How to see views created on query in a report.

Hi
Could you please help me out urgently?
I have a question regarding how to see views created on query in a report.
Is there any table or query through which we can see views created on Query?
Thanks & Regards
Neha

Hi,
If you created a view on any query,
What is view ?
once you execute the query and save the output as view right ?
But we can not see the view in query output.
Insted of executing the query, directly we can execute the view which you have saved as query output.
Open the BEX and search for the view insted of query then it will give you the out put directly.
I hope it will help you.
Regards,
Yerrabelli.

Similar Messages

How to see PR created by MRP

hi
i run MRP by md02
how to see that how many PR has been created and how many production order created
i try to use ME5A nothing is displayed
please explain thanks
ganesh

hi kiran
thanks for your reply
i am facing one problem
for material xxxx in MD03 i got 100- in rec/req qty and 96 exception messge
i try to view in MD05 i got No MRP list exists*
Where i did mistake
thaks
ganesh

How to see view table in discoverer

Hi All,
Can any one tell me how to see a view table which is a multiorg data to see in Discoverer as we know if some abc_v table by running in TOAD we are using
BEGIN
DBMS_APPLICTION_INFO.SET_CLIENT_INFO('ORG_ID');
END;
OR
BEGIN
FND_CLIENT_INFO.SET_ORG_CONTEXT('ORG_ID');
END;
But how to use this in Discoverer.
Regards,
Sushant

Hi,
Usually you set the contexts using either a Discoverer logon trigger or using the Applications system profile "Initialization SQL Statement - Custom" which allows you to run some PL/SQL to initialize the session.
Rod West

How to find how name of view and table using in Discoverer report

Hi all,
Please help me, i have requirement, i need name of views and tables used in discoverer reports.
plz help its urgent.
regards,
Vivek Gautam

As per my knowledge goes, We can see from Administrator which Folder is associated with a Workbook. Else you may have to manually open each and every workbook and look for the objects.

How to create collection (query) based on report results?

Hello everyone,
I have the following report;
I would like to create a collection based on the "Non Compliant" and the "Unable to find compatible TPM" so I can re-deploy with right-click tools.
If the above is NOT the solution to create a group for redeployment. How would I address this?
Thank you in advance for any help.

Unfortunately, there is no straight-forward answer here. ConfigMgr console queries use WQL and only have visibility to a subset of the complete information in the database. Most things you are probably interested in creating queries from are probably visible,
but that's not guaranteed. Additionally, they are named slightly differently also so it really just takes some trial and error and personal investigation to see what is there and what isn't. The place to start is to open the root\sms\site_<sitecode>namespace
on the system hosting the SMS provider. The public reference for most of the classes is at
http://msdn.microsoft.com/en-us/library/hh948405.aspx . These all directly map to data in the database but as mentioned, not all views in the DB have a corresponding WMI class.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to see VIEW and METHODS in webdynpro applications ?

Hi ,
I am New to WEBDYNPRO applictions , How can i see
ABAP Webdynpro Application ZAPPROV View V_GETLIST Method VALI_APP....and BOR Object ZBUS2081 get_property approverlist changing container.....Can any one kindly let me know .
Regards,
Veera

open transaction SE80
in the repository browser, select Webdynpro component/interface in the dropdown.
type the name of your webdynpro component and press enter.
The component will open up, it will have the views, applications that you have created in this component....you can see them as it is required.
On the left tree, there will be a node for VIEWS, open it and find your view V_GETLIST in it. The view wil open up on the right....there you can find the tab methods in the end (right most)....a list of methods will be displayed....double click on the method name and you will see the code

Where are Views created on query region stored in database?

Hello All,
Using 'Saved Search' in my query region, I have created a View.
I want to know where is this created 'View' stored in the database.?
Regards,
Rabo

Hello
Nope.
By 'View' I mean, the 'Save Search' criteria.
Where are these *'Save Search'* criteria's stored/saved in the database.?
Regards

How to see error message for a failed crystal report in CMC BO XI 3.1

Hi,
I do not have much knowledge on CMC.
Currently there is a crystal report failing on server.
I can see the error message on CMC as "Object failed to run due to an error while processing on the Job Server".
Is there any way i could see the actual error message causing this issue.
Attached is the error message.
Please suggest.
Thanks
Rahul

Hi rahul,
Can u try these
:Object failed to run due to an error while processing on the Job Server.
2 )Object failed to run due to an error
3 )Object failed to run due to an error while proc... | SCN

How to Use or Create XSD files in Crystal Reports XI R2 designer

Hi,
I have a crystal reports application which was developed using .Net crystal report designer, where XSD is used .
now we have to develop the same application using Crystal Reports XI R2 designer , here i could not find any option for creating or using XSD files , can you give any suggestions on that
regards,
kathyaini

Hi Kathayini,
Thanks for your prompt reply.
We can use the existing XSD which are present in .Net
But with current versions of crystal we doesn't have the feature to create XSD files at crystal designer level.
So, it is suggested to use the XSD files which are present in .Net and can also create new XSD files.
Let me know if you have any further queries.
Regards,
Naveen.

Transporting Views created for Logical Database in QAS

Hello all,
Can anybody let me know teh steps...
How to transport views created for logical database from dev to QAS...
kindly give the steps...
thanks
saurabh

I don't think PNPCE does anything with HRP infotypes. PNPCE is all about PA data since PERNR is the main key. Logical DB PCH is the one that deals with HRP Infotypes.

Data Mining : Association Analysis - How to find the Created Data source

Hi friends ,
I had created a model for Association Analysis and I trained the model and I had maintained a Data source for the model and my question is it shows the associate data source name as "Z_RSDME_AX_DS_0002" and the Application Component as "0DM_XSEL" but when I tried to search for Data source it shows that Data source not found, how to see the created Datasource
Thanks & Regards,
Vishall
Edited by: vishall somasundaram on May 5, 2011 4:00 PM

Hi,
Go to RSA1 and click on Data Sources. Give the Source System as the client name of your BI system. It will show you all the list of the datasources under your BI client. Now under datasources in the topmost node, right-click and select replicate metadate. It will give you options to replicate your Z_RSDME_AX_DS_0002 datasource. Once replicated, just activate the datasource.
Until and unless you replicate metadata you wont be able to see your Z_RSDME_AX_DS_0002 datasource.
Hope it helped.
Thanks,
Appu

How to see all GL A/c List & Chart of Accounts list

Pls tell me, How to see all created GL A/c List & Chart of Accounts list

Dear Jaheer,
For all Gl account please use T code-S_ALR_87012333,Just give company code and execute.
For All COA list Please use T code-S_ALR_87012326,just execute after entering the T code.
Hope this will solve your requirement.
Regards
Eugene

How to create a new Activity with report

I would want to know how I do to create a link in a report that connects me to the page of the Client to add a new record of activity if i want.
Substantially this link allows me to create a new activity in an agency that I directly select from the report.
Thank Vale.

Hi
You should use the observer user for performing read-only operations.
This is one of the users that is created when you installed AccAD.
Here is the section that mentions it from our administration guide:
You are asked to provide passwords for the root, admin, and observer
users. Make note of these passwords since you will be required to provide them later.
When the installation is complete, log out root and log on again as admin.
Important
Perform any additional operations using the secured admin account. You can use the observer account to access the AccAD Administrator web UI in read-only mode only; this user cannot log on to the machine.
Best,
Zeev

How can I see the Query view created for a different user

Hi All,
How can a user see the View of a query created for a different user??
I would like some info about how to give access ( if it is a access problem) or tell me the steps to do that.
Regards, Federico

Hi all,
Maybe I didn't explain me as i should or maybe you dont know what is a Query View. Lets try again, showing you the steps to open a "Query view".
This way is from Bex Analyzer (Excel)
I open the Bex Analyzer and connect to the system -> Open query -> Under "Type" choose "Query View"...this is just a different view of the original query (more or least columns/rows).
This way is from Bex Web:
Once you open/execute the query, you have a ComboBox to choose the view (previously saved)
The problem that we have is that the views created for a user, can NOT be found by other user. The only user who can is the owner.
Could it be an authorization problem? or is ther any configuration possible to see it?
Thanks in advance, Federico

How to prevent end user to create a Query View and save back to BW Server?

Dear All :
Do Someone know that how to setup authorization for Bex Query View Creation? We want to prevent end user to create a Query View to save back to BW Server his favorite folder. when our user run Bex Query, he can base on this query and use Bex Analyzer's save function to save a Query View and save into his favorite folder.
My question is :
1. Can we set up a Authorization to prevent end user to save Bex Query View?
2. Or can I remove Save function from Bex Analyzer to prevent end user use save function, But Developer should not to be prevent .
Thanks for all of your kindly response.
Best Regard
Lawrence Kuo

Hi.
Yes, you can do it like you outline in your point 1):
You need to use the authorization object S_RS_COMP for this. This object let's you control what parts/components of a query the user can do stuff to. So, in your case, you need to have a role for the users, where you do not grant create-access to the component QVW, and then you need another role for developers, where you grant full access or whatever you need for your developers.
See [this post|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330?QuickLink=events&overridelayout=true&5003637661135] and the [SAP Help entry|http://help.sap.com/saphelp_nw70/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm].
You will also need to use the authorization object S_RS_COMP1. If you already have a productive system with users doing reporting, both objects will be maintained in one of the roles already.
You also want to consider using the object S_RS_PARAM to allow users to create variants for the variabel screen.
Good luck.
Jacob

How to see views created on query in a report.

Similar Messages

Maybe you are looking for