How to select multiple records in an ALV by REUSE_ALVGRID_DISPLAY

Dear all ,
I am displaying a report by REUSE_ALV_GRID_DISPLAY. I have used "box_fieldname" property to select a record in the alv . but i am not able to select more tha one record at a time . Can anyboby suggest me how will be i able to select more than one record at a time .
regards
amar

https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=47808545

Similar Messages

How to select multiple records in the ALV POP UP by using oops

Hi All,
We have a requirement of ALV POP UP by using the OOPS. How to select the multiple records in the POP UP and After selecting that i want do Inteactive ALV means again one more POP UP in ALV.
Thanks for help....
Regards,
Bharani

Hello Bharani
Displaying an ALV list in a popup is by no means different from a list displayed on a main screen. The only thing you need to consider is that you set the right screen level when creating the parent container for the ALV.
For more details refer to thread in CL_GUI_SPLITTER_CONTAINER ALV list is not show in called screen
" step 1:
CREATE OBJECT gr_spliter
    EXPORTING
      parent = cl_gui_container=>screen0 " For first popup use: =>screen1
      rows = 1
      columns = 2.
Regards
Uwe

How to select multiple records from a TREE in the table

HI,
I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
Regards
-Sandip

Rashmi/Kukku,
First of all, Thanks for your help!
Is there any other way in which we can access tables other than using BAPIs or RFCs?
In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
Krishna Murthy

How to select multiple records in ALV with out pressing ctrl

Hi Experts,
Is there a way to select multiple records in ALV with out pressing ctrl button on the key board?
Selection and deselection should allow multiple records.
any clue is highly appreciated.
regards,
Ajay

The keyboard always plays a role, although with the Shift key you can select blocks of records.
○ CTRLclick, CTRLspacebar
Toggles a selection.
○ SHIFTclick, CTRLshift
Selects the area from the lead selection to the row selected. If no lead selection is set, the selection starts from the first row. In the multiNoLead mode, the selection starts from the row last selected

How to select multiple chek in checkbox in alv

how to select multiple chek in checkbox in alv

Hi,
Following report is the checkbox alv sample report.
REPORT YMS_CHECKBOXALV.
TYPE-POOLS: slis.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
DATA: s_layout TYPE slis_layout_alv.
DATA: BEGIN OF itab OCCURS 0,
icon TYPE icon-id,
vbeln TYPE vbeln,
kunnr TYPE kunnr,
erdat TYPE erdat,
box TYPE c,
END OF itab.
DATA: v_repid TYPE syrepid.
START-OF-SELECTION.
Get the data.
SELECT vbeln kunnr erdat UP TO 100 ROWS
FROM vbak
INTO CORRESPONDING FIELDS OF TABLE itab.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'No data found'.
LEAVE LIST-PROCESSING.
ENDIF.
Modify the record with red light.
itab-icon = '@0A@'.
MODIFY itab TRANSPORTING icon WHERE NOT vbeln IS initial.
v_repid = sy-repid.
Get the field catalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'ICON'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-seltext_l = 'Status'.
s_fieldcatalog-icon = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'KUNNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname = 'ITAB'.
s_fieldcatalog-rollname = 'ERDAT'.
APPEND s_fieldcatalog TO t_fieldcatalog.
Set the layout.
s_layout-box_fieldname = 'BOX'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
is_layout = s_layout
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = t_fieldcatalog[]
TABLES
t_outtab = itab.
FORM SET_PF_STATUS *
--> EXTAB *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'TEST2'.
ENDFORM.
FORM user_command *
--> UCOMM *
--> SELFIELD *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
Check the ucomm.
IF ucomm = 'DETAIL'.
LOOP AT itab WHERE box = 'X'.
itab-icon = '@08@'.
MODIFY itab TRANSPORTING icon.
ENDLOOP.
ENDIF.
selfield-refresh = 'X'.
ENDFORM.
Thanks,
Sankar M

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

How to read data after select multiple record by checkbox,

hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanks

Hi Prashant,
   Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details                             *
DATA :
t_flight LIKE
STANDARD TABLE
        OF fs_flight,
t_flight1 LIKE
   STANDARD TABLE
         OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
*                      AT USER COMMAND EVENT                          *
AT USER-COMMAND.
PERFORM selectall .
*&      Form SELECTION
*      Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid                       " Airline Code
          connid                       " Flight Connection Number
    FROM spfli
    INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM.                               " SELECTION
*&      Form DISPLAYBASIC
*      Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
    WRITE :
         w_check AS CHECKBOX,
         w_mark,
         fs_flight-carrid UNDER text-001,
         fs_flight-connid UNDER text-002.
ENDLOOP.                             " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM.                               " DISPLAYBASIC
*&      Form SELECTALL
*      To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
    WHEN 'SELECT_ALL'.
      w_check = 'X'.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line .
        MODIFY LINE w_line FIELD VALUE w_check .
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
      CLEAR w_line.
    WHEN 'DESELECTAL'.
      w_check = space.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line FIELD VALUE w_mark .
        IF w_mark = space .
          MODIFY LINE w_line FIELD VALUE w_check .
        ENDIF.                         " IF W_MARK = SPACE
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
    WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
    DO w_lines TIMES.
      READ LINE w_num FIELD VALUE w_check INTO w_check
                                 fs_flight-carrid INTO fs_flight-carrid
                                 fs_flight-connid INTO fs_flight-connid.
      IF sy-subrc = 0.
        IF w_check = 'X'
          SELECT carrid
                  connid
                  fldate               " Flight date
                  seatsmax             " Maximum capacity in economy
                  seatsocc             " Occupied seats in economy class
            FROM sflight
            INTO TABLE t_flight1
           WHERE carrid = fs_flight-carrid
             AND connid = fs_flight-connid.
          LOOP AT t_flight1 INTO fs_flight1.
            WRITE :
              / fs_flight-carrid UNDER text-001,
                fs_flight-connid UNDER text-002,
                fs_flight1-fldate UNDER text-007,
                fs_flight1-seatsmax UNDER text-008,
                fs_flight1-seatsocc UNDER text-009.
          ENDLOOP.
        ENDIF.                         " IF SY-SUBRC = 0
      ENDIF.                           " IF W_CHECK = 'X'.
      ADD 1 TO w_num.
    ENDDO.                             " DO W_LINES TIMES
    CLEAR w_check.
    w_num = 0.
ELSE .
    MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF.                               " IF SY-LILLI BETWEEN..
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " SELECTALL
Much Regards,
Amuktha.

How to select multiple lines in reports

Hi,
how to select multiple lines in a reports and process those selected lines to other activities like BDC.
Please paste sample report here. or any demo examples . (don't paste ALV report , paste only classical report)
suppose there are 10 records in output, i want to select 3 records and process other activities like bdc.
Point will awarded.

Hi ,
the o/p in ur case will be a basic list output with a check box enabled in the left .
Now say there are 10 records in the list output and i have checked 3 of them where checkboxes are enabled .
And i press a button to submit this to the BDC .
Here u need to make use of
READ LINE statement to read the records from the list output and then pass them to the BDC .
The code would be something like this
DO .
Read line index <field> where checkbox <> ' '.
ENDO.
You can have a look at the F1 help on read line . This will mkae u clear .
Hope this gives u an idea.
Regards,
Vijay.

Selecting multiple rows of an alv

Hi All,
I have a requirement where in i have to select multiple rows of an alv and when i click a button i should get the data of all the selected rows, i am able to select only one row by default , how to select multiple rows or records,i am new to this Web dynpro alv , can aynbody please help me on this.
Thanks,
Praveen.

hi, praveen kumar.
About how to make "Multiple-select" of ALV available, you can take a reference of the following coding. Just one example:
****ALV Config****
DATA:
      lr_salv_wd_table TYPE REF TO iwci_salv_wd_table,
      l_value TYPE REF TO cl_salv_wd_config_table,
      lr_table_settings TYPE REF TO if_salv_wd_table_settings.
   lr_salv_wd_table = wd_this->wd_cpifc_alv_child( ). "Your statically declared ALV component usage
   l_value = lr_salv_wd_table->get_model( ).
* tabel setting
lr_table_settings ?= l_value .
lr_table_settings->set_selection_mode( cl_wd_table=>e_selection_mode-MULTI ).
About how to get your selected records of ALV, you can make use of the context node bound to your ALV component. For example,
****get selected elements****
lt_elems = lo_node->GET_SELECTED_ELEMENTS(
      INCLUDING_LEAD_SELECTION = abap_true ).
These are just examples. For detail, you can search them.
Thanks.Best wishes.

How to get multiple records using fn-bea:execute-sql()

Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AM

Hi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat

How to Delete Multiple Records using selectbox in jsf

Hi!
My Senario is I want to delete multiple records using checkbox. After selecting multiple records when i click the delete button the selected
rows shuld be deleted.if am doing like this but the edit ,delete for each row functionality is not working.
<h:selectBooleanCheckbox id ="bcb" value="#{item.empno}">
</h:selectBooleanCheckbox>
But other functionality is not wokring.
Can any one plz tell how to select the multiple records and how to send the id to the serverside.
I want code code for jsp and as well as backingBean how to accaess .
Any Reply shuld be apreciated

You may find this article useful as well: http://balusc.blogspot.com/2006/06/using-datatables.html
Check the chapter "Select multiple rows" for two generic ways to select multiple rows in a datatable.

How to insert multiple records in a single query

Dear all,
Can you please tell
how to insert multiple records in a single query ??

INSERT INTO table_name (column_1, column_2) VALUES ('value_A', 'value_B')OR
INSERT INTO table_name
(column_1, column_2)
SELECT 'value_A', 'value_B' FROM DUAL
UNION ALL
SELECT 'value_C', 'value_D' FROM DUAL
;Edited by: Benton on Nov 9, 2010 1:59 PM

How to send multiple records in file2file and file2db or all scenarios//

I'm able to send single record for file2file and file2db,
how to send multiple records in file2file and file2db or all scenarios//
what should add or make changes for dis.

1 put Occurance 1 to Unbounded in data type of IR
2 In the test tag of message mappings in IR,select one node and use "duplicate subtree" in its context menu
After that,you can download the test data in XML format with the button "save document source"
for example:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ZFileDemo xmlns:ns0="http://hand-china.com/mm/po_01">
- <Item>
<ItemNo>1</ItemNo>
<Matnr>2</Matnr>
<Text>3</Text>
</Item>
- <Item>
<ItemNo>4</ItemNo>
<Matnr>5</Matnr>
<Text>6</Text>
</Item>
</ns0:ZFileDemo>

How to Save Multiple Records In Data Block

Hi All,
I Have Two Blocks --> Control Block,Database Block
Please Any Idea How to Save Multiple Records In Data Block when User changed Data in Control Block.
Thanks For Your Help
Sa

Now i have to use each record of control block(ctl_blk) as where condition in data base block(dat_blk)and display 10 records from database table.>
Do you want this coordination to be automatic/synchronized or only when the user clicks a button or something else to signal the coordination? Your answer here will dicate which trigger to put your code in.
As to the coordination part, as the user selects a record in the Control Block (CB), you will need to take the Key information and modify the Data Block's (DB) "DEFAULT_WHER E" block property. The logical place to put this code is the CB When-New-Record-Instance (WNRI) trigger. You code will look something like the following:
/* Sample WNRI trigger */
/* This sample assumes you do not have a default value in the BLOCK WHER E property */
DECLARE
   v_tmp_dw    VARCHAR2(250);
BEGIN
   v_tmp_dw := ' DB_Key_Column1 = '||:CONTROL.Key_Column1||' AND DB_Key_Column2 = '||:CONTROL.Key_Column_2;
   Set_Block_Property('DATA_BLOCK', DEFAULT_WHER E, v_tmp_df);
   /* If you want auto coordination to occur, do the following */
   Go_Block('DATA_BLOCK');
   Execute_Query;
   /* Now, return to the Control Block */
   Go_Block('CONTROL_BLOCK');
END;
The Control block items are assigned with values in Form level (Key_exeqry).If your CD is populated from a single table, it would be better to create a Master - Detail relationship (as Abdetu) describes.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Urgent : how to select the rows in the ALV Grid Control

How to select the rows in the ALV Grid control,
I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
If anyone have the solution please help me out
<b>Its very Urgent</b>

Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
    IMPORTING
      et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
    CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
         EXPORTING
              textline1 = 'You must choose a valid line'.
    EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
     READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
    ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
    CALL METHOD go_grid->set_selected_rows
        exporting
          it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan

How to select multiple records in an ALV by REUSE_ALVGRID_DISPLAY

Similar Messages

Maybe you are looking for