How to select from 3 Ip network cameras

Hi, I have previously used flash media live encoder to encode live streaming in flv and upload it to a web space provided from one or more analog cameras selecting manually at the input of a capture video card. Now, I wish to not stop the encoding select between 3 video streams input from three network cameras. Is it possible to have three windows with the 3 videos and send from a choice of three video streams without stopping the encoding to provide a live stream? Hopefully, which product to use?

Hi,
Unfortunately, FMLE does not currently have the dynamic switching feature outlined above.
Thanks,
Shiven

Similar Messages

Video Streaming from a network camera!

Hi,
Does anybody have an idea how to go about streaming video from a network camera using applets? I know its possible in JMF, but I was wondering if its possible without that because I guess it needs the user to install JMF. Or a way with JMF but total platform independent?
PLZ.

i am not sure about the archive stuff neither am i very good at java. I am just a trainee here and wa given this task. so I went up searching on google, found these sites and then when I wasnt able to run the applet, I researched about running jmf applet. the setting classpath and stuff is given in the jmf website and even an aaplet which tests if jmf is installed on your system. I was just trying to act as one of the users trying to run the application. i was just trying to find an easier way out but guess there isn't.
now if anybody of you would know how go about getting a video steam from the IP camera using JMF?

How to Select from Oracle 8i database and insert into Sql Server 2005 datab

Hi how to Select from Oracle 8i and insert into Sql Server 2005.
Source db as Oracle 8i
Target db as Sql Server 2005.
I need to select one table data from Oracle 8i & insert into Sql Server 2005
Thanks

Thanks Khan..
Is there is any query (OPENQUERY) available for that?
Regards..

How to select from list of values?

Dear All,
I am using XML publisher for word, where I need to select a value from a list of values, for example I have hotel code like TTAG,TOBBR,TTAG,TOTM now I need
to select hotel code and the corrosponding data should be display on word after
running the RTF. Tell me, how can I achive the same?
hare krishna
Alok

Thanks prety much,I am using XML to upload data from there into RTF templete. I've already insert table through load data option, but my problem is, how could I select a value from a list of values and based on that value selected from the list, it should displaydata corrosping to it. For example, I have few codes like TTAG, AMAG, TOTOM and if I select TOTM, it should display the complete address of that hotel named TOTM. If above given scenario is not at all possible, then Is there any alternate method to achieve this?
hare krishna
Alok

How to select from a stored procedure?

Lets say I have a simple stored procedures
Create Procedure stp_test
As
Begin
Select * from tbl1
End
Go
I would like to be able to do this in SSMS (actually, I want to do this from ADODB)
Select top 10 * from ...stp_test... Order By rowID
It looks like I want to use OpenQuery on the stored Procedure, but I have not been able to do it correctly. How can I query my stored procedure?
Rich P

It looks like I want to use OpenQuery on the stored Procedure, but I have not been able to do it correctly. How can I query my stored procedure?
If you want to use the OPENQUERY method , use the following.. follow this link...
http://stackoverflow.com/questions/209383/select-columns-from-result-set-of-stored-procedure
Please mark as answer, if this has helped you solve the issue.
Good Luck :) visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How to select from multiple addresses of account in IC Web Client

Hi all,
We are implementing a B2C scenario for IC Web Client. We have customers with multiple addresses. However, when we search the acount, only standard address comes to screen. We want to be able select the related address, and then confirm the acount with that address.
Is there any way to customize the Web Client in order to be able to select from multiple addresses of the acount?
Thanks in advance.
Edited by: Danisman Danisman on Aug 31, 2010 2:52 PM

Thanks for the answer. Yes, we are using 7.0 but in the account identification screen, there is no personalize button ( I assume you are suggesting adding an addres block by using that button, right?).
We checked the necessary customizing : there is an entry for fucntional profile PERSONALIZATION : ALL_ENABLED.
Should we do something else to show the button?
Thanks again.

How do I access a network camera from internet via 501

Please understand that I am nowhere near being a network guru and I'm even farther away from being a PIX guru.
I have a 501 PIX between my home network and the outside internet. The PIX is connected to a cable modem and pretty much keeps the same DHCP IP address as assigned by the ISP. I have an AXIS 207 IP camera connected to my home network on IP 192.168.1.11. For the sake of illustration say the address assigned by my cable ISP is 123.123.123.1.
What I need to do is to access the camera from the internet. To do that I suppose I need to add some instructions to the PIX configuration but I don't know where to start...I have never even thought about communicating with devices on my home network through the internet. Can someone please provide some pointers or better yet the commands I need to add. The next question is how do I access the camera assuming the PIX is all set up. I don't think I use the camera's address and I don't know how the ISP address would get to a specific device such as the camera - maybe appending a port number or whatever to the IP address I type when trying to access the camera from the internet?
The way the camera works on the internal network is you type in it's IP address in a browser window and the camera opens up a web page just like any url and the video is streamed to a window in the web page.
I hope I've provided enough info to understand what I'm trying to do and I would be most appreciative for any help.
thanks

I tried installing the commands as provided but am running into issues. Here are the error messages:
pixfirewall(config)# nat (inside) 1 0.0.0.0
ERROR: Duplicate NAT entry
ERROR: fail to insert nat entry
pixfirewall(config)# global (outside) 1 xxx.xxx.114.55
ERROR: xxx.xxx.114.55-xxx.xxx.114.55 overlaps with outside interface address
pixfirewall(config)#
And here is a copy of my current configuration (including the code prior to entering the changes and the successful changes). Any Idea what needs to be done to fix things?
thanks
Building configuration...
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxx
passwd xxx
hostname pixfirewall
domain-name ciscopix.com
clock timezone CST -6
clock summer-time CDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 100 permit icmp any any echo-reply
access-list 100 permit icmp any any time-exceeded
access-list 100 permit icmp any any unreachable
access-list inbound permit tcp any host xxx.xxx.114.55 eq www
pager lines 24
logging timestamp
logging trap informational
logging host inside 192.168.1.3
icmp deny any echo outside
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.1.3 255.255.255.255 inside
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp xxx.xxx.114.55 www 192.168.1.11 www netmask 255.255.255.255 0 0
access-group inbound in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
aaa authentication http console LOCAL
aaa authentication telnet console LOCAL
aaa authentication serial console LOCAL
aaa authentication enable console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 15
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.6-192.168.1.10 inside
dhcpd dns 207.69.188.171 207.69.188.172
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username administrator password xxx privilege 15
terminal width 80
Cryptochecksum:xxx
: end
[OK]

How to select from drop-down menu connected to SQL database and then autofill?

Hello,
I am in the process of creating a series of forms and I need some help if working out how to do the following.
I have already set up a data connection to an SQL database, and I have three fields connected: Job Number, Job Name and Customer Name.
What I want to do is have it so that the Job Number is a dropdown box, so they can select the number, and then the other two fields, Job Name and Customer Name, are autofilled to the information corresponding to the Job Number.
Is anyone able to help me do this please??
Thank you!!

The 101 of database connections from LiveCycle Designer can be found in Stefan Camerons blog.
This is the right place to start.
http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/
http://forms.stefcameron.com/2006/12/18/databases-inserting-updating-and-deleting-records/
http://forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
http://forms.stefcameron.com/2006/10/12/displaying-all-records-from-an-odbc-data-connectio n/

How to select from multiple output tables in the SAP Data Source

Hi,
We're using the SAP Data Source to display SAP data in our portal from the Bapi: BAPI_INFORECORD_GETLIST. When defining the Bapi Meta Data we can select data from one of the two output tables (INFORECORD_GENERAL and INFORECORD_PURCHORG). But we want to select data from both tables (some columns we want to show are in INFORECORD_GENERAL and some are in INFORECORD_PURCHORG) .
How can we do this ?
With regards,
Ramon van der Weiden

You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
Susan

How do u enter BIOS setup in M200? or how to boot from a network?

I tried many key but it only halt booting up and let me choose booting device.
And how do u boot from network option?
i need to restore my laptop but haven't got a dvdrom drive...

Hi
If you want check please this site http://www.toshiba-europe.com/eu/contact/details.asp?group=By+Country . Choose your country and there you can find all necessary addresses. If you need address of authorized service partner in your country you can find it on
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

How to select a profile in Camera Raw

When I try and open a raw image from Bridge in CS5 the raw image open file section comes up - but when i try and enable lens correction I cannot see the profile I have created. But if I then open the image into photoshop CS5 and go to lens correction filter my new profile can be found!!

Was your hand-crafted profile created from DNGs or JPGs?
Lens profiles can be of type RAW or Developed (JPG, etc) and ACR and LR, being primarily RAW editors, enforce not using RAW profiles for JPGs and not using JPG profiles with RAWs. This is due to, in part, the in-camera-processing for JPGs changing what the corrections need to be, especially for small things like CA, but some cameras actually do some or all the corrections before creating JPGs and those profiles would not work at all with RAW files.
Photoshop, having no capacity to do RAW outside of ACR, allows both types of profiles to be used with "Developed" files, leaving it up to the user to make sure they are using things appropriately.

How to select from multiple tables which reside on different data stores ?

Suppose I have two data stores in one TimesTen instance:
1) Datastore A:
table1
2) Datastore B:
table2
I want to make a query like this:
select ... from table1, table2 where table1.colA = table2.colB
Can I ? If not, is there a workaround ?
BTW, because of business, we have to use two or more different datastores, so we can not put table1/table2 in the same datastore.
Thanks very much.

You can query multiple TimesTen databases, but your original question was about joining tables from two databases, which is not supported.
Using Cache Connect to Oracle to query an Oracle database is not distributed. It's still one single Oracle database you are querying. You cannot join a table in the TimesTen database with a table in the Oracle database, this is not allowed.
If you are willing to share your business requiremens, we can take a look and see what solution might work for you. Would you like to discuss this offline?
Susan

How to SELECT * FROM varchar2 variable

Hi there!
I want to create a SELECT statement inside a FOR LOOP. With each loop iteration, this SELECT shall get data from a different table:
FOR R_CURSOR IN C_CURSOR LOOP
V_FROM_CLAUSE := R_CURSOR.TABLE;
SELECT *
INTO V_RESULT
FROM V_FROM_CLAUSE:
Obviously, this doesn't work (it might be possible that a table/view has exactly the name as the variable). But is there any possibility to create a statement like this? Please help me out :-)
Regards,
Thomas

you need dynamic sql:
EXECUTE IMMEDIATE
'SELECT * INTO V_RESULT FROM ' || V_FROM_CLAUSE

How 2 select FA virtual Cam in Skype

how 2 select a FA virtual Cam in Skype

I am not sure what your question is.
Information on how to configure your system
to use the Oracle JVM appears in the
help files and in the ReadMe (release notes).
The Oracle JVM supports JDK 1.2.2 only.
If you need to, post another question more clearly.
I hope this helps,
John - JDeveloper Team

How does Distribution/collection from a network folder work?

I sorry if this has been asked before, but i need a basic understanding of how Distribution/collection from a network folder works. To give you an idea what I need, i'll tell you that Arcobat 9 was purchased by a couple people at work, and they are asking me to figure this out. I'm a web guy and know enough about pdf's to throw one on a web server and put a link to it somewhere. I don't know anything about Acrobat otherwise.
So, If someone can give me a basic overview of how this works, I would really appreciated it. I'm assuming that Acrobat sets up some kind of email server on the user's computer and has a database in it some where.
Thanks

Jan,
I have attached a simple example that uses "Basic Level Trigger Detection.vi" found in the Analyze->Waveform Monitoring menu. You can change the slope from rising to falling edge to note the change in the result.
I was unable to find the "Simple Trigger Detection.vi" that is giving you trouble. If you would like you can attach a piece of code that replicates your problem. Please make sure to include all subvi's in the attachment (including the Simple Trigger Detection.vi). I can take a look to see what is going on.
Thanks.
Matt Kisler
Applications Engineer
National Instruments
http://www.ni.com/ask
Attachments:
8889.vi ‏36 KB

How to select from 3 Ip network cameras

Similar Messages

Maybe you are looking for