How to send a 100 plus page MS Word Report with Word and pdf. attachments?

Sir or Madam,
I am not able to e-mail or have a 100 plus page report received and need your support. It contains a combination of MS Word and pdf files and attachments.
I am using MS Outlook 2007 and Google Chrome.
Please advise.
Thank you in advance.
Earleb
Earle Rheaume
If your mail service allows all of that to be sent as attachments or however you are attempting that then it's possible the email server or servers receiving the email do not allow attachments that large.
You say you are sending "a combination of MS Word and pdf files and attachments". I've never sent anything like that. I have zipped various files into a zip file then attached that to an email for sending.
Googles mail appears to allow a total of 25 megabytes of attachments in a single email.
Yahoo mail appears to allow a total of 25 megabytes also.
Microsofts mail appears to allow a total of 20 megabytes of attachments in a single email.
Another option would be to upload everything to your onedrives public folder and provide a link for others to download all of it in the email you send out.
A single users onedrive supposedly can have up to 10 gigabytes loaded onto it. I suppose all of that could be used by the public folder but maybe not.
La vida loca

Similar Messages

Search rollover page number not consistent with thumb and pdf page number

Please respond by e-mail to
[email protected]
Adobe Reader 9.0 and 8.1.2.
Mac OS X 10.4.11
Mac PowerPC G4
640 MB SDRAM
Does Adobe Reader have a search window phrase rollover, yellow-highlighted pop up page number bug displaying the wrong page in some circumstances?
If Yes, how do I report that bug to get Adobe to fix it?
Viewing the same PDF:
MacPreview does not have the problem described below,
Adobe Reader does have the problem.
Adobe Reader, search phrase rollover, pops up a page number that is yellow-highlighted, e.g., p# 29, and is wrong, whereas the page number for the thumb and PDF are both the same and are correct.
My PDF has been set on Acrobat Pro to properly paginate the first eight pages in lowercase Roman numerals (i, ii, iii, iv, v, vi, vii, viii) followed by Arabic numerals (1, 2, etc.). My PDF uses an AcrobatPro special setting to properly handle this pagination scheme. The search phrase rollover pops up a yellow-highlighted page number that wrongly adds 8 pages to the page number for the thumb and for the PDF page. Suspiciously, we have 8 pages with lowercase Roman numbers. Remember, viewing the same PDF, MacPreview works perfectly, producing identical and correct page numbers for the phrase, thumb, and PDF.

the method u followed is fine as need a page number staring from a specify value which u input.
@section is only for resetting page number to 1 for every group and for that pdf and ppt will be fine but only for rtf u need to use that ( pressing F9).
u can use @section and initial page number combined but they give u same output as get now. rtf output wont support it will only reset 1 every time
What ever u do rtf output wont support initial page number code ..........
i mentioned that F9 work around to mention that it is the only work around u have upto now to control rtf output with regards to page number.
Guru's correct me if i am wrong. wait for a day or two if some one from guru's confirm it .
If u need real confirmation raise an SR oracle will let u know .

How to send the idoc to 12 status, without processing with RSEOUT00 and RBD

Hi All,
How can I change the status of IDoc to 12 without processing with the programs RSEOUT00 and RBDMOIND programs, only with using the partner profiles. Help needed ASAP.
Thanks,
sreenivas.

Then you need to use fm
call function 'MASTER_IDOC_DISTRIBUTE'
    exporting
      master_idoc_control            = wa_edidc
    tables
      communication_idoc_control     = i_edidc
      master_idoc_data               = i_edidd
    exceptions
      error_in_idoc_control          = 1
      error_writing_idoc_status      = 2
      error_in_idoc_data             = 3
      sending_logical_system_unknown = 4
      others                         = 5.
then you want to change status
try to submit the above said program
a®

I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics

I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.

The Acrobat SDK might be a starting point.
From there, perhaps a plug-in (built with C+).
Perhaps with a licensed release of a PDF Library (this could be $$).
The viable and cost effective alternative is use the tried and true.
Authoring in an appropriate authoring application with appropriate tag management.
Example: Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
This way you place "Alternative Text" when mastering content in the authoring file.
Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
Regardless, here you have a sub-forum for discussions on Acrobat usage.
Consequently discussions on/of 3rd party software is rather out of scope eh.
Be well...

How do I print a configuration page from a Mac with Snowleopard?

How do I print a configuration page from a Mac with Snowleopard? Printer is workinhg fine, but I just put in a new cartridge and I'd like to know how many pages I'm printing.
Dave

Hi there Dave, aka @dewanio , welcome back
I saw that you are looking to print off a configuration page.
The printer itself will print a test page however, the model depends on how it will print. Let me know which printer you have and I will get back to you!
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How can I print a Safari page without the links being printed and cover other text?

How can I print a Safari page without the links being printed and covering other text?

Try printing the page as PDF.
From your Safari menu bar click File > Print > Save As PDF then print the PDF file.
If you don't want to do it that way, reset the print system.
Mac OS X: How to reset the printing system

How to send a mail in workflow keeping 1 receiver in CC and the other in TO

Hi,
Can anybody tell me how to send a mail in workflow keeping 1 receiver in CC and the other in TO.
I need to send a mail to an employee keeping his/her manager in CC through workflow.
Regards,
Lavanya

Hi Lavanya,
I dont think its possible using Send mail step type.
But it can be done by using the FM SO_NEW_DOCUMENT_SEND_API1. Just create a method and Call this FM accordingly.
Thanks,
Viji.

How do i create 2 parameter pages for 1 report?

Hi,
I want to make a purchase order report. first: i need a parameter page to ask how many items that you want to order. second, once user enters a number(let's say 5), i want to have anoter parameter page show 5 empty fields that user can enter 5 items' barcode#, once they entered barcodes, the report will show these 5 items info.
my difficulty is how do i create 2 parameter page for 1 report?
thank you

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?
Email has 3 attachments--some are not pdf. I'd like all three converted into pdf files along with the email itself, and all appear in the email's pdf portfolio.

I would also like an answer to this question.
I am trying to convert an Outlook email to a PDF, then all attachment are appended to the PDF as pages instead of attachments.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How do I keep my macbook pro from automatically rearranging my folders and PDF files on my desktop

How do I keep my macbook pro from automatically rearranging my folders and PDF files on my desktop? It seems to happen a lot after I've hooked my laptop to my Thunderbolt in my office and then I unhook my laptop to go present at a clients of taking my laptop home to work. Every once in a while if even places all of my folders and PDF files in the far upper left corner of my screen. Needless to say, having to constanly rearrange my desktop is extremly annoying and would love to know what the fix is for this problem. Thank you in advance for any help offered!

Thanks for the tip "baltwo", unfortunately my desktop settings were already set to NONE. I've had one of my IT guys here this moring helping me look through all of this and we're at a wall trying to figure out why it's doing this. This morning when I docked to the Thunderbolt all my folders and PDF files are in the upper lefthand corner stacked on top of each other almost out of view. If I go to settings, displays, and swith to mirroring, all the folders and files go right back to where they're set up on my MacBook desktop, but I lose the ability to utilize the entire screen of the Thunderbolt. Very frustrating to say the least and after searching through and reviewing several forums, Apple is very much aware of this issue and seems to be keeping silent on the issue. Hoepfully they'll launch a fix soon!
THANKS again for the tip, it's much appreciated!

How to send a document from pages in email

Can u send a document from pages in email that can be opened by a PC.

Ourdream wrote:
even if I dont have word it can be sent as word?
Yes, try Share > Send Via Mail

How to send the complete apex page in email.

Hi All,
I have created an apex page which contains 5 sql report region and one IR region. All these regions are dynamic. Now I have created on button to just send an email to the addresses mentioned in the process. Now I want to send this page daily as report by email. i want to display the page in the email body.
Please help me for this issue.
Thanks.
Subhash

Subhash,
Here is one approach..
1. Make the report page as PUBLIC ( no Authentication required)
2. Create procedure which will pull the page content and send it to pre-defined e-mail address
2.1 Use utl_http.request to pull the page content
2.2 Store the page content in some PL/SQL variable and pass it as 'p_body_html' parameter to APEX_MAIL.SEND procedure.
3. Schedule the above procedure to run on daily using DBMS_JOB API.
I have not implemented it and its just a thought.
Regards,
Hari

How to send information from HTML page to JSP without reloading HTML page?

Hello,
Is it possible to send information(row number selected by user) from HTML page to JSP without reloading HTML page?
Thanks.
Oleg.

Yes, you can do this with framesets and a hidden frame.
You need a bit of JavaScritp in the "visible" frame that
sets the location of the hidden frame to the JSP.
Add the user's choice as a parameter to the JSP URL.

Sending email for some pages of a report

Hi!
I would like to know, is it possible to send via email some pages of a SAPScript.
I've created a report, with SAPScript output. The report is collecting a lot of data, and is grouping the data by customer.
So at the end of the report run, I have 5 pages, with a grouping like this:
1. Customer A / Deliveries 1,2,3
2. Customer B / Deliveries 4,5
3. Customer C / Deliveries 6,7,8,9
4. Customer D / Deliveries 10
5. Customer E / Deliveries 11,12
In the B, D customer master data exist an email address, so I have to send the 2nd page to the email address of B (for example [email protected]) and the 4th page to the email address of D (f.e.: [email protected]).
How can I solve this?
Thanx
Tamá

Hi!
The following coding provides the SAPScript list, now. This is what I would like to extend with the email sending.
The table it_fuvar contains the data of the customers and deliveries. I think I have to enter the email sending between the END_FORM and START_FORM function modules.
My problems are:
- is the OTF ready and convertable to PDF at this moment (after an END_FORM)?
- if it is, then how identify it to convert and how to send the converted PDF via attachment?
DESCRIBE TABLE it_fuvar LINES fcount.
IF fcount = 0.
    WRITE:/ 'Nincsen nyomtatható adat.'.
    EXIT.
ENDIF.
SET LANGUAGE sy-langu.
CLEAR wa_itcpo.
MOVE 'X' TO wa_itcpo-tdimmed.
MOVE 'X' TO wa_itcpo-tdnewid.
MOVE sy-repid TO wa_itcpo-tdsuffix2.
MOVE sy-title TO wa_itcpo-tdtitle.
* open form
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      OPTIONS       = wa_itcpo
      dialog        = 'X'
      form          = gc_formname
      language      = sy-langu
    EXCEPTIONS
      canceled      = 1
      device        = 2
      form          = 3
      OPTIONS       = 4
      unclosed      = 5
      mail_options = 6
      archive_error = 7
      OTHERS        = 8.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
MOVE 1 TO fcount.
SORT it_fuvar.
LOOP AT it_fuvar INTO wa_fuvar.
    AT NEW vstel_bez.
* speditőr címadatok kiírása a scriptbe
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          window = 'M_SPEDIT'
        EXCEPTIONS
          OTHERS = 1.
* cím, téma, számlázási cím kiírása a scriptbe
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          window = 'M_INFO'
        EXCEPTIONS
          OTHERS = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'M_SZALLITASI_CIM'
        EXCEPTIONS
          OTHERS = 1.
    ENDAT.
    AT NEW tknum.
      SUM.
* kocsik (transzportok) kiírása a scriptbe
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'M_KOCSI'
        EXCEPTIONS
          OTHERS = 1.
      fcount = fcount + 1.
    ENDAT.
*   print item line
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'M_ARUFOGADO'.
    AT END OF vstel_bez.
* footer
      MOVE 1 TO fcount.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          window = 'M_BOTTOM'
          element = 'NEW_PAGE'.
      CALL FUNCTION 'END_FORM'
        EXCEPTIONS
          unopened                 = 1
          bad_pageformat_for_print = 2
          spool_error              = 3
          codepage                 = 4
          OTHERS                   = 5.
      IF sy-subrc <> 0.
      ENDIF.
* EMAIL SEND???
* EMAIL SEND???
* EMAIL SEND???
      CALL FUNCTION 'START_FORM'
        EXPORTING
          form        = gc_formname
          language    = sy-langu
        EXCEPTIONS
          form        = 1
          format      = 2
          unended     = 3
          unopened    = 4
          unused      = 5
          spool_error = 6
          codepage    = 7
          OTHERS      = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDAT.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
    EXCEPTIONS
      OTHERS = 1.
Thanx
Tamá

How to send a 100 plus page MS Word Report with Word and pdf. attachments?

Similar Messages

Maybe you are looking for