How to select which RFC USERS have been accessed my host ?

Hi, guru
how to select which RFC USERS have been accessed my host ?
or how to record the RFC users's trace ?
because the auditor wants to know it.
Best regards,
Michael

how to select which RFC USERS have been accessed my host ?
did you check ST03N->User profile ?
or how to record the RFC users's trace ?
Check ST01 for system trace.

Similar Messages

How do see which t-codes users have been accessing ?

Hi folks
I have been asked to run a report by user name showing which t-codes have been used, say in the last 90 days.
Is this possible? Or is this information available in a table somewhere, If so what is the table name and key fields needed.
Layout would need to be something like:
User name
T-code Date Accessed Time Accessed
xxxx xx.xx.xxxx xx.xx.xx
Thanks for any advise.
Points awarded for helpful answers !
Regards
Steve
Edited by: Steven Lawrence on Jun 27, 2008 12:08 PM

Hi folks
Hi,
Transaction execution is histroy is not stored in any table, but it is only stored at server level in binary format. This file gets formatted when ever application server is Restarted.
You can access execution histroy data using STAT (upto 4.7) /STAD (above 4.7)

How many users have been logged on by this month

I need to do a list of the users have been logged on by this month in the central instance and in the application servers. Someone can help me? I will apreciate your answers.
Best Regards.

Hi Reynaldo,
transaction SUIM > Users >users with complex selection criteria
Fill in the right parameters.
Regards,
Jeff

How we will know whether RFC destinations have been created for sender and

Hi,
How we will know whether RFC destinations have been created for sender and XI system.
Thanks,
dhanush.

Hi Dhanush,
you can check using the TCODE SM59.
Regards
Kenny

Installed new update iTunes Saturday - My file directory could not be found, so reset the directory path, 'it' asked me if I would like 'it' to re organise filing, I selected yes - Many tunes have been duplicated, some have disappeared. Any help?

Hi,
Installed a new update iTunes Saturday - My file directory could not be found, so I reset the directory path, and 'it' asked me if I would like 'it' to re organise my filing, foolishly (as a beginner, without checking) I selected yes - Many tunes have been duplicated, some have disappeared? Trawled through lots of misleading help files, mailed friends, tried many back routes into Apple web sites and they all wasted my time. Can anyone help?
I have discovered since then, that this resorce has been down over the weekend, which probably explains why I have had so many contradictory responses, so apologies if you all know what the prolem is.
My question is, my TIME MACHINE (which has not been used yet) was tried but looked nothing like that of the U Tube demo, so I am assuming that it needs setting up, however, it has been saving, I just do not know how to recover the data. Can anyone help?
Regads,
Cyfrommayo

(If you have a Time Machine backup, go to your User folder/Music/iTunes and select iTunes. Enter Time Machine and go to a backup of iTunes before the above happened. Then select 'Restore' on the bottom right.)
Eric,
Many thanks for your help.
Apologies for not being as skilled as you. I am unable to see what you are saying, can I ask, should I be in TIME MACHINE when I go to User folder/Music?iTunes or iTunes or Finder?
Cyfrommayo

Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528ASQ
Revision:          AP24
Serial Number:                      6V***5JR
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Failing
<Edited By Host>

If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case.

How do I save photos that have been synced to my Ipad2, so that they do not get deleted when I sync with a different photo file on my computer.

How do I save photos that have been synced to my Ipad2, so that they do not get deleted when I sync with a different photo foder on my computer (Pc win7).

Place that first folder of photos that you synced to the iPad within the main folder of photos that you sync from and select them to sync again. You can place any number of subfolders within the main folder that you sync from and select those folders to sync. Just "tick"(select) the folders in the photos tab in iTunes.
iOS and iPod: Syncing photos using iTunes

How do I know my contacts have been backed-up before I update to the new software? i tunes tells me I have to erase and restore, I'm afraid of loosing contacts.

How do I know my contacts have been backed-up before I update to the new software? itunes tells me I have to erase and restore, I'm afraid of loosing contacts.

you can sync your contacts and things under your own itunes and your wife can have her own... or both in one as long as you have it synced in the same computer they will be there
if you name ur phones its easier to tell which is which
my husband kids and i all have our names and then iphone next to it and it creates a different backup for each and then we update and we restore from there it lets you choose which backup you want...
hope it helps!!

HOW DO I FIND FILES THAT HAVE BEEN TRANSFERED FORM MY PC TO MY MAC

How do i locate files that have been transfered from my PC to my new MacBook Pro

Depends how they were transferred. If you used Migration Assistant, a new user was created. Look there in your documents folder. If you used Setup Assistant, look in your documents folder.

Check which data records have been updated or created by the business rule.

Dear all,
   Is there any way to check which data records have been updated or created by the business rule?
   For ex:
   When I run a data package which execute some standard store procedure and the log shows :
Executing SPRUNCONVERSION 'LEGALAPP', [ACTUAL], [GGGG],'GLOBAL','SPSCOPE_42412','SPLOG_125272'
SPRunConversion Version 2.06
20071200 - 210 Rows Calulated
20071200 - 84 Rows Updated
Anyway to see the data content of "84 Rows Updated "?
Best Regards,
Jeff

Yes each aplication has 3 fact tables:
FACTWB:Real time storage, when you send data it is stored here and this is linked to the FACTWB partition in OLAP which is a ROLAP partition to enable real time updates of the data.
FAC2: Short term storage. If too many records are in the FACTWB the aplication becomes slow because these records need to be queried by the OLAP engine everytime new records are send to the database. To clean up te real time storage you can do a lite optimize, which will move the FACTWB records to the FAC2 partition. this lite optimize can be done even when users are in the system.
FACT: this is the long term storage. When your reporting is finished you can run a full optimize to clean up both FACTWB and FAC2 tables and store it in the FACT table. This contains all your historical records.
Evertime you run a reort, SAP BPC is looking at all 3 partitions and combines the data of the 3 partitions to present the correct value in your report. Remember that BPC is posting differences in the WB and not the final values. So if you have for example a record with 10 in the FAC2 partition and you send 12 to the database for that intersection, BPC will post only 2. When running a report it combines the 10 and the 2 which makes 12.
Hope this makes it more clear.
Joost
Edited by: Joost Hoppenbrouwers on May 6, 2008 12:19 PM : Seems that James and I where writing pretty much the same post at the same time

How to know which version Netweaver is been installed in the system

How to know which version Netweaver is been installed in the system.
I wanted to know whether i have installed NW04 SP Stack 13 or higher.
Suggestions / Hints are wellcome
-Naren

hi,
Pretty simple yar
In portal goto>sysconfig>support-->u can find the Version in the content area at the bottom.
There u find the SAP WAS version and EP version.
in NWDS
goto help---->About sap NWDS -->then popup will disply you find the version.
Vesion: 2.0.14 like
Thanks,
Lohi.
Message was edited by:
Lohitha M

SAP report showing sales orders on which pricing conditions have been chang

Is there a SAP report that shows a list of sales orders on which pricing conditions have been changed.
My knowledge is:
Review pricing condition transaction data table (KONV) helps is some way.

Hi Ashish,
I don't know any such a report, but I guess you can play arround with table CDPOS.
Change doc. object = VERKBELEG
Table Name = KONVC.
Actually this will take lot of time.
Thanks,
Mandar

How do I get CDs that have been imported into iTunes library to sync/transfer to phone?? very frustrating and any help would be appreciated. all the material i purchased from itunes transferred fine, but CDs won't. Please help!

How do I get CDs that have been imported into my iTunes library to sync/transfer to my iPhone?? All the material that I purchased from iTunes has transferred just fine, but although the CDs will import to iTunes, they will not sync up with my phone. How do I do this?? I am very frustrated and would greatly appreciate any help.

In what format did you import the cds?
I have never had an issue with this.

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

Can I select which components will have auto binding turned on?

To be honest, the only reason I don't use JDeveloper full time is due to this reason only.
Can I select which components will have auto binding turned on?
I don't see the need or reason to bind every single component in the page to your backing bean.
This can clutter up your backing bean and all the searching for the bindings that I do care about is a real time waster.
I've looked at the preferences and settings without much luck, thus I'd appreciate any thoughts on this topic.
Thanks,
--Todd

To make sure I understand your response, your refering to Managed Beans as your Backing Beans - I thought the two were the same thing.
Moving on, that is a good idea and I'll try it right now in a test project.
Thanks,
--Todd

How to select which RFC USERS have been accessed my host ?

Similar Messages

Maybe you are looking for