How to selct base station to connect

I have an Airport TC connected to the internet in the office.
I have an older Airport Extreme in the Family room with some non-wireless equipment plugged in.
I have an iMac (802.11n) that sits between them, but closer to the Extreme.
I also have a Airport Express to extend the network to the front of the house.
I want the iMac to connect directly to the TC instead of going through the Extreme.
Is it possible or will it connect to the Extreme because it's a stronger signal?
Regards,
Brett

Unfortunately, Apple does not provide a means for Macs to designate which device to which they connect. The iMac will always connect to what it feels is the strongest signal.

Similar Messages

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

Airport Extreme Base Station Internet Connection issue

I have a connection question for Airport Extreme Base Station.
I have Comcast cable broadband. I connect that to a Linksys router for
use with my Vonage phone, and then from the Linksys router I connect
via Ethernet to my iMac. I like the direct Ethernet connection for
performance reasons.
In order to set up a home network to connect my Tivo's (and eventually
my PC and printer), I have set up an Airport Extreme Base station and
connected it to the Linksys router from it's ethernet connection to the
WAN (cable modem) input on the Extreme.
I have connected to the Airport network with my iMac, but since I am
connected to the Internet via Ethernet, I cannot tell if my Airport is
connected to the Internet so that I can use it for my Tivo. My PC is
still in storage from a move, so I can't check with that.
My question: How can I tell if my Airport is connected to the Internet
without disabling my Ethernet connection on my iMac?
A few more info points/questions in case it helps answer:
1) I previously used this Airport to connect this iMac wirelessly.
2) Should I be connecting it to the LAN port since it's coming out of
the router?
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
I appreciate any help as the online and manual help from Apple is not
quite up to par with such a complex configuration.
Regards
Bill

2) Should I be connecting it to the LAN port since it's coming out of
the router?
No, connecting to the WAN port is fine.
3) If the connection issue is because I am going through the Linksys
first, can I connect the modem to the airport and then use the LAN port
to connect to the Linksys router?
The issue is that you have two routers which effectively creates two networks. Unless this was your original intent, you will want to setup the AEBS as a bridge.
To set up the AirPort Extreme Base Station (AEBS) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new settings.
- Wait at least 5 minutes.
4) If I have to disable the ethernet connection to test the Airport,
how do I do it? Just unplug it?
Well, that's certainly one way, but an easier way is to temporarily disable the "Built-in Ethernet" in your network configuration.
System Preferences > Network > Show > Network Port Configurations
- Built-in Ethernet (unchecked)

Set AiportExtreme Base Station LAN Connection to 10base/T ?

Is there any way to force the Airport Extreme Base Station LAN connection to 10baseT/UTP half duplex ?

I had LinkSys PAP2 phone adaptor for Vonage that was connected to my AEBS. It died and I got a replacement but new PAP2 would never work. I think when the original PAP2 died it did something to the AEBS LAN port. The PAP2 does work connected to my iMac ethernet. If I connect my AEBS LAN to my iMac it does not work but I found that if I change the iMac ethernet port to 10baseT it works. It's like the AEBS LAN port now only works reliably connected to a 10baseT connection. So, instead of buying a new PAP2 I wanted to connected the PAP2 to the AEBS with the AEBS set to 10baseT.

In a WDS, how can I force a satellite base station to connect directly to the main station

I have 2 Airports Extremes (Call them A and B) and a Time Capsule set up in a WDS. All are recent vintage at V 7.6.1 firmware. Airport A is the main base station connected to the internet via ethernet to a cable modem. The satellites, Airport B and the Time Capsule, are in opposite corners of the house. Airport A is in a media closet in the middle of the downstairs, Airport A is on the east end of the house, about 40 ft away, with a wood door and drywall wall in between. The Time Capsule is on the west side of the house, with just the floor/ceiling in between it and Airport A.
When the WDS is functioning normally (most of the time), both satellites connect directly to the main station, and Airport Utility describes each connection as Excellent. But at least once a day, one of the satellites will connect to the other satellite, not directly to the main station. When this happens, Airport Utility describes the connection as Good or Average and my online throughput decreases by about 5 fold in both directions. The only thing that works every time to get it back to it's proper setup is restarting all three, which is really a pain.
Is there any way to force the satellites to connect directly to the main station?

So is it possible to connect a non-USB Mac to an
Aiport network through the ethernet port in any way?
Yes
Using something like the Linksys Ethernet Wireless Bridge WET54G.
Original Airport Card Alternatives
http://tech.ifelix.net/1030.html

Using AirPort Extreme Base Station to Connect a Hard Drive

I have a wireless network set up using a wireless device provided by my network provider. What I would like to do is to use my Airport Extreme Base station only to connect a hard drive to it. However when doing so, Airport Utility does not recognize or see the Extreme. The Extreme can only been seen if connected to the router provided by my network provider. How can I set up a wireless hard drive or printer with the Extreme without connecting to the network?

Samir, why you wanna use service provider wireless instrument when you have world class wireless device
you don't need 2 wireless ???
I am not expert but I used common sense, I had linksys N series router but recently I bought TC 1TB
so what I dumped my N router in store and went ahead with TC installation, Trust me it took me 10 minutes to configure my 4 HDD 5 computer printer etc with TC
I am sure you have a ethernet modem too separate from your wireless instrument
try to do a clean installation ( thats where all these people who has problem, trying to connect to their existing network
try setting up your AEBS as fresh wireless device connect to your modem and run Airport Utility
I am sure you will be a happy apple customer
good luck

Airport Express - Extreme Base Station - MacBook Connection PLEASE HELP!

Ok, i thought i had a pretty good idea of what i was doing with my mac stuff but apparently not, can someone talk me through how to set up the following - i've google and searched forums far and wide and cannot seem to find a simple walk through guide, even read the manual. The Airport Express manual online still says you can only stream to one device at a time.
I have an Airport Extreme Base Station broadcasting a DSL connection from a router - works a treat. I also have 1TB WD Hard Drive plugged into the Base Station which works as a shared AirDisk - also works a treat. I have two stereos at each end of the house and got my hands on two Airport Express devices (Models: A1084 and A1088).
I've gone through every possible scenario in setting these up to join the network but once they're 'joined' there no sign of them, and they no longer show up in my Airport Utility so can no longer configure them, thus having to reset them and start again.
I've tried a) setting up a WDS network, the base station as the main and the express' units as remote. No show in iTunes and no real show of being on the network at all; and b) tried leaving the existing network as is and joining the express' to that, again, they supposedly 'join' (i assume, only because they no longer show up as their own network) but do not show up in iTunes. As far as I've tested and found, I have the latest of all versions of software / firmware available, including Leopard, iTunes and Airport Utility... HELP! It's driving me MAD! And a thousand thank you's in advance...

Thanks for your help, after trouble shooting to no end, I've discovered it has something to do with the WEP password I was using and after reading through many a support article I found this article: http://support.apple.com/kb/TS2098?viewlocale=en_US - however, the $ sign doesn't seem to work to when setting up the Express' (even tried making the password the very one used in that article) and when I set the network up initially, it seemed my flatmates PC's only joined the network if I used a WEP password, rather than a WPA that i'd rather use.
Any suggestions here? Do I have to use a WEP password to let Windows join?

How many airport base station can you have at one time?

I currently have a abse and a abs dual ethernet. My set up is the cable is connected to the abse sending out g. The abs is daisy chain and sending out b. My c2d machine is communicating with the abse using g and my old G4 is communicating with the abs using b. I am doing this because I do not want the abse to communicate at b. When I go out to get the new n abse will I be able to add on to this or will I be or am I already wasting time and money. I just do not want any abs to downgrade to b. Any ideas or suggestions will be great.

If you add the new AirPort Extreme Base Station (AEBS) to your current configuration, you can set it up so that you have three separate (b/g/n) wireless networks. Each would have it's own Network Name (SSID) and set to only operate at their own specific 802.11 standard. To work the Base Station connected to the Internet source would be set up as a router, and the others in "bridge" mode.
Now, if you attempt to connect a non-n wireless client to the "n" network, it will degrade the performance a bit, but not down to either "g" or "b" level. This would be true of the "g" network as well.

Airport Extreme Base station cannot connect to Westell C90-36R516-01 DSL modem

Hi,
I just purchased a new Airport Extreme Base station for my 15" Macbook Pro. I set everything up this morning per the docs (all cables are connected properly) but the Airport Extreme is flashing an amber LED, which means it cannot establish communication to the network/Internet.
I'm using an old Westell C90-36R516-01 DSL modem that has been working fine up until now. I've tried switching out the Ethernet cables and different powering on/off combos but nothing appears to work. When I connect the Ethernet cable directly into my laptop, I have to power down the DSL modem, power it back on, and then do several refreshes before I finally get an Internet connection.
I read a previous post about unplugging the modem overnight and then plugging it in the next morning to wipe out the MAC address setting. I will be trying that tonight, but I was wondering if there was anything else I could try in the meantime? Or, is it simply a matter of having to get a newer modem from Verizon because this one is 7-8 years old?
Thanks for any help you can provide.
Solved!
Go to Solution.

Hi Max,
Let's start from the beginning,
The ethernet from the modem should be wired to the Wan port of the Airport...
On page 28 of the users manual it says if the light flashes amber you should unplug the power of the modem, wait a few seconds and power up the modem.
I presume you installed the Airport utility from the disk that came with the Airport?
For more information about the reason the light flashes
Open AirPort Utility, select your base station, and then choose Manual Setup from the Base Station menu. ClickBase Station Status to display information about the flashing light
Here is a link to the Manual CLICK HERE
I was hoping to find out more about the Airport utility to see what's it's capable of doing...

Extreme Base Station Loses Connection When Slept

To improve overall system security, I recently changed my account from an Administrator to a Standard Account, and created a separate Administrator's Account. Now whenever I or another user start up from sleep mode, enter our standard user password, the airport connection is lost and an admin password is required to get it going again.
Is there any way to ensure that the connectivity is not lost when sleeping, or it is automatically reconnected when awoken from sleep, without the use of an Administrator's password?
2GHz dual G5, ATI X800 XT, 2 X 500Gb HD, LaCie D2 1Tb, 3.5Gb RAM , 23" HD Panel Mac OS X (10.4.9) Airport Extreme 802.11 (n) / 802.11 (g) on on G5 Mac Pro

djeddy, Welcome to the discussion area!
When switching the cable modem's Ethernet connection from the MacBook to the AirPort Extreme base station (AEBS), you should power off the cable modem for a minute or two (often longer).

Toshiba 4015 , Linksys wpc11 , Extreme Base Station cannot connect! Help

I have one IP address coming into a wired router(linksys bsr41), The router has two good ports. I go directly from one port to a homemade pc and to the airport extreme base station with the second. I have a mac mini wired to the port on the base station. I use imac g5 wirelessly with no problems.
I am trying to set up a Toshiba 4015 CDS to use wirelessly on my deck and I am having a lot of trouble. The Toshiba is upgraded to win 2000 and has 160 meg Ram. I am attempting to connect to the base station with a link sys wpc 11 wireless - b card. I have tried to change numerous setting on the base station but with no luck. I have power to the card but no link. I have used the linksys utility and it can't see the aebs and have tried a 3rd party utility recommended by linksys(freescape????) but it cannot see the base station either. Any suggestions would be greatly appreciated.
I connect through dsl. Thanks, Mike

When I connect cable to the lan port , I cannot connect with dhcp or with dhcp disabled.
I tried both... restarting aebs and imac wireless and could not connect. When I disable dhcp I am forced to enter manual settings and I am not sure I have correct Ip address since it is behind my router. My internet provider said my base station would have to be behind the router because of a cloned ip address. I am not quite sure what that means. Thanks again for the help.....I have a xmas party to go to but will try further recommendations when I get home.

How to restart base station via SNMP ?

How to restart airport extreme via SNMP, with snmpwalk for example ? I can get a lot of information from base station with snmpwalk and airport-mib but still mystery what to poke when I want reboot base station over network.

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

Airport Extreme Base Station to connect MacBook Pro to internet?

With a new MacBook Pro do I need an Airport Base station or something other purchase (product) to connect to the internet wirelessly while I travel?
Thank you very much in advance for your time in this matter.

Duane is correct.
The wireless is built in. Whoever you are connecting to will have a base station. If you want wireless at home you need a base station connected to your internet connection.
Good luck.

AE Base Station wired connection problem..

Okay..
I have cable internet hooked up like so:
Modem --> Airport Extreme Basestation extended by 2 AE expresses...
I use the LAN port on the AE basestation to route internet to the hardwired computer.. This has worked well until recently... I recently recieved a new cable modem that work fine when the desktop comp is hooked directly to it. When I try hooking it up to the base station this is what happens:
the airport signal will be great.. all wifi users can surf and connect to the network. The wired computer will work for about 30 mins or so then will stop recieving signal. The only way to get it to regain internet is to reset the cable modem... The wifi users Never lose signal or internet.
is my ae basestation going bad? If i dasiey chain a normal router between the modem and the basestation, there is no problem and everyone gets internet just fine.. would prefer not to have it there though.
Any ideas?

I doubt your base station is going bad - since internet access works perfectly with another router between the cable modem and your main base station. I suggest you leave it that way. There is no downside to that type of setup, and it could save you a lot of trouble trying to find out why a direct connection doesn't work reliably. There just seem to be some combinations of ISPs and cable modems that don't work well with the Airport Base Station.

HT4260 Does this setup assume each additional base station remains connected to the primary by ethernet?

I have 1 x Time Capsule + 1 x Extreme + 3 x Express which I would like to connect in a roaming network. The TC is connected to the internet directly through ethernet (my house is ethernet wired). The remaining base stations should all connect to the same network created by the primary base Time Capsule (same name and password), but not wired back to the Time Capsukle but through the ethernet ports in each room. However I can't get this to work.
Any suggestions as maybe I am missing something here?
Thanks P

For a roaming network to work, all of the base stations need to be connected back to the Time Capsule (in this case) by Ethernet. So, one configuration would be to connect an Ethernet drop cable between the LAN port on the TC and an Ethernet switch or switch panel. From there Ethernet would run to various locations in the house. At any of these runs, you would connect a base station ... so that all base stations are on the same subnet as the TC.
The key is that the primary router must be connected to the Internet modem and all other routers reconfigured as bridges. Please check out the following Apple Support article for additional details on configuring a roaming network.

How to selct base station to connect

Similar Messages

Maybe you are looking for