How to select and sum internal table records
Dear Friends
I kindly ask you if we have select statement
if s_mtart = 'z003'
select single pvprs from ckmlcr into ckmlcr-pvprs
where poper EQ s_poper and
kalnr = itab2-kalnr and
bdatj = itab2-bdatj and
curtp = itab2-curtp.
like this how can I calculate how many record it got and I want to get summation of this field(pvprs).And for all poper's must contain.
Please Let me remind you my itab is already open I didn't put any thing for this situation
it seems to be you written this SELECT in a loop. if so,
instead of pushing the values into ckmlcr-pvprs ,create an internal table
data : begin of itab,
pvprs type ckmlcr-pvprs ,
end of itab.
then just after that SELECT SINGLE,
select single pvprs from ckmlcr <b>into ITAB-pvprs</b>
where poper EQ s_poper and
kalnr = itab2-kalnr and
bdatj = itab2-bdatj and
curtp = itab2-curtp.
IF SY-SUBRC = 0.
APPEND ITAB.
here either you can use APPEND OR COLLECT.
If you use COLLECT,all the values will get summed up and final sum will be in the table ITAB-pvprs.
ENDIF.
After all loops your itab will have the totals.
DESCRIBE TABLE ITAB LINES V_LINES.
V_LINES Will have total no of lines.
Regards
srikanth
Similar Messages
-
How to select columns from internal table using 'GUI_DOWNLOAD' ?
Hi,
i am running a report & the fields for output is saved in an internal table which has as many as 10 fields. But I want to select only a few fields for output. There is a option COL_SELECT in function 'GUI_DOWNLOAD'. How to use it. If possible with example.Hai VijayKumar
Try with the following code
tables : mara.
data : begin of it_mara occurs 0,
matnr like mara-matnr,
mbrsh like mara-mbrsh,
mtart like mara-mtart,
meins like mara-meins,
end of it_mara.
parameters : P_mtart like mara-mtart default 'ROH'.
start-of-selection.
perform select_data.
perform download_data.
*& Form select_data
text
--> p1 text
<-- p2 text
FORM select_data .
select
matnr
mbrsh
mtart
meins
from mara into table it_mara
where mtart = p_mtart.
ENDFORM. " select_data
*& Form download_data
text
--> p1 text
<-- p2 text
FORM download_data .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'c:\down.txt'
FILETYPE = 'ASC'
COL_SELECT = 'X'
COL_SELECT_MASK = 'X XX'
TABLES
DATA_TAB = it_mara.
IF SY-SUBRC = 0.
SORT IT_MARA BY MATNR.
ENDIF.
ENDFORM. " download_data
Thanks & Regards
Sreenivasulu P -
How to compare a ztable and an internal table
Hi, experts.
I have a transparent table ztable and an internal table itab, with same fields. What I need to do is: if those records in itab are not existing in ztable, append them to ztable; if these records in itab has been existing in ztable, update them in ztable.
How to write codes to do above task in ABAP program?
Thank you very much.
TomHi
DATA : itab1 type ztable.
if values in itab not in itab1.
append itab values to itab1.
endif.
if values exist in itab and itab1.
modify itab1 with respect to itab
endif.
finally
modify ztable from itab1. -
How to display the Internal table records in table format?
Hi Gurus,
I want to display my print prg internal table records in d appropriate form in a table format, give some solution
with regards
ThambeThere are lot many options to do that
one way is create template in the maikn window and define the line types according to your data cretae text and put your data in the text and go to output options and give the line type to be used . You can also select details option to have lines in your output.
similarly YOU CAN CREATE TABLE IN THE MAIN WINDOW FOR THIS YOU DONT NEED TO DEFINE THE LINE TYPES .
WHEN YOU ARE IN MAIN WINDOW RIGHT CLICK ON TABLE AND GO TO PATH
CREATE -> TABLE
-> TEMPLATE
REWARD IF USEFUL
Regards,
Nageswar -
How to select data from a table using a date field in the where condition?
How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay -
How to select data from a table by passing document number from another tab
How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.SHi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
INTO IT_ADRC
FOR ALL ENTRIES IN IT_DOC
WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
INTO IT_ADRC
WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal -
Refresh internal table records in web dynpro
Hi Guru's
I am facing an issue in web dynpro abap.
in my application there is a button called OPEN.
when i click on open button internal table records should be refreshed.
so i have written code like this
DATA lo_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER .
lo_COMPONENTCONTROLLER = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->clear_info_refresh_visible( ).
but iam getting an error message Method "CLEAR_INFO_REFRESH_VISIBLE" is unknown or PROTECTED or PRIVATE
Could you please help me to how do i activate and refresh the things.
Thanks
Rajuewd.rajue wrote:
Hi Guru's
>
> I am facing an issue in web dynpro abap.
> in my application there is a button called OPEN.
> when i click on open button internal table records should be refreshed.
> so i have written code like this
>
> DATA lo_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER .
>
> lo_COMPONENTCONTROLLER = wd_this->get_componentcontroller_ctr( ).
>
> lo_componentcontroller->clear_info_refresh_visible( ).
>
>
>
> but iam getting an error message Method "CLEAR_INFO_REFRESH_VISIBLE" is unknown or PROTECTED or PRIVATE
>
>
> Could you please help me to how do i activate and refresh the things.
>
> Thanks
> Rajue
Raju,
Please clarify this.
Do you have a method clear_info_refresh_visible in your component controller. I think not.
I am not able to relate your request and coding.
You can simply clear the internal table like this
clear lt_intern_tab[].
If it is a context node then you can bind a empty table to the node to make it empty.
lo_nd_data->bind_table(
new_items = lt_intern_tab
set_initial_elements = abap_true ). -
Best way to declare and use internal table
Hi all,
As per my knoledge there are various techeniques (Methods) to declare and use the internal tables.
Please Suggest me the Best way to declaring and using internal table ( WITH EXAMPLE ).
Please Give the reason as well how the particular method is good ?
What are benefits of particular method ?
Thanks in advance.
Regards
RajHello Raj Ahir,
There are so many methods to declare an internal table.
Mainly I would like to explain 2 of them mostly used.
1. Using Work Area and
2. With header line.
This with header line concept is not suggestable, because, when we shift the code to oops concept.. it doesn't work... Because OOPS doesn't support the Headerline concept...
But it all depends on the situation.
If you are sure that your program doen't make use of the OOPs concept, you can use HEADER LINE concept. If it invols OOPs use WORK AREA concept.
Now I'l explain these two methods with an example each...
1. Using Work area.
TABLES: sflight.
DATA: it_sflight TYPE TABLE OF sflight.
DATA: wa_sflight LIKE LINE OF it_sflight.
SELECT *
FROM sflight
INTO it_sflight
WHERE <condition>.
LOOP AT it_sflight INTO wa_sflight.
WRITE / wa_sflight.
ENDLOOP.
In this case we have to transfer data into work area wa_sflight.
We can't access the data from the internal table direclty without work
area.
*<===============================================
2. Using Header line.
DATA: BEGIN OF it_sflight OCCURS 0,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
END OF it_sflight.
SELECT *
FROM sflight
INTO it_sflight
WHERE <condition>.
LOOP AT it_sflight INTO wa_sflight.
WRITE / wa_sflight.
ENDLOOP.
In this case we can directly access the data from the internal table.
Here the internal table name represents the header. for each and every
interation the header line will get filled with new data. If you want to
represnent the internal table body you can use it_sflight[].
*<======================================================
TYPES: BEGIN OF st_sflight,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
END OF st_sflight.
DATA: it_sflight TYPE TABLE OF st_sflight,
wa_sflight LIKE LINE OF it_sflight.
This is using with work area.
DATA: it_sflight LIKE sflight OCCURS 0 WITH HEADER LINE.
This is using header line.
<b>REWARD THE POINTS IF IT IS HELPFUL.</b>
Regards
Sasidhar Reddy Matli.
Message was edited by: Sasidhar Reddy Matli
Sasidhar Reddy Matli -
How to create an dynamic internal table with the structure of a ddic table
Hi all,
I want to fill ddic-tables (which I already created) in my abap dictionary with data out of CSV-files (which are located on the CRM-Server). The ddic tables have different amount of fields.
I started with creating a table which contains the name of the tables and the path to the matching CSV-file.
At the beginning I'm filling an internal table with part of this data (the name of the ddic-tables) - after that I am looping at this internal table.
LOOP AT lt_struc ASSIGNING <lfs_struc>.
LOOP AT lv_itab1 INTO lv_wa1 WHERE ztab_name = <lfs_struc>.
lv_feld = lv_wa1-zdat_name.
ENDLOOP.
CONCATENATE 'C:\-tmp\Exportierte Tabellen\' lv_feld INTO lv_pfad.
Do.
OPEN DATASET lv_pfad FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
READ DATASET lv_pfad INTO lv_rec.
IF sy-subrc NE 0.
EXIT.
ENDIF.
enddo.
REPLACE ALL OCCURRENCES OF '"' IN lv_rec WITH ''.
SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
INSERT into (<lfs_struc>) values lr_str_value.
CLOSE DATASET lv_pfad.
endloop.
This is not the whole code, but it's working until
SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
I want to split all the data of lv_rec into an internal table which has the structure of the current ddic-table, but I didn't find out how to do give the internal table the structure of the ddic-table. In the code I used an internal tyble type string but I should be the structure of the matching tabel.
If I try to create an internal table by using a fiel symbol, I am told, that the data types are not matching.
Has anyone an idea?Hi Mayari,
though you were successfull with
METHOD cl_alv_table_create=>create_dynamic_table
I must warn you not to use it. The reason is that the number of tables created is limited, the method uses GENERATE SUBROUTINE statement and this triggers an unwanted database commit.
If you know the DDIC structure, it is (starting with ECC6.0) much easier:
field-symbols:
<table> type standard table.
data:
lr_data type ref to data.
Create data lr_data type table of (<DDIC structure>).
assign lr_data->* to <table>.
The split code can be simplified gaining speed loosing complexity not loosing functionality.
field-symbols:<fs_s> type any.
field-symbols:<fs_t> type any.
SPLIT lv_rec AT ';' INTO table it_string.
loop at it_string assigning <fs_s>.
assign component sy-tabix of wa_string to <fs_t>.
if sy-subrc = 0.
<fs_t> = <fs_s>.
endif.
at last.
append <fs_itwa3> to <ft_itab3>.
endat.
endloop.
Though it may work as Keshav.T suggested, there is no need to do that way.
Regards,
Clemens -
*How can we use the internal table in module pool programming? Clarify plz*
If we creating a screen using the table having four fields(for e.g.). The screen has the functions of display, modify, delete, save, exit etc for the fields. The front-end of the screen having I/O fields of the table using internal table. How can we declare the internal table in the screen?
HI,
Create one WA for your Internal table and then map it to your fields.
For Example,
Data : begin of wa,
name(10),
age type i,
end of wa.
data : it like table of wa with header line.
Then in screen create input fields with the name, age and ***.
Then the user entered values are stored in name age and ***.
then you can manipulate with that values using wa.
Thanks. -
Can we apply select statement on internal table.
can we apply select statement on internal table.if yes thrn let me know how to do.
Dear Sachin,
You cannot use SELECT statement on internal table.
If you want to select some rows from internal table you can LOOP the table or you can READ the table.
<u>Please check the following links for your kind reference:</u>
<b>http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
http://www.sap-img.com/ab009.htm
http://www.itsmarc.com/crs/Clas0302.htm
http://www.sapdevelopment.co.uk/tips/tips_itab.htm
http://searchsap.techtarget.com/search/1,293876,sid21,00.html?query=whatisinternaltable&bucket=ALL</b>
Cheers !
Moqeeth. -
Creation of Sorted and Standard and Hashed Internal Tables ..
Hi ..
Pls specify me.. how to create .. sorted ,Standard and Hashed Internal Tables...
pls give me the full code regarding ...this ..
ThnksStandard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
Special Features of Standard Tables
Unlike sorted tables, hashed tables, and key access to internal tables, which were only introduced in Release 4.0, standard tables already existed several releases previously. Defining a line type, table type, and tables without a header line have only been possible since Release 3.0. For this reason, there are certain features of standard tables that still exist for compatibility reasons.
Standard Tables Before Release 3.0
Before Release 3.0, internal tables all had header lines and a flat-structured line type. There were no independent table types. You could only create a table object using the OCCURS addition in the DATA statement, followed by a declaration of a flat structure:
DATA: BEGIN OF <itab> OCCURS <n>,
<fi> ...
END OF <itab>.
This statement declared an internal table <itab> with the line type defined following the OCCURS addition. Furthermore, all internal tables had header lines.
The number <n> in the OCCURS addition had the same meaning as in the INITIAL SIZE addition from Release 4.0. Entering 0 had the same effect as omitting the INITIAL SIZE addition. In this case, the initial size of the table is determined by the system.
The above statement is still possible in Release 4.0, and has roughly the same function as the following statements:
TYPES: BEGIN OF <itab>,
<fi> ...,
END OF <itab>.
DATA <itab> TYPE STANDARD TABLE OF <itab>
WITH NON-UNIQUE DEFAULT KEY
INITIAL SIZE <n>
WITH HEADER LINE.
In the original statement, no independent data type <itab> is created. Instead, the line type only exists as an attribute of the data object <itab>.
Standard Tables From Release 3.0
Since Release 3.0, it has been possible to create table types using
TYPES <t> TYPE|LIKE <linetype> OCCURS <n>.
and table objects using
DATA <itab> TYPE|LIKE <linetype> OCCURS <n> WITH HEADER LINE.
The effect of the OCCURS addition is to construct a standard table with the data type <linetype>. The line type can be any data type. The number <n> in the OCCURS addition has the same meaning as before Release 3.0. Before Release 4.0, the key of an internal table was always the default key, that is, all non-numeric fields that were not themselves internal tables.
The above statements are still possible in Release 4.0, and have the same function as the following statements:
TYPES|DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE DEFAULT KEY
INITIAL SIZE <n>
WITH HEADER LINE.
They can also be replaced by the following statements:
Standard Tables From Release 4.0
When you create a standard table, you can use the following forms of the TYPES and DATA statements. The addition INITIAL SIZE is also possible in all of the statements. The addition WITH HEADER LINE is possible in the DATA statement.
Standard Table Types
Generic Standard Table Type:
TYPES <itab> TYPE|LIKE STANDARD TABLE OF <linetype>.
The table key is not defined.
Fully-Specified Standard Table Type:
TYPES <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE <key>.
The key of a fully-specified standard table is always non-unique.
Standard Table Objects
Short Forms of the DATA Statement :
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>.
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH DEFAULT KEY.
Both of these DATA statements are automatically completed by the system as follows:
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE DEFAULT KEY.
The purpose of the shortened forms of the DATA statement is to keep the declaration of standard tables, which are compatible with internal tables from previous releases, as simple as possible. When you declare a standard table with reference to the above type, the system automatically adopts the default key as the table key.
Fully-Specified Standard Tables:
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE <key>.
The key of a standard table is always non-unique.
Internal table objects
Internal tables are dynamic variable data objects. Like all variables, you declare them using the DATA statement. You can also declare static internal tables in procedures using the STATICS statement, and static internal tables in classes using the CLASS-DATA statement. This description is restricted to the DATA statement. However, it applies equally to the STATICS and CLASS-DATA statements.
Reference to Declared Internal Table Types
Like all other data objects, you can declare internal table objects using the LIKE or TYPE addition of the DATA statement.
DATA <itab> TYPE <type>|LIKE <obj> WITH HEADER LINE.
Here, the LIKE addition refers to an existing table object in the same program. The TYPE addition can refer to an internal type in the program declared using the TYPES statement, or a table type in the ABAP Dictionary.
You must ensure that you only refer to tables that are fully typed. Referring to generic table types (ANY TABLE, INDEX TABLE) or not specifying the key fully is not allowed (for exceptions, refer to Special Features of Standard Tables).
The optional addition WITH HEADER line declares an extra data object with the same name and line type as the internal table. This data object is known as the header line of the internal table. You use it as a work area when working with the internal table (see Using the Header Line as a Work Area). When you use internal tables with header lines, you must remember that the header line and the body of the table have the same name. If you have an internal table with header line and you want to address the body of the table, you must indicate this by placing brackets after the table name (<itab>[]). Otherwise, ABAP interprets the name as the name of the header line and not of the body of the table. You can avoid this potential confusion by using internal tables without header lines. In particular, internal tables nested in structures or other internal tables must not have a header line, since this can lead to ambiguous expressions.
TYPES VECTOR TYPE SORTED TABLE OF I WITH UNIQUE KEY TABLE LINE.
DATA: ITAB TYPE VECTOR,
JTAB LIKE ITAB WITH HEADER LINE.
MOVE ITAB TO JTAB. <- Syntax error!
MOVE ITAB TO JTAB[].
The table object ITAB is created with reference to the table type VECTOR. The table object JTAB has the same data type as ITAB. JTAB also has a header line. In the first MOVE statement, JTAB addresses the header line. Since this has the data type I, and the table type of ITAB cannot be converted into an elementary type, the MOVE statement causes a syntax error. The second MOVE statement is correct, since both operands are table objects.
plz reward if useful -
How to select data from cluster table
hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
maniHi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards. -
How would you order an internal table e.g. itab according a specific field
Hello
How would you order an internal table e.g. itab according a specific field?
Would you be so kind and let me see an mini example
Thank you in advanceHi Tina,
You can sort the table as already mentioned, or if you want it always kept in a key sequence you could define it as a sorted table something like this:
types:
begin of itabline,
field1 type c,
field2 type n,
field3 ....
end of itabline.
DATA itab TYPE sorted table of itabline WITH UNIQUE key field1.
You can then insert and read entries by the key fields.
Hope that helps as an option!
Robin -
Help on Delete Internal table records
Hi,
I have a internal table with some records in it.
I need to delete the contents of this based on the condition as below.
if product_search-Resp_product_company is not initial.
SORT i_equi BY zzrefeng.
DELETE i_equi WHERE zzrefeng <> product_search-Resp_product_company.
endif.
when i execute this all the records are getting deleted irrespective of the condition mentioned.
Can anyone help me on this.
Regards,
RamHi,
Need to delete the records if <b>ZZREFENG</b> does not have the value of <b>product_search-Resp_product_company</b> .
Here I have product_search-Resp_product_company value as FI14. And also the internal table contains some records with ZZREFENG = FI14.
I need to delete the internal table records if ZZREFENG <> FI14. But when i execute the statement it is deletng all the records even ZZREFENG = FI14 records also.
Regards,
Ram
Maybe you are looking for
-
How do I configure Mountain Lion's Mail program to accept an Exchange server delegate account?
I am running the latest version of Mountain Lion and use Mac Mail as my email program. Recently, I was given access to a shared email account on our Exchange server using "delegate" status. While my normal Exchange email was easy to set up, I canno
-
Streaming XML file content to a HTTPS servlet..
Hi, I want to stream the contents of a XML file , which I have generated through XDK for PL/SQL, to a HTTPS address for a servlet. This HTTPS connections uses certifcates for user authentication. I have the certifcate on my local machine. Is there an
-
Call Documentum from Oracle EBS
Hi All, Customers wants to see some documents from Documentum on EBS web pages. We will use R12 and 10gR2 for database but i'm still don't know which version of Documentum. From my point of view, the best approach is to use Web Services capabilities
-
Grey screen on startup after Yosemite 10.10.3 update
Hello everybody, I need your help guys, I've just updated my MacBook Pro(15" mid-2010) OS X to Yosemite 10.10.3. everything seems to be ok and work normally except that when I turn the laptop on, it's a little bit slow on startup and the screen is gr
-
Premiere Pro Timeline with 3 video channels and 4 audio channels, when clip dragged onto timeline audio channels change to 8 channels. Audio track mixer changes too. I edit undo to remove dragged clip and it reverts back to 4 channels of audio on tim