How to select paper type for Canon iP5000 with Leopard and Photoshop CS3.

I have printed photographs quite happily for years on my iP5000 using PS7 and 10.X. However since installing Leopard and switching to PS CS3 I am unable to select paper type (glossy, matt, etc). Is this a 10.5 problem, or as I suspect a CS3 problem. Any suggestions would be appreciated.
I can select paper type in other applications.

I don't know if it is the same for your printer but with my Canon MP600 I experienced the same problem until I came across the fact that when Print is clicked there is a Blue Triangle on the right of the dialogue. Click this and the paper type etc is displayed.

Similar Messages

Laptop monitor choice for photo editing with lightroom and photoshop

Hi,
i'm going to buy a laptop, mostly for photo editing with lightroom and photoshop use.
I'm in trouble with the display choice.
One laptop has LG LP156WF4 or AUO B156HAN01 display, that should be very similar matte ips display with 55%-60% coverage of AdobeRGB. You can find a review in the "Display" section of these link : http://www.notebookcheck.net/Review-Clevo-W650SJ-Schenker-M504-Barebones-Notebook.114329.0 .html
The other laptop hasAU Optronics B156HW01 V.4 Matte 95%, that is a TN matte display with 95% coverage of AdobeRGB. You can find a review in these link (the display should be the green bar): http://www.anandtech.com/show/4649/mythlogic-pollux-1400-clevos-w150hr-tested/6
My question is: which one is better for photo editing with photoshop and lightroom?
Someone says that ips is better because of the fidelity of color reproduction, view angles and contrast.
Someone, on the other side, says that the TN 95% is better because of the gamut%.
Can you help me?
Thanks,
Marco Grechi

Macbook pro is out of budget
Hp assistance said that in italy they don't sell laptop with dreamcolor (i'll call again tomorrow to be sure ) but i think that it would be out of budget (max 2000 euro).
They said that the best solution for me is the zbook 15 g2 (2300 euro), but they DON'T know brand and model of the display and if i can have SSD + HD inside the zbook 15 g2.
The laptop with the lg panel costs 1500 euro. the question is; "i know that the lg display is not the best, but is it almost sufficient for my use?". In this way i may save 500/800 to buy a separated display later.
I have read that dell xps 15 and dell precision m3800 have great display, but they are glossy and very reflective. Is it a big handicap?
Do you know the 3k 15,6" display Panasonic VVX16T020G00 ? It should be a 8-bit display with 72%NTSC gamut ( http://www.panelook.com/VVX16T020G00_Panasonic_15.5_LCM_parameter_22014.html )
Do you sugget me a 3k display for photo editing?
Thanks

Selecting Paper Type for HP Photosmart 8750 In Lightroom 3.3

Since converting to Lightroom v. 3.3 I am unable to select the paper types on which I wish to print from my HP Photosmart 8750 printer. In the printer dialog box, the following option is grayed out: "Photosmart PDE." I also get the following message: "The bundle 'HP Photosmart PDE' could not be loaded because it does not contain a version for the current architecture." It then tells me to contact the bundle's creator for the latest version and then lists the following: HP Photosmart PDE v. 5.3. I would appreciate any thoughts as to what the problem is and how it may be corrected. I have downloaded the most current printer driver and did not have this problem with Lightroom 2, so I am thinking that it must be a compatibility issue between the HP software and Lightroom 3. Thanks.

I inserted photo paper into the printer tray a the start but it printed horribly, like my old canon used to do when I accidentally stuck laser paper in instead of glossy / matte.
Other prints (like from iPhoto) print fine thru the printer.
The Print dialog in the pull down menu contains no options to look at or change the paper type.
On my pc I had a huge section of options when printing where I could select the profile, colour correction, print quality etc etc on any print. Cant seem to find the same options thru Mac.
Still puzzled?!

How to set security type for lenovo working with hotspot?

How to set wireless security type for lenovo laptop working with hotspot?
Since I can connect with the other laptops except this brand.

//add related mutip-part to combine parts
MimeMultipart multipart = new MimeMultipart("related");
//attach a pdf
messageBodyPart = new MimeBodyPart();
fds = new FileDataSource("h:/something.pdf");
messageBodyPart.setDataHandler(new DataHandler(fds));
messageBodyPart.setFileName(fds.getName());
multipart.addBodyPart(messageBodyPart);
//add multipart to the message
message.setContent(multipart);
//send message
Transport.send(message);

How can I get support for Canon Powershot S110 in CS5 Photoshop?

Does anybody know how to get support for using raw files created by Powershot S110 in PS CS5? PS CS5 does not open them and requires an update. However, this camera is not listed in the description of Camera Raw updates (the top model of this series is S100 in the list) and the latest update is also not compatible with CS5.

Which operating system are you using?
Since photoshop cs5 can only use up to camera raw 6.7 and that camera needs at least camera raw 7.3, you'll need the 8.6 adobe dng converter to convert the canon s110 camera raw files to dng copies which then photoshop cs5 should be able to open.
For windows xp, vista or mac os x 10.6.8 use the 8.3 adobe dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
How to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How do you select paper type in Photoshop Elements 10?

Sorry to be a total technotard, but in the olden days, I could select paper type (e.g. glossy photo) from the print menu when printing from Photoshop. I now have a new iMac & Photoshop Elements 10, and there is no way to select paper type, at least not that I can find. Is this an Adobe Elements thing? Cuz I can't figure out how to do it, and it's driving me nuts!!!!!! Thanks in advance for any help.

If you are working in Full Edit you need to have an image open in the main window. Then Click:
File à Print
After selecting your print size and paper size, hit the Print button.
When the system print dialog opens use the Quality & Media and other dropdown menus.

How do I select paper type when printing from Photoshop?

Sorry to be a total technotard, but in the olden days, I could select paper type (e.g. glossy photo) from the print menu when printing from Photoshop. Now there is no way to select paper type, at least not that I can find. Is this an Adobe thing? Cuz I can't figure out how to do it from InDesign either. I'd like to be able contol image quality as well. Thanks in advance for any help... I'm wading around in all these forums trying to find a simple answer and am having no luck...
~Aeron Mack
[email protected]

"hp website says the driver is built-in to the new macs, and I don't need to d/l a new one"
First of all, this is a crock. And a very tiresome one, as it's been used as an excuse not to post drivers for download.
The driver is not "built into" a Mac. There may be some version of it installed IF you happened to install hundreds upon hundreds of gigabytes of printer drivers (the vast majority of which are obsolete and brands you've never nor will ever own) when you installed the OS. This view is just so idiotic, as you won't have installed every HP driver ever made if you didn't own an HP printer or plan to hook it up to that computer.
Apple compounds the problem by not giving you any way to pick and install a printer driver. Seriously, in 2009. And this in addition to the Mac's inability to detect a new printer after you plug it in, and ask if you want to install a driver. People tolerate that while making fun of Windows, which has been detecting new hardware and prompting for drivers since what, 1995?
Anyway, I believe it was HP who complained that they "didn't have room on their servers" to offer drivers for download. Unfrigginbelievable.
Nobody who pays any attention to their printing should even consider an HP printer. That's how incompetent their drivers are, for both platforms.
Sad.

Can't select paper type or output quality when printing from new imac....

Not sure if I'm in the right place to post this question....
When I try to print (from ANY app; Photoshop, InDesign, etc.) to my hp business jet inkjet printer, I get a print menu, but no where on the print menu (or any pulldown tabs) do I have an opportunity to select paper type or output quality. I am unable to print photos, for example.
The printer worked fine with the old PC; there is no driver to d/l for mac.
Only from iPhoto can I select paper type (from a limited number of choices), but not from any other app on my imac. I mostly use InDesign and print flyers and brochures, many with photos, and can't select anything other than plain paper. Do I need a new printer? Genius bar 'help' said they had no idea why it wasn't working....
HELP!!!
Thanks!

Hi Duane,
Yes, I opened the Printer Driver package, and then pulled up my test InDesign file and selected File>Print, and here's the screen i get: (hope this works, I'm trying Skitch for the first time)...
[img]http://img.skitch.com/20100219-8ywf49rxkh7heg86n25gefbydc.preview.jpg[/img]
Click for full size - [color=#A7A7A7]Uploaded with plasq's Skitch[/color]
when I click on "Setup" in the print menu box, I get this screen:
[img]http://img.skitch.com/20100219-pgqjnjt1anrx2xic3pih9def3y.preview.jpg[/img]
Click for full size - [color=#A7A7A7]Uploaded with plasq's Skitch[/color]
I've clicked on each topic on the left on the Print menu, and still there is no where to select paper type or output resolution.
The same thing happens when I print from Photoshop.
Thanks.

Trouble changing paper type for printing

I downloaded Photoshop Elements 11 to a new computer (with much more memory and speed that old computer) but now Photoshop does not work as well. When I try to change the paper type for printing, the setting is stuck at "plain paper" and there are no other options available. Any ideas on how I can fix this problem?

It sounds like a printer driver issue, not a PS issue. Can you update your printer driver on the new computer?

How to set raw format for canon powershot a1100 is ? ,,according to the specs online it can.

how to set raw format for canon powershot a1100 is ? ,,according to the specs online it can.

It requires the Canon Hacker's Developement Kit (CHDK). It runs off of your SD card and does not harm your camera. Download a program called Stick-
http://zenoshrdlu.com/stick/stick.html
Follow the directions and you will be able to shoot in RAW along with some other deatures not available on your camera previously.

How to get wage type for every time record

Hi Pros,
I am using DS 0CA_TS_IS_1, it includes report time type (0REPTT), but not have wage type. in CATSDB, I fied fields for attendance/absence type and wage type. but not every time record has wage type. can you please tell me how to get wage type for every time record? what is relation between reporting time type, attendance/absence type and wage typs?

Hello,
Can you talk to your HR/T&E functional consultant if they populate these values in CATSDB table using standard way or if there are custom fields that are in CATSDB OR any other table which can be used to meed the requirements
Thanks
Abhishek Shanbhigue

How to create a record for table PLAF with order type 'NB'.

How to create a record for table PLAF with order type 'NB'(standard purchase order).
who can tell me the T-code or some usefull information?
Thanks.

Hi
This will be updated automatically when generate planned orders thru MRP. (MD02)
regards
Srinivas

How is the storage type for a component picked automatically in PO staging

Hi
The Process cycle is :
Sales Order created MRP-Planned Order ---Production Order
Problem : Transfer Requirement not created for Picking
Now if I go to Co03--GOTOWM Pick list , For the component the storage type is notr updated automatically
I compared with Materials for a TR was created & found that Storage type 100 was updated automatically
Q:How is the storage type for a component picked automatically in PO staging (WM activated )

Hi Rajesh
Thanks for your inputs . Actually I forgot to mention that the client is not using Storage type in any of the material master data
The problem was because the control cycle was not maintained for the combination of material /Plant & Supply Area
Anyway thanks for your info .Appreciate your cooperation
Arindam

How to select XML value for a namespace when multiple namespaces

Hi,
I'm a beginner with this, but I'm doing well with your help from this forum in a recent post selecting out all the detail from my xml
out into my oracle relational tables. Stumped, though, on how to select a value for xml tag value referenced by a defined namespace.
Version, XML, what I want to select, and attempted sql is below. Thanks in advance!
select * from V$VERSION
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
drop table TRANSCRIPT;
create table TRANSCRIPT (
CONTENT xmltype
<?xml version="1.0" encoding="UTF-8"?>
<arb:AcademicRecordBatch xmlns:arb="urn:org:pesc:message:AcademicRecordBatch:v1.0.0">
<hst:HighSchoolTranscript xmlns:hst="urn:org:pesc:message:HighSchoolTranscript:v1.0.0" xmlns:ct="http://ct.transcriptcenter.com">
   <TransmissionData>
      <DocumentID>2013-01-02T09:06:15|D123456789</DocumentID>
   </TransmissionData>
   <Student>
            <Person>
                <Name>
                    <FirstName>John</FirstName>
                    <LastName>Doe</LastName>
                </Name>
            </Person>
            <AcademicRecord>
                <AcademicSession>
                    <Course>
                        <CourseTitle>KEYBOARD 101</CourseTitle>
                        <UserDefinedExtensions>
                          <ct:TranscriptExtensions>
                             <NCESCode>01001E010456</NCESCode>
                             <CourseRigor>1</CourseRigor>
                          </ct:TranscriptExtensions>
                      </UserDefinedExtensions>
                    </Course>
                    <Course>
                        <CourseTitle>SCIENCE 101</CourseTitle>
                        <UserDefinedExtensions>
                          <ct:TranscriptExtensions>
                             <NCESCode>01001E010457</NCESCode>
                             <CourseRigor>2</CourseRigor>
                          </ct:TranscriptExtensions>
                      </UserDefinedExtensions>
                    </Course>
                </AcademicSession>
                <AcademicSession>
                    <Course>
                        <CourseTitle>MATH 201</CourseTitle>
                        <UserDefinedExtensions>
                          <ct:TranscriptExtensions>
                             <NCESCode>01001E010458</NCESCode>
                             <CourseRigor>2</CourseRigor>
                          </ct:TranscriptExtensions>
                      </UserDefinedExtensions>
                    </Course>
                </AcademicSession>
         </AcademicRecord>
   </Student>
</hst:HighSchoolTranscript>
</arb:AcademicRecordBatch>I want to be able to select the NESCODE associated to each coursetitle (01001E010456, 01001E010457, 01001E010458), with NESCode defined by namespace, but getting out NULL.
DOCUMENTID     LASTNAME     COURSETITLE     NCESCODE
2013-01-02T09:06:15|D123456789     Doe     KEYBOARD 101
2013-01-02T09:06:15|D123456789     Doe     SCIENCE 101
2013-01-02T09:06:15|D123456789     Doe     MATH 201
My SQL is below. You'll see where I commented out a couple failed alternatives too. Thanks again in advance for any guidance.
   select x0.DocumentID
         ,x1.LastName
         , x3.CourseTitle
         ,x3.NCESCode
from TRANSCRIPT t
     , xmltable(
         xmlnamespaces(
           'urn:org:pesc:message:AcademicRecordBatch:v1.0.0' as "ns0"
         , 'urn:org:pesc:message:HighSchoolTranscript:v1.0.0' as "ns1"
        --, 'http://ct.transcriptcenter.com'                               as "ns1b"
      , '/ns0:AcademicRecordBatch/ns1:HighSchoolTranscript'
        passing t.content
        columns DocumentID       varchar2(40) path 'TransmissionData/DocumentID'
                   , Student xmltype      path 'Student'
      ) x0
   , xmltable(
        '/Student'
        passing x0.Student
        columns LastName varchar2(20) path 'Person/Name/LastName'
                    ,AcademicRecord   xmltype      path 'AcademicRecord'
      ) x1
   , xmltable(
        '/AcademicRecord/AcademicSession'
        passing x1.AcademicRecord
        columns GradeLevel varchar2(20) path 'StudentLevel/StudentLevelCode'
              , Courses      xmltype      path 'Course'
      ) x2
          , xmltable(
          xmlnamespaces('http://ct.transcriptcenter.com' as "ns2b")
          , '/Course'
        passing x2.Courses
        columns CourseTitle varchar2(40) path 'CourseTitle'
                     ,NCESCode varchar2(20) path 'UserDefinedExtensions/ns2b:ct/NCESCode'
                     --,NCESCode varchar2(20) path 'UserDefinedExtensions/ns2b:ct/TranscriptExtensions/NCESCode'
      ) x3


<<I'm assuming there is more to your XML than you showed, since
StudentLevel/StudentLevelCode
is not in the XML, but is in your query. >>
Yes, to simplify, I left out some of the additional XML data, which is typically present, sorry for any confusion. I should have removed those references to that data in my example which was failing to retrieve the NCESCode data which was denoted by that namespace.
Thank you very much! Your correction worked. I was not understanding until your correction how to properly reference in the XPATH for that namespace value. I'm a newbie at this, and this is my second post. But I've been able to populate quite a few relational tables and that was the first of several namespace tags I will have to deal with next, and with that help, I should be good with that syntax now.
Thanks again for your help on this.

How to select paper type for Canon iP5000 with Leopard and Photoshop CS3.

Similar Messages

Maybe you are looking for