How to see the complete list of files linked to the file deleting?

When in Dreamweaver, if you click to delete a file, a dialog box opens that tells you how many files ahve links to the files you are deleting. It gives a partial list, ending with <more...>; however, you cannot click the word more. How do you get a complete list?

Hello ArunavA,
How r u ?
I dont think we can see the complete history of the changes recorded for InfoObject, only the last changed by can be identified.
GOTO -> Overview List
see at the last these details will be available
Best Regards....
Sankar Kumar

Similar Messages

  • Where can I see a complete list of the apps I bought?

    When I access my Mac account I can see a complete list of all the software I downloaded.
    Is there a place where I can find a complete list of all the apps I bought?
    Regards

    Itunes, Store>View my Account> In the middle, "purchase history".

  • How do I get my reminders to move to the completed list?

    I can create reminders, but they do not show up in the completed list after the time that they remind me. Do I have to do something special to them?

    Hi Ned,
    Thank you for your help. Your 2nd solution led me straight to the correct solution which is:
    slider_1._x = this._xmouse + groove_1._x;
    I use the object variable this instead of groove_1 as I am calling it from the function:
    groove_1.onMouseDown = function(){
        slider_1._x = this._xmouse + groove_1._x;;
    I also add the groove_1 left hand offset (groove_1._x;)
    Thanks again for you help.

  • I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a complete erase and clean up of the iMac?

    I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a completely erase and clean up of the iMac?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with a visit to: OS X Maintenance - MacAttorney.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Data Backup
      3. Deja Vu
      4. SuperDuper!
      5. SyncTwoFolders
      6. Synk Pro
      7. Synk Standard
      8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • When bookmarking a page, I can't get the complete list of bookmark folders to dropdown in order to select any folder in which to bookmark page. What do you set to get whole list of folders in Bookmarks to drop down?

    When bookmarking a page, I can't get the complete list of bookmark folders to drop down in order to select any folder in which to bookmark page. The 'Folder:' bar has 'Bookmarks Menu' showing. The arrow on the bar drops down 5 recent folders to which pages have been saved, but the pop down arrow to the right of the bar just opens to show the three categories and 'New Folder' button. What do you set to get whole list of folders in Bookmarks to drop down?

    To all, embarrassingly enough, I have discovered that I didn't know how to expand the three categories including 'Bookmarks Menu' in the 'Bookmark This Page' pop up interface. It was expanded by default on the initial Firefox opening and first page bookmark attempt. Next use it only showed categories. I clicked and double clicked the 'Bookmarks Menu' line, but failed to see the small, shaded triangle used to expand/collapse list. If it appears collapsed, just tap triangle at left of line to see all folders. It seems to open the same way after I do it for first time. Sorry for the inconvenience, and thanks for all the attempts to help.

  • In OS 10.7.5, how do I get a listing of folders similar to the "directory tree" that I used to have when I was suffering through MS-DOS?

    In OS 10.7.5, how do I get a listing of folders similar to the "directory tree" that I used to have when I was suffering through MS-DOS?

    I'm not quite sure what it is you are looking for, but there are a three different ways to view the files and folder in a directory in Finder - Icon view, List view, or Column view - or you can use Terminal and use the various options for the ls UNIX command for listing a directory. For those options, see:
    https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ls.1.html
    Hope this helps.
    Regards.

  • How to see my play list on Windows when I created it on Apple ?

    How to see my play list on Windows when I created it on Mac OS X ?

    View > Show Sidebar form the top menu
    Then your phone and playlists are on the left.
    Drag your playlist up to phone and it will copy it

  • How can I get a list of active savepoints for the current session?

    Hi,
    In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
    "Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"
    So how can I get a list of active savepoints for the current session?
    Could you please also let me know if there is any better way to debug this issue.
    Appreciate any quick response as the issue is very critical.
    Thanks,
    Soma

    user776523 wrote:
    Hi,
    In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
    "Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"It sounds like there's an execution path in the code where the SAVEPOINT is never issued.
    There is no way to get a list of active savepoints. Is this your code or a "canned" procedure? If it is your code you can go through the code looking for answers, possibly tracing execution using DBMS_OUTPUT.PUT_LINE or writing messages to a log table. If its a "canned" procedure you may need to open an SR with Oracle

  • How to transfer a contact list from a cd to the Iphone 4S

    How to transfer a contact list from a CD to the Iphone 4S?

    Import them from the CD to a supported contact application on your computer, then sync them to your phone.

  • How to see all users who are allowed permissions for the specified entity ?

    How to see all users who are allowed permissions for the specified entity ? 
    And change user permissions for the current entity
    from Moscow with money

    Vincent,
    ... and how to change entity permissions for some users?
    from Moscow with money

  • How to make a select list editable or searchable like the combobox

    Does anybody know, How to make a select list editable or searchable like the combobox? Do we need a plugin here, where I can get it.

    Hi Nilesh,
    If this is what you are looking for http://apex.oracle.com/pls/apex/f?p=32395:3:1202144397644679
    get the combobox plug-in
    http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/searchable-combobox.html
    I have not tried this though. Found it while searching for some other plug-ins.
    Regards,
    -Senthil

  • Please provide the complete list of AASP (Thiland)

    please kindly provide the complete list of AASP (Thailand) to me .I need that information to plublish in my blog to everyonce whose interesting. Thank you very much
    <Email Edited by Host>

    Thank you for your suggest, I've already try to find at https://locate.apple.com/th/en/ but it show  by city. We've 77 city in Thailand I need all list of AASP in Thailand including address, contact, location. if you can provide that to me I will appreciate. Thank you very much

  • The files/project listed below are linked to the open projects may require exporting

    Guys, I'm having this error "$ not a valid integer".
    I have five modules..all in .exe format. 3 of these modules are working fine with the links, 2 modules are not..
    I have 1 .exe as a menu, when I publish this slied..it would say "the files/project listed below are linked to the open projects may require exporting"
    3  modules are having this
    [title.htm,title.swf or title.exe}
    and the remaining 2 are having the full address of the file "c:\documents and settings\ so on and so on"
    what can't be like the 3 modules? I used the same procedure, what could be the problem?

    oopps..this is ok already..done with the updates. thanks

  • How to remove bullets and spacing for url links in the Related Links iview?

    I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
    All I need is to remove the bullets and increase some vertical spacing between the links.
    Currently, it looks like this:
    URL iView A
    URL Iview B
    I go through the whole section of Related Links properties, none of them seems to do what I want.
    Here are the list of properties in Related Link section (of Navigation Panel):
    Link Color
    Text Decoration of Link
    Hover Color
    Text Decoration of Hovered Link
    Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
    Thanks for advice.
    Kent
    Post with Diagram Illustration:
    <a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
    Message was edited by: Kent C.

    Hi, Kai.
    I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
    For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
    If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
    Thanks for help.
    Kent

  • How to create multiple price lists in indesign linking via ODBC/ SQL

    Hello,
    I'm hoping someone can help me as I am really not sure where to begin! We stock over 3000 product lines and have 2000+ customers who all have bespoke prices, all of this information is stored on our system. I am trying to find out if it is possible to create a price list that links to this information so that we can create bespoke price lists for each customer. We currently use excel but would like a more professional look to our price lists and to include product images etc. Whilst the price list product content will be the same for all customers we will need to periodically need to add new products to this price list. I anyone able to point us in the right direction for a solution to this?
    Many thanks
    Jen

    Hi Peter,
    Yes I think that this is the way we will be probably go but not sure what the correct terms are for what I am looking for. Not sure if you are allowed to post examples of specific commercial plug ins here but if not, what should I search for. I know if sounds daft but it's a real case of not knowing what it is I am looking for. I am a complete InDesign newcomer who uses it at the moment for simple flyers etc so more than happy to find someone who can do the more complex stuff for me. The price lists will need to be done inhouse and on a regular basis.
    thanks
    Jen

  • How to export 2 different report with a link at the same time

    Hi,
    Do anybody know how to export 2 different report with a link at the same time. I currently create a report which link to another report. But when I want to export the 1st report I also want the 2nd report also be exported.
    Thank you very much.
    Best Rgds,
    SL Voon

    Export all the three components individually.
    It will generate 3 script files. Now run them from SQL>
    null

Maybe you are looking for