of, all you need to do is change the value "uniquemember=cn=orcladmin" in the query for your own user.
For example:
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=orcladmin" dn
will give you the list of groups that the user "cn=orcladmin" is a member of.
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" dn
will grive you all the groups that the user smithj is a member of.
if you don't want to get the DN of the group you can change the last parameter of the query like this
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" cn
will give you the CN of the groups the user is member of.
let me know if this is what you need.
Regards,
Juan -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
Critical Errors Were Found in Setup. Please see the Setup Logs for Details
Hello everyone. I have recently gotten Adobe Flash CS4 and i was really happy, until i kept getting the same error whenever i tried to install:
"Critical Errors Were Found in Setup. Please see the Setup Logs for Details"
I do not know what is the cause of the problem, but i have installed Adobe Photoshop CS3 succesfully without any problems. Please do help. I checked the setup logs, but i have no clue what it is saying, and its too long to post here.
Thank you for your time and help.We've all been there with the frustration.
And I'd really like to see you get back up and running. I'm a bit of an insomniac and tend to go back over the day while I'm pretending to sleep, and a couple of new things filtered back into my mind. There have been, I think, some problems reported about conflicts with some scanner drivers, and of course with firewalls, anti-virus programs, and the like. I think iTunes and instant messengers are also on that list.
Make sure you turn off everything non-essential before trying to do your installation (and I'd probably do the same thing before running the scripts again). I do this by running MSConfig on XP and going to the startup tab. I uncheck everything I can't identify as being essential (which means I pretty much only leave the mouse driver checked. You may need to google some of the stuff to find out what it is) and then go to the services tab and hide all Microsoft services. From what's left I again uncheck everything that isn't required to run the system. Bonjour, if you see it, should be left active as it is used by the CS3 installer. Restart the computer.
This should have turned off pretty much everything that could have been conflicting with the installer. Go to windows security center and make sure the windows firewall is also temporarily turned off, if you use it, and you should be ready to go. It can't hurt to try the add/remove programs again, but it probably won't show any adobe products anymore if you've run the scripts correctly (did you also run the MSI cleanup utility?).
After you've finished, you can run MSConfig again and reset to standard startup.
Peter
Maybe you are looking for
-
Extract Month & Year From Date
Hi All, I have a key figure quantity and i want the data on date,for the month and for the year. i create the variables for the date,for the month(ie from date to date) and for the year(ie, from date to date) seperatly that means i have three input v
-
Print of GR without material no and with Account assignement K / Q
Dear Freinds, I want make Print out of Material Document with Material text (without Material code with account assignement K or Q Project). I made out put setting for WE03, Transaction event type WE Print version 3 and Print Item 1, Material docume
-
Dear All, I have change the purchase prices for the some material. The price change succeeded, but the all effective prices were revised to 1/100 of the old prices. The effective price field does not allow the manual input. Please provide me the solu
-
Hi all Please guide me and put step by step config steps of trip vise freight calculation. Best Regards Parveen Kr. Thakur
-
How to transfer contacts to car bluetooth kit
I did search and could not find. If there is thread already I apologize. I am trying to transfer contacts from N900 to Pioneer AVIC-X910BT car unit. Paired Ok but could not transfer phonebook. I tried to select from phone to send data via bluetoo