How to see the DMP schedulings?How to cancel the scheduling?

Hi,
Can we see the configured schedulings of a particular DMP or DMP link?I mean schedule was configured for a particular DMP.How to see that configured schedule?If in a BW process chain we can see the schdule in Start variant.And is there any way to cancel the scedule or take out DMP/DMP link from schdule?
Thanks,
Manohar

Hi,
Follow below steps to see schedule status.
To cancel -->Click Disable Job from the context menu of selected job with status Ready
Thanks,
Raju

Similar Messages

How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash?

How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash? My platform of DMS is 5.2.2

Hi Temur, ok. I do the above procedure and it worked fine
Now, I have other question?
How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
Subir al directorio superior.
Nombre Tamaño Última modificación
Sample Videos.lnk
1 KB
17/06/2011
06:25:00 a.m.
deployment
29/06/2010
04:14:00 a.m.
lost+found
25/02/2010
12:00:00 a.m.
video futbol en la playa.mp4
1390 KB
29/06/2010
01:08:00 a.m.
videofutbol.mp4
1390 KB
29/06/2010
01:38:00 a.m.
I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
I appreciate your early response.
Thanks

I went to apple store sat 2.4 and was told that to get verizon not to charge me for the next cycle i should cancel the service .i lost my data that i pais

i went to apple store sat 2.4 and was told that to get verizon not to charge me for the next cycle i should cancel the service .i lost my data that i paid for on 2.1.how do i restore my service that i paid for

Go back to the store and discuss this with the person that gave you the advice.

I started a download in app store and confirmed the billing information. if i cancel the download will i still pay for it?

i started a download in app store and confirmed the billing information. if i cancel the download will i still pay for it?

See this App Store Apple note: http://support.apple.com/kb/TS3624 and http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=Mac%2 0App%20Store%20Account%20and%20Billing

How to see a stream of a signal in the Data View while monitoring a signal.

Hi!
I'm migrating from an older data acquisition software for SignalExpress. With the DAQ old had a way to monitor the signal so that the software screen I saw on the timeline and as I increased or diminished the scale of the X axis (time), I saw more or less signal transitions in screen, respectively. For example, if the time scale (x axis) was set to 5 seconds and the signal that I was monitoring commute every 1 second, I would see on the screen of the software 5 sequential pulses.
I am not able to configure my data acquisition that way. What I have noticed is that the scale of the X axis is limited to the value of the "Samples to read." With that, I see the sign on the software screen is instantaneous and not a sequence of pulses.
I intend to monitor the signals are random signals originating from idependentes and switching relays.
In summary, I believe that the solution to what I want to do is increase the scale of the axis X. How to do this?
I use SignalExpress 2011, USB-6363 DAQ step and Digital Line Input.
Thank you.

OKors,
First, sorry for the delay in responding to you. And second, thanks for your reply.
I will try your suggestion: continuously scrolling "strip chart".
To try to clarify, what I want is to merge than I can with Digital Graph - signs lined up vertically with the display type Chart, where it can act on the parameters of History Lengh, as you suggested, to achieve "curb" the transition graph .
If using the first solution, Digital Graph, the screen transitions are very fast. On the other hand, if using the graph chart type for digital signals, they overlaps, since all have the same value - 0 or 1.
The idea is that these two characteristics in a single graph (Data View). I believe something to be simple, but I'm having trouble mounting this setting.
That's it. Any news ... I'll post here.

How to See logs for custom programs from without the logviewer in NWA

Hello Experts,
The JavaAS developers want to see the logs for their custom programs from without the logviewer in NWA.
Do you have any experience or know of any reference materials to instruct them on where to write their logs, and how to configure NWA to see them?
Thanks
Jibin.

Hello Jibin,
Your developers should familiarize themselves with the Logging Framework of the J2EE Engine.
Here is the guide:
http://help.sap.com/saphelp_nw04/helpdata/EN/a2/15ab41d60bcb46e10000000a155106/frameset.htm
If they use the Logging Framework you would be able to access the logs through NWA.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA)

How to see when ipod was last synced from the pc

I think my iPod is either lost/stolen and the only way to find out for sure is to see when my iPod was last synced on my computer. how do you find out the time that this happened?

Welcome to the discussions,
every time you sync a backup is created. You can find the list of stored backups in iTunes/Settings/Devices. Hover over the name of the device and you'll see the serial number of the device and right next to the backup the date it took place.
But you can't find out if your ipod has been synced on another computer using your PC.
Message was edited by: Ingo2711

How to see if Option 43 is working for the AP

I have configured my dhcp server to provide the WLC IP address to the APs over the option 43, but the AP is not joining to the controller.
I just wanted to check in the AP to see if it's looking for the right controller IP to be sure it was able to get it correclty from DHCP.
I tried to find some console line command to do that but i couldn't find.
the "show lwapp ip..." shows only the manyally configured informations, I would like some command that would say "I'm looking for this controller" is there anyone?

Hi
Connect to LAP and see what is gong on. I will provide you two outputs from LAP. One with improper DHCP option set and one with good.
First:
Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version 12.4(10b)JA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 30-Jan-08 12:11 by prod_rel_team
*Mar 1 00:00:07.939: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:08.939: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
ap>
ap>
ap>
ap>
*Mar 1 00:00:26.983: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:27.135: Logging LWAPP message to 255.255.255.255.
~
%DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.0.0.5, mask 255.255.255.0, hostname AP
%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Did not get any DNS options from DHCP. <<<<<<<<<<<<<<<============== IMPROPPER DHCP OPTION SET
%SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
%LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
Second:
*Mar 1 00:00:09.831: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1250 Software (C1250-K9W8-M), Version 12.4(16b)JA, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Mon 07-Jul-08 18:19 by prod_rel_team
*Mar 1 00:00:09.831: %SNMP-5-COLDSTART: SNMP agent on host AP is undergoing a cold start
*Mar 1 00:00:10.871: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:10.875: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:11.199: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:12.343: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:28.443: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.447: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:28.451: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
*Mar 1 00:00:28.611: Logging LWAPP message to 255.255.255.255.
%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
%LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
%SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
%DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.0.0.22, mask 255.255.255.0, hostname AP
Translating "CISCO-LWAPP-CONTROLLER"...domain server (xxx.xx.64.2)
%LWAPP-3-CLIENTEVENTLOG: Controller address xxx.xx.65.130 obtained through DHCP
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
%LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLEREncoding the APType as 0
Encoding the RSSI threshhold as 0
Encoding the APType as 0
Encoding the RSSI threshhold as 0
%LWAPP-5-CHANGED: LWAPP changed state to JOIN
%LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
%LWAPP-5-CHANGED: LWAPP changed state to CFG
%LWAPP-5-CHANGED: LWAPP changed state to DOWN
%LWAPP-5-CHANGED: LWAPP changed state to UP
%LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
%LWAPP-3-CLIENTEVENTLOG: AP has joined controller WLC_1
Hope this help
Regards
Greg

How is 'See Reply' button supposed to work? (The arrow thingy)

I'm curious what this button is supposed to do. It's been flakey in the past (tiger) but now seems to be functioning again with Leopard. However, it is not doing what I'd expect. Questions :
1/ If you reply more than once, to an email, what should this button do?
2/ If you forward and email, what should it do?
Any insights would be welcome, since I can't trust it's behaviour for my own testing.

To be clear: the circular arrow is to show that an email has been replied to, the straight arrow from left to right is to show that an email has been forwarded.
When clicking on a circular arrow - and assuming the reply has not been deleted - the email you sent as a reply will pop up.
If you reply more than once to the same email, clicking on the circular arrow will only pop up the first reply, and also will not indicate you replied to that email more than once.
If you reply to one email and also forward it, the forward arrow will sometimes show up instead of the reply arrow, sometimes it will not and the reply arrow will show, clicking on the forward arrow when it shows up will pop up the first email you sent as a reply or the only one if there was only one. if you forward more than once, the first forward will only show up.
It gets confusing I think and that feature is far from useful because it it apparently not reliable 100% of the time.
What I do to track multiple replies to the same email is to use rules with smart mailboxes, e.g. return mail residing in inbox and sent box if I want to see multiple replies to the same email that still is in the inbox. One can get very creative with rules for sure.
hope this helps.

How to see all items (more than 50) in the list without scrolling down in the column filter option (as attached)

Hi,
Any help?
Thanks
srabon

You can increate the view limit by modifying existing view and then setting the view item limit. Note that you will get worse performance for larger views of the data.
If you want more control over the filter options you can use the managed metadata filters to provide a more robust filtering system.
Other than that can you provide more detail? Your post isn't that clear.

How to see when SR Escalation was created in the Audit Trail

We have an FDA requirement that the Oracle SR audit trail show when an escalation was created and closed. The audit trail doesn't show this currently in our system. Looking for a way to make this appear in the audit trail.
We need to be able to provide a single audit trail through the forms (reports are not acceptable) that shows all SR details (as standard functionality) along with when the escalation was created and de-escalated (or closed)
Any ideas using 11.5.10.2?

Abhishek
I tried to delete the extension, in the Log tab, I only got one error which is:
Table CI_EEW_ORDERADM_H can't be created with package $TMP
Seems like the deletion process tried to change the structure CI_EEW_ORDERADM_H.
I checked this structure, there is already a field added by other developer, but this structure is apparently in another z-package.
So what I should do now?
Thanks

My resetting programs,like how to see picturesin email,and how to down load abdole to facebook

produt no.ny-644AA-ABA1003 question''how to see pictures on email pixer?and download Abdole /flash drive update how?

Hi 2587bj. What is the model number of your computer? What version of Windows is installed?
<How Do I Find My Notebook Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
<How Do I Find My Desktop Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HT1918 How do I change credit card. I cancelled the one on file

I have cancelled the credit card you have on file. I want to give u another. How do I do it?

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.
For future info typing all in capitals is considered shouting and makes posts difficult to read, and may mean that people don't reply to your posts.

If the iphone 4 (8G) shipment was delay behind of the delivery date, can i cancel the order without charge?

Dear Sir/Madam,
Recently, I was ordered the iphone 4 (8G) in HK and got the status of receiving the iphone on date 26-Nov or before. However, I haven't receive any iphone on that day so i was contact the apple hotline on monday morning (office hr, mon-fir, 9-6). They said i can cancel the order and wavie the cancel order charge. At this moment, i believed that this is settled.
However, afternoon in same day, Apple's customer service told me that i can't wavie the cancel order charge and suggest me to accept the order. If i can't accept the order, they will charge me 15% order fee. So i confirmed them to receive the order on next day again.
On next day (tuesday), i waited the order, but the order was not delivery to me (result dhl was delivery it to apple store). I was angry to contact your customer service, they replied me to say "I don't know why" and convinced me to "accept it devliery on the next day". At this moment, they made me very disappointed. So, I tried to apply the cancel order again, they said if you cancel order, you will need to pay 15% cancel order fee.
Up to now, the order was delayed two working days. I suspected the delivery date was incredible. How do i trust your product delivery on time?
And I am so argry that why your order cannot delivery to me on time and why if your order cannot delivery to me on time, can i waive the cancel order charge?
My order number: W239678975
Thx a lot.
your faithfully,
George

@Dougnvic, no need to worry because I'm here to help! The vibrate function is very important especially when you're in a situation where you cannot have the ringer turned on.
If we replace your phone through the warranty you are only charged for the equipment if there is any damage on the phone. The normal wear and tare is expected and you will not be billed for the phone because of these scratches.
Once the phone is received it is inspected for any physical or liquid damage. If damage is found you are then billed for the phone and the charge will appear on your bill. You will also receive a text message advising you of the charge. Once you are billed the charge cannot be removed even if you return the replacement.
If you change your mind and do not want to have the phone replaced you can just return the replacement once you receive it and keep your current phone. Just use the prepaid return label that will be inside the box of the replacement.
If you are sure there hasn't been any damage then there is nothing to worry about. You will not be charged. You can also take the phone into a store and have a store representative take a look at the phone before you return it, if that makes you feel better.
John B
Follow us on Twitter @VZWSupport

Can you buy the iphone with the at&t contract than cancel the contract?

Does anyone know or has anyone tried getting the iphone with AT&T and then canceling the contract? What is ATT charging for iphone if I do this and then cancel my contract? Seems like this is the only way to buy the phone outright without going through e-bay.

AT&T does sell the iPhone without a contract however it is still carrier locked.
3G 8GB - $499
3GS 16GB - $599
3GS 32GB - $699
Also if they have a 3G 16GB still in stock then its $549.
This is all according to AT&T's iPhone FAQ:
http://www.wireless.att.com/learn/internet/iphone-faq.jsp

How to see the DMP schedulings?How to cancel the scheduling?

Similar Messages

Maybe you are looking for