How to select packages in the installer? no keys seem to 'select'
so i'm installing arch as we speak; i have configured the keyboard right but when i get to select package groups and selecting packages i cant work out how to 'select' a package!
firstly can someone tell me straightforwardly what key to press to select: so i can check its the system and not me?
thanks for ready the super-noobs question
zom
EDIT:
my bad: i had managed to break the spacebar and didnt realise this was what i needed to press
Last edited by zomzilla (2011-06-14 08:02:06)
I haven't used the official installer in a long time, but "space" should work (that's the key on the unofficial archboot installer).
Similar Messages
-
We have Noticed after our R12.1.1 and upgrade to 12.1.3 Federal is showing up and we did not select it on the installation choices any ideas?
We have a GOLD instance with patches and no data. Can We safely ignore the FV module?
You can but you will need to consider additional steps for this module -- Please see "Even if the customer has no longer purchased a license to use the product .." line in the doc referenced in my previous reply.
How would or Why would it be showing up as installed?
It must have been selected when the installation was done.
Thanks,
Hussein -
When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"
I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.
-
How do you specifically let the Itemlistener know which Item was selected..
How do you specifically let the Itemlistener know which Item was selected in a JComboBox? Anyone has any idea? What should the coding look like?
getSelectedItem()
-
i have new music on the itunes but have not a clue how to put it on the iphone, it only seems to want to put the old songs on
http://support.apple.com/kb/HT1386
Are you manually managing your songs?
In itunes - music do you see checkmarks next to your musis/songs. IF so go find your new songs click on it and then sync your music again. -
how do I access all the Arturia 49 key analog library to Garage Band? I see the analog library but not all the SW instruments?
Alex,
have you tried everything in this thread? The problem seems to be different for everybody:
If nothing helps try dagon's full monty for a reinstall:
Re: GarageBand '11 won't download additional loops
Or a manual download using the Terminal as mteep suggests:
Re: GarageBand '11 won't download additional loops
Léonie -
How do you turn off the keyboard volume key clicks on macbook pro?
how do you turn off the keyboard volume key clicks on macbook pro?
Thanks for the help!!Thanks! That was easy.
All the Best! -
I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?
Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101 -
In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?
Hit the '''F7''' key, you probably have Caret browsing turned on.
http://kb.mozillazine.org/Accessibility.browsewithcaret -
Photoshop is installed on your C partition and how to get it installed on another partition now!
Heinonen Petri you can customize the installation location within the preferences for the Creative Cloud desktop application. Please be aware that the Creative Cloud desktop application and many shared components will always need to be installed to the primary drive containing the operating system.
For additional details on how to customize the installation location please see Creative Cloud Help | Download, install, update, or uninstall apps. -
I am trying to download the free Adobe Reader and I get the message Error1321:The Installer has insufficient privileges to modify the file C:\Program Files (x86)\Adobe\Reader11.0\Readerwow_helper.exe. I do not know how to fix this.
Hi Koncar,
Kindly try the steps mentioned below.
1) Download the Adobe Reader.msi from ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/
2) Run the .MSI for Reader and when you get the error click on Retry and installation would go trough.
Thanks,
Vikrantt Singh -
How do you eliminate back the border width from a given selection?
Perhaps a stupid question, I dont know, but whenever I make a selection and then go to selection>modify>border to select any given width from 1 to 200px, how do you eliminate back any created width? the value 0 is not accepted, only from 1 up. Does this mean I have to deselect everything and start the whole selection back over? that would take a lot of time if my selection was a little complex and took me some time perform it!
I tried "googleing" that answer but couldnt find anyting so I am coming for help here.It's unclear to me what you mean by "Eliminate back". Do you want just the border to extend inside the original selection?
Are you recording an action?
Keep in mind you can save any number of selections under different names via Select - Save Selection, then combine them with the Load Selection function using features like "Overlap" and "Subtract From Selection".
-Noel -
How to to delete 'Continue the installation' alert?
I'm not quite sure how this has happened (most likely some trial I downloaded a while ago),
but for the last two months, when I close my Macbook down I get an alert saying:
'Continue the installation? Choose abort if you wish to cancel the installation.'
Then I get two choices 'Abort' or 'Cancel.'
Of course I always choose 'Cancel.'
How do I get rid of this alert?
Btw, I've tried unchecking "Reopen windows when logging back in" in the restart or shutdown window as in this thread, tom no avail:
https://discussions.apple.com/thread/6743029?q=%27Continue%20the%20installation? %20Choose%20abort%20if%20you%20wish%20to…There's no Delete All function on the iPhone but you can download the free app My Contacts Backup, tap the preferences gear icon on the lower right, scroll to the bottom and tap the Remove all contacts button.
-
After installing Firefox 3.6.16, I received an Adobe Reader update alert that there was an update available. I downloaded the update and then began the installation. During the installation, I received the following alert: "Error 1336. There was an error creating a temporary file that is needed to complete this installation. Folder: C:\Program Files \Mozilla Firefox\plugins\. System error code: 5." This prevents me from installing the update -- at every attempt! Is there a user friendly solution?
I am happy to see another person is having this jerky scroll situation with the latest update to Firefox on October 27. I did check my I.E browser and '''THAT BROWSER''' still does the nice smooth scroll....let's get 'er fixed Mozilla! I know you can!
-
How do i Change only the Installation No from Visual Admin
Hello All,
As my license key for the NWDS expiry's after every 15Days. I have got a new license key but i need to change the Installation No of my older license in order to update it with the new one. or keep it running always with out any expiry.could you suggest what to do.......
Regards,
karthikEric:
Thanks so much! Actually, after I posted this question, I figured it out after much trial and error, plenty of both, and it does work. But your answer confirms for me the path I took.
Maybe you are looking for
-
Video Uploading in oracle database and playing that video in a jsf page
Aoa, I want to upload videos in oracle database and I also want to play those videos using <af:media> tag in JDeveloper 11g. I have an applicaton which stores images in the database and show the images but when I try to upload videos lot of exception
-
Can anyone recommend some server monitoring software
I am looking for some sort of software tool that will allow us to monitor the processor load similar to Activity Monitor but remotely. Server Monitor does not provided that particular function. Can anyone recommend one? Thanks X Serve Mac OS X (10.
-
Hi, Scenario is SOAP-XI->SAP. Here my sender is having a Webserver(Tomcat). Webserver was configured with SSL. It will communicate over HTTPS to target components(in our case it XI). So, here my question is Do XI need to install any kind of digital c
-
Encore Cuts off about 15 minutes of my video after I author it, Please Help!
Hello everyone, I am not really a stranger to Adobe products but I am having a problem with Encore which is driving me crazy. I am authoring a dvd of some home movies and a slide show to send to some relatives as a Christmas gift. I have to send it
-
Ipad update results log in problem
Hi I have just installed the ios 8 and i cant log in to my ipad anymore. I am entering my passcode then it apperas the following: "update completed, there are just a few more steps to follow and then you are done" and then its requesting my apple id