How to select multiple AP invoice lines

Hi all,
In my AP invoice, I have many lines.
And I would like to select some lines in order to discard them.
But it seems that it is not possible. I tried to do that with <SHIFT> + select each line but it doesn't work.
Thanks for your help !
Tina

I forgot to say that this is for R12 !

Similar Messages

  • How to select multiple lines in reports

    Hi,
    how to select multiple lines in a reports and process those selected lines to other activities like BDC.
    Please paste sample report here. or any demo examples . (don't paste ALV report , paste only classical report)
    suppose there are 10 records in output, i want to select 3 records and process other activities like bdc.
    Point will awarded.

    Hi ,
    the o/p in ur case will be a basic list output with a check box enabled in the left .
    Now say there are 10 records in the list output and i have checked 3 of them where checkboxes are enabled .
    And i press a button to submit this to the BDC .
    Here u need to make use of
    READ LINE statement to read the records from the list output and then pass them to the BDC .
    The code would be something like this
    DO .
    Read line index <field> where checkbox <> ' '.
    ENDO.
    You can have a look at the F1 help on read line . This will mkae u clear .
    Hope this gives u an idea.
    Regards,
    Vijay.

  • How to select multiple row in ALV report

    Hi friends,
    1. How to select multiple row in ALV report
                   ( How to set tab in ALV report and want to select multiple line.)
    Thanking you.
    Subash

    Hi Sahoo,
    If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
    in layout structure you will find field SEL_MODE
    pass :
    LS_LAYOUT-SEL_MODE = 'A'.
    In PAI.
      CALL METHOD GRID->GET_SELECTED_ROWS
        IMPORTING
          ET_INDEX_ROWS = T_ROWS
          ET_ROW_NO     = T_ROWID.
    Hope these will solve your problem.
    Regards,
    Kumar M.

  • How to select multiple values from a listbox

    Hi,
    I have a list box on my UI which is not allowing me to select multiple values
    I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
    When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
    I am working on Jdev 11.1.1.3 and I am using ADF/BC components
    How to select multiple values from a listbox ?
    Thanks,

    Hi,
    I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
    And what is the error ?
    Frank

  • How to select multiple values from the parameters in BI Publisher report

    How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

    Hi kishore,
    I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
    Iam able to get the results when I am selecting one value..
    and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
    ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
    1.Single selection.
    2.Multiple selection.
    3.'ALL' Values.
    4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
    Ex:
    Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
    Expected Output on the report:ACCOUNT,HR,SALES
    reply to this would be much appreciated....
    thanks,
    manoj

  • How to select multiple values from the Parameters in the concurrent program

    How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

    I think there's no way to do that using standard feature.
    Some workaround I use :
    1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
    Selection1 : <choose first selection>
    Selection2: <choose 2nd selection>
    ..etc.
    If you don't use it then leave it empty.
    2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

  • How to select multiple records from a TREE in the table

    HI,
    I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
    Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
    Regards
    -Sandip

    Rashmi/Kukku,
    First of all, Thanks for your help!
    Is there any other way in which we can access tables other than using BAPIs or RFCs?
    In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
    Krishna Murthy

  • How to select multiple recipients in iPad mail

    I have read that I can't create groups, but how to select multiple recipients in iPad mail?
    I was looking for this when setting up for two new people who are going to have the iPad as their only device.. and they do need to email a bunch of people at once..
    I was sending out the 'I have a new email address' BCC for them.
    Thanks.

    You can select multiple contacts by tapping on the + sign in the upper right corner in the To: field when you are typing a new email. Just keep tapping the + sign and your contacts will pop up in a window. Select the contact that you want to add, repeat the process in order to add as many recipients as you want.
    There are other mail apps that let you creat groups and email to those groups.
    https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?l=es&mt=8
    https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    I am sure there are other, but those are two that I know of.

  • Does anyone know how to select multiple files in photoshop cs6 on macbook pro lion

    I'm new to Mac operating system. Can anyone tell me how to select multiple images in cs6 photoshop? Without having to hold down a shift or cmd key and clicking on each one.

    I assume you are using the Shape tool to draw your hexagons. After you drag out the shape, use the Transform controls to tweak the size, so that the width is evenly divisible by 4, and the height is an even number. If you wand a gap between shapes, include that in your adjustments. Make a note of the new width and height.
    Once the scaling is committed and the shape is selected, Control+Alt+T to Free Transform Copy, and in the Option Bar, set the X and Y to Relative. Set X to zero, and Y to the height you set earlier, and commit the Transform. Then Repeatedly press Shift+Control+Alt+T to make more transformed copies.
    With a vertical column of shapes, Alt-Click on the Shape Path in the Paths panel to select the whole path. Control+Alt+T again. This time, again using relative, set X to three-quarters of the width you noted earlier, and Y to one-half the height, and commit
    Finally, again Alt-click on the Shape Path in the Paths panel, and Transform Copy relative with X = one and a half times the width you noted, and Y to zero. After committing this, Shift+Control+Alt+T as above to extend more columns.
    And JJ, those are Octagons .

  • How to select multiple clips???

    I am a very avid iMovie user and now this new version has me so confused. I have the basics down, but I can't figure out how to select all clips and dump them into the "timeline" area. I can select them one at a time and place them in the assembly area but that takes forever on a one hour soccer game. Anyone figure out how to select multiple clips or all clips at once?
    Thanks ahead of time.

    Weird seeing this question today after I dealt with this yesterday. I did a movie yesterday that was multiple clips. I was able to select all clips at once and drag the entire thing up to the top window. I just tried to do the same thing again after reading this question and for the life of me, it will no longer allow me to click and drag to select them all. I wonder if this has something to do with the fact that all 10 or so clips I was able to highlight before, were all parts of the same clip when filmed (they were split into individual segments when imported). When I try to combine two clips that are not filmed sequentially, it will no longer allow it. The help menu says nothing about this. All it says is you need to click on the first clip and hold the mouse down and drag it to the end and it will select all. That is not working.

  • How to select Multiple items in the dvt:pivotfilterbar?

    How to select Multiple items in the filters in the dvt:pivotfilterbar?

    To select multiple media and other files, it's not possible. You can do so in messages as directed.
    To select multiple files, connect to your PC and select them.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to select multiple items in ListView?

    Is it possible to select multiple items (rows) in ListView? I'm able
    to select only one item at a time.
    I'm running Forte 30F2 on Windows NT 4.0.
    Thanks in advance,
    Ramarao
    Get Your Private, Free Email at http://www.hotmail.com

    Ramarao,
    I talked to Forte support about this recently and they had nothing but
    bad news.
    They said that you cannot select multiple rows in a listview, and that
    this is a
    feature that will be in the next release ( release 4 ).
    I then asked if it was possible for me to highlight a row manually ( and
    do the multiple
    select myself ), and they said that also wasn't possible. This is due
    to the fact that
    there are no displaynode properties that effect display attributes (
    like font or color ).
    They suggested that I try changing the smallicon to show rows that have
    been 'selected'.
    In other words, when you ctrl-click on any particular row, you could put
    an icon at the
    beginning of a row that shows that this row has been clicked on.
    I'm still working on this myself, so I will keep you posted.
    Jeff Pickett
    From: Ramarao P[SMTP:[email protected]]
    Reply To: Ramarao P
    Sent: Tuesday, March 24, 1998 6:22 PM
    To: [email protected]
    Subject: How to select multiple items in ListView?
    Is it possible to select multiple items (rows) in ListView? I'm able
    to select only one item at a time.
    I'm running Forte 30F2 on Windows NT 4.0.
    Thanks in advance,
    Ramarao
    Get Your Private, Free Email at http://www.hotmail.com

  • How to  select multiple chek in checkbox in alv

    how to  select multiple chek in checkbox in alv

    Hi,
    Following report is the checkbox alv sample report.
    REPORT  YMS_CHECKBOXALV.
    TYPE-POOLS: slis.
    DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
    DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
    DATA: s_layout TYPE slis_layout_alv.
    DATA: BEGIN OF itab OCCURS 0,
    icon TYPE icon-id,
    vbeln TYPE vbeln,
    kunnr TYPE kunnr,
    erdat TYPE erdat,
    box TYPE c,
    END OF itab.
    DATA: v_repid TYPE syrepid.
    START-OF-SELECTION.
    Get the data.
    SELECT vbeln kunnr erdat UP TO 100 ROWS
    FROM vbak
    INTO CORRESPONDING FIELDS OF TABLE itab.
    IF sy-subrc <> 0.
    MESSAGE s208(00) WITH 'No data found'.
    LEAVE LIST-PROCESSING.
    ENDIF.
    Modify the record with red light.
    itab-icon = '@0A@'.
    MODIFY itab TRANSPORTING icon WHERE NOT vbeln IS initial.
    v_repid = sy-repid.
    Get the field catalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '1'.
    s_fieldcatalog-fieldname = 'ICON'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-seltext_l = 'Status'.
    s_fieldcatalog-icon = 'X'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '2'.
    s_fieldcatalog-fieldname = 'VBELN'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-rollname = 'VBELN'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '3'.
    s_fieldcatalog-fieldname = 'KUNNR'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-rollname = 'KUNNR'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '4'.
    s_fieldcatalog-fieldname = 'ERDAT'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-rollname = 'ERDAT'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    Set the layout.
    s_layout-box_fieldname = 'BOX'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    i_callback_program = v_repid
    is_layout = s_layout
    i_callback_pf_status_set = 'SET_PF_STATUS'
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat = t_fieldcatalog[]
    TABLES
    t_outtab = itab.
    FORM SET_PF_STATUS *
    --> EXTAB *
    FORM set_pf_status USING extab TYPE slis_t_extab.
    SET PF-STATUS 'TEST2'.
    ENDFORM.
    FORM user_command *
    --> UCOMM *
    --> SELFIELD *
    FORM user_command USING ucomm LIKE sy-ucomm
    selfield TYPE slis_selfield.
    Check the ucomm.
    IF ucomm = 'DETAIL'.
    LOOP AT itab WHERE box = 'X'.
    itab-icon = '@08@'.
    MODIFY itab TRANSPORTING icon.
    ENDLOOP.
    ENDIF.
    selfield-refresh = 'X'.
    ENDFORM.
    Thanks,
    Sankar M

  • How to select multiple lines in ALV report

    hi gurus,
    I am working on an interactive ALV report where i have to select multiple lines from the basic list into an internal table, based on check box clicks. Using RS_SELFIELD i can select only 1 row. The coding has been done based on Call Function. Can u please suggest some way.
    Regards,
    Satyajit

    hi,
    try like this
    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    TYPES: BEGIN OF t_ekko,
      sel,                         "stores which row user has selected
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          fieldcatalog1 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE slis_layout_alv,
          gd_repid     LIKE sy-repid.
    DATA : BEGIN OF det_tab OCCURS 0,
            ebeln LIKE ekpo-ebeln,
           END OF det_tab.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
    *       Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-do_sum      = 'X'.        "Display column total
      fieldcatalog-datatype     = 'CURR'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    *       Build layout for ALV grid report
    FORM build_layout.
      gd_layout-box_fieldname     = 'SEL'.
      "set field name to store row selection
      gd_layout-edit              = 'X'. "makes whole ALV table editable
      gd_layout-zebra             = 'X'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
    *       Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = gd_repid
          i_callback_user_command  = 'USER_COMMAND'
          i_callback_pf_status_set = 'SET_STAT'
          is_layout                = gd_layout
          it_fieldcat              = fieldcatalog[]
          i_save                   = 'X'
        TABLES
          t_outtab                 = it_ekko
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
    *       Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO CORRESPONDING FIELDS OF TABLE it_ekko.
    ENDFORM.                    " DATA_RETRIEVAL
    *       FORM USER_COMMAND                                          *
    *       --> R_UCOMM                                                *
    *       --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    * Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
          IF rs_selfield-fieldname = 'EBELN'.
            READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
            SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
            CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
          ENDIF.
        WHEN 'DET'.  "button add by me
          CLEAR det_tab.
          REFRESH det_tab.
          LOOP AT it_ekko INTO wa_ekko WHERE sel = 'X'.
            MOVE-CORRESPONDING wa_ekko TO det_tab.
            APPEND det_tab.
          ENDLOOP.
          PERFORM build_cat.
          PERFORM dis_data.
      ENDCASE.
    ENDFORM.                    "user_command
    *&      Form  set_stat
    *       text
    *      -->RT_EXTAB   text
    FORM set_stat USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
    ENDFORM.                    "set_stat
    *&      Form  build_cat
    *       text
    FORM build_cat.
      CLEAR fieldcatalog1.
      REFRESH fieldcatalog1.
      fieldcatalog1-fieldname = 'EBELN'.
      fieldcatalog1-tabname = 'DET_TAB'.
      fieldcatalog1-seltext_m = 'Order No.'.
      fieldcatalog1-outputlen = 10.
      APPEND fieldcatalog1 TO fieldcatalog1.
      CLEAR fieldcatalog1.
    ENDFORM.                    "build_cat
    *&      Form  dis_data
    *       text
    FORM dis_data.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = 'ZTEST_DS'
          it_fieldcat        = fieldcatalog1[]
          i_save             = 'X'
        TABLES
          t_outtab           = det_tab.
    ENDFORM.                    "dis_data
    here i have copied standard gui status of ALV into my z status ZSTAT and add one button DET......
    here u can select morethan one line using control(ctrl)
    reward if usefull...

  • How to select multiple data without select options?

    Dear experts,
    I have a rquirement that i have a one selection screen and in that selection screen on date field is there which is parameter type. we using this parameter date field in the program for selecting data..after that i am using the logic to multiple value..now my requirement is how to select the data for multiple value..
    PARAMETERS :  SO_DATE TYPE SY-DATUM OBLIGATORY.
    CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
       EXPORTING
         DATE            = so_date
         DAYS            = 1
         MONTHS          = 0
         SIGNUM          = '-'
         YEARS           = 0
       IMPORTING
         CALC_DATE       = so_date
          l_cm_first+0(6) = so_date+0(6). " month & year
          l_cm_first+6(2) = '01'. " date
          l_cm_end = so_date.
    my requirement is that how to use l_cm_first and  l_cm_end multiple selection in select query ??
    eg- i want to fetch the data from 1/8/2014 to 11/08/2014 using this field l_cm_first and  l_cm_end

        l_cm_first+0(6) = so_date+0(6). " month & year
          l_cm_first+6(2) = '01'. " date
          l_cm_end = so_date.
    after executing this line l_cm_first = 1/8/2014 and  l_cm_end = 11/08/2014
    now i have to select in this range how to do it?

Maybe you are looking for