How to select the Alt BOM in the Sub-Contract PO

Dear All,
please tell me how to select the alternative BOM in the sub -contracting purchase order.
for the above said requirement i have cretaed production versions and the BOMselction method also i have selcted in the material master data as "2" means BOM by produ ction version.
so how can i select the alt BOm in theSub-contracting PO.
Thanx in advanvce
regards
Srinivas

Hi,
SAP help says you have to write the production version in the subcontracting info record:
http://help.sap.com/saphelp_46c/helpdata/en/b2/fa1ed4d51d11d1a69e0000e83235d4/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/b0e96787a62488e10000009b38f9b7/frameset.htm
(I've checked a subcon-info record but sorrowfully I havent found a field for this...if you can find please let me know)
BR
Csaba

Similar Messages

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

How to create an alternative bom for the same product

Hi expert,
I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
Please help me solve the problem.
Thanks in advance for any assistance.
George shi

HI
you can go with t-code CS01
if you have the BOM already and you want to create the alternative BOM then just goto create BOM
and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
then next system will prappose 2.
then you can enter the components as per you requirement
if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
prodcution version you need to craet from mateial master
each version you can go woith alternative BOMS
Version 1 will have alt BOM1
Version 2 can haev ALT BOM2
-ashok

Accomodate the changed BOM in the purchase orders

Hello,
I have the 2000 subcontracting purchase orders created with the Old BOM. The BOM was changed in the inbetween. How do I update the purchase orders in a single transaction, I do not want to go in all the Purchase orders and change the PO manually.

LSMW and SECATT are standard transactions.
Not everything is possible ot change with MASS transaction.
It is quite unusual to have 2000 open POs with wrong bill of material.
How did you create thiose 2000? Manually? how many weeks did it take?

Is there a way to change the Alt key to the Ctrl Key?

Is there a to access the Alt key screen functions (the quick Eyedrop, (holding Alt and click the color) and the Zoom in and Zoom out (holding alt alt and scrolling with the mouse wheel) with other key instead of alt, for instance the Ctrl key?
It is really annoying to me to deal with it, because in my shortcut configuration I use the keys "Q" and "W" to increace and decrease the size of the brush and the keys "A" and "S" to increase and decrease the hardness of the brush. What happens is that when I hold Alt to pick a color or to zoom, it calls the menu bar's shortcuts (it underlines the menu shortcuts) , so If I do so and press "S" it calls the Select menu, which is not what I'm trying to do.
In Gimp, the pick a color and zoom in and zoom out actions are configured to work with the Ctrl key instead of Alt, so the shortcut menus are not an issue. Is there anyway to switch it to Ctrl? Is there anyway to make the Alt stop calling the menu bar?
Thanks

Hello, Other than a keyboard remapping software, you might be out of luck.

When I use the Alt key and the clone tool, I get a message that I did not use the Alt key to define

Whe I use the Alt key with the clone tool, I get a message that I have to use the Alt key to define the area to be copied. What am I doing wrong?

I tried to check the alined box, but it would not work. I was able to check
the Sample box, but they they give you about 5 choices to check and I have
no idea what they are all about. I appreciate your help.
Dino
In a message dated 9/18/2012 11:09:06 A.M. Eastern Daylight Time,
[email protected] writes:
Re: When I use the Alt key and the clone tool, I get a message that I did
not use the Alt key to define
created by hatstead (http://forums.adobe.com/people/hatstead) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4707426#4707426)

How to select, with a SUD DIALOG, the range and the trace data to import from citadel

Hello,
I use DIAdem to generate reports from Citadel and I would like to create a script which asks the user to select data and it's corresponding range to import it from citadel. The script should display a dialog box (sud dialog), the user will choose the data and the range.
I would like to know if a function exists because up to now, I have not found anything suitable for this.
In my search i found this (see answer from Brad Turpin) http://forums.ni.com/ni/board/message?board.id=60&message.id=985&requireLogin=False
But I don't know how to automatize it with sud dialog
I am looking for information and examples on the subject.
Thanks

Hello,
I changed the data base path, when I run the script an error message appeared (see attached file). When I look the dataportal files, I see that the complet data is charge and not a window (see attached file). have you any idee?
Attachments:
error load citadel function.pdf ‏455 KB
view.pdf ‏279 KB

How to select values frm table giving the condition value at runtime in SQL

Hi All,
How to select values from a table by giving the condition value at runtime in SQL
My SQL statement is select * from employee where empno=<empno>, this empno I want to provide at run time. Also I don't have any bind variables defined. Can anyone please tell how can I achieve this. Also do I have to write a SQL or pl/sql statement.

Hi Roshni Shankar,
You can use substitution variable in case of SQL.
SQL> select * from employees where emplployee_id = &emp_id;
Enter value for emp_id: 100
old   1: select * from employees where emplployee_id = &emp_id
new   1: select * from employees where emplployee_id = 100If you want to put condition on varchar values then eighter provide values in single quotes or use single quote for substitution variable.
SQL> select * from employees where last_name = &emp_name;
Enter value for emp_name: 'King'
old   1: select * from employees where last_name = &emp_name
new   1: select * from employees where last_name = 'King'
no rows selected
SQL> select * from employees where last_name = '&e_name';
Enter value for e_name: King
old   1: select * from employees where last_name = '&e_name'
new   1: select * from employees where last_name = 'King'In case of pl/sql you can pass values to procedure and you can use those values at run time.
create or replace procedure test (p_emp_id number)
as
   v_last_name      varchar2(100);
begin
   select last_name
   into    v_last_name
   from employees
   where employee_id = p_emp_id;
   dbms_output.put_line(p_emp_id ||'    ->    '||v_last_name);
end;
show errors
SQL>exec test(100);
SQL>exec test(101);Edited by: Gaurav Bhide on Oct 29, 2012 4:07 AM

How to select values if I know the fieldname in PL*SQL? [SOLVED]

There was a simple trick in SQL*PLUS:
DEFINE var='EMP_NUMBER';
SELECT &var FROM emp;
And the result was the same as:
SELECT emp_number FROM emp;
Does anybody know how to write this in PL*SQL procedure? I didn't find any similar things in forum... I have db8i and 10g.
m.

Thank's a lot! I found this usefull article on Metalink as well:
Subject: Dynamic SQL
Doc ID: Note:62592.1 Type: BULLETIN
Last Revision Date: 06-MAR-2007 Status: PUBLISHED

How to select Vendor information as per the line item of the shopping cart

SRM ABAPers,
I want to create a custom report and needs to produce SC's item details with vendor's information.
So I want to select the vendor information(including the partner function- 00000019 or 00000039) as per the line item of the shopping cart, which SRM table can give me this information?
Thank you!
MP

Hi,
To get the SC item details,you an use the FM 'BBP_PD_SC_GETDETAIL".
Also to get the vendor details,you can use the FM "BBP_PARTNER_GET_PURCH_DATA_NEW".
BR,
Disha.
Pls reward points for useful answers.

How to select a random cell in the DataGridView?

Good day
I am new to the DataGridView control. I was wondering if one can select a random cell in the DataGridView and if it is possible can someone help me with the code or a link to do it please.
Thank you.

Hi Arno du Toit,
Use the following code, you can select the specilized cell.
DataGridView1.CurrentCell = DataGridView1.Rows[rowindex].Cells[columnindex];
Select a random Cell?
Random rnd = new Random();
int rowMax = DataGridView1.Rows.Count;
int colMax = DataGridView1.Columns.Count;
if(rowMax > 0 && colMax > 0)
int row = rnd.Next(1, rowMax); //get the random row index
int column = rnd.Next(1, colMax); //get the random column index
DataGridView1.CurrentCell = DataGridView1.Rows[row].Cells[column];
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to select all single values in the header area

Dear Experts
I got a request that the user wants to select a single value or all single values in the header area. E.g. if the values from characteristic master data are A, B, C and D, the selection can be one of these values or all of them. With the standard BPS configuration, due to the unique combination in the header area, selection of 'All' single values is not possible. Is there a way to select all single values in the header area?
Thanks, Jessica

Hi Jessica,
Here is a solution where you need not to change your planning layout or to create a new variable or any exit function.
Step 1 - Maintain master data value 'ALL' in the required characteristic.
Step 2 - Create a copy function to copy all the required data records to 'ALL'. you can use standard copy function where you have to include only this characteristic in the fields to be change.
Copy -
From = all values (A,B,C,D etc)
To = "ALL".
Step 3 - Call this function on layout opening. you can include it in the planning folder and change the function attribute to call it on layout opening.
Step 4 - Create a standard Delete function. you have to call this function on save operation. In this function, you have to delete all data records present in the buffer where required char contains 'ALL' value.
This approach can impact the performance of the planning application. It depends on the number of data records you are dealing with. Standard Copy and Delete functions are pretty fast in nature.
I hope it will help you. please let me know if you need more inputs.
Regards
Tarun

H ow toTrack the "UOM" & RM details during sub contracting..

Hello experts,
There is a scenario where in like am facing with my clients,
my client company is a manufacturing company, as if now 75% of job was done through sub-contract only, and 25 % of job was done in their own warehouse,so they want to tack their item which is going out for sub-contracting, (for example) they are transferring their raw materials in "KILOGRAM" to sub-contractors, while receiving as semi finished they get in "Numbers". so i want to Track the "UOM" as well consuming of raw materials also.
kindly advice how to map this scenario..
Regards
chandru
Edited by: chandrasekhar Subramaniam on May 15, 2009 8:00 AM
Edited by: chandrasekhar Subramaniam on May 15, 2009 8:02 AM

Hi Chandrashekhar,
You need to create BOM-Bills of material for that activity (changing RM item to Semi Finished item) and complete the production process.
In BOM definition you need to mention Semi finished item as Parent Item and RM as Child Item.By doing this you will have the different UOM as both the items are different.
You can create new warehouse with name of sub-contractor, and use in above process to track material lying with sub contractor.
You will have to track other commercial activities separately, like creating Purchase Order on the name of Sub-contractor for services, and completing the Purchase cycle there. Where as stock level transactions are to be create by posting BOM,Production Order,Issue for Production(RM in KG to Sub contractor whare house),Receipt from Production(Semin finished item in No. to main ware house).
Hope by following above steps you can do the desired functionality.
BR
Samir Gandhi

No BOM explosion for sub-contract purchased materials

Hello,
I have searched google and this forum and have not found any info on this. Hopefully someone has run across this same situation and can help.
We do not want to have a bom explosion happen for externally procured materials (using CU51). We are using user exit CCUX0800 (EXIT_SAPLCUKO_008) to set no_expl_ext_procurement = 'X'. This works good, except if the material is set up for external procurement (marc-beskz = "F") and also has a special procurement (marc-sobsl) of "30". Include LCUKOFFB says to still explode the BOM if the special procurement is "30".
Does anyone know why it does this? We don't want the bom to explode for externally procured parts even if they are set up as subcontracting ("30"). Any way we can do this with a different user exit?
Thank you.

Melissa,
Since you are using Special proc 30 ( subcontracting) system assumes BOM components will be supplied by purchaser.
When a Subcontract purchase order for subcontracted material is cut on vendor, the components of the subcontrated product is typically supplied by buyer to the vendor. Hence MRP(system ) typically explodes BOM to plan for those compoments in buyer's plant.
If however you do not want BOM to be exploded &/or components planned in buyer's plant you can set that in BOM of subcontract material at the component level. In the BOM component item detail screen (under tab status/long text) there is a field called Material provision indicator. Set that to L(material provided by vendor).
This should prevent planning of components (or explosion of BOM) for the subcontract material ( with settings F, 30).
Hope this clarifies & solves your issue. else please come back with further questions.
Thanks,
Ram

How do select and unselect songs in the new itunes?

i got the new itunes and i cant find the checkboxes on the side in my library. if i select my device an then "on this ipod" it shows the boxes but i cant select or deselect them. help?

Domninique,
Go to Edit > Preferences > General, and check "Show list checkboxes."

How to select the Alt BOM in the Sub-Contract PO

Similar Messages

Maybe you are looking for