How to select multiple chek in checkbox in alv

how to select multiple chek in checkbox in alv

Hi,
Following report is the checkbox alv sample report.
REPORT YMS_CHECKBOXALV.
TYPE-POOLS: slis.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
DATA: s_layout TYPE slis_layout_alv.
DATA: BEGIN OF itab OCCURS 0,
icon TYPE icon-id,
vbeln TYPE vbeln,
kunnr TYPE kunnr,
erdat TYPE erdat,
box TYPE c,
END OF itab.
DATA: v_repid TYPE syrepid.
START-OF-SELECTION.
Get the data.
SELECT vbeln kunnr erdat UP TO 100 ROWS
FROM vbak
INTO CORRESPONDING FIELDS OF TABLE itab.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'No data found'.
LEAVE LIST-PROCESSING.
ENDIF.
Modify the record with red light.
itab-icon = '@0A@'.
MODIFY itab TRANSPORTING icon WHERE NOT vbeln IS initial.
v_repid = sy-repid.
Get the field catalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'ICON'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-seltext_l = 'Status'.
s_fieldcatalog-icon = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'KUNNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'ERDAT'.
APPEND s_fieldcatalog TO t_fieldcatalog.
Set the layout.
s_layout-box_fieldname = 'BOX'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
is_layout = s_layout
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = t_fieldcatalog[]
TABLES
t_outtab = itab.
FORM SET_PF_STATUS *
--> EXTAB *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'TEST2'.
ENDFORM.
FORM user_command *
--> UCOMM *
--> SELFIELD *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
Check the ucomm.
IF ucomm = 'DETAIL'.
LOOP AT itab WHERE box = 'X'.
itab-icon = '@08@'.
MODIFY itab TRANSPORTING icon.
ENDLOOP.
ENDIF.
selfield-refresh = 'X'.
ENDFORM.
Thanks,
Sankar M

Similar Messages

How to read data after select multiple record by checkbox,

hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanks

Hi Prashant,
   Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details                             *
DATA :
t_flight LIKE
STANDARD TABLE
        OF fs_flight,
t_flight1 LIKE
   STANDARD TABLE
         OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
*                      AT USER COMMAND EVENT                          *
AT USER-COMMAND.
PERFORM selectall .
*&      Form SELECTION
*      Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid                       " Airline Code
          connid                       " Flight Connection Number
    FROM spfli
    INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM.                               " SELECTION
*&      Form DISPLAYBASIC
*      Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
    WRITE :
         w_check AS CHECKBOX,
         w_mark,
         fs_flight-carrid UNDER text-001,
         fs_flight-connid UNDER text-002.
ENDLOOP.                             " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM.                               " DISPLAYBASIC
*&      Form SELECTALL
*      To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
    WHEN 'SELECT_ALL'.
      w_check = 'X'.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line .
        MODIFY LINE w_line FIELD VALUE w_check .
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
      CLEAR w_line.
    WHEN 'DESELECTAL'.
      w_check = space.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line FIELD VALUE w_mark .
        IF w_mark = space .
          MODIFY LINE w_line FIELD VALUE w_check .
        ENDIF.                         " IF W_MARK = SPACE
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
    WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
    DO w_lines TIMES.
      READ LINE w_num FIELD VALUE w_check INTO w_check
                                 fs_flight-carrid INTO fs_flight-carrid
                                 fs_flight-connid INTO fs_flight-connid.
      IF sy-subrc = 0.
        IF w_check = 'X'
          SELECT carrid
                  connid
                  fldate               " Flight date
                  seatsmax             " Maximum capacity in economy
                  seatsocc             " Occupied seats in economy class
            FROM sflight
            INTO TABLE t_flight1
           WHERE carrid = fs_flight-carrid
             AND connid = fs_flight-connid.
          LOOP AT t_flight1 INTO fs_flight1.
            WRITE :
              / fs_flight-carrid UNDER text-001,
                fs_flight-connid UNDER text-002,
                fs_flight1-fldate UNDER text-007,
                fs_flight1-seatsmax UNDER text-008,
                fs_flight1-seatsocc UNDER text-009.
          ENDLOOP.
        ENDIF.                         " IF SY-SUBRC = 0
      ENDIF.                           " IF W_CHECK = 'X'.
      ADD 1 TO w_num.
    ENDDO.                             " DO W_LINES TIMES
    CLEAR w_check.
    w_num = 0.
ELSE .
    MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF.                               " IF SY-LILLI BETWEEN..
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " SELECTALL
Much Regards,
Amuktha.

How to select multiple lines in reports

Hi,
how to select multiple lines in a reports and process those selected lines to other activities like BDC.
Please paste sample report here. or any demo examples . (don't paste ALV report , paste only classical report)
suppose there are 10 records in output, i want to select 3 records and process other activities like bdc.
Point will awarded.

Hi ,
the o/p in ur case will be a basic list output with a check box enabled in the left .
Now say there are 10 records in the list output and i have checked 3 of them where checkboxes are enabled .
And i press a button to submit this to the BDC .
Here u need to make use of
READ LINE statement to read the records from the list output and then pass them to the BDC .
The code would be something like this
DO .
Read line index <field> where checkbox <> ' '.
ENDO.
You can have a look at the F1 help on read line . This will mkae u clear .
Hope this gives u an idea.
Regards,
Vijay.

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

How to select multiple records from a TREE in the table

HI,
I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
Regards
-Sandip

Rashmi/Kukku,
First of all, Thanks for your help!
Is there any other way in which we can access tables other than using BAPIs or RFCs?
In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
Krishna Murthy

How to select multiple recipients in iPad mail

I have read that I can't create groups, but how to select multiple recipients in iPad mail?
I was looking for this when setting up for two new people who are going to have the iPad as their only device.. and they do need to email a bunch of people at once..
I was sending out the 'I have a new email address' BCC for them.
Thanks.

You can select multiple contacts by tapping on the + sign in the upper right corner in the To: field when you are typing a new email. Just keep tapping the + sign and your contacts will pop up in a window. Select the contact that you want to add, repeat the process in order to add as many recipients as you want.
There are other mail apps that let you creat groups and email to those groups.
https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?l=es&mt=8
https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
I am sure there are other, but those are two that I know of.

Does anyone know how to select multiple files in photoshop cs6 on macbook pro lion

I'm new to Mac operating system. Can anyone tell me how to select multiple images in cs6 photoshop? Without having to hold down a shift or cmd key and clicking on each one.

I assume you are using the Shape tool to draw your hexagons. After you drag out the shape, use the Transform controls to tweak the size, so that the width is evenly divisible by 4, and the height is an even number. If you wand a gap between shapes, include that in your adjustments. Make a note of the new width and height.
Once the scaling is committed and the shape is selected, Control+Alt+T to Free Transform Copy, and in the Option Bar, set the X and Y to Relative. Set X to zero, and Y to the height you set earlier, and commit the Transform. Then Repeatedly press Shift+Control+Alt+T to make more transformed copies.
With a vertical column of shapes, Alt-Click on the Shape Path in the Paths panel to select the whole path. Control+Alt+T again. This time, again using relative, set X to three-quarters of the width you noted earlier, and Y to one-half the height, and commit
Finally, again Alt-click on the Shape Path in the Paths panel, and Transform Copy relative with X = one and a half times the width you noted, and Y to zero. After committing this, Shift+Control+Alt+T as above to extend more columns.
And JJ, those are Octagons .

How to select multiple clips???

I am a very avid iMovie user and now this new version has me so confused. I have the basics down, but I can't figure out how to select all clips and dump them into the "timeline" area. I can select them one at a time and place them in the assembly area but that takes forever on a one hour soccer game. Anyone figure out how to select multiple clips or all clips at once?
Thanks ahead of time.

Weird seeing this question today after I dealt with this yesterday. I did a movie yesterday that was multiple clips. I was able to select all clips at once and drag the entire thing up to the top window. I just tried to do the same thing again after reading this question and for the life of me, it will no longer allow me to click and drag to select them all. I wonder if this has something to do with the fact that all 10 or so clips I was able to highlight before, were all parts of the same clip when filmed (they were split into individual segments when imported). When I try to combine two clips that are not filmed sequentially, it will no longer allow it. The help menu says nothing about this. All it says is you need to click on the first clip and hold the mouse down and drag it to the end and it will select all. That is not working.

How to select Multiple items in the dvt:pivotfilterbar?

How to select Multiple items in the filters in the dvt:pivotfilterbar?

To select multiple media and other files, it's not possible. You can do so in messages as directed.
To select multiple files, connect to your PC and select them.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to select multiple items in ListView?

Is it possible to select multiple items (rows) in ListView? I'm able
to select only one item at a time.
I'm running Forte 30F2 on Windows NT 4.0.
Thanks in advance,
Ramarao
Get Your Private, Free Email at http://www.hotmail.com

Ramarao,
I talked to Forte support about this recently and they had nothing but
bad news.
They said that you cannot select multiple rows in a listview, and that
this is a
feature that will be in the next release ( release 4 ).
I then asked if it was possible for me to highlight a row manually ( and
do the multiple
select myself ), and they said that also wasn't possible. This is due
to the fact that
there are no displaynode properties that effect display attributes (
like font or color ).
They suggested that I try changing the smallicon to show rows that have
been 'selected'.
In other words, when you ctrl-click on any particular row, you could put
an icon at the
beginning of a row that shows that this row has been clicked on.
I'm still working on this myself, so I will keep you posted.
Jeff Pickett
From: Ramarao P[SMTP:[email protected]]
Reply To: Ramarao P
Sent: Tuesday, March 24, 1998 6:22 PM
To: [email protected]
Subject: How to select multiple items in ListView?
Is it possible to select multiple items (rows) in ListView? I'm able
to select only one item at a time.
I'm running Forte 30F2 on Windows NT 4.0.
Thanks in advance,
Ramarao
Get Your Private, Free Email at http://www.hotmail.com

How to select multiple row of table using check box?

hi,
         i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view...
          my problem is if i select only one row , i can use onlead select property of table..but when i select multiple rows through check box how should i read contents of table....?
Plz solve it.
Thanks,
Saurin Shah

Hello Saurin,
You are right using LeadSelection you can select only 1 row at a time. You will have to make use of Selection for achieving this. First you will have to change the selection mode of the table to multiple & also change the selection property for the related context to 0..n . Please find a code extract which might help you. (However this facility is only available from SP 14.) The main part is using the set_selected method of if_wd_context_node.
data: node_zcourse_details type ref to if_wd_context_node,
         node_course_assign type ref to if_wd_context_node,
         elem_course_assign type ref to if_wd_context_element,
         stru_course_assign type if_v_details=>element_course_assign ,
         item_popin_selected like stru_course_assign-popin_selected.
"     navigate from <CONTEXT> to <ZCOURSE_DETAILS> via lead selection
node_zcourse_details = wd_context->get_child_node( name = if_v_details=>wdctx_zcourse_details ).
"     navigate from <ZCOURSE_DETAILS> to <COURSE_ASSIGN> via lead selection
node_course_assign = node_zcourse_details->get_child_node( name = if_v_details=>wdctx_course_assign ).
"     @TODO handle not set lead selection
if ( node_course_assign is initial ).
exit.
endif.
data elem_set type wdr_context_element_set.
field-symbols <wa_elem> like line of elem_set.
elem_set = node_course_assign->get_elements( ).
loop at elem_set assigning <wa_elem>.
   <wa_elem>->set_selected( TRUE OR FALSE ). " Supply either TRUE/FALSE in here
endloop.

How to select multiple rows from List Of Values

Hello,
I use ADF 11g to create my list of values (LOV). I want to select multiple rows from it. but i can't.
so how i can select many rows to set them in my adf table.
Thank in advance

Hi,
LOV is map to an attribute in the viewObject so it will return only one value or more values from selected row. You can't select multiple rows from LOV.
But you can do this by using popup which you can select multiple rows and insert the selected rows to another table.
This blog post explain how to achieve this :
http://husaindalal.blogspot.com/2009/11/search-from-popup-and-add-to-new-table.html#comments
Sameh Nassar

How to select multiple chek in checkbox in alv

Similar Messages

Maybe you are looking for