How to select with ruler mm

#target photoshop
app.preferences.rulerUnits = Units.MM;
var w = activeDocument.width.value;
var h = activeDocument.height.value;
selReg = [[0,0 ],[0 ,h ],[w ,h ],[w,0 ]];
activeDocument.selection.select(selReg);
I would like to make a selection with ruler mm.
But I can't.

You may have to calculate the pixel values for your mm-values (taking the image’s resolution into account).

Similar Messages

How to select, with a SUD DIALOG, the range and the trace data to import from citadel

Hello,
I use DIAdem to generate reports from Citadel and I would like to create a script which asks the user to select data and it's corresponding range to import it from citadel. The script should display a dialog box (sud dialog), the user will choose the data and the range.
I would like to know if a function exists because up to now, I have not found anything suitable for this.
In my search i found this (see answer from Brad Turpin) http://forums.ni.com/ni/board/message?board.id=60&message.id=985&requireLogin=False
But I don't know how to automatize it with sud dialog
I am looking for information and examples on the subject.
Thanks

Hello,
I changed the data base path, when I run the script an error message appeared (see attached file). When I look the dataportal files, I see that the complet data is charge and not a window (see attached file). have you any idee?
Attachments:
error load citadel function.pdf ‏455 KB
view.pdf ‏279 KB

How to select with multicast

If I define a type of object and create a view using it:
+++++++++
create view v1 as
select cast(multiset(select
m.name as mName,
m.id as mId
from mtable m as mlist) mlst
from sometable
+++++++++
is it possible for me to select the above view by using the where statement on the mName or mId?
I try this and did not work:
select * from v1 where mlst(mName) = 'a'
What should the syntax be?
Thanks.

Check the view (VIEW1) definition. Anyway, since I do not know your data here is a complete set of code that will work.
DESC USER_OBJECTS Name            Null?    Type
OBJECT_NAME              VARCHAR2(128)
SUBOBJECT_NAME           VARCHAR2(30)
OBJECT_ID                NUMBER
DATA_OBJECT_ID           NUMBER
OBJECT_TYPE              VARCHAR2(19)
CREATED                  DATE
LAST_DDL_TIME            DATE
TIMESTAMP                VARCHAR2(19)
STATUS                   VARCHAR2(7)
TEMPORARY                VARCHAR2(1)
GENERATED                VARCHAR2(1)
SECONDARY                VARCHAR2(1)
create or replace view my_view as 2      select * from user_objects
3 /
View created.
create or replace type my_type as object ( 2       OBJECT_NAME      VARCHAR2(128),
3       SUBOBJECT_NAME   VARCHAR2(30),
4       OBJECT_ID        NUMBER,
5       DATA_OBJECT_ID   NUMBER,
6       OBJECT_TYPE      VARCHAR2(19),
7       CREATED          DATE,
8       LAST_DDL_TIME    DATE,
9       TIMESTAMP        VARCHAR2(19),
10       STATUS           VARCHAR2(7),
11       TEMPORARY        VARCHAR2(1),
12       GENERATED        VARCHAR2(1),
13       SECONDARY        VARCHAR2(1)
14   )
15 /
Type created.
create or replace type my_tbl_type as table of my_type 2 /
Type created.
declare 2     my_array    my_tbl_type := my_tbl_type();
3 begin
4     select my_type(OBJECT_NAME, SUBOBJECT_NAME, OBJECT_ID, DATA_OBJECT_ID, OBJECT_TYPE,
5                    CREATED, LAST_DDL_TIME, TIMESTAMP, STATUS, TEMPORARY, GENERATED, SECONDARY)
6       bulk collect into my_array
7       from user_objects
8      where object_type = 'TABLE';
9 end;
10 /
PL/SQL procedure successfully completed.

How to "select" with case ignored???

Hi everyone, I need to select a field from table, but the data might be written in low case or upper case, even mixed case. for example, i want to select "test" or "TEST" or "Test" in column, what should I modify in my sql "select column1 from tableA where column1 = 'test'" ???
Thanks in advance

How about ignoring punctuation marks etc. E.g. search for ABC yields A.B.C. , A-B-C, A B C, and other combinations if present. Does a tool which does something similar exist?

How to set up rules/conditions on a drop down box to ensure its been filled if a value in a text box is selected.

Hi, I am in midst of creating a form in infopath. I have a text box field in which the user will enter the number of issues he has. if the user has entered the number of issues he has, then he will need to select the type of issues from a multi selection
box. Thus i need to know how to set up rules/conditions to ensure that the user has to complete the multi selection box if he enters a value in text box for the number of issues.

I assume what you are asking is to make multi selection box as mandatory. If not please explain with a example
Try below:
http://webcache.googleusercontent.com/search?q=cache:ItIYeZ8K2gEJ:sharepointkings.blogspot.com/2013/06/make-multi-select-list-box-required-in.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-beta
If this helped you resolve your issue, please mark it Answered

How to select all the colomns_names from a table, with their datatypes ..

hi :)
i would like to know, how to select in SQL all the columns names from a table with their datatypes so that i get something like this :
Table 1 : table_name
the column ID has the Datatype NUMBER
the column name has the Datatype Varchar2
Table 2 : table_name
the column check has the Datatype NUMBER
the column air has the Datatype Varchar2
and that has to be for all the tables that i own ! ..
P. S : i m trying to do this with java, so it s would be enough if you just tell me how to select all the tables_names with all their colums_names and with all their datatypes ! ..
thank you :)
i ve heard it can be done with USER_TABLES .. but i have no idea how :( ..
Edited by: user8865125 on 17.05.2011 12:22

Hi,
The data dictionary view USER_TAB_COLUMNS has one row for every column in every table in your schema. The columns TABLE_NAME, COLUMN_NAME and DATA_TYPE have all the information you need.
Another data dictionary view, USER_TABLES, may be useful, too. It has one row pre table.

How to create a link with 2 choices in Xcode: one selected with UICollectionViewController and the other with UITableViewController

Hi
I want to create a app redirecting to my mebsite.This app permit to select a "area" selected on a UICollectionViewController, and an "event" selected with a UITableViewController.
I need to integer both informations on the FinalViewController (called in my app AnnoncesViewController) =>
The fisrst array is selected on CollectionViewController:@"http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=e vents&Itemid=0&ohanah_venue_id=21"
The second array is selected onUITableViewController:@"&ohanah_category_id=1&textToSearch="
The final array must be:http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=eve nts&Itemid=0&ohanah_venue_id=21&ohanah_category_id=1&textToSearch=
How can I integer these 2 NSArray to obtain this result to link to a UIWebView as FinalViewController?
Thank you for your help!!
My App is on Drobox:https://www.dropbox.com/s/43l1p2hj5bqamvn/Carnet%20du%20Jour.zip
Gracefully
RémySpehler

Hi
I want to create a app redirecting to my mebsite.This app permit to select a "area" selected on a UICollectionViewController, and an "event" selected with a UITableViewController.
I need to integer both informations on the FinalViewController (called in my app AnnoncesViewController) =>
The fisrst array is selected on CollectionViewController:@"http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=e vents&Itemid=0&ohanah_venue_id=21"
The second array is selected onUITableViewController:@"&ohanah_category_id=1&textToSearch="
The final array must be:http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=eve nts&Itemid=0&ohanah_venue_id=21&ohanah_category_id=1&textToSearch=
How can I integer these 2 NSArray to obtain this result to link to a UIWebView as FinalViewController?
Thank you for your help!!
My App is on Drobox:https://www.dropbox.com/s/43l1p2hj5bqamvn/Carnet%20du%20Jour.zip
Gracefully
RémySpehler

How to apply business rules with out breaking to patch missing data

Hello Experts,
I am very new to SQL And i have no idea how to apply below rules
Data is polling for every 5 minutes so 12 time intervals per hour 6:00 -->1
6:05---->2
6:50---->11
6:55---->12
6:50---->11
Missing value
Patching
Rule
No values missing
No patching
0
Time interval 1 is null
Time interval 1 is patched with the value from time interval number 2 subject to this not being null.
1.1
Time interval 12 is null
Time interval 12 is patched as the value of time interval 11 subject to this not being null.
1.2
Time intervals 1 and 2 are null
Time interval 1 and 2 are both patched with the value of time interval 3 subject to this not being null
1.3
Two consecutive time intervals (excluding both 1 & 2 or both 11&12) are null e.g. time interval 3 and 4 are null
Average the preceding and succeeding time intervals of the missing 2 values. If time intervals 3 and 4 are null then these become the average of time intervals 2 and 5.
1.4
Time intervals 11 and 12 are missing
Time interval 11 and 12 are both patched with the value of time interval 10 subject to this not being null
1.5
Some time intervals between 2 and 11 are null with 6 or more non null time intervals
Time interval is patched with the average of interval – 1 and interval + 1 subject to these not being null.
For example if time interval 5 was null this would be patched with an average of time interval 4 and time interval 6
n.b this rule can happen up to a maximum of 5 times.
1.6
Three consecutive time intervals are missing
Set all time intervals for the period as null
2.1
More than 6 time intervals are null
Set all time intervals for the period as null
2.2
This will be more info table structure
CREATE TABLE DATA_MIN
DAYASNUMBER    INTEGER,
TIMEID         INTEGER,
COSIT          INTEGER,
LANEDIRECTION INTEGER,
VOLUME         INTEGER,
AVGSPEED       INTEGER,
PMLHGV         INTEGER,
CLASS1VOLUME   INTEGER,
CLASS2VOLUME   INTEGER,
CLASS3VOLUME   INTEGER,
LINK_ID        INTEGER
Sampledata
DAYASNUMBER TIMEID      COSIT     LANEDIRECTION    VOLUME    AVGSPEED PMLHGV    CLASS1vol LINK_ID
20,140,110 201,401,102,315    5    1    47    12,109    0    45    5,001
20,140,110 201,401,102,325    5    1    33    12,912    0    29    5,001
20,140,110 201,401,102,330    5    1    39    14,237    0    37    5,001
20,140,110 201,401,102,345    5    1    45    12,172    0    42    5,001
20,140,110 201,401,102,350    5    1    30    12,611    0    29    5,001
20,140,111 201,401,100,000    5    1    30    12,611    0    29    5,001
output something like FOR above sample data
DAYASNUMBER TIMEID      COSIT     LANEDIRECTION    VOLUME    AVGSPEED PMLHGV    CLASS1 LINK_ID
Rule
20,140,110 201,401,102,315    5     1    47    12,109    0    45   5,001
0
20,140,110 201,401,102,320    5    1    40    12,109    0    45    5,001
   1.4(patched row)
20,140,110 201,401,102,325    5    1    33    12,912    0    29    5,001
   0
20,140,110 201,401,102,330    5    1    39    14,237    0    37    5,001
0
20,140,110 201,401,102,335    5    1    42    14,237    0    37    5,001
1.4(patched row)
20,140,110 201,401,102,345    5    1    45    12,172    0    42    5,001
0
20,140,110 201,401,102,350    5    1    30    12,611    0    29    5,001
   0
20,140,110 201,401,102,355    5    1    30    12,611    0    29    5,001
1.2(patched row)
20,140,111 201,401,100,000    5    1    30    12,611    0    29    5,001
Any help and suggestions to extend the code to achieve would be greatly appreciate.
Note:Here the key value is Volume to be patched for missed time intervals
Thanks in advance

row_number() OVER (PARTITION BY LANEDIRECTION ORDER BY TIMEID) AS RN,DAYASNUMBER,(*to_date*(timeid,'yyyymmdd hh24miss')) as cte, COSIT,
Are you in the right place? to_date is an Oracle function, and this forum is for Microsoft SQL Server which is a different product.
Erland Sommarskog, SQL Server MVP, [email protected]

How to select the printer and select the ICC profile for printing with VBScript?

I try to automate my printing procedure in photoshop. The problem is that I don't know how to select the printer and select the icc profile for printing with vbscript like I manually do in the print-menu in photoshop?
Anyone has done this before?
Thanx!
jus

Client/Server version:
- D2KWUTIL.PLL library provides a 'Select Printer' dialog box to be used in Forms: WIN_API_DIALOG.SELECT_PRINTER
http://guenter-huerkamp.dyndns.org/oracle-doc/docs/html/d2kwutil.html
I suggest you to create a form to invoke the report, allowing user to select the printer and then pass it as parameter DESNAME

How to create an rule with action to subtract from the event log of Ips manager express console?

how to create an rule with action to subtract from the event log of Ips manager express console?, some knows of has an guide?.
Thank you.
Sent from Cisco Technical Support iPad App

Hi,
http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html

How to avoid select with in a loop.

Hi friends,
can any tell how to avoid the select with in a loop for the following code, since it badly effecting my performance. if possible with code
SELECT matnr werks
      FROM marc
      INTO TABLE it_marc
      FOR ALL ENTRIES IN it_ausp_1
      WHERE matnr = it_ausp_1-objek AND
         werks = p_werks
        AND mmsta LE 60.
    SORT it_marc BY matnr.
    CLEAR wa_ausp_1.
    CLEAR wa_tabix.
    LOOP AT it_ausp_1 INTO wa_ausp_1.
      wa_tabix = sy-tabix.
      READ TABLE it_marc INTO wa_marc WITH
        KEY matnr = wa_ausp_1-objek
        BINARY SEARCH.
      IF sy-subrc EQ 0.
      ELSE.
        DELETE it_ausp_1 INDEX wa_tabix.
      ENDIF.
    ENDLOOP.                      " LOOP AT it_ausp_1 INTO wa_ausp_1.
    APPEND LINES OF it_ausp_1 TO it_tal.
IF it_tal[] IS NOT INITIAL.
    LOOP AT t_plan_order INTO fs_plan_order.
      SELECT r~rsnum
             r~rspos
             r~matnr
             r~nomng
             r~meins
             r~plnum
             r~bdter
             r~ewahr
             r~alprf
             r~posnr
             r~baugr
             m~dispo
          INTO TABLE t_resb
          FROM resb AS r
          INNER JOIN marc AS m
          ON rbaugr = mmatnr
         AND rwerks = mwerks
         FOR ALL ENTRIES IN it_tal
         WHERE r~rsnum = fs_plan_order-rsnum
           AND r~matnr = it_tal-objek
           AND r~xloek = ' '
           AND r~werks = p_werks.
      APPEND LINES OF t_resb TO t_tacl.
    ENDLOOP.

SELECT r~rsnum r~rspos r~matnr r~nomng r~meins r~plnum r~bdter r~ewahr r~alprf r~posnr r~baugr m~dispo
          INTO TABLE t_resb
          FROM resb AS r
          INNER JOIN marc AS m
         ON r~baugr = m~matnr
         AND r~werks = m~werks
         FOR ALL ENTRIES IN it_tal
         WHERE r~rsnum = fs_plan_order-rsnum
         AND r~matnr = it_tal-objek
         AND r~xloek = ' '
         AND r~werks = p_werks.
The logic of this select is completely weird. Whcih order of the db-tables should be used, which indexes?
On RESB matnr, werks and xloek are in one index, but rsnum not.
Are the conditions in fs_plan_order and it_tal connected or independent?
It is probably much faster, to leave the fs_plan_order condition away and check it on the result.
SELECT r~rsnum r~rspos r~matnr r~nomng r~meins r~plnum r~bdter r~ewahr r~alprf r~posnr r~baugr m~dispo
          INTO TABLE t_resb
          FROM resb AS r
          INNER JOIN marc AS m
         ON   m~matnr = r~baugr
         AND m~werks = r~werks
         FOR ALL ENTRIES IN it_tal
         WHERE         AND r~matnr = it_tal-objek
         AND r~xloek = ' '
         AND r~werks = p_werks.
sort fs_plan_order by rsnum.
loop at it_tal in wa.
   read table fs_plan_order
          with key rsnum = wa-rsnum
          binary search.
   if sy-subrc eq 0.
     append ...
   endif.
endloop.
Siegfried

How to select paths with the same stroke width

I would like to know how to select all the paths inside a document whose stroke width are equal to 0.361 points
I will appreciate any help.

here you go
#target illustrator
// script.name = selectPathsThisSize.jsx;
// script.description = selects pathItems that have the same supplied stroke width; limited to 3 decimals;
// script.required = a document with at least one path item;
// script.parent = CarlosCanto // 6/5/11;
// script.elegant = false;
var idoc = app.activeDocument;
var strokewidth = prompt ("Enter Stroke Width in points of paths to be selected", 0.361, "Select Paths this size:___");
for (i=0 ; i< idoc.pathItems.length; i++)
          var ipath = idoc.pathItems[i];
               if ( (ipath.strokeWidth).toFixed(3) == Number(strokewidth).toFixed(3))
                         ipath.selected = true;
app.redraw();

How to select textFrames with tracking different to 0 (zero)?

How to select textFrames with tracking different to zero (greater or smaller than zero)?
Thanks.

Hi All,
Thanks for your help. The orignal clips are from Sony PMW F3 camera and I have got Dimensions: 1920 × 1080, Codecs: MPEG-2 Video, Linear PCM, Timecode, Color profile: HD (1-1-1), Total bit rate: 36,623.
The other camera has given me .MTS files which I have converted in MPEG-2 also. I used Wondershare Video Converter to convert second cameras clip.
I don't think the clips are matching with first camera's clips because still that is saying the same thing.
Regards,
Jai

How does select stmt with for all entries uses Indexes

Hello all,
I goes through a number of documents but still confused how does select for all entries uses indexes if fields are not in sequences. i got pretty much the same results if i take like two cases on Hr tables HRP1000 and HRP1001(with for all entries based upon hrp1000). Here is the sequence of index fields on hrp1001 (MANDT, OTYPE, OBJID, PLVAR, RSIGN, RELAT, ISTAT, PRIOX, BEGDA, ENDDA, VARYF, SEQNR). in second case objid field is in sequence as in defined Index but i dont see significant increase in field even though the number of records are around 30000. My question is does it make a differrence to use field sequence (same as in table indexes) in comparison to redundant field sequence (not same as defined in table indexes), secondly how we can ge tto know if table index is used in Select for entries query i tried Explain in ST05 but its not clear if it uses any index at all in hrp1001 read.
here is the sample code i use to get test results.
test case 1
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
      t2 TYPE timestampl,
      t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
            WHERE mandt EQ sy-mandt AND
                  plvar EQ '01' AND
                  otype EQ 'S'AND
                  istat EQ '1' AND
                  begda <= sy-datum AND
                  endda >= sy-datum AND
                  langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
            FOR ALL ENTRIES IN it_hrp1000
             WHERE mandt EQ sy-mandt AND
                    otype EQ 'S' AND
*                    objid EQ it_hrp1000-objid and
                    plvar EQ '01' AND
                    rsign EQ 'B' AND
                    relat EQ '007' AND
                    istat EQ '1' AND
                    begda LT sy-datum AND
                    endda GT sy-datum and
                    sclas EQ 'C' and
                    objid EQ it_hrp1000-objid.
*                    %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.
test case 2
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
      t2 TYPE timestampl,
      t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
            WHERE mandt EQ sy-mandt AND
                  plvar EQ '01' AND
                  otype EQ 'S'AND
                  istat EQ '1' AND
                  begda <= sy-datum AND
                  endda >= sy-datum AND
                  langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
            FOR ALL ENTRIES IN it_hrp1000
             WHERE mandt EQ sy-mandt AND
                    otype EQ 'S' AND
                    objid EQ it_hrp1000-objid and
                    plvar EQ '01' AND
                    rsign EQ 'B' AND
                    relat EQ '007' AND
                    istat EQ '1' AND
                    begda LT sy-datum AND
                    endda GT sy-datum and
                    sclas EQ 'C'." and
*                    objid EQ it_hrp1000-objid.
*                    %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.

Mani wrote:
Thank you for your answer, its very helpful but i am still nor sure how does parameter rsdb/max_blocking_factor affect records size.
Hi,
The blocking affects the size of the statement and the memory structures for returning the result.
So if your itab has 500 rows and your blocking is 5, the very same statement will be executed 100 times.
Nothing good or bad about this so far.
Assume, your average result for an inlist 5 statement is 25 records with an average size of 109 bytes.
You average result size will be 2725 byte plus overhead which will nearly perfectly fit into two 1500 byte ethernet frames.
Nothing to do in this case.
Assume your average result for an inlist 5 statement is 7 records with an average size of 67 bytes.
You average result size will be ~ 470 byte plus overhead which will only fill 1/3 of a 1500 byte ethernet frame.
In this case, setting the blocking to 12 ... 15 will give you 66% network transfer performance gain,
and reduces the number of calls to the DB by 50%, giving additional benefit.
Now this is an extreme example. The longer the average row length is, the lower will be the average loss in the network.
You have the same effects in memory structures, but on that layer you are fighting single micro seconds instead of
hundreds of these, so in real life it is rarely measurable.
Depending on table-statistics, oracle might decide for short inlists to use a concatanation instead of an inlist.
This is supposed to be more costy, but I never had a case where I could proove a big difference.
Values from 5 to 15 for blocking seem to be ok for me. If you have special statements in customer coding,
it #might# be benefitial to do the mentioned calculations and do some network tracing to see if you can squeeze your
network efficiency by tuning the blocking.
If you have jumbo frames enabled, it might be worth to be analyzed as well.
If you are only on a DB-CI system that is loopback connected to the DB, I doubt there might be a big outcome.
Hope this helps
Volker

How to deal with the rule that do not use "object" class to declear a class

I run my flex project in sonar. And there is a rule "Do not use Object class ".
I just want to know how to deal with this problem.
I mean, when I try to write a base class, I don't know which kind of class will be transfered in by reference, which type I can declear instead of "object"?

Check out this example:
The moment I put in the code >> box1.addItem("hello"); << and run the application, the BusNameListener is fired. Hope this makes sense.
import java.awt.*;
import javax.swing.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
public class JFrameExample {
private JComboBox box1;
public JFrameExample() {
box1 = new JComboBox();
box1 .setMinimumSize(new Dimension(300, 24));
box1 .setPreferredSize(new Dimension(300, 24));
box1.addActionListener(new BusNameListener());
box1.addItem("hello");
JFrame f = new JFrame("This is a test");
f.setSize(400, 150);
Container content = f.getContentPane();
// content.setBackground(Color.white);
content.setLayout(new FlowLayout());
content.add(box1);
f.setVisible(true);
class BusNameListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
JComboBox cb = (JComboBox) e.getSource();
String item = (String) cb.getSelectedItem();
if (item != null) {
JOptionPane.showInputDialog(null,
"Specify...", "File Import",
JOptionPane.OK_CANCEL_OPTION);
}

How to select with ruler mm

Similar Messages

Maybe you are looking for