How to see user exit code

hi,
i have one user exit name with me like EXIT_SAPLVxxxxx. how can i see it's code.
thks

Those user exits are build as function modules. Just goe to transaction SE37, put in the name and there you go. Double click on the include in the FM and you'll see the code. If the include doesn't exist this user exit has not yet been implemented.
Regards,
Michael

Similar Messages

How to find User Exits/ Enhancments/ BADI's for T-code CJ20N

Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.

Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure

How to add USER EXIT in CMOD??

Basically I've copied IDOC_OUTPUT_DELVRY FM code from another system.
in that code I found user exit (EXIT_SAPLV56K_002).
Now my lead asked me to add this exit to his project(ZLE_PROJ) in CMOD.
anyone can help me how to add this exit and activate to ZLE_PROJ please....

Hi Mr. Bond,
Please check the sample given below.
User exits :
1. Introduction
2. How to find user exits
3. Using Project management of SAP Enhancements
1. Introduction:
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program
SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
    xvbak   = vbak
    xvbuk   = vbuk
    xkomk   = tkomk
importing
    lvf_subrc = lvf_subrc
tables
    xvbfa = xvbfa
    xvbap = xvbap
    xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits?
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD.
Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements, we want to create a project to enahance trasnaction VA01 .
- Go to transaction CMOD
- Create a project called ZVA01
- Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder.
Note that Sold-to-party now automatically is "2155"
Regards,
Renjith Michael.

How to find user exit for a perticular screen?

Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
Vj

User exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
        trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
      FORM get_data                                                 *
form get_data.
select single * from tstc
              where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
            where pgmid = 'R3TR'
              and object = 'PROG'
              and obj_name = tstc-pgmna.
if sy-subrc ne 0.
    select single * from trdir
             where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir
                     where pname = tstc-pgmna.
      select single * from enlfdir
                     where funcname = tfdir-funcname.
      select single * from tadir
                     where pgmid = 'R3TR'
                       and object = 'FUGR'
                       and obj_name eq enlfdir-area.
    endif.
endif.
select * from tadir into table jtab
             where pgmid = 'R3TR'
               and object = 'SMOD'
               and devclass = tadir-devclass.
select single * from tstct
          where sprsl eq sy-langu
            and tcode eq p_tcode.
endform.
      FORM write_list                                               *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey

How to create User Exits in ECC 6

Hi Experts,
good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
thanks you for your usual support.

Hello,
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Any Basics u wana know abt Enhancements.,.,go through the link.,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Thanks,
Swati

User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

How to implement User Exit in APO?

Hello All,
I am not sure how to use user exits. I was wondering if anyone can help me understand how to implement any user exit? Is there any T.Code where you do that? or ABAP coding is required? Also how different is BAdi from User exits?
Any advice is welcome.
Thanks,
Sanju

Hi Sanju,
Check this link.
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
BADI or user exit, I don't think it is a choice between the two. Both serve the same purpose, add some custom logic to the standard logic. It depends on your requirement, the point when the user exit or BADI is called, information that is available to you in that user exit/BADI and information that you can change in that user exit/BADI. There is no difference in implementing the User Exit in APO or R/3.
Regards,
Siva.

How to find user exit implemented in the program

how to find user exit implemented in the program or standerd transaction

try this program to get the list of all the user exits for a transaction...
*& Report Z_USER_EXIT                                                 *
*REPORT Z_USER_EXIT                             .
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
           tadir,    "Directory of Repository Objects
           modsapt, "SAP Enhancements - Short Texts
           modact,   "Modifications
           trdir,    "System table TRDIR
           tfdir,    "Function Module
           enlfdir, "Additional Attributes for Function Modules
           tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
    SELECT SINGLE * FROM tstc
      WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir
         WHERE pgmid    = 'R3TR'
           AND object   = 'PROG'
           AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir
           WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir
            WHERE pgmid    = 'R3TR'
              AND object   = 'FUGR'
              AND obj_name = enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
Find SAP Modifactions
      SELECT * FROM tadir
        INTO TABLE jtab
        WHERE pgmid    = 'R3TR'
          AND object   = 'SMOD'
          AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
          AND tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
      20(20) p_tcode,
      45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
        2 'Exit Name',
        21 sy-vline ,
        22 'Description',
        95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
          WHERE sprsl = sy-langu AND
          name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
          2 jtab-obj_name HOTSPOT ON,
          21 sy-vline ,
          22 modsapt-modtext,
          95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Where we can see the exit codes?

Hi All,
Where we can see the exit codes?
Can we see them in server instance log files? If yes how do we need to configure them.
Thanks.
Edited by: 835435 on May 11, 2013 1:23 PM

It is hosted by default at $DOMAIN_HOME/server/$SERVER_NAME/logs/$SERVER_NAME.log
You can customize these configurations on WLS CONSOLE, go on the server, Configuration tab --> LOGS subtab
Kinds
Gabriel Abelha

How to use User Exit for SD...

Hi there,
My client's requirement is to block the overall status of the Sales Order header under status tab to be blocked when user r-enters a new scheduled date in the "First Date" column in the SO.
When they goto VA02, & put a new date it must automatically put a delivery block in the header as well as make the order header status to be blocked.
I see the First date field in the SO is in a Structure RV45A, the field name is ETDAT.
Can you let me know how to use User exit MV45AFZZ?
When doing it, it must put the Delivery block in table VBAK LIFSK.
Rgds,
Pri

Hi Debadatta,
Welcome to SDN.
Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
Hope this will help.
Regards,
Ferry Lianto

HOW TO WRITE USER EXIT FOR EXTENDED IDOC

Can somebody please help me as i need the user exit code for Shipment idoc.
I append the structure of VTTP and add one field with the name of ZDELCST i.e Delivery cost so i want to update that table once the idoc will post.
I have to write the user exit for this but i have no idea how to do this so kindly requesting someone to please write the code for me and i will be very grateful to him/her.
The functional module is IDOC_INPUT_SHIPPL
and there is a CALL CUSTOMER-FUNCTION '012'
this will take us to function module EXIT_SAPLV56I_012
This includes ZXV56U08
Within this include in need to map the delivery cost from the idoc to the new append filed VTTP-ZDELCST

hi ,
'EXIT_SAPLHRBEN00GENERAL_014'
1)Goto CMOD tcode.
2)Click on Utilites on Menu bar.
3)Press Shift+F9, below in component name enter
EXIT_SAPLHRBEN00GENERAL_014,
4)F8 , then you will get Exit name PBEN0014
Double Click again Double Click you will get function
FUNCTION EXIT_SAPLHRBEN00GENERAL_014.
within this onel include file is there.
INCLUDE ZXPBEU14.
here you will write your Enhanc Code.
Reward if , you got soln,
Thanks.

How to write USER EXIT for ecc6.0 version

Hi,
Can u pls tell me how to write user exit program in ecc6.0 and also can u send me the sample program
thanks in advance.

hi ,
'EXIT_SAPLHRBEN00GENERAL_014'
1)Goto CMOD tcode.
2)Click on Utilites on Menu bar.
3)Press Shift+F9, below in component name enter
EXIT_SAPLHRBEN00GENERAL_014,
4)F8 , then you will get Exit name PBEN0014
Double Click again Double Click you will get function
FUNCTION EXIT_SAPLHRBEN00GENERAL_014.
within this onel include file is there.
INCLUDE ZXPBEU14.
here you will write your Enhanc Code.
Reward if , you got soln,
Thanks.

BW User Exit - Code in function of the query name

Hi,
I would like to create an user exit code which execute a algorithm different in function of the query executed. do you know in which variable is store the technical name of the query.
CASE query
    WHEN 'Z_ZAPO_001'.
       V1 = 1
    WHEN 'Z_ZAPO_002'.
      V1 = 2    WHEN '10' OR '11' OR '12'.
ENDCASE.

Yaroslav,
I_S_RKB1D-COMPID will never be filled for authorization user-exits (I_STEP = 0). Don't ask my why, I once raised this question to OSS and they replied it was never foreseen to work with authorization user-exits. God knows why, it's very unlogical and it wouldn't cost them a lot of work to get it working...
I could solve this problem by applying a little trick. In our queries we included a user-exit keydate variable. This will push the user-exit first in I_STEP = 1 mode where I_S_RKB1D-COMPID is filled. Then save the query name by exporting it to the ABAP-memory. Afterwards, the user exit with code for I_STEP = 0 will be processed and then you can import the query name from the ABAP memory.
I agree it sounds a little bit tricky but there is no better option I'm affraid.

How to handle user exits while using BAPI

HI experts can any one help me on how to handle user exits while using BAPI. Do we need to handle it explicitly or standard BAPI will take care of it??.
Regards,
Hari Krishna

If you have added some fields using append structures for screen enhancements, then you have to use appropriate user exits to fill these data while calling BAPI. Some BAPIs have EXTENSION structures to fill the custom data which can be processed using user exists or enhancements.
Regards
Vinod

How to see the source code of procedure

how to see the sourse code of already created procedure or function

Select text
from all_source
where owner = '<Procedure owner>'
and type = 'PROCEDURE'
and name = '<Procedure name>'

How to see user exit code

Similar Messages

Maybe you are looking for