How to see via command line blocked mails

Im having a problem...i have a C100 Ironport appliance and i want to know via command line, how to grep and see mails that never went delivered.
For example...i know that someone, like [email protected] send to my exchange server an email...but in exchange never entered. So i assume that it was filtered by Ironport.
I go to the command line, use grep and 13 and search for [email protected] and i see something like this
Wed Apr 18 14:17:54 2007 Info: MID 3977209 ICID 8813638 From: <pedro>
Wed Apr 18 14:18:44 2007 Info: MID 3977209 ready 3019672 bytes from <pedro>
I see that 2 mails came from pedro....so i want to see what happened to them...they were bounced? rejected? Delivered?
I dont have any email in the local quarantine... and i want to know how to track what happened to those emails that never entered to my exchange server.
Is there any command?
Than you!

Wanted to add that you can shortcut the "grep" process by putting everything on one line.
grep -i "Mid 3977209" mail_logs
grep -i "ICID 8813638" mail_logs
grep -i "From: " mail_logs
basically
grep -i "pattern" mail_logs
-i ===> ignore case
Im having a problem...i have a C100 Ironport appliance and i want to know via command line, how to grep and see mails that never went delivered.
For example...i know that someone, like [email protected] send to my exchange server an email...but in exchange never entered. So i assume that it was filtered by Ironport.
I go to the command line, use grep and 13 and search for [email protected] and i see something like this
Wed Apr 18 14:17:54 2007 Info: MID 3977209 ICID 8813638 From:
Wed Apr 18 14:18:44 2007 Info: MID 3977209 ready 3019672 bytes from
I see that 2 mails came from pedro....so i want to see what happened to them...they were bounced? rejected? Delivered?
I dont have any email in the local quarantine... and i want to know how to track what happened to those emails that never entered to my exchange server.
Is there any command?
Than you!

Similar Messages

How do I remove Lotus Notes PDFMaker plugin via command line?

How do I remove the lotus notes PDFMaker plugin via command line? I originally deployed Adobe Acrobat 10 as a complete install to many computers. I see how to remove this specific feature through the GUI in Windows 7 by going to control panel / programs and features / Adobe Acrobat X / change / modify / create adobe PDF / acrobat PDFMaker / Lotus Notes, but this would be a tedious task to do manually at each computer. I've experimented with a few msiexec commands after removing Acrobat such as:
msiexec /i "\\path to msi" remove=pdfmakerforlotusnotes
msiexec /i "\\path to msi" disable_pdfmaker=yes
Both still install acrobat as a complete install. Any help and suggestions would be appreciated. Thank you!

Thank you Sabian, that did the trick. Here is the command line I used for anyone else having a similar issue:
msiexec /i "\\path to msi" REMOVE=PDFMakerForLotusNotes /qn
I did this on a test machine with a complete Acrobat installed. I ran the above command and it removed the Lotus Notes PDFMaker plugin. I should also note that it didn't downgrade my version of Acrobat and all of my custom settings within the application are still there.

How can I install on Windows remotely via command line?

Hello Folks.
I want to install an application on Windows remotely and via command line, For example, I need a tool like Psexec or WMIC but I don't like the user understand it. Any idea?

Hi,
Please also refer to following FAQ article and check if those four general ways will meet your requirement.
[Forum FAQ] How to deploy applications remotely
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to turn off Bluetooth adapter via command line or script?

I'm trying to write a batch script that will be able to turn on/off any connected Bluetooth adapters.
In the "Bluetooth Settings" window, how can I change the "Turn off Bluetooth adapter" setting via command line or script?
Due to my account not being verified yet, I cannot post a screenshot. I will update this thread as soon as my account is verified.

get-service -DisplayName 'Bluetooth Support Service' | Stop-Service
¯\_(ツ)_/¯

How to change fcalias www via command line & particular port performance status

how to change fcalias www via command line & particular port performance status

how to change fcalias www via command line & particular port performance status

How do I get LR2 to "load from device" via command line?

Hi,
how do I get LR2 to "load from device" via command line?
I've got XP to load LR2 when a "camera" (and only a camera) is connected but really cool would be if LR2 would also import the pictures.
cu,
Michael

1. Make sure you are using IOS 7.
2. Make sure your iPad is register in My Support Profile.
https://supportprofile.apple.com/
3. Try downloading again; it should be free.

How to merge multiple documents via command line (Adobe Acrobat Pro 9.3.2)?

I'm searching solutions to merge multiple documents (all stored in one folder) via command line or batch file to a single PDF-File...
Is there a way to do this?
Finaly I want to control this from a application written in MS-Access. So, perhaps there are some features already integrated in Access to do this?
Thanks for answer!

If you have some programming experience you could probably do this using VBA from within MS Access to control Acrobat via OLE.
Lots of examples on the Web.
Hope this helps

[SOLVED] How to Crop an MP4 Video via Command-line?

I have ffmpeg, mpg123, and mencoder. Does anyone know of a way I could use any of those to crop an mp4 video via command-line? I am trying to take off the black space above and below a video. Thanks in advance!
Last edited by tony5429 (2009-04-12 00:12:57)

I don't think it's possible to crop without re-encoding, but you can crop from the command line with ffmpeg and mencoder. Not sure about mpg123 - I think that's for playing audio but I could be wrong there.
Anyway, with ffmpeg you can do cropping by using -croptop, -cropbottom, -cropleft, and -cropright. So if you wanted to crop 16 pixels off of the top and the bottom, your command line would look something like this:
ffmpeg -i <input file> -croptop 16 -cropbottom 16 <video encoding options> <audio encoding options> <output file>
With mencoder you use the "crop" video filter, like this:
mencoder <input file> -o <output file> -vf crop=320:208:0:16 <other options>
where the "320:208:0:16" means that the resulting picture is 320 pixels wide, 208 pixels high, and the 0:16 is the x,y position of the cropped area.
These command lines are just really very basic examples - ffmpeg and mencoder have a LOT of options. Way too many to explain here. If you don't believe me, just try reading through the mencoder man page sometime. (There's an online version of it at: http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html)
Hope this helps!!

How to install Developer Tools via command line

Hello,
is there a way, to install the Developer Tool via Command line?
I need only the unix tools.
I have to install the unix tools over a ssh connection.
Thanks in advance and best regards
Martin

I followed the link you gave. The only download I saw was for Xcode 4, and they either wanted $5 to purchase it from the app store or a 1 year mac developer license thing which was $100.
<Edited by Host>

[SOLVED] How to Create an Image from UTF8 Text via Command-line

As the title points out, I'm trying to create an image from unicode text via command line. I tried...
convert -pointsize 48 -size 400 caption:测试用 text.png
But that results in question marks for the Chinese characters. So searching around online I discovered that I needed to specify a font which could display the characters. The characters show up just fine in Firefox, KDE, Kate, Terminal, etc so I know I have a font which can render them. I thought it might be DejaVu but this also resulted in question marks...
convert -font /usr/share/fonts/TTF/DejaVuSerif.ttf -pointsize 48 -size 400 caption:测试用 text.png
Any ideas?
Last edited by tony5429 (2011-01-31 23:17:41)

DejaVu doesn't contain those Chinese glyphs at all, so please don't blame ImageMagick for not rendering them.
So, Firefox, Kate, Terminal and the others you stated to use DejaVu, if encounter these characters, fall back to some other fonts to render them. These fonts are, however, not vector, but bitmap fonts. (This can be seen if you increase text size (Ctrl++ in Firefox): the Chinese characters don't change, they remain of their inherent size.)
Actually, e.g. /usr/share/fonts/misc/18x18ko.pcf.gz definitely contains the three example characters, so the mentioned apps may use this font as fall back.
Apparently ImageMagick doesn't handle bitmap fonts (I'm not sure), so you won't be able to hit your original target. Anyway, since you tried to parse "-pointsize 48", you wouldn't be satisfied with the font size.
Your only choice seems to be using the above mentioned CJK-approved TTFs.
EDIT: typo
Last edited by barto (2011-01-28 21:52:33)

Turn on "Real-time preotection" via command line

Hello!
We have a cient without networking resources and I need to turn on the "Real-time protection" which is currently in OFF state.
How can I do that via command line?
I tried to review the "mpcmdrun" command but did not found proper switch to turning on this service.
Regards,
Tamas

You could do a regedit command to silently import a .reg file with the setting in it:
create a .reg file from the following key:
HKLM\SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection
Name: DisableRealtimeMonitoring
Type: REG_DWORD
Data: 0
Then import it silently with this command:
regedit /s C:\ExamplePath\Example.reg
You could also do a PowerShell command:
Set-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection' -Name DisableRealtimeMonitoring -Value 0

Can't rename the lap1041 hostname via command line

We have lots of new lap1041 need be set static IP Adress, hostname, Controller Adress via command line, but when use command (capwap ap hostname) to set hostname , always give us cammand disabled, we used command:clear capwap private-config, but it does not work, why?

Thanks for your reply.
The Lap is new and has not join the WLC( the WLC has not connect to the network), we can set the LAP IP address, Controller IP address via command line, but can not set host name, even though we power the lap via AC.
LAP version 15.2(2)JA
following is the error message:
APacf2.c594.0137#capwap ap hostname test
ERROR!!! Command is disabled.
Further more, how to set the location?

Add protocol args with quotes via command-line

I am creating a small script to insert objects into the SGD databases (ENS) via command-line and perl. I have some difficulties with protocol-arguments which require quotes (").
For example:
/opt/tarantella/bin/tarantella object new_windowsapp --name "o=applications/cn=new_winapp" --width 600 --height 800 --protoargs "<protocol-arguments>"
The problem comes when I need to add multiple protocol-arguments with quotes like: -dir "c:\Program Files\Application Directory"
Can someone tell me how to add those arguments including the quotes?
Thanks,
Remold Krol | Everett

Try to use the single quote ( ' )
say, for instance
protoargs 'dir "c:\Program Files\Application Directory" '
That works for me.
Regards.

Running reports via command-line with /batch option

Hi,
I have created a batch file which runs, and exports the results of 7 different discoverer reports with /batch option.
Contents of batch file:
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input1.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input2.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input3.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input4.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input5.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input6.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input7.txt"
Sample of a cmd file the bacth file runs:....
/connect user/password@oraprd /apps_responsibility "BIS Super User"
/open "H:\Projects\DRP Import Modelling\Dev\Intransit Extract.dis"
/sheet 1 /export xls "H:\Projects\DRP Import Modelling\automation\Intransit Input.xls" /batch
The batch file runs ok and processes each report in sequence, and creates the excel export one after the other.
However, I need to process the 7 reports in parallel, so changed the batch file to process in own thread :
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input1.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input2.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input3.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input4.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input5.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input6.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input7.txt"
The reports kick off at the same time and I can see 7 dis4usr.exe processes running via task manager
Problem:
The first reports runs and exports ok.
All the others dis4usr.exe processing stops with the following error pop-up:
! Could not open file. OK
Question:
Can you only process reports sequentially via command line mode with /batch option?
If not...what am I missing...its driving me insane :)
All asistance is greatly appreciated. Thanks

Ladies and gentlemen.....I have solved my problemo!
The reason why the rest of the reports were getting the 'could not open file.' error was due to the fact that each discoverer instance launched was
trying to access the same standard log file simultaneously.
I modified each cmd file to write logging info to individual files: eg
/logfile "H:\Projects\DRP Import Modelling\Automation\input2_log.txt"
Now that's there's no contention with logging, the reports are firing off beautifully in parallel :)
I am definitely having a beer this evening!
Thanks for everyone's input...kept me on the righteous path :)

Stop database via command line

Hi,
I need to stop and oracle database via command line, but I´m not secure how to do it.
More thanks

Hi Ruben,
Start database
shell> sqlplus / as sysdba
SQL> startup;
Stop database
shell> sqlplus / as sysdba
SQL> shutdown immediate;
Documentation: http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/toc.htm
Regards
Stefan

How to see via command line blocked mails

Similar Messages

Maybe you are looking for