How to see the Missing Auth in HR

Hi...
When I am trying to use the Tcode CBIH12 in ECC6 (client 200), It is throwing the below error message:
cbih12 --> Hit List ( F8 ) --> It is showing the below error message:
Internal Program Error: SAPLCBIH_ER00
SAPLCBIH_ER00
ERROR_CBIH_ER30_ER_READ 3)
Message no. C$153
Diagnosis:
Internal System error
Procedure:
Notify your system Administrator
Error data:
SAPLCBIH_ER00
SAPLCBIH_ER00
ERROR_CBIH_ER30_ER_READ 3
But, I am able to access successfully in client 300 in the same system.
When I see the SU53 in client 200 where I am getting the problem, Authorization check is Successful.
But it seems it's clearly an "Authorization" issue.
So, How to see the Missing authorizations in HR.
Can anybody help on this ??
Thanks..
Hari

Hi...Thanks for the response.
Ravi: No dumps(ST22) and also No error messages(SM21) are being created for this problem.
Julius:
We are getting the problem for the agent Type: EXPO_BIO in clinet 200.
We are able to get the data for the same Agent Type: EXPO_BIO in clinet 300.
Both are using the same Standard Function Module.
And also able to get the data for the another Agent Type:EXPO_CHEM in both the clients which is also using the same Function Module.
So it might not be the problem with the Function Module.
And also I have SAP_ALL authorization. I was able to access this till two days before.
2 days before only they implemented EHS authorisations. There onwards we are facing the problem.
Thanks in Advance..
Hari.

Similar Messages

How to see the Ringing Time of a Missed Call?

How to see the Ringing Time of a Missed Call?

I wanna see the missed call as a Genuine Call (Ringing for the full time) or a mere signal of a few second as a request for call back.

TS1424 Bought and Album and one song is missing after itunes froze cant see how to dowload the missing song as it says Purchased

Bought and Album and one song is missing after itunes froze cant see how to dowload the missing song as it says Purchased
Pls Help Best and Kind Regards

Depending upon what country that you are in (music can't be re-downloaded in all countries) then see if it shows under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunee. If it shows there but doesn't have the clpud symbol against it for redownloading then is that track listed in the Music part of your library i.e. where you would click on it to play it ? If it is then delete it from there and it should then get the cloud symbol against it in Purchased.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com . iTunes Support should reply within, I think, about 24 hours.
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How to see the authorization data of a user in Web Dynpro ABAP

Hi all,
if I have authorization problems in a normal SAP transaction I can use transaction SU53 to see the missing authorization objects.
How can I get the missing authorization objects for a Web Dynpro ABAP application?
regards

What about using SU53 again - just log into ABAP system and use the F5 - "other use"r option to select the user having the issues.
There is unfortunately no way to see this as standard from the WDA application.
Sorry,
Chris

How to see the content of an attachment in sxmb_moni

Hi all,
Does someone know how to see the actual content of an attachment in sxmb_moni?
If I look under Inbound Message (CENTRAL)/Payloads, I would see one node for MainDocument and another node with the name of the attachment.
When I click on the attachment name, a word document shows with one line in it. That line is just the name of the attachment and nothing else.
How can I see the actual content of that attachment?
Thank you. Points will be awarded to helpful answers.
Regards,
-Michelle

I checked my coding again in debug mode. I cannot find anything wrong.
I duplicate here my coding again.
   DATA lo_attachment TYPE REF TO if_ai_attachment.
lo_attachment = lo_attachment_protocol->get_attachment_from_binary(
                      data = iv_attachment_content
                      type = iv_attachment_mime_type
                      name = iv_attachment_name
* set the attachment
DATA lt_attachments TYPE prx_attach.
APPEND lo_attachment TO lt_attachments.
lo_attachment_protocol->set_attachments( lt_attachments ).
The local variable LT_ATTACHMENTS has field payload-resource with the following expected values --
KIND : B
TYPE : application/msword
BINDATA : 00530068006F00740073005F0073007700630076002E0064006F00630020002000
The BINDATA correctly contains the dummy data I assigned.
I must have missed something. Can someone help?
Best regards,
-Michelle

How to see the wait events info. after excute a select query

Hi
How to see the wait events info. after execute a select query. Are there any parameter to set for this option?
And also wanna see the follwing info. in trace file. For this what are the parameters I have to set right?
SELECT * FROM emp, dept
WHERE emp.deptno = dept.deptno;
call   count      cpu    elapsed     disk    query current    rows
Parse      1     0.16      0.29         3       13       0       0
Execute    1     0.00      0.00         0        0       0       0
Fetch      1     0.03      0.26         2        2       4      14
Misses in library cache during parse: 1
Parsing user id: (8) SCOTT Regards
Arpitha

$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Apr 20 15:29:33 2011
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> SHOW PARAMETER dump
NAME                                 TYPE        VALUE
background_core_dump                 string      partial
background_dump_dest                 string      /user/oracle/app/oracle/admin/
                                                 orclsb/bdump
core_dump_dest                       string      /user/oracle/app/oracle/admin/
                                                 orclsb/cdump
max_dump_file_size                   string      UNLIMITED
shadow_core_dump                     string      partial
user_dump_dest                       string      /user/oracle/app/oracle/admin/
                                                 orclsb/udump
SQL> ALTER SESSION SET EVENTS='10046 trace name context forever, level 12';
Session altered.
SQL> SELECT * FROM emp WHERE deptno=20;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800
        20
      7566 JONES      MANAGER         7839 02-APR-81       2975
        20
      7788 SCOTT      ANALYST         7566 19-APR-87       3000
        20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7876 ADAMS      CLERK           7788 23-MAY-87       1100
        20
      7902 FORD       ANALYST         7566 03-DEC-81       3000
        20Now
$ pwd
/user/oracle/app/oracle/admin/orclsb/udump
$ ls -ltr|tail -5
-rw-r-----   1 oracle   oinstall     622 Apr 20 11:35 orclsb_ora_949.trc
-rw-r-----   1 oracle   oinstall     651 Apr 20 11:35 orclsb_ora_976.trc
-rw-r-----   1 oracle   oinstall    1982 Apr 20 11:35 orclsb_ora_977.trc
-rw-r-----   1 oracle   oinstall    1443 Apr 20 15:29 orclsb_ora_1251.trc
-rw-r-----   1 oracle   oinstall 279719 Apr 20 15:30 orclsb_ora_1255.trc
$ tkprof orclsb_ora_1255.trc orclsb_ora_1255.txt
TKPROF: Release 10.2.0.2.0 - Production on Wed Apr 20 15:32:17 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
$ ls -ltr|tail -5
-rw-r-----   1 oracle   oinstall     651 Apr 20 11:35 orclsb_ora_976.trc
-rw-r-----   1 oracle   oinstall    1982 Apr 20 11:35 orclsb_ora_977.trc
-rw-r-----   1 oracle   oinstall    1443 Apr 20 15:29 orclsb_ora_1251.trc
-rw-r-----   1 oracle   oinstall 279719 Apr 20 15:30 orclsb_ora_1255.trc
-rw-r--r--   1 oracle   oinstall   26872 Apr 20 15:32 orclsb_ora_1255.txtThis orclsb_ora_1255.txt contains the required information.

I am not able to see the missed calls when my phone is locked.

I am not able to see the missed calls when my iphone 3gs is locked.And how to set own ringtones in iphone 3gs

Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

How to trace the missing authorizations using NWBC at object level

Hi all,
In SAP R/3 any authorization issue can be tracked down till authorization object level using SU53 tcode and ST01 tcode.
1 - I have a super user who has all the roles in Solution manager system and test user which I created with just 1 role Incident management role. But when I login with Super user ID I can see in tcode (WDY_APPLICATION - Incident Management ) I have 4 tabs (Overview,Messages,Reports and Queries) but when I execute the same tcode using test ID I can only see Overview and Messages tab. Report and Query tab were missing . Please advice on how to trace the missing authorizations using NWBC at object level? or how to solve this issue......
2 - How to add a Web dynpro Transaction code (example WDY_APPLICATION - Incident Management )while building a role in PFCG?
Thanks
LAK

Hi Gurus,
Can anyone please help me with my questions.
In addition here are few more info that I need
How to bring in the new authorizations without logiing off and logging in back in NWBC ( Equivalent to Menu-->Refresh in SAP GUI)
Thanks
LAK

How to see the Open PO Qty in Mass

Dear Experts,
How to see the Open Qty in PO in mass, is there any report available..Please help
Regards
karthik

use the Txn ME2N
Enter the follwoing details . Scope of list - ALV, Selection parameters- WE101, Plant- XXXX, Enter the document dates From and TO and execute ( F8), You will get all the details, If you want to adjust the format use cntrl+F8 to get the POP_up for selection of fields and use as you wish.

How to see the balance under different balance if special ledgers exist???

Some of the company using special ledgers. I need to teach user how to see the balance under different balance.
I will focus on
1. display voucher
2. check GL balance
Anyone have idea (detailed flow)/template (preferred) on these issues?
Thanks a lot for your help in advance

hi,
/n----
> acccounting -
>financial accounting -
>GL acccounts -
> information system -
> gl reports
here in this path u can get all the gl list and gl balances list ....
u can check what ever reports u want.....
if useful assign points...
regards,
santosh kumar

How to see the print preview of outgoing excise invoice.

Hi Experts,
How to see the print preview of outgoing excise invoice.
Thanks,
srinivas.

Dear Sreeni,
Just go to J1IIN, click on "Exc.inv for delivery -- Display" where you input delivery reference and execute. If you have generated excise invoice, you can see the corresponding excise invoice for that delivery / billing document.
Preethi.

How to see the object while moving on the artboard?

hello everyone;
maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.

What have they gone and messed up now?
When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
If what Bedri says is right, they’ve gone and mended something that wasn’t busted.

How to see the ouput of a purchase order on screen??

Hi all , how to see the output of a purchase order (ME23) on screen?
Points will be awarded!!!!
Thanks & Regards
John

Hi,
If any output tye is associated to PO and it is been triggered then User ME9F tocde to view the output.
To check thise first Use: ME23 and click on Messages, if any outputs are triggered and they are in Yellow status then Use ME9f. Once you execute you will get Outputs in the screen, then choose the output and click on Display Message button. Your output will be displayed on the screen.
Regards,
Ashok

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

How to see the Missing Auth in HR

Similar Messages

Maybe you are looking for