How to select Multiple files in ADF?

I have a requirement to select multiple files in my aaplication.
I know af:inputfile can select only one file and putting more af:inputfile component on the screen is not an option.
Can someone please help me on this
Thanks
RJ

Hi,
multiple file uploads is a feature of JDeveloper 12c (upcoming)
Frank

Similar Messages

  • How to select multiple files with Trackpad

    I am new to Mac and to the Trackpad. I apologize if this has been posted.
    When I work on a Windows PC, if I want to select multiple consecutive files I can click on the first file, press and hold SHIFT and then select the last file and all files in between are selected.
    I tried that using the Trackpad and it doesn't seem to work the same way. Is there another key combination? I can select multiple files by either using SHIFT (on Picasa website for example) and then tap or by holding COMMAND and then tap each individual file. But how do I select multiple files similar to Windows, clicking first file pressing a key and clicking the last file.
    Thanks in advance for any input on this.

    If you choose 'view as list', you can use the shift-key. Select an item, press the shift-key while you press an item below and all the items between are selected.

  • Does anyone know how to select multiple files in photoshop cs6 on macbook pro lion

    I'm new to Mac operating system. Can anyone tell me how to select multiple images in cs6 photoshop? Without having to hold down a shift or cmd key and clicking on each one.

    I assume you are using the Shape tool to draw your hexagons. After you drag out the shape, use the Transform controls to tweak the size, so that the width is evenly divisible by 4, and the height is an even number. If you wand a gap between shapes, include that in your adjustments. Make a note of the new width and height.
    Once the scaling is committed and the shape is selected, Control+Alt+T to Free Transform Copy, and in the Option Bar, set the X and Y to Relative. Set X to zero, and Y to the height you set earlier, and commit the Transform. Then Repeatedly press Shift+Control+Alt+T to make more transformed copies.
    With a vertical column of shapes, Alt-Click on the Shape Path in the Paths panel to select the whole path. Control+Alt+T again. This time, again using relative, set X to three-quarters of the width you noted earlier, and Y to one-half the height, and commit
    Finally, again Alt-click on the Shape Path in the Paths panel, and Transform Copy relative with X = one and a half times the width you noted, and Y to zero. After committing this, Shift+Control+Alt+T as above to extend more columns.
    And JJ, those are Octagons .

  • How to select multiple files in OSX Lion?

    Hi, I was wondering if Finder in Lion has a funtion similar to the Control+Click option that Windows has, which allows me to select multiple non-sequential files.
    Thanks!

    Csound1 wrote:
    Cmd+Click
    Thanks for your help...

  • How do you select multiple files on a macbook pro?

    Can anyone tell me how to select multiple files at one time?  I am so frustrated with the way macbook pro works that I really regret buying it.  I hate that you can't select multiple files, and that my contact stuff keeps changing.  It is certainly not like I was told...that I would never want to use a PC again.  I would not buy another apple computer.  I spent a lot of money to NOT be able to do things that I have always done with ease.  Every time I think I have something figured out, it doesn't work the next time I go to use it in another program.  If anyone has an answer to this, I would sure appreciate it. 
    And all of these so called wonderful updates to the operating system on all mac products have left me frustrated and liking my apple products far less than I did before.  On my iphone I had to make the texts just huge to even be able to see the white writing on a blue background.  Not sure who made these designs, but from my perspective, I can tell you they certainly weren't thinking about being user friendly in any way when they did it.  So disappointed in all of my devices!  I do not enjoy using my computer, ipad, or iphone even close to what I did before.

    This is some information on the Finder.
    http://support.apple.com/kb/ht2470
    To select multiple files you can use the shift key with the mouse if they are in a contiguous list or the CMD key with the mouse if you have breaks in that list. You can also use the mouse to drag over the files you want to select.
    The Macs are easy to use, I have used many versions of Windows, Linux and other operating systems and I find OS X is far the easiest, but that is me.
    There are many instructional videos and texts on Apples web site and if you are near to an Apple store they do classes to help.
    Hope you get used to it.

  • How do you select multiple files to drag

    How do you select multiple files to drag from one folder to another? Is there a command?

    Open the folder which has the contents you want to transfer.  Press COMMAND 'A' and then all of the data should be highlited in blue.  Drag it to the new folder.
    If only certain files are to be transferred, then you have to select them (COMMAND 'A')  individually and the drag them as a group to the new location.
    Ciao.

  • How do you select multiple files at one time

    How do you select multiple files at one time

    Select one, and then either command-click another, or in list/column view, Shift-click the item at the other end of the range you want to select. Alternatively, click on a spot in the screen and drag the cursor until all the files are selected.
    (114308)

  • How do I select multiple files under "Get File Info"and lock or unlock all?

    How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

    Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Anyone know how to measure multiple file selections in a finder window?

    Hello,
    I have a flash drive that holds 8gbs. I have an enormous folder of images I am going to start passing to my buddy on the flash drive. Anybody know how I can select multiple files and know how big the selection will be prior to dragging them to the 8gb drive?
    Thank!
    Kirk

    Shift-click or command-click to select them, and then press the Option, Command, and I keys; the information in the window will change as the selection changes.
    (52489)

  • Super Basic, How do I select multiple files?

    Super Basic, How do I select multiple files?  I can click on one, but I want to select an entire group of files.  On a PC I would use the control or shift keys, or just use the mouse to draw a box around them, but nothing seems to work.

    It works here using the Shift key (after selecting the first item, hit Shift key while clicking on another). If you display your Finder windows as list or columns, it's extra easy: You click on the first item, then hit Shift and click on the last item - all of them will be selected.

  • How to prompt user to select multiple files in file dialog using scripts

    Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and then the script would process each one.
    Thanks!

    // Main Code [Execution of script begins here]
    here's what I have so far. it would also be nice to not have illustrator stop at errors.. right now, it skips dialogs but on errors, it still stops.
    // uncomment to suppress Illustrator warning dialogs
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
    var destFolder, sourceFolder, files, fileType, sourceDoc, targetFile, pdfSaveOpts, folderName;
    var fullPath = "";
    var finalSlash;
    // Select the source folder.
    sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator .ai files you want to convert to PDF');
    f = find_files(sourceFolder);
    function find_files (dir)
        return find_files_sub (dir, []);
    function find_files_sub (dir, array)
        var f = Folder (dir).getFiles ("*.*");
        for (var i = 0; i < f.length; i++)
            if (f[i] instanceof Folder)
                find_files_sub (f[i], array);
            else
                if (f[i].name.slice (-3).toLowerCase() == ".ai"          || f[i].name.slice (-4).toLowerCase() == ".eps")
                        //convert the array-listing to a string so we can manipulate it
                        fullPath = String(f[i]);
                        //find the position of the last / to indicate where the filename starts
                        finalSlash = fullPath.lastIndexOf("/");
                        //get the foldername by "slicing" from start to where finalSlash is located
                        folderName = fullPath.slice(0, finalSlash).toLowerCase();                   
                        sourceDoc = app.open(f[i]); // returns the document object
                        // Call function getNewName to get the name and file to save the pdf          
                                                      targetFile_PNG = getNewName(".png");
                                                      if(targetFile_PNG.exists) {
                                                      } else {
                                                                pngExportOpts = getPNGOptions();
                                                                sourceDoc.exportFile(targetFile_PNG, ExportType.PNG24, pngExportOpts );
                        targetFile_PDF = getNewName(".pdf");
                        pdfSaveOpts = getPDFOptions();
                                                      sourceDoc.saveAs(targetFile_PDF, pdfSaveOpts );
                                                      targetFile_SVG = getNewName(".svg");
                                                      svgSaveOpts = getSVGOptions();
                                                      sourceDoc.exportFile(targetFile_SVG, ExportType.SVG, svgSaveOpts );
                        sourceDoc.close();
                        array.push (f[i]);
    getNewName: Function to get the new file name. The primary
    name is the same as the source file.
    function getNewName(ext)
        var ext, docName, newName, saveInFile, docName, finalDot
        var loop = 0;
        docName = sourceDoc.name;
        ext = ext; // new extension for pdf file
        newName = "";
        finalDot = sourceDoc.name.lastIndexOf(".");
        while(loop < finalDot)
            newName += docName[loop];
            loop = loop + 1;
        newName += ext; // full pdf name of the file
              newName = newName.replace(" [Converted]","");
        // Create a file object to save the pdf
        saveInFile = new File( folderName + '/' + newName );
        return saveInFile;
    getPDFOptions: Function to set the PDF saving options of the
    files using the PDFSaveOptions object.
    function getPDFOptions()
        // Create the PDFSaveOptions object to set the PDF options
        var pdfSaveOpts = new PDFSaveOptions();
        // Setting PDFSaveOptions properties. Please see the JavaScript Reference
        // for a description of these properties.
        // Add more properties here if you like
        pdfSaveOpts.acrobatLayers = false;
        pdfSaveOpts.colorBars = false;
        pdfSaveOpts.colorCompression = CompressionQuality.AUTOMATICJPEGHIGH;
        pdfSaveOpts.compressArt = true; //default
        pdfSaveOpts.embedICCProfile = false;
        pdfSaveOpts.enablePlainText = false;
        pdfSaveOpts.generateThumbnails = false; // default
        pdfSaveOpts.optimization = true;
        pdfSaveOpts.pageInformation = false;
        pdfSaveOpts.preserveEditability = true;
        return pdfSaveOpts;
    function getSVGOptions()
              var svgSaveOpts = new ExportOptionsSVG();
              //just using defaults aside from what's written below
      //see http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/references/csawlib/com/adobe/illustrator/ ExportOptionsSVG.html
      svgSaveOpts.embedRasterImages = true;
      svgSaveOpts.sVGTextOnPath = true;
              return svgSaveOpts;
    function getPNGOptions()
              // Create the PDFSaveOptions object to set the PDF options
              var pngExportOpts = new ExportOptionsPNG24();
              // Setting PNGExportOptions properties. Please see the JavaScript Reference
              // for a description of these properties.
              // Add more properties here if you like
              pngExportOpts.antiAliasing = true;
              pngExportOpts.artBoardClipping = false;
              pngExportOpts.horizontalScale = 100; // scaling to 350%
              pngExportOpts.saveAsHTML = false;
              pngExportOpts.transparency = true;
              pngExportOpts.verticalScale = 100; // scaling to 350%
              return pngExportOpts;

  • How to upload multiple files using wicket

    Hai,
    how to upload multiple files using wicket at a single browse.
    any suggestion?
    Thanks in advance

    You have to do this your self by either (as vinod said) using a different component (not present in adf) or implementing this:
    1) allow the user to select multiple filenames (somehow)
    2) zip them together
    3) upload the zip
    4) unpack the zip on the server
    5) work with the files
    Timo

  • How to implement multiple files upload

    RichFaces has a cool component for uploading multiple files with flash. But we use ADF and we need to deploy it on a 10G server. With multiple upload I mean that it should be possible to press a browse button and in the file dialog select multiple files instead of the standard one file.
    Do you know any open source flash fileupload applications and do you have an example of how to integrate it with ADF?

    I have done that but rather then using a single <af:inputFile> to upload a file i have used multiple of the same and set their rendered property as true when user clicks on add another attachments. The trick to call a java method from the doDML method of entity object and writing your custom logic their. Also you need to used Partial Submit =true on the Submit button of the creation page so that page does not get submited and you do not loose the Uploaded File Objects when you press commit button.
    How to call method from doDML
    make your backing bean scope as session
    protected void doDML(int operation, TransactionEvent e) {
    if(operation==1){
    FacesContext ctx = FacesContext.getCurrentInstance();
    Class c[]=new Class[3];
    String s="rohit";
    oracle.jbo.domain.Number n=new oracle.jbo.domain.Number();
    c[0]=s.getClass();
    c[1]=s.getClass();
    c[2]=s.getClass();
    MethodBinding vb = ctx.getApplication().createMethodBinding("#{AddIwoAttachment.insert}",c);
    Object para[]=new Object[3];
    para[0] = getIwoNo();
    para[1]= getProjectNo().toString();
    para[2]= getRemarks();
    vb.invoke(ctx,para);
    // AddIwoAttachment o=(AddIwoAttachment)vb.getValue(ctx.getCurrentInstance());
    // System.out.println(o.fileName1);
    else{
    super.doDML(operation, e);
    Where MethodBinding vb = ctx.getApplication().createMethodBinding("#{AddIwoAttachment.insert}",c); creates the methodBinding to the same object whick backs the af:inputFile ActionListener and mehtodBinding .invoke calls the method and para is used to supply other attribute values.
    Hope this helps.
    Regards
    Rohit

  • How to store multiple files from SAp in to Application server?

    Hi Guys,
                 Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
                Any Logic  or Code for how to do is welcomed.
                        plz help me urgently.
    Thanks,
    Gopi

    Hi,
      directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
    Here you are code which I use to upload text files from local disc into application folder
    Regards,
      Karol
    *& Report  FILE_PC_TO_SAP
    REPORT  FILE_PC_TO_SAP.
    DATA: BEGIN OF searchpoints OCCURS 100,
            DIRNAME(200)     TYPE c, " name of directory.
            sp_name(100)     TYPE c," name of entry. (may end with *)
          END OF searchpoints.
    DATA: BEGIN OF isearchpoints OCCURS 10,
            dirname(75) TYPE c,            " name of directory.
            aliass(75)  TYPE c,            " alias for directory.
            svrname(75) TYPE c,            " svr where directory is availabl
            sp_name(75) TYPE c,            " name of entry. (may end with *)
            sp_cs(10)   TYPE c,            " ContainsString pattern for name
          END OF isearchpoints.
    data: l_file type filetable.
    data: l_rc   type i.
    data: itab   type TABLE OF string.
    data: g_tmp_file_path type rlgrap-filename.
    data: wa_itab type string.
    data: h_destin(100) type c.
    data: dat      type string.
    INITIALIZATION.
    perform get_directories.
    START-OF-SELECTION.
    parameters: in_file type string OBLIGATORY LOWER CASE.
    parameters: destin(100) type c OBLIGATORY LOWER CASE.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
       FILENAME                      = in_file
       "FILETYPE                      = 'BIN'
       FILETYPE                      = 'ASC'
       HAS_FIELD_SEPARATOR           = ' '
       HEADER_LENGTH                 = 0
       READ_BY_LINE                  = 'X'
       DAT_MODE                      = ' '
      TABLES
        DATA_TAB                     = itab
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17.
    IF sy-SUBRC <> 0.
      write: / 'Error during loading input file!'.
    ENDIF.
    if h_destin is INITIAL.
      h_destin = in_file.
    endif.
    CONCATENATE destin h_destin into dat SEPARATED BY '/'.
    *TRANSLATE dat TO UPPER CASE.
    OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-SUBRC = 0.
      loop at itab into wa_itab.
         TRANSFER: wa_itab TO dat.
      endloop.
      CLOSE DATASET dat.
      write: / 'File uploaded!'.
    ELSE.
      write: / 'Not possible to open dataset'.
    ENDIF.
    at selection-screen on value-request for in_file.
      perform select_input_file_name.
      loop at l_file into g_tmp_file_path.
        move g_tmp_file_path to in_file.
        h_destin = ''.
        SPLIT g_tmp_file_path at '\' into table itab.
        loop at itab into g_tmp_file_path.
          h_destin = g_tmp_file_path.
        endloop.
      endloop.
    at selection-screen on value-request for destin.
      DATA: lt_dfies    TYPE TABLE OF dfies.
      DATA: lwa_dfies   TYPE dfies.
      CALL FUNCTION 'DDIF_FIELDINFO_GET'
        EXPORTING
          tabname    = '/BI0/PCO_AREA'
          lfieldname = 'CO_AREA'
        IMPORTING
          dfies_wa   = lwa_dfies.
      lwa_dfies-tabname = 'searchpoints'.
      lwa_dfies-REPTEXT   = 'Destination directory'.
      lwa_dfies-LENG      = 100.
      lwa_dfies-INTLEN    = 100.
      lwa_dfies-OUTPUTLEN = 100.
      lwa_dfies-fieldname = 'SP_NAME'.
      APPEND lwa_dfies TO lt_dfies.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD = 'SP_NAME'
          DYNPPROG = SY-REPID
          DYNPNR = SY-DYNNR
          DYNPROFIELD = 'destin'
          VALUE_ORG = 'S'
        TABLES
          VALUE_TAB = searchpoints
          FIELD_TAB = lt_dfies
        EXCEPTIONS
          PARAMETER_ERROR = 1
          NO_VALUES_FOUND = 2
          OTHERS = 3.
    *&      Form  select_input_file_name
    *       text
    form select_input_file_name.
    *  call function 'F4_FILENAME'
    *       exporting
    *            program_name  = sy-repid
    *            dynpro_number = sy-dynnr
    *            field_name    = 'PATH'
    *       importing
    *            file_name     = g_tmp_file_path.
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
      EXPORTING
      WINDOW_TITLE = 'Please choose a file'
      "default_extension = '*.TXT'
      "default_filename = 'C:\*.txt'
      initial_directory = 'C:\'
      file_filter = '*.*'
      CHANGING
      FILE_TABLE = l_file
      RC = l_RC
      EXCEPTIONS
      FILE_OPEN_DIALOG_FAILED = 1
      CNTL_ERROR = 2
      ERROR_NO_GUI = 3
      NOT_SUPPORTED_BY_GUI = 4
      OTHERS = 5.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endform.                    "select_input_file_name
    *&      Form  WRITE_DB_HOME
    *       Write DB home directory
    *       no parameters
    FORM write_db_home.
      CASE sy-dbsys(3).
        WHEN 'ORA'.
          CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_ORAHOME'
                             ID 'VALUE' FIELD searchpoints-dirname.
    *--- C5056155 Start of ALV -------------------------------*
    *      PERFORM flip_flop(rsora000) USING cflag.
    *      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
          MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
          APPEND searchpoints.
    *--- C5056155 End   of ALV -------------------------------*
        WHEN 'ADA'.
          CALL 'C_GETENV' ID 'NAME'  FIELD 'DBROOT'
                          ID 'VALUE' FIELD searchpoints-dirname.
    *--- C5056155 Start of ALV -------------------------------*
    *      PERFORM flip_flop(rsora000) USING cflag.
    *      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
          MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
          APPEND searchpoints.
    *--- C5056155 End   of ALV -------------------------------*
        WHEN 'INF'.
          CALL 'C_GETENV' ID 'NAME'  FIELD 'INFORMIXDIR'
                          ID 'VALUE' FIELD searchpoints-dirname.
    *--- C5056155 Start of ALV -------------------------------*
    *      PERFORM flip_flop(rsora000) USING cflag.
    *      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
          MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
          APPEND searchpoints..
    *--- C5056155 End   of ALV -------------------------------*
        WHEN 'DB6'.
          CALL 'C_GETENV' ID 'NAME'  FIELD 'INSTHOME'
                          ID 'VALUE' FIELD searchpoints-dirname.
          IF sy-subrc = 0.
    *--- C5056155 Start of ALV -------------------------------*
    *        PERFORM flip_flop(rsora000) USING cflag.
    *        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
            MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
            APPEND searchpoints.
    *--- C5056155 End   of ALV -------------------------------*
          ELSE.
            EXIT.
          ENDIF.
        WHEN OTHERS.
          EXIT.
      ENDCASE.
    ENDFORM.                    " WRITE_DB_HOME
    FORM get_directories.
    * get the name and aliases of ALL userdefined directories
      SELECT * FROM user_dir INTO isearchpoints
        WHERE svrname = sy-uname.
        MOVE isearchpoints-dirname to searchpoints-dirname.
        MOVE isearchpoints-aliass  to searchpoints-sp_name.
        APPEND searchpoints.
      ENDSELECT.
      SELECT * FROM user_dir INTO isearchpoints
        WHERE svrname = 'all'.
        MOVE isearchpoints-dirname to searchpoints-dirname.
        MOVE isearchpoints-aliass  to searchpoints-sp_name.
        APPEND searchpoints.
      ENDSELECT.
    * Get DB home
      IF sy-dbsys(3) = 'ADA'.
        PERFORM write_db_home.
      ENDIF.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_ATRA'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_BINARY'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory $DIR_CCMS
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_CCMS'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_CT_LOGGING'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_CT_RUN'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_DATA'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * Get DB home
      IF sy-dbsys(3) = 'DB6'.
        PERFORM write_db_home.
      ENDIF.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_DBMS'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_EXECUTABLE'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_EXE_ROOT'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
      APPEND searchpoints.
    *get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_GEN'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_GEN_ROOT'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_GLOBAL'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
      APPEND searchpoints.
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_GRAPH_EXE'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_GRAPH_LIB'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_HOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * Get DB home
      IF sy-dbsys(3) = 'INF'.
        PERFORM write_db_home.
      ENDIF.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_INSTALL'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_INSTANCE'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_LIBRARY'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_LOGGING'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the files written by the memory inspector
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_MEMORY_INSPECTOR'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
      APPEND searchpoints.
    * Get DB home
      IF sy-dbsys(3) = 'ORA'.
        PERFORM write_db_home.
      ENDIF.
    *get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_PAGING'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
      APPEND searchpoints.
    *get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_PUT'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_PERF'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
      APPEND searchpoints.
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_PROFILE'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_PROTOKOLLS'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_REORG'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_ROLL'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_RSYN'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * calculate directory for saphostagent (no sapparam available...)
      IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
        DATA: windir_path(64),  programfiles_path(64).
    *   hoping that ProgramFiles is set in service user environment
        CALL 'C_GETENV' ID 'NAME'  FIELD 'ProgramFiles'
                        ID 'VALUE' FIELD programfiles_path.
        IF programfiles_path IS INITIAL.
    *     %ProgramFiles% not available. guess from windir
          CALL 'C_GETENV' ID 'NAME'  FIELD 'windir'
                          ID 'VALUE' FIELD windir_path.
    *     e.g. S:\WINDOWS ==> S:\Program Files
          CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
        ENDIF.
        CONCATENATE programfiles_path '\SAP\hostctrl'
                                                 INTO searchpoints-dirname.
      ELSE.
    *   on UNIX, the path is hard coded
        searchpoints-dirname = '/usr/sap/hostctrl'.
      ENDIF.
      MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_SAPUSERS'
                         ID 'VALUE' FIELD searchpoints-dirname.
      IF searchpoints-dirname = '.'.
        IF sy-opsys = 'Windows NT'.
          searchpoints-dirname = '.\'.
        ELSE.
          searchpoints-dirname = './'.
        ENDIF.
      ENDIF.
      MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_SETUPS'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_SORTTMP'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
      APPEND searchpoints.
    *get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_SOURCE'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_TEMP'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_TRANS'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
      APPEND searchpoints.
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_TRFILES'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
      APPEND searchpoints.
    * get name of directory with the error files
      CALL 'C_SAPGPARAM' ID 'NAME'  FIELD 'DIR_TRSUB'
                         ID 'VALUE' FIELD searchpoints-dirname.
      MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
      APPEND searchpoints.
    *  get the name of the current server.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                         ID 'VALUE' FIELD searchpoints-dirname.
      data: h_ind type i.
      LOOP AT searchpoints.
        h_ind = sy-tabix.
        IF searchpoints-sp_name IS INITIAL.
          DELETE searchpoints INDEX h_ind.
        ENDIF.
      ENDLOOP.
    ENDFORM.

  • How to select multiple values from a listbox

    Hi,
    I have a list box on my UI which is not allowing me to select multiple values
    I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
    When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
    I am working on Jdev 11.1.1.3 and I am using ADF/BC components
    How to select multiple values from a listbox ?
    Thanks,

    Hi,
    I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
    And what is the error ?
    Frank

Maybe you are looking for