How to send 1 email to all addresses in Mails memory......
without using the address book.
Ya' know how "Mail" keeps all of your sent-to addresses, noticable when you start to type in an address and it finishes it.......
I need to send one "change of contacts" email to everyone who has sent and received an email from me. Any easy way to go about it?
Thanks Much!
Chris
Following on with Austin's reply, if you don't want to permanently add all those folks in Mail's Previous Recipients list to your Address Book, open up your home folder's Library folder's Application Support folder and copy your AddressBook folder to your Desktop. Then in Mail's Previous recipients window, when you select all entries and add them to your address book, and then in Mail, new message, address book, select all and drag everybody from the list into your To: (or maybe better, BCC:) field, and send your email.
Then throw away the newly modified AddressBook folder (in your home folder's Library folder's Application Support folder) and drag the wanted AddressBook folder now on your Desktop back into it's rightful place (into your home folder's Library folder's Application Support folder).
Similar Messages
-
Sending email to multiple address using Utl_Smtp
Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause: A SMTP permanent error occurred.
*Action: Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected] U1
[email protected] U2
[email protected] U3
[email protected];[email protected];[email protected] U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected] U1
[email protected] U2
[email protected] U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank youSimple Mail Transfer Protocol RFC 5321 specifications.
RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
The first or only argument to this command includes a forward-path
(normally a mailbox and domain, always surrounded by ">" and "<"
brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb. -
Why I can't send emails to some address and also i...
Hello!
Why I can't send email using my ovi mail account to some email address and also i can't send email using Thunderbird? So what is the problem?
I can't send email to any address using Mozilla Thunderbird. Every time show "Login to server mail.ovi.com failed." but Thunderbird download my ovi account email without any problem. how do i fix this error. I don't know where to post this matter!Yahoo has messed with their stuff lately (honestly they've been messing with their servers for months)
One thing would be if you guys wanted to use the yahoo mail app, or there have been other users posting solutions that they say work for them
https://discussions.apple.com/message/27906475?ac_cid=tw123456#27906475
https://discussions.apple.com/message/27894621?ac_cid=tw123456#27894621
These have applied to people not able to get mail but changing the settings may help you and your wife. (My yahoo is still working so I haven't needed to try any of these)
I've noticed with my Yahoo that they've changed their login protocols. For example 'stay signed in' is always clicked and the push is for people to merge multiple accounts to access their multiple yahoo from one account/sign in instead of signing out/in to access different accounts. I'm wondering if that change is what's messing with the protocols needed for iOS mail to work. But no one really knows for sure (and neither Apple or Yahoo will comment on the issue)
About all users can do is find work arounds that work for them.
If these don't work or if you don't want to use the yahoo mail app, you might try using safari to go to yahoo.com and access your mail that way. -
[SOLVED]How to send email to a local user?
I have installed Mutt, msmtp, procmail and I can send and receive emails to/from remote hosts and I'd like to send email locally also (to the recipients on the same machine as the sender).
When I try to send email to a local user from the root account -
echo "Test message" | mail -s "Test subject" localuser
then I get an error that connection to the port 25 is refused. Because the /etc/msmtprc file contains the 'localhost' as the default account's host, and on the local host I don't have a mail server listening on 25 port running.
When I try to send email from a non-root account which has in /$HOME/.msmtprc file a real email account on a remote server, then of course there is an error that the domain for the email address 'localuser' is not recognized.
How can sending email to local users be enabled?
Last edited by nbd (2014-09-30 22:33:37)If I understand correctly, postfix it's a constantly running daemon. Seems to be an overhead for delivering only from time to time sent messages.
ewaller wrote:
> Out of the box, sendmail should be safe, but I think you have to enable local mail.
Currently I have msmtp-mta installed, which is described as having sendmail functionality. If I install sendmail - will it be possible to send local email without running email daemons? -
Sending email from different addresses under one account.
Hello,
So, I'm having an issue that's a little bit complicated, and in fact, I don't even know if there is a solution. But, if anyone knows how to do this, I'd greatly appreciatte your help.
So, here's what I'm trying to do.
Right now, I have three different email accounts, an icloud and two gmails. I have both of those gmails set up so that they forward to my icloud account. So, in the mail app on my iphone, I only have my icloud account. I've been trying to reduce clutter by doing this, and it seems to be working pretty well, save for this issue.
The problem I am having is still being able to respond to emails sent to one of those two gmail accounts with the same email address. I.e.-if someone emails me at my gmail account, it's then forwarded to icloud, but I still want to respond from that gmail account using the mail app on my iphone. I'd like to do this without setting adding the two "dead" gmail accounts onto my phone, because everything is more streamlined when I'm only using icloud.
I've been able to do this using iMail on my mac by adding the two gmail addresses to my icloud account in settings, as well as the gmail server. So on my mac, I only have icloud set up in imail, but I can compose emails using my two gmail addresses. I pretty much want to be able to do the same thing on my iphone.
Does anyone know how this can, or even if, it can be set up?
Also, if it can't be done in the native mail app to ios, do you know of any third party apps where something like this would be possible?
Thanks!!1Hi 3s1k,
Thank you for your question.
When he replies to my email and changes the "send From"
to [email protected] and send the email, It will still show that it was sent from @mainDomain.com.
Now, I think the issue is within his Exchange mailbox, his default reply email address is @MainDomain.com.
A:You are right. By our testing. We could just send emails with primary address, but we could receive emails with primary address and second address.
How do I get around this. The client wants to utilize sending email from both domains since he has clients in both domains.
A: If we want to send email with specific email address, we could manually modify the primary email address to the specific domain by Exchange administrator. And the client didn’t use customized email address to send emails.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim -
Problem sending email to gmail address
My husband and I both have Blackberry Curve 8330.
Our daughter has a Samsung Exclaim.
We're all on the same account with Sprint.
When I try to send an email to my daughter's gmail address, the message does not go through. I get a red X next to the message on my display. (I use hotmail)
My husband can send emails to her address from his phone with no problem.
I can send emails to any other email address, including other gmail addresses.
Can anyone help me fix this problem?Hi and Welcome to the Forums!!
I suggest the following steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to send emails from of pdf's generated by oracle reports
I have several pdf documents , I want to email those pdf's . Please let me know how to send emails from oracle reports .
Thanks,
PrevinI have integrated Oracle Reports with Oracle Portal and used the scheduling feature via portlets. We have reports that run every monday morning for management. For more info go to:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
OR
I think if you set destype=mail, desformat=PDF, and desname=[email protected] that should also do the trick.
Just be sure that you have put your mail server's IP address in the rep_<machine_name>.conf file located in your <oracle_home>/reports/conf directory. If this is not set up, the mail feature won't work.
Martin -
How to send emails to spam folder?
I just got my Note4 and the phone's Help tells me that I need to select the email, then the bottom menu will populate with a little red circle with a + in it. I am to click that and the email address is sent to spam. But my bottom menu is NOT giving me that spam icon to click. How can I block emails? Or how can I get that little icon to show up?
Thanks!!Yes, I have unsubscribed to the emails that allowed me too. Now I would
like to block spefic addresses and/or domains.
My email addresses are @verizon.net, @gmail.com and a corporate one. I am
using Gmail for the Gmail accounts and using the default email service that
came on the phone. It's icon is an envelope with a red @
I know the gmail service allows me to easily click "report spam" but using
note 4 how can I block emails in my verizon.net account and corporate
account?
Thanks.
<https://community.verizonwireless.com>
A message from the Verizon Wireless Community
<https://community.verizonwireless.com>
<https://www.verizonwireless.com/wcms/consumer/explore.html>
<http://www.verizonwireless.com/wcms/consumer/shop.html> [image: MY
VERIZON] <http://www.verizonwireless.com/b2c/myverizonlp/>
<http://www.verizonwireless.com/support/>
how to send emails to spam folder? created by Verizon Wireless Customer
Support <https://community.verizonwireless.com/people/vzw_customer_support>
in Android - View the full discussion
<https://community.verizonwireless.com/message/1176922#1176922> -
How to sending email from Oracle Forms
How to sending email from Oracle 6i(Forms)
I need to send email to a distribution list(multiple email addresses).send email of multiple email address
[email protected],[email protected],[email protected]
create or replace function mailout
(sender in varchar2,
recipient in varchar2,
ccrecipient in varchar2,
subject in varchar2,
message in varchar2) return number
is
crlf varchar2(2) := chr(13)||chr(10);
connection utl_smtp.connection;
mailhost varchar2(50) := 'Add email server Ip Address here';
header varchar2(4000);
v_num number :=1;
str number:=0;
email varchar2(50);
begin
connection := utl_smtp.open_connection(mailhost,25);
header := 'Date: '||to_char(sysdate,'dd mon yy hh24:mi:ss')||crlf||
'From: '||sender||' '||crlf||
'Subject: '||subject||crlf||
'To: '||recipient||crlf||
'Cc: '||ccrecipient||crlf||message;
utl_smtp.helo(connection,mailhost);
utl_smtp.mail(connection,sender);
utl_smtp.rcpt(connection,recipient);
while (instr(ccrecipient,',',1,v_num)>0) loop
email:=substr(ccrecipient,str+1,instr(ccrecipient,',',1,v_num)-str-1);
dbms_output.put_line(email);
utl_smtp.rcpt(connection,email);
str:=instr(ccrecipient,',',1,v_num);
v_num:=v_num+1;
end loop;
utl_smtp.open_data(connection);
-- utl_smtp.write_data(connection,header);
utl_smtp.write_data(connection,'MIME-Version:1.0'||crlf||'Content-type:text/html'||crlf||header);
utl_smtp.close_data(connection);
utl_smtp.quit(connection);
return 0;
exception
when utl_smtp.invalid_operation then
dbms_output.put_line('Invalid Operation in SMTP transaction');
return 1;
when utl_smtp.transient_error then
dbms_output.put_line('Temporary problem with sending email ');
return 2;
when utl_smtp.permanent_error then
dbms_output.put_line('Permanent problem with sending email ');
return 3;
end; -
Reply address: is it possible to use another reply address other than the pop address used in my account. I have a special work account and would like to send emails with that address as my reply address...or sent from address
i found out how to do this finally!
1) set up google gmail account to forward your emails to (from the [email protected])
2) go to your gmail account
3) go to settings (cog in right hand corner)
4) go to 'accounts and import'
5) go to 'send mail as'
6) click 'Add another email address you own' - add your [email protected] address
7) google will send a verification email with code to that email address.
8) enter code
9) go back to gmail account >'send mail as' and select 'make default'
10) close mac 'mail' program and reopen it.
as long as you have gmail account selected as the primary account in MAIL - mail will now come throught as being sent from that [email protected] address!! -
Hi All,
I am working with SharePoint 2013 designer workflow. we are using office 365.
Our requirement to send email to multiple users, get the user groups from lookup list people and groups column.
But SP designer sending emails to the first user alone.
Please guide me to proceed.
Advance Thanks.
Regards
Jenkins NS
Thanks and Regards Jenkinsfinally I got a solution
Identified a workaround to solve the issue using SharePoint designer.
Step 1
Create a lookup list Example department
Columns
Title (by default) – Single line of text
Users – Person or Group
Emails – Multiple lines of text
hidden the Emails column (go to content type and set the column as hidden)
Create a SharePoint designer Workflow
Start Workflow automatically when an item is created
Also Start Workflow automatically when an item is changed
Workflow Stage 1
Set Emails to current Item: Users
The workflow will get all users email ids and add in the Emails column delimiter as semicolon.
Step 2
Create a custom list to get the email ids and send email
Create a lookup column ex: analysis and refer department list, Allow multiple values
Then Create a SharePoint designer workflow
full details workflow steps please follow below
URL
http://jenkinsblogs.com/2015/04/30/how-to-send-emails-to-multiple-users-from-lookup-list-people-picker-field-using-sharepoint-designer-workflow/
Thanks and Regards Jenkins -
Send email as another address?
I have a gmail address that sends email as another address. Is there a way I can send from another address other than my gmail login in the Touch?
cfm007,
Welcome to our family. We want you to be able to enjoy all the services we provide and we definitely need to address this. Do you receive/make calls without problems? Are you able to receive messages with your contacts' number? Are you using iMessages? If so, go to Settings>Messages>Send&Receive>only your phone number should be enabled.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help
Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy -
How to send email notification in different languages in Workflow ?? Urgent Help Needed
Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM -
I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?
As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums
Maybe you are looking for
-
Connect iPod to Sony television
How can I connect my iPod touch to my television
-
My ipad looks like it is locked up while doing the ios 6 upgrade
i began the update about 20 minutes ago and the ipad screen has not changed at all?
-
QuickTime 10 wont open/respond
My QT will not respond, I don't have the sligest clue as to what happend. I am curently using the latest software update Mac OS X Lion 10.7.4 . Have anyone out there have this type of issue? If so could you be kind to tell ma how you fix it? Thanks
-
How to print a pl/sql raw or BLOB to html page with htp.p command
Hi! I have a jpeg image I retrieved from the OID and it is stored in an DBMS_LDAP.BINVAL_COLLECTION, which is supposed to be similar to a BLOB or PL/SQL raw collection. What I want to do is to print it to my portal page. I have been using htp.p to pr
-
How to sum a complexly calculated variable or something capable of doing it
Hi I'm working on a report (RTF) that need to sum a complex calculated value within a group. The value is from a set of code like below: ---Code Start--- var temp1 If xmlfield1 = '' temp1 = xmlfiled2 * xmlfield3 / 100 Else temp1 = xmlfield4 End var t