How to see who/what is on my router.. please?

Thanks for looking.
I would like to view what ips / ssid's are on both sides of my router. for example, the LAN side and the WAN side.
i'd like to do this for both the existing AE "n" and "g"
Thanks tons
Tom

Just another related question to this. When I look
at the wireless clients it also says signal and
noise. The numbers are -53 and -92 respectively.
What do these numbers mean and what range should
these be in? Thanks.
It's the measure of the power of your transmitter, for both signal and interference. Here's a quote from one website:
dBm (dB milliWatt)
A signal strength or power level; 0 dBm is defined as 1 mW (milliWatt) of power into a terminating load such as an antenna or power meter. Small signals are negative numbers (e.g. -83 dBm). For example, typical 802.11b WLAN cards have +15 dBm (32mW) of output power. They also spec a -83 dBm RX sensitivity (minimum RX signal level required for 11Mbps reception). Additionally, 125 mW is 21 dBm, and 250 mW is 24 dBm.
Disclaimer: This really isn't my field, and I'm not enough of (read: not at all) an engineer to tell you what a "good" signal strength ought to be from an 802.11n router. However, dB is a logarithmic scale. A difference of 10 dB = 10-fold difference, a difference of 20 dB = 100-fold, etc. So in comparing your signal to noise numbers (-53 to -92), you've got a spread of ~40, or 10^4 difference, so it's not like you have a lot of interference and degradation of your signal compared to background. FWIW, my mini connected to our AEBN reads out at about -42/-89 (about 15 feet from the router), our MacPro at -45/-92 (about 10 feet and under a desk) and our MacBook at -30/-96 (about 6 feet from the router). Larger (more positive) numbers = stronger.
Intel Mini, Mac Pro, MacBook C2D Mac OS X (10.4.8)
Vista and XP running under Parallels

Similar Messages

How to see who imported an transport request

Hello
I wander how to see who imported an transport request

Will table E070 display the transports in the order that they were applied?
ie. If I go to QAS system and look at table E070, will the date/time stamp indicate the order of transports?
We too are in a delima in organizing a LARGE volume of transports that will go to production to HCM customizations (we are getting rid of PeopleSoft and using SAP HCM for payroll , time and labour, ESS/MSS etc..)
I (BASIS) will be doing all the transports (almost 2000), and the dev. team has a transport log they have been keeping BUT I want to have a system reference to verify the order they have in the log with a more accurate list.
So will table E070 provide that for me?
I am looking at the table now, but the date/time description indicates it is the last update... not sure what that exactly refers to
Thanks!
Maria

How to see who's using my account on iMessage

today i was talking to my friend with i meassage and then someone started typing as me please tell me how to see whos using it, and i changed my password but that didnt work.

It is VERY possible!
Is this a new cell phone number?
If someone had it before, they might still have it active in WIFI, even if it's disconnected at the carrier. This has been happening to me, for a while. Ever since my girlfriend got a new number on her LG, the previous owner has been getting messages I am sending. Unless I turn off iMessage, which then forces them to the cell as text (SMS)
There is NO PROCESS TO FORCE SOMEONE TO STOP USING THEIR OLD NUMBER ON WIFI IMESSAGE
ON A DISCONNECTED IPHONE!!!!!
VERY SERIOUS ISSUE!!
Jobs would be rolling over in his grave if heard this!!

How to see who deleted the Object

Hi Gurus
Would you please advise if some data target or transformation is deleted from the BW system how to know who deleted the objects?
Thanks

How to see who deleted the Object

How to see who is calling in a conversation group?

When my conversation group calls i can't see who is the caller. How can you see that?

Btw its only with the new version of skype, with the old version you could see who was calling.

How to see who are currently logged in the system through in EP

hi,
I want to see , who are currently logged in the system through in EP , like al08 or sm04 in r3.
Please guide me

Hi,
Portal activity reports will help you in getting all the user details who are logged on to the portal.
Portal activity reports help you which page or iview the users visited.
There may be many content in the portal. But the monitoring people mainly wants what content people are mostly visiting. This can help them to update that content frequently. Not only that the content people are not visiting can be made more attractive or it can be removed also.
using portal activity you will not get what content the user is accessed, but you can get the what content(iview/page) most users are visiting.
Raghu

How to see who perform modifications on CUA parameters.-

Hi All,
I hope this note find you well.
Basically, what I need is to see who,when, etc perform several modifications on CUA Parameters.
i.e : Tx SCUM --> Defaults Tab --> Logon Languaje --> Changed to "Proposal"
If I go through Tx SALE/SCUM/SCUL I can't find out what I need.
Guys, I hope you can help me on this and please let me know if you need further details about it.
Kindly,

You can check your Audit Log SM20, also check STAD for access to those transactions, I think you can get some of the change information in SCUL too.
Regards
Juan

How to see who is a remote operator

How can I see who is currently assigned as a remote operator in our tree?
I cannot seem to find how to run a report to show who has been given these
rights.
Thank you!

Remote operations are implemented as eDirectory write trustee rights to
one of the following attributes:
DM:Remote control
DM:ZEN File Transfer
DM:ZEN Remote Execute
DM:ZEN Remote View
So you can use any tool for reporting effective eDir rights to check who
can do remote operations.
From already prepared tools the closest one is found in C1. Click on WS
object and go to Remote Operators tab. Click on display button and you
will see who has remote operator rights to that WS and where are those
rights coming from.
Denis
On Tue, 23 Oct 2007 20:16:12 +0000, Adam wrote:
> How can I see who is currently assigned as a remote operator in our tree?
> I cannot seem to find how to run a report to show who has been given these
> rights.
>
> Thank you!

How to see who is tracking my location

can someone track my location from thier computer and how can i see who it is

Not unless they have your Apple ID and password.
If you suspect that someone does, change the password and security questions.

How can see who is the owner

Hi all
By using sql query .
how can i see,who is the owner of the user id?
Edited by: Balajiraam on Mar 15, 2011 10:53 PM
Edited by: Balajiraam on Mar 15, 2011 10:54 PM

select owenerid,osuser from v$session where username =<<Schema_name>>
AND STATUS ='ACTIVE'
In place of <<Schema_name>>, please use schema name on which your sql stmt is executing.
Edited by: Sanjeev on Mar 15, 2011 10:59 PM

How to see for what company codes we run payroll for ?

Hi gurus
I have a question, generally our users run payrolls by payroll areas, but i want to see for what company codes we run payrolls, is there any report or table to see that ? i checked it in T001 using sm30, where i could see all the company codes (but this didn't answer my question) in this table there are some company codes for which we dont run payroll . so is there any way to see exactly for what company codes we run payrolls ? or should it be seen in financial side ??
please advise
regards
sangitha

Probably you can use Adhoc query to fetch company codes from IT0001 using a given Payroll area.
Does this make sense?
Regards
Chandra

AFP Sharing--How to see who's connected???

Looking for a solution. I manage approx. 10 macs in an office where most systems have afp enabled. I know a can monitor who's connected to our osx server with server mgr, but I want to do the same thing on the client machines (i.e. for any given client machine; see who's connected to it).
Currently, I've modified the AppleFileService Access Log in Terminal so that connection history/status can be viewed with Console, but I'd like a better way. Is anyone aware of any potential solutions using applescript, automator or some existing freeware/shareware that would show any active connections. A nice icon in the menubar (similar to iChat) where a list of any connected users is displayed would be ideal.
Any suggestions/recommendations would be appreiciated! Todd
Various G4+ ppc's and intel's Mac OS X (10.4.9)

Hi Todd
I've used xAFP - it relies on the same log file and gives you a quick-and-dirty menu icon (which reads "a0" for reasons I can't quite fathom).
matt

Someone/somewhat texted using my number but not physically using my phone. how can i control or see who/what is doing so?

Help please!

I'm not sure exactly what you need to accomplish. If you want to actually control and run LabVIEW from Excel, I think the only way to do that is with writing a VBA macro and calling the LabVIEW ActiveX properties and methods. I couldn't find an example with VBA but maybe this Visual Basic example here can give you some ideas. If, on the other hand, all you want to do is change some values that a LabVIEW program is using, the easiest way is to make those values changeable on the front panel of your VI or make your VI read the Excel spreadsheet. Reading an Excel spreadsheet can be done with Excel's ActiveX properties
and methods or treating the spreadsheet as a database and using ADO. One ActiveX example can be found here. If the Excel spreadsheet is saved as a text file with comma or tab delimited data, then you can use the Read From Spreadsheet function in LabVIEW. There have numerous examples and discussions on reading Excel files posted to this forum. if you do a search, you'll find a wealth of information.

How to see if what a specific load process is doing?

Hi all, having a little bit of a problem in that I have a load (not replication) job that seems to be hanging (not failing) but also not loading any data into HANA or not finishing.
- Attempted to load table STXL in full, 440k or so rows loaded into HANA
- Created an include for BOR event to filter all but 1 record, worked fine in about 3 minutes and 1 record present in HANA
- Added additional code to decompress a compressed column format, code shown below. This was tested in a 'standalone' fashion as a program in an ECC system, so this is migrated to SLT as an include. In this case, the load job is just "hanging", it's not failing or not finishing. When I look in the monitor, can see it running for the last say 15 minutes "In Process".
From here, no data ever makes it into HANA and the job in SLT doesn't seem to finish.
How to diagnose where this is getting hung up or where the problem is? Normally if the code is bad, I would get a hard error in the application logs, which I don't get here.
Code for include
*& Include           Z_TEST_IMPORT_TEXT
types: begin of ty_stxl_raw,
         clustr type stxl-clustr,
         clustd type stxl-clustd,
       end of ty_stxl_raw.
DATA: lt_stxl_raw type standard table of ty_stxl_raw,
      wa_stxl_raw type ty_stxl_raw,
      lt_tline type standard table of tline,
      wa_tline type tline.
IF <WA_S_STXL>-TDNAME <> '0020874233'.
SKIP_RECORD.
ENDIF.
clear lt_tline[].
wa_stxl_raw-clustr = <WA_S_STXL>-clustr.
wa_stxl_raw-clustd = <WA_S_STXL>-clustd.
append wa_stxl_raw to lt_stxl_raw.
import tline = lt_tline from internal table lt_stxl_raw.
READ TABLE lt_tline into wa_tline INDEX 1.
<WA_R_STXL>-TEXT = wa_tline-tdline.

Frank, awesome to hear you worked through the issues.
Regarding DMC_STARTER, can you share how you were able to find the issue, specifically with such a large dataset, did you just step through until you hit a dump? When I referred to the documentation on debugging (that I had not yet created!), here is what I gathered just last week as a rough start. I'll probably repost this as a blog if you can confirm it is similar to your steps.
- Ensure however you would like to test has already been started
- For example if you want to test initial load, start the initial load and let it fail, and follow the steps below. When DMC_STARTER kicks up, it will start initial load again in debug.
- If you want to test replication phase (picking up logging table records to process), get a table to replication status, stop the master job, then make a change in the source to log new entries in the logging table and follow the steps below. When DMC_STARTER kicks up, it will start in replication phase, picking up logging table records for processing.
After the above is "set up" for testing, do the following, some of the functions will have different names based on your implementation.
- SE38, DMC_STARTER
- Use Migration Object Z_<TABLE_NAME>_<CONFIGURATION_ID>, Z_STXL_001 for example, access plan = 1, test mode = X
- /h to enable debug
- Find OLC function module call CALL FUNCTION olc_rto_ident, set breakpoint, continue to enter the FM
- Enter 1CADMC/OLC_100000000000*, find CALL FUNCTION '/1CADMC/IL_100000000000769', set breakpoint, continue to enter the FM
- Enter /1CADMC/IL_100000000000769, find PERFORM _BEGIN_OF_RECORD_0001_, set breakpoint, continue to enter
- Enter PERFORM _RULE_BOR_C., the include code should be found here and you can step through.
Regarding your issues discovered
1) When I referred the code changes I need to tag on the other blog, I was referring to the following
- Check for <WA_S_STXL>-SRTF2 = '0' to only grab the first line (as you mention)
- The CLUSTR size as you mention is a helpful check.
- Also need to put a check above the processing of the record to be able to handle DELETE's, else you'll get a short dump. When a deletion occurs, only the key columns are passed through this logic, and when we are working (importing) on a non-key field it will of course be empty and cause a dump.
if <WA_S_STXL>-CLUSTD is not initial.
*Put Source fields into internal table for IMPORT statement to work on, main logic here
endif.
2) The specific texts we were targeting would never be this large, they only consist of one single line so we never hit this issue. In the case you exceed 345 lines, are you just truncating the remainder?
All in all, great stuff - good to see someone taking this concept further. If you want a deeper look into the folks who are doing much heavier text processing with additional logic (and much stronger ABAP'ers than I ), see Mass reading standard texts (STXH, STXL)
Happy HANA!
Justin

How to see who deleted the operations in order

Hi,
Through assembly processing service orders are getting generated from sales orders.We have OISD link for Task list and service Material.
In some orders orders users deleted the operations.Now the client wants who deleted the operations in order or atleast what are the operation activity deleted or any possible info on this.Pl suggest
Regards
SB

Dear Arunachalam,
If you want find delete or any changes done by order,is this question only you expecting it is very easy tofind
open wich order you want to see then go top menu Extras --> Documents for Order --> Changes here list will appear
the list contains order no, name of changer , date , time, table, t code and so many fields available
if you see you can idea,
Hope this may helps you
Prem.

How to see who/what is on my router.. please?

Similar Messages

Maybe you are looking for