How to see the changes made for iPad in iTunes on my iPad?

How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-)

Similar Messages

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • How to see the changed output for purchase order

    Hi..
    I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
    Edited by: Meena 303 on May 1, 2008 6:24 PM

    Hi
      In ME22N go to message -
    > select old message -
    >click change OutPut button -
    > Save
    then see print priview  through ME9F or ME22N it sself.
    regards
    Sachin

  • How to stop the changes made for the BP in CRM not to update in R/3

    Hello Gurus''
    we are in need of help......i have an issue...the issue is
    Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
    Where as in our case the data is updateing in R/3
    Here by requesting you all to help me out how to stop the updaation of some changes  which are made in CRM , that should not be in R/3
    Point will be given......
    Regards
    sreeram Raghu

    Hello
    Thanks for ur reply.........
    We have the following business process
    We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame  customer is replicated in R/3 fro sales.
    What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
    can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
    >publication>All BP(MESG)->Replication object-->Bupa_Main
    >Sites-->SQ1_300
    If we do this process does the issue will fix or else we need to do soem thing more...
    Thanks in advance
    Regards
    Sreeram Raghu
    +91-99 94 94 82 72

  • How to know the changes made to Quotations & Sales orders?

    Hi all
    I want to know how we can have the records of changes and alterations that are made in quotations and Sales orders. For example, once the quotation is created and saved, there must have been many alterations either on pricing or in terms & conditions based on the final negotiations with the customer. Please let me know how do we record the changes.

    Hi,
    what ashish told is exactly correct.You just go to the Environment-changes and execute,it will shows all the changes made for that order like pricing,payment terms etc.
    Regards,
    Hari.

  • How to see the material document for Blocked stock

    Hello Experts
    I having some blocked stock in plant X , How to see the material document for this stock.
    Thanks in Advance
    Prashanth.v
    Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PM

    which material documents do you want to see?
    Material documents can be found and displayed in MB51 transaction.
    in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
    block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
    if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa.

  • How to see the group membership for a user in oidadmin

    how to see the group membership for a user in oidadmin?
    I see the memberships in oiddas, but I would like to know if its possible to see them in oidadmin? Thanks.

    Hi,
    For what I understand, you know the user and want to know the groups that the user is member of (am i wrong?)...
    With this query you pass the user's DN to the ldapsearch and the search gives you back the list of groups the member is a member of, all you need to do is change the value "uniquemember=cn=orcladmin" in the query for your own user.
    For example:
    $ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=orcladmin" dn
    will give you the list of groups that the user "cn=orcladmin" is a member of.
    $ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" dn
    will grive you all the groups that the user smithj is a member of.
    if you don't want to get the DN of the group you can change the last parameter of the query like this
    $ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" cn
    will give you the CN of the groups the user is member of.
    let me know if this is what you need.
    Regards,
    Juan

  • I'm burning cd's to itunes on my PC and can't see the albums I've burned in itunes on my ipad or iphone, why?

    I'm burning cd's to itunes on my PC and can't see the albums I've burned in itunes on my ipad or iphone, why?

    I can see a extremely slow download of one at a time of the remaining songs.  Very disappointed in iTunes, should not take 24 hours to retrieve songs!!!

  • How do I see the changes made in the settlement rule?

    Dear Experts,
    I would like to see the changes that was done in the settlement rule. I have perform the following:
    In the 'maintain settlement rule' screen in project builder (CJ20N) - Goto > Change Document > All Rules.
    The system gives message that 'no change documents found - message no KD128'.
    Q: Is there any difference between settlement rule and distribution rule?
    Q: Is there anywhere else that I need to do to get the change document in settlement rule or distribution rule?
    FYI - I have change the project profiles to include(tick) change document in the Basic Data and Status Management. I believe this is not relevant to change in settlement rule.
    I appreciate your help. Thanks.
    Regards

    Hi,
    Abt your first question,
    You need a settlement rule to carry out settlement. You define the settlement rule in the sender object. The settlement rule contains the distribution rules and the settlement parameters for a sender object.
    You can maintain the settlement rule for WBS elements or networks/activities in an overview screen. You use distribution rules to stipulate which proportions of the costs are to be settled to which receiver. Costs can be distributed on the basis of:
    1. Percentages
    2. Equivalence numbers
    3. Fixed amounts
    To check changes done , you can also check t code CN60.
    Regards
    Tushar

  • Swing .............how to undo the changes made by user

    Hi,
    i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
    now i have placed two buttons there.
    one is Apply and second is Cancel.
    when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
    can anybody help me how this can be done and what code should i write in action performed method
    thanks in advance
    plz reply

    thanx.
    one more thing
    In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
    1) Now how can i restrict user to create one more internal frame unless first one is closed.
    2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
    3) and how can pass those parameters value to my main frame from where i m calling internal frame
    Plz reply
    Edited by: neel007 on Mar 11, 2009 8:02 PM

  • How to find the changes made in spro configuration?

    Dear Friends,
    From my client side, some configuration changes were happened directly to production client not by the consultants. How to trace this that what changes have been made through log or table. We found that in spro->utilities->change log is in switched off mode. We came to know that through this log we can find the changes happened or not. Is it so? or is there any other solution to trace it?
    Please advise.
    thanks & regards
    sankar.

    thanks friends for your prompt replies.
    But, as i said clear, the changes made to production client directly and not by any request. How can we detect who has changed the log settings.
    ****Default account assignment configuration was changed.
    Please advise.
    thanks & regards
    Sankar.

  • How to Track the changes made to the custom table field value

    I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
    Thanks & Regards,
    Kranti

    Hi Satya,
    These are the steps you've to do.
    1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
    2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
    3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
    4. You can keep track of the changes made to the table by monitoring these tables.
    Regards
    Anil Madhavan

  • How to see the changes from format dropdown in RTE itself?

    Hi
       I have a RTE . I have enabled paraformat and is trying to add tags. But i am not able to see the changes in my RTE. How can i achieve this
    even if we select heading1 , the selected text should appear in H1 tag. But it is not happening. Can i know why it is so???
    Thanks
    Veena

    Hi Veena,
    Looking at snapshot I see paragraph is missing might be some customization done.
    As a sanity check download Enable-all-RTE-features-*.zip from package manager & verify.
    Thanks,
    Sham

  • How to see the Container log for debugging in netbeans 4.1

    Hi All
    I am using the netbeans 4.1 with sun applicaion server 81. as my applicaion server. I have developed one ejb module and deployed it in server. Now I want to see the EJB container log for knowing how my beans methods are being called at the time of execution. Can any one please help me on this.
    Thanks
    Ranjan Rashmi Sahoo.
    Mphasis BFL Ltd, Bangalore.
    India

    Could you tell me how to see the logger?Search for Log4J. It has a good documentation IMO.

Maybe you are looking for

  • After choosing a jpg for upload, the "Upload File" button on the organization's receiving site of does not respond. The second problem: it's impossible to highlight more that one file at a time.

    Clicking the first file, holding down shift and clicking the last file doesn't work. I've tried all manner of command, control, shift combos without success.  This one-at-a-time attachment problem also happens in web mail.  Are these two issues relat

  • Outlook -- Ical

    I recently bought my first mac for home use - a MacBook Air. I use MS Office 2007 at work on my PC, and would like my outlook calendar to transfer to my Mac. I have searched and searched online and in help files to figure out how to do this. It seems

  • Help with refreshing applet

    If I recompile my applet and try to restart it in Netscape the changes do not take hold. I've tried refreshing and emptying the cache and even setting the cache to 0, but it won't run the new version of the program. The only way I can get it to work

  • Hiding Applet Window

    Hi there! I need help on hiding applet window. I have tried using hide() method but the compiler gives deprecated warnings and ask me to refer to documentation but I dont know how to use it. Does anyone knows how to hide/minimise or whatever so that

  • Bad Parameter - Extract pages Acrobat XI

    Had to purchase Acrobat XI on new computer.  DO NOT LIKE IT AT ALL!!!!!  Loved Acrobat 9 format and it was very user friendly.  Not the case at all for Acrobat XI.  Wasting time trying to perform editing and now can't extract pages from file.  How do