How to see the installed BI content process chain?

Hi Expert,
I've installed a BI content process chain, called 0TCT_MD_C_FULL_P01, but I can not see it in tcode RSPC, also can not use it. Can you tell how to make it available in RSPC?
Thanks a lot.
Happy.Bear

Hi,Check in RSPC under "Not Assigned"
And also chcek in Tables related to PCs,
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Thanks
Reddy

Similar Messages

I am not able to see the installed BI content object in the DWB

Hi ,
I am not able to see the installed BI content object in the DWB
and the BI server is new one, this is the First BI content info object I am installing.
for example I have selected 0Account BI content info object for installation
I followed the below steps for installation.
1 Drag and drop of 0Account info object in right side window.
2.Grouping option selected as only necessary objects.
3.collection mode selected as manual collection then executed using execuiton button.
4.selected the install all below option.
5.finally installed the object with install in background option.
job got finished successfully.
please let me know if I did any thing wrong and please post valuable suggestions.
Regards.
Srinivas

HI
If yor installing first time you have to select info area and object catalogs also else it will go and stored in unassigned nodes. whatever your doing the option for installing the business content everything is same, but in right hand side panesl select the info ares etc.
regards,
Chandra.

Install BI Content Process Chain 0TCT_MD_C_FULL_P01

Hello,
I am installing BI content Process chain (0TCT_MD_C_FULL_P01) for BI statistics.
I did the install but when I try to activate it says " Process has no predecessor" . Has anyone installed this chain and how did you do it. Can you please expalin me steps that u went through.
Best regard
Arjun

Try this.
http://help.sap.com/saphelp_nw70/helpdata/EN/3c/52304260c44446b401a0fd5b90f4a2/frameset.htm

How to create the variable variant in process chains for ip

how to create the variable variant in process cahins for ip

Hi venky,
check these links
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
bhaskar

How to delete the error stack in process chain?

Hi all,
we just want to do the following:
- we are loading in FULL daily to our datatarget (data is versionized by 0calday)
- we want to use the error-stack in order to analyze wrong data
--> but we now encounter the problem that, if data has once been added to the error stack and has not been handled yet, all data from the next daily load will be sorted out as records with this key do already exist in the error-stack. But that's exactly what we want to avoid.
with other words: how can we delete the records in the error stack by a report by e.g. using this in a process chain?
Thanks in advance,
Best regards,
bivision
Edited by: bivision2009 on Jul 6, 2010 12:25 PM

Dbl click that DTP.... From menu... Extras -> Setting for Error Stack
Here U can see error stack table name /BIC/B0001234000.
Using SE38, create simple program "Delete from /BIC/B0001234000"
In the process chain, add process type "ABAP Program" to add above deletion statement.

How to change the status of a process chain

Hi,
I went through Siegfried's blog and knew how to restart a process chain at a failed step which doesn't have "Repeat" option.
But is there any other function module through which we can change the "Actual State" of the process chain, in siggi's method we can change only the "i_state" of a particular process but not the "Actual State"(refer to RSPCPROCESSLOG table) of the process chain.
Please do give your suggestions if there is any way to change the "Actual State" of a process chain.
Regards

hey Vamshi,
We can directly change the status of the process chain.
there is a specific way to do it, you can go in se38 and change the status from one to another ...go to se38 .... type....rspcprocessmonitor*.........presss f4...
you will get a standard program ..
now go to this program ...and give the set of inputs .... like PID and all from RSPCPROCESSLOG table ..
and in the state give the state you want and press f8.
this should work.
Assign points if it answers your queries.
Thanks,
Dennis

How to stop the data loads through process chains

hi,
I want to stop all the data loads to BI through Process chains where load happens periodic.
kindly suggest how can I proceed.

Hi,
Goto RSPC find your PC and double click on START then change the timings, i.e. give starting date is 01.01.9999 like that Save and ACtivate the PC, it won't start till 01.01.9999.
Thanks
Reddy

How to check the status of other process chain from one process chain

Hi All
I have a requirement where I need to send an Email after successful completion of 3 process chains.
all these 3 chains starts at same time.Out of these 3, one chain daily takes more time to complete.
Is there any way so that in 3rd chain( the one that takes more time to complete) i can check whether the other two chains have completed successfully or not.So that when this chain gets complete I can send the success notification for all the three chains.
If possible please tell me the step by step procedure for doing this.
I have no question on sending Email through process chain.
Regards
Ashish

Hi
The OS Command is used for the following:
You use this process type to stop a system command in the operating system of an application server.
In the process maintenance for the operating system command, define:
The logical name of the operating system command you want to stop.
A command defined in transaction SM49 is used here. You can also change the command using the Change pushbutton.
The operating system of the application server on which you want to execute the command.
Additional parameters, as long as the defined command permits them.
The application server on which the command is to be executed. If you always want to use the current host, set the corresponding indicator. If you want to use a host other than the current one, enter this in the Target Host field; the system automatically deselects the Current Host.
After the run, you can find the standard text output by the command on the Process tab page of the log for this process.
For processes you may have implemented yourself, you can access this log using the CL_RSPC_SYSTEMCOMMAND=>IF_RSPC_GET_LOG~GET_LOG method.
I have never used the OS command myself, so I am not sure, whether it can be used in your case.
Check the following link, it might help,
http://help.sap.com/erp2005_ehp_03/helpdata/EN/fa/096d5a543b11d1898e0000e8322d00/frameset.htm
Regards
Shilpa

How to see the enitre ITAB contents and down load them while debugging ?

Hi All ,
One of my ITAb will be populated with 2000 records . Is there any option in Debugging editor to download and see all the fields and all the records at a time instead of 5 records with few fields. We are working in ECC 6.0 .
Thanks
Dharma P

Hi
You can click on 'Excel icon' while debugging, to download the contents of the internal table.
Also, you can click on the '+' icon to increase the internal table view, so that more entries are displayed.But, you need to use navigate buttons to scroll between columns.
Regards
Raj
Message was edited by:
Rajasekhar Dinavahi

Tech. Content Process Chain (0TCT...)

Hi,
I installed the technical content for BW7.0 and they are visible in BW but when I installed the technical business content process chains, they are not visible in RSPC. I did search for them but could not find any where. What can be the reason?
Please advice.
Regards,
Anil

Further to above post, While activating the technical content, system could not collect some of the infopackages as they were not in the business content. Is there any relation between process chain non visibility?

Removing the "target server" from process chain jobs

Dear SAP Community,
Please note we are on BW version 3.5
We have a very large number of process chains that are used to load data in the production environment. Many of those process chains have a "target server" specified, so that the jobs will run only on the central instance.
A new application server has just been added to the environment, and we want to remove the "target server" definition so that the dispatcher will be free to load balance the process chain jobs.
We can see the attributes for each process chain are stored in a table called RSPCCHAINATTR.
Please let me know: can we update the value of field SERVER in table RSPCCHAINATTR, to set it to blank using SQL-PLUS ?
And then can we run a /$sync to bring these changes up into the application layer ?
This would save tons of time & manual effort, and it would set the target server to blank for all of the process chains at once, instead of clicking manually so many times to clear the value for each process chain.
Please let me know if we can take this approach ? Is there any chance of the process chains becoming inactive by doing this ?
We want to set the "target server" = blank in all cases, instead of manually clicking into each and every process chain.
Please let me know, thanks.
Keith Helfrich
Edited by: Keith Helfrich on Aug 17, 2010 11:45 AM

Check tcode RSBATCH, If I'm not wrong all process types are assigned to central server. Remove that server name and save.
Now, If u execute process chain, system will prompt you assign server/host name. To skip this follow the below.
Again use RSBATCH, under 'Background and Parallel Processes' tab, click 'Switch Off F4 Popup for Server/Host/Group', enter * (star) under Users for 'Users for Whom NO Server/Host/Group Popup Should be Processed'.
Now, If u execute process chain, it should run on either of servers.
Since u added Appln Server, best bet would be creating a server group. See the below link.
How to run Process Chain jobs WITHOUT a target server

How to see the content of an attachment in sxmb_moni

Hi all,
Does someone know how to see the actual content of an attachment in sxmb_moni?
If I look under Inbound Message (CENTRAL)/Payloads, I would see one node for MainDocument and another node with the name of the attachment.
When I click on the attachment name, a word document shows with one line in it. That line is just the name of the attachment and nothing else.
How can I see the actual content of that attachment?
Thank you. Points will be awarded to helpful answers.
Regards,
-Michelle

I checked my coding again in debug mode. I cannot find anything wrong.
I duplicate here my coding again.
   DATA lo_attachment TYPE REF TO if_ai_attachment.
lo_attachment = lo_attachment_protocol->get_attachment_from_binary(
                      data = iv_attachment_content
                      type = iv_attachment_mime_type
                      name = iv_attachment_name
* set the attachment
DATA lt_attachments TYPE prx_attach.
APPEND lo_attachment TO lt_attachments.
lo_attachment_protocol->set_attachments( lt_attachments ).
The local variable LT_ATTACHMENTS has field payload-resource with the following expected values --
KIND : B
TYPE : application/msword
BINDATA : 00530068006F00740073005F0073007700630076002E0064006F00630020002000
The BINDATA correctly contains the dummy data I assigned.
I must have missed something. Can someone help?
Best regards,
-Michelle

How to see the MM invoice changes in sap?

Hi
How to see the MM invoice changes in sap ?

Dear Prashant,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
So you can always track it :
Go to ->SE16 ->Enter table name CDHDR -.>Table contents (F7)
In the selection screen enter
OBJECTCLAS as INCOMINGINVOICE
OBJECTID as =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
TCODE as MRBR
->Execute
You will find the details when it was released Date ,Time, User ID etc
Edited by: redriver on Dec 26, 2011 2:23 PM

How to see the England football. Which kind of player can I download?

How to see the England football and which kind of player can I download

Thank you to all for your answers.
I will try with getjar.
I have one more question concerning the installation of the applications.
I have Nokia PC Suite installed on my computer and a blutooth connexion with my phone.
Could someone tell me how I have to proceed ?
For example, I would like to install "KODi English-French Dictionary" (http://www.getjar.com/products/14408/KODiEnglishFrenchDictionary). On this web page, it is proposed to me to download a Jad file and a Jar file. Do I have to download both ?
Fab

How to see the billed invoices in VF04 transaction

Hi,
All
I would like to find a way to see the invoice number for collective billing. When we process more than one Delivery at a time,
The invoice number is generated in background and in order to find it that we have to reference back to the delivery. Is there an place to see this or
how to see the billed invoices in VF04 transaction
Thanks
rajesh

Hi
You may check the table VBRK, give the date of creation of invoice in ERDAT field and execute, it will give all the Invoice created on that date.
you may also check with ref. to the invoive no. in table VBRP for the Delivery no. in the field VGBEL.
If require you may create an ABAP Querry for these two tables VBRK and VBRP.
Hope it will help
Regards
AA

How to see the installed BI content process chain?

Similar Messages

Maybe you are looking for