How to select a stable IOS version for switch ?

There isn't any GD version for switch. So how did I know which version is stable ?
thanks!

Hi there,
Usually the most efficient way of selecting a stable version of IOS/CatOS is to take a look through the release notes at the caveats section and verify if there are any issues that would affect your network directly. In addition, working with your local SE is a good idea, as they can offer you their design advice. Usually, a wise move is going with the latest release within a given branch is the most stable, as it includes the most bug fixes. I hope this helps.

Similar Messages

  • Is it same IOS version for Switch & Router?

    Hi,
    Is it same IOS version for Switch & Router?
    Regards,
    Samuel

    Sam,
    The Latest Version depends upon the Switching platform.
    For example:
    On 2900XL Platform - 12.0(5)WC15
    On 2950 - 12.1(22)EA8
    On 3500XL Platform - 12.0(5)WC15
    On 3550 - 12.2(25)SEE2
    It would be better if you specify the switch platform that you have questions about, so we could point you in the right direction.
    I hope it helps.
    Regards,
    Arul

  • I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

    I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

    Highest an eMac can go is 10.5.8...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
    There are workarounds if the 867MHz is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    List of Applications Not Compatible with Leopard...
    http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.

  • How to update the iPad iOS version? I have an iPad (first generation) iOS 5.1.1. I can't update the software via WiFi nether via iTunes

    I have an iPad (probably first generation - Model A1337 ). This tablet has iOS version 5.1.1.
    I would like to update for the latest version as possible.
    There is no option by iPad wifi.
    I also tried by iTunes and in option Checking for UpDate, only let me know the current version, but doesn't open the possiblity to update for a newer.
    How can I update the software version ?
    tks
    Reinaldo

    Hi,
    The first generation iPad is limited to iOS 5.1.1. This is due to the original iPad not having enough power or memory to get to iOS 6, 7 or any further in the future.
    All other iPads and iPad Minis can get to the current version - iOS 7.0.4 and at least until the end versions of iOS 7 or iOS 8.
    Hope this helps, and Welcome to the Apple Support Communities!

  • IPad supported iOS version for development

    Hi, i have a reference iPad (1) for development, running iOS 4.2.1, now i need to upgrade to 4.3 for testing, but iTunes wants me to download the latest (5.1).
    In Organizer i can see that supported iOS versions are:
    Xcode Supported iOS Versions
    6.0 (10A403)
    5.1
    5.0
    4.3
    How can i get the 4.3 and install on my dev iPad?
    Anyone managed to do this?
    Thank you.

    Not possible.
    Older versions of iOS are not available once a new version is released.
    ***** but that's the way it is.
    About the only thing you can do is find a device that has the version of iOS you want and purchase it.

  • How do you determine the firmware version for a laptop docking station?

    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin

    atenpo wrote:
    How do you determine the firmware version of a HP docking station?
    Laptop Model: HP 2740p
    OS: 64bit Windows 7
    Expansion Base: 2740 Ultra Slim Expansion Base WA995AA#ABA
    Thank you for any assistance.
    Alvin
    WA995AA#ABA shows to be a hard drive, not a docking station

  • How do I get the trial version for Photoshop CS6 extended from the Creative Cloud Trial

    Hello ...
    Plz I wanted to downlad the trial version of Photoshop CS6 Extended and I followed this link
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop&loc=en_us
    Then I chose this option : Option 2: Join Creative Cloud and download now (Recommended - it's free)
    Then the adobe application manager has been installed and the photoshop CS6 started to be installed automaticaaly and after it done , I found it the standard version not the Extended ... So how and where can I get the Extended version for both 32 bit and 64 bit?
    Your prompt reply is highly appreciated
    Thank you ....

    So if you download the trial from the trial page at http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop you get Photoshop CS6 Extended.  When you then remove the trial and reinstall from the Adobe Application Manager with your trial Creative Cloud you only see the Standard version?
    If this is so you can try reviewing your installation logs by following the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.  Although your 30 day trial has already begun.  I would recommend for now you just remove the installation and install from the trial page so that you can try the extended features.

  • How to select full book in ibooks for speak select ?

    How to select full book to read in ibooks for speak select

    http://royalwise.com/rw/ibooks-as-audiobooks/
    Read up on VoiceOver BEFORE you turn this on:
    http://support.apple.com/kb/ht3598

  • Is there a minimum IOS version for windows radius 2012R2

    Hello,
    We use a windows server 2008R2 and NPS for radius authentication of our 887,881 and 891 routers, ASA V8.4, and 3750 switches.
    We are thinking about migrate our radius to windows 2012R2, wich is a new version of NPS.
    do you know if there is a minimum IOS version required for NPS on 2012R2 Windows ?
    Thanks

    Hi,
    Yes NPS will work with Window Server 2012R2 and for the minimum server certificate requirement
    check the below link.
    http://msdn.microsoft.com/en-us/library/cc731363.aspx

  • AS5350XM - Compatible IOS version for 'ip host ... srv' command.

    Hi Friends,
    I'm having AS5350XM model of Voice Gateways in CVP8.0 environment working with ICM8.0 and CUCM8.0.
    I'd like to define static hostname-to-address mappings in VG for my CVP CallServers along with command argument 'SRV' to use  all 4 CVP servers for loadbalancing and failover functionality thereby assigning priority to each call server.
    I tried by using a couple of IOS version starting from 12.4(24)T4 till 15.1(3)T, but can't find a particular version which supports the argument 'srv'.
    I'd appreciate if someone could suggest me an appropriate IOS version supporting 'srv' argument with 'ip host' command on AS5350XM Gateways.
    Pls feel free to revert for any clarifications. Thank you.
    Regards,
    Soman Nair.

    You should be able to do it.
    In your dial peer you should be able to say
    session target dns:callserver.sgp.foobar.com
    and in your IP host table
    ip host CA1.sgp.foobar.com 10.10.1.2
    ip host CA2.sgp.foobar.com 10.10.1.3
    ip host CA3.sgp.foobar.com 10.10.1.4
    ip host CA4.sgp.foobar.com 10.10.1.5
    ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA1.sgp.foobar.com
    ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA2.sgp.foobar.com
    ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA3.sgp.foobar.com
    ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA4.sgp.foobar.com
    Regards,
    Geoff

  • Best IOS version for 3750 switch

    I have just received 2 3750 switches, but both have a different IOS version.
    One has -> IOS version 12.1(19)EA1d
    and the other has -> IOS version 12.2(25)SEB2.
    I just want to use the switches as Gb collectors for a serverfarm seperatly (so no stack configuration) with a redundant uplink to my distribution layer.
    Can someone advise my which IOS is the best for my network?
    Thanx, Marty

    Switch 1:
    Cisco Internetwork Operating System Software
    IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(19)EA1d, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Mon 05-Apr-04 22:06 by antonino
    Image text-base: 0x00003000, data-base: 0x009206D8
    ROM: Bootstrap program is C3750 boot loader
    BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
    2224-3750-037000137 uptime is 23 hours, 52 minutes
    System returned to ROM by power-on
    System restarted at 09:02:42 GMT Thu Aug 11 2005
    System image file is "flash:c3750-i5-mz.121-19.EA1d/c3750-i5-mz.121-19.EA1d.bin"
    cisco WS-C3750G-24TS (PowerPC405) processor (revision H0) with 118776K/12288K bytes of memory.
    Processor board ID CAT0904X00B
    Last reset from power-on
    Bridging software.
    1 Virtual Ethernet/IEEE 802.3 interface(s)
    28 Gigabit Ethernet/IEEE 802.3 interface(s)
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address : 00:13:1A:65:50:00
    Motherboard assembly number : 73-7058-12
    Power supply part number : 341-0045-01
    Motherboard serial number : CAT090400A0
    Power supply serial number : LIT09020266
    Model revision number : H0
    Motherboard revision number : A0
    Model number : WS-C3750G-24TS-E
    System serial number : CAT0904X00B
    Hardware Board Revision Number : 0x09
    Switch Ports Model SW Version SW Image
    * 1 28 WS-C3750G-24TS 12.1(19)EA1d C3750-I5-M
    Configuration register is 0xF
    Switch 2:
    Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Wed 08-Jun-05 01:19 by yenanh
    ROM: Bootstrap program is C3750 boot loader
    BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
    2224-3750-037000138 uptime is 59 minutes
    System returned to ROM by power-on
    System image file is "flash:c3750-ipservices-mz.122-25.SEB2/c3750-ipservices-mz.122-25.SEB2.bin"
    cisco WS-C3750G-24TS (PowerPC405) processor (revision L0) with 118784K/12280K bytes of memory.
    Processor board ID CAT0925Z0WZ
    Last reset from power-on
    1 Virtual Ethernet interface
    28 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address : 00:14:A8:71:CA:00
    Motherboard assembly number : 73-7058-13
    Power supply part number : 341-0045-01
    Motherboard serial number : CAT09251J90
    Power supply serial number : PHI09220165
    Model revision number : L0
    Motherboard revision number : A0
    Model number : WS-C3750G-24TS-E
    System serial number : CAT0925Z0WZ
    Hardware Board Revision Number : 0x09
    Switch Ports Model SW Version SW Image
    * 1 28 WS-C3750G-24TS 12.2(25)SEB2 C3750-IPSERVICES-M
    Configuration register is 0xF

  • 3560 IOS version for IPT + duplex settings?

    Hi! Need a recommendation of which IOS version to use for a 3560 w inline power to be used with ip telephony. Also does the ip phones work well with duplex set to auto?

    You check after the IOS ver 12.1(11). This will support IPT

  • How to audit Mac, iCloud, iOS contacts for errors?

    Don't miss Winston Churchhill's Address Book Accounts Basics (with iCloud).
    On syncing: is there an Applescript or utility that will audit every linked iCloud account, Mac and iOS device for discrepancies between the Contacts databases? I thinking of the simple case like ours, where we want everything stored in the iCloud Account once-only-once, plus whatever Group-ings are useful.
    Even better - a script or utility that will force synchronization?

    Thanks heaps Julian for your nearly instant reply.
    Out here in the South Pacific where we get intermittent Internet connectivity, with gaps of weeks, the sync issue seems to me to be more complex. For sure, some of this could well be due to configuration/preferences errors.
    E.g., we registered for iCloud sync within a couple of months of Lion release. We bought all of Joe Kissel's relevant Take Control books and tried hard to make the migration from Leopard/Mobile Me error-free. Long-story short, I'm looking at an iPad/Contacts that displays all of the groups from the pre-Lion Mac Pro Address Book, an unknown number of entries in the All Contacts view (some of which are local-only entries?). NB that 5 hours ago I deleted some ten of those groups from Mac Pro Address Book. But they still appear on the iPad.
    And AFAIK there is no way to display the item counts. E.g., how many unique contacts exist on
    iCloud
    iPad1
    iPad2
    MBP
    MP
    How many contacts in each group? What groups do a contact belong to (option key trick)?
    Today I discovered that both Macs had (I think) incorrect preferences left over from the iCloud migration. That is Address Book/Preferences/General should have had Default Account = iCloud but actually were set to "On my Mac".
    So every new contact would automagically NOT SYNC. We made the incorrect assumption that following Apple's migration instructions would "just work" as they have typically for almost 30 years:-)
    So I am trying to clean up all sources of errors and make every device identical. Absolutely guaranteed identical.

  • How are you tracking deployed software versions for traceabili​ty?

    I am curious how others are tracking deployed software versions in automated test environments.
    I am working on a medical device tester and we have a somewhat inefficient method for keeping track of all version numbers. I would like to know what tools are available to automate tracking version throughout a project, from build to viewing later. Or, what methods are typical in this type of environment.
    Essentially, we need to be able to say at any given moment what software version is running at 3 remote locations on several deployed systems.
    For simply automating the process of viewing the version number programmatically, I found this, but we've had issues with it:
    http://digital.ni.com/public.nsf/allkb/D45E3A1E694​815AD86257173005CFD36
    This solution requires a "separate" installer to get the .NET framework onto the target PC. Also, it doesn't work (to my knowledge) with the Help>>About window.
    Comments?
    Dan Richards
    Certified LabVIEW Developer

    Dennis,
    Thanks for replying. We are using SVN. The exact ECO process for this project is under construction as it is a relatively new project and deployments will be at our customer's site. We use JIRA for tracking specific change requests.
    Here's an example of our basic process:
    - Software changes made (according to JIRA tasks) and source code checked in
    - Builds released per schedule with version numbers (from JIRA projects) hard-coded into the application
    - Builds deployed at different locations & times
    Here's what I'd like to see to improve things:
    - Builds released with version numbers generated from one of the following:
       1. Loaded from JIRA release numbers - maybe auto-generated for reference by LabVIEW when building the application
       2. Part of a custom build launcher
             >> This would be a custom interface that runs functions like those in Application Builder palette while also sending version info
             >> Perhaps it could prompt the user for version info or read from something auto-generated.
    - Builds should automatically make version numbers visible within the application (for example, LabVIEW has the Help>>About window)
    - Build numbers should be programmatically/dynamically accessible without having to install an additional .NET framework that isn't listed in 'Additional Installers'
    Curious if there are any tools that support these kinds of things. I am aware of Deploy by Wirebird Labs and Proligent by Averna, although I am lacking in knowledge about specific features.
    Regards,
    Dan
    Dan Richards
    Certified LabVIEW Developer

  • HT1766 how to recover my old ios version with datas ?

    i want my old ios version back with datas ..........

    Enter an address for your Page wrote:
    TJBUSMC1973
    On Mon, Sep 15, 2014 at 8:26 PM, Apple Support Communities Updates <
    And your point is?  What was the purpose of your post?

Maybe you are looking for

  • SSO with a website using Apache Httpclient form post

    Hi , I am trying to obtain, SS0 with a website, that accepts the user information via post. I tried using app Integrator, but the website sends a cookie in first request, and redirects to another URL. App Integrator is only catching the first respons

  • IPod won't sync my music

    Hi there. I'm not exactly technically savy, and I've hit a wall as far as critically thinking is concerned with this issue. So, I cannot figure out what's wrong with my iPod. I have a 5th Generation iPod and I'm having some problems uploading music.

  • HOW TO translate the address text in smartforms ?

    hi!    I want to translate the address text  from english description to Chinese description in smartforms, could you tell me the detail process about it,  I need your help .    thanks in advance!   regards   yi zhu

  • IPhoto won't recognize my .jpg files from my camera

    I Photo will not recognize my photos when I try to import them from my camera.  I can download on my work mac but not my personal.  I tried to reformat the card and still nothing.  I can however download them from a CDR.  It's the strangest thing!! 

  • Server crash/not starting

    i am new to this tool. I have OBISE, when i try to start the server, the process takes long time and fails,does not start at all. what to do? i have a rpd created and now to want to view answers.