How to send a mail as .txt attachment ,As data is seperated by pipeline

Hi ,
I got a requirement to send a mail in .txt format (Using OOPS) and the data inside the mail is seperated by '|'  Pls help me in this regard.
i have written a mail to send the mail in .xls it is working fine for me in .xls but i dont know how to write the same for txt where data should be seperated by '|'.
Regards
sas
Ps:  i am attaching my code. and please specify where i need to modify to achieve the same. and any perfromance enhacements are also welcome.
*& Report  ZGBTEST02
REPORT  YSAS_MAIL2.
*Changes done by sas
*PARAMETERS: P_MAIL TYPE AD_SMTPADR OBLIGATORY, " G C by sas
*P_MAIL1 TYPE AD_SMTPADR OBLIGATORY." G by sas
tables: adr6.
SELECT-OPTIONS:p_eaddr FOR adr6-SMTP_ADDR NO INTERVALS .
*end of changes by sas
DATA: I_GLT0 TYPE STANDARD TABLE OF GLT0.
DATA: I_MARA  TYPE STANDARD TABLE OF MARA.  " MARA Entries
*      I_MARC  TYPE STANDARD TABLE OF MARC.  " MARC Entries
DATA: L_TEXT  TYPE CHAR255.  " Text
DATA: L_LINES TYPE I,
      L_SIZE  TYPE SOOD-OBJLEN.
" Size of Attachment
* Mail related
DATA: I_CONTENT         TYPE   SOLI_TAB, " Mail content
      I_ATTACH          TYPE   SOLI_TAB, " Attachment
      I_ATTACH1         TYPE   SOLIX_TAB. " Attachment
DATA: L_SEND_REQUEST    TYPE REF TO    CL_BCS,
                                            " E-Mail Send Request
      L_DOCUMENT        TYPE REF TO    CL_DOCUMENT_BCS,
                                            " E-Mail Attachment
      L_RECIPIENT       TYPE REF TO    IF_RECIPIENT_BCS,
                                            " Distribution List
      L_SENDER          TYPE REF TO    IF_SENDER_BCS,
                                            " Address of Sender
      L_UNAME           TYPE           SALRTDRCPT,
                                            " Sender Name(SY-UNAME)
      L_BCS_EXCEPTION   TYPE REF TO    CX_DOCUMENT_BCS,
                                            " BCS Exception
      L_ADDR_EXCEPTION  TYPE REF TO    CX_ADDRESS_BCS,
                                            " Address Exception
      L_SEND_EXCEPTION  TYPE REF TO    CX_SEND_REQ_BCS.
" E-Mail sending Exception
*Constants------------------------------------------------------------*
CONSTANTS: C_TAB(1) TYPE C VALUE
           CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
                                     " Tab Character
           C_CR(1)  TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF,
                                     " Line Feed for End-Of_line
           C_EXT    TYPE SOODK-OBJTP VALUE 'XLS'. " XLS Extension
START-OF-SELECTION.
  SELECT * FROM MARA INTO TABLE I_MARA UP TO 20 ROWS.
  IF SYST-SUBRC EQ 0.
*    SELECT * FROM MARC INTO TABLE I_MARC FOR ALL ENTRIES IN I_MARA WHERE MATNR = I_MARA-MATNR.
  ENDIF.
*select * from glt0 into table i_glt0.
* Preparing body of the Mail
  MOVE 'SAP Material Master Records' TO L_TEXT.
  APPEND L_TEXT TO I_CONTENT.
  CLEAR L_TEXT.
  APPEND L_TEXT TO I_CONTENT.
  MOVE 'Thanks,' TO L_TEXT.
  APPEND L_TEXT TO I_CONTENT.
  MOVE 'SAP MM' TO L_TEXT.
  APPEND L_TEXT TO I_CONTENT.
* Creates persistent send request
  TRY.
      L_SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
* Creating Document
      L_DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
                                    I_TYPE  = 'RAW'
                                    I_TEXT  = I_CONTENT[]
                                    I_SUBJECT = 'SAS MASTER Records' ).
* Preparing contents of attachment with Change Log
      PERFORM PREPARE_ATTACHMENT.
      DESCRIBE TABLE I_MARA LINES L_LINES.
* Size to multiplied by 2 for UNICODE enabled systems
      L_SIZE = L_LINES * 2 * 255.
* Adding Attachment
      CALL METHOD L_DOCUMENT->ADD_ATTACHMENT
        EXPORTING
          I_ATTACHMENT_TYPE    = C_EXT
          I_ATTACHMENT_SIZE    = L_SIZE
          I_ATTACHMENT_SUBJECT = 'MARA Details'
*          i_att_content_hex    = i_attach[].
          I_ATT_CONTENT_TEXT   = I_ATTACH[].
*      DESCRIBE TABLE I_MARC LINES L_LINES.
* Size to multiplied by 2 for UNICODE enabled systems
*      L_SIZE = L_LINES * 2 * 255.
** Adding Attachment
*      CALL METHOD L_DOCUMENT->ADD_ATTACHMENT
*        EXPORTING
*          I_ATTACHMENT_TYPE    = C_EXT
*          I_ATTACHMENT_SIZE    = L_SIZE
*          I_ATTACHMENT_SUBJECT = 'MARC Details'
*          I_ATT_CONTENT_HEX    = I_ATTACH1[].
**          i_att_content_text   = i_attach1[].
* Add document to send request
      CALL METHOD L_SEND_REQUEST->SET_DOCUMENT( L_DOCUMENT ).
      DATA:LR_SENDER TYPE REF TO IF_SENDER_BCS,
           LR_SEND TYPE REF TO CL_BCS.
* Preparing the sender object
*      LR_SENDER = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( sy-uname ).
       DATA: L1_UNAME TYPE SY-UNAME.
       L1_UNAME = SY-UNAME.
       LR_SENDER = CL_SAPUSER_BCS=>CREATE( L1_UNAME ).
* Setting the sender
      CALL METHOD L_SEND_REQUEST->SET_SENDER
        EXPORTING
          I_SENDER = LR_SENDER.
* E-Mail
   LOOP AT P_EADDR.
      TRANSLATE P_EADDR-LOW TO LOWER CASE.
      L_RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( P_EADDR-LOW ).
      CALL METHOD L_SEND_REQUEST->ADD_RECIPIENT
        EXPORTING
          I_RECIPIENT  = L_RECIPIENT
          I_EXPRESS    = 'U'
          I_COPY       = ' '
          I_BLIND_COPY = ' '
          I_NO_FORWARD = ' '.
       IF SY-subrc EQ 0.
          WRITE:/'** SUCCESS:  Email Sent to', p_eaddr-LOW COLOR COL_NORMAL.
        ELSE.
          WRITE:/'** ERROR: Failed to send Email to',p_eaddr-LOW COLOR COL_NEGATIVE .
        ENDIF.
      ENDLOOP.
*Trigger E-Mail immediately
      L_SEND_REQUEST->SET_SEND_IMMEDIATELY( ' ' ).
      CALL METHOD L_SEND_REQUEST->SEND( ).
      COMMIT WORK.
    CATCH CX_DOCUMENT_BCS INTO L_BCS_EXCEPTION.
    CATCH CX_SEND_REQ_BCS INTO L_SEND_EXCEPTION.
    CATCH CX_ADDRESS_BCS  INTO L_ADDR_EXCEPTION.
  ENDTRY.
*&      Form  PREPARE_ATTACHMENT
FORM PREPARE_ATTACHMENT .
  FIELD-SYMBOLS: <LFS_TABLE>,    " Internal table structure
                 <LFS_CON>.      " Field Content
  DATA: L_TEXT TYPE CHAR1024.     " Text content for mail attachment
  DATA: L_CON TYPE STRING. "(50) TYPE c.        " Field Content in character format
  DATA: L_STR TYPE STRING,
        L_STR1 TYPE STRING.
  DATA: LS_SOLIX TYPE SOLIX.
* Columns to be tab delimeted
  LOOP AT I_MARA ASSIGNING <LFS_TABLE>.
    DO.
      ASSIGN COMPONENT SY-INDEX OF STRUCTURE <LFS_TABLE>
             TO <LFS_CON>.
      IF SY-SUBRC NE 0.
        CONCATENATE C_CR L_TEXT INTO L_TEXT.
*        CONCATENATE l_str c_cr l_text INTO l_str.
*        ls_solix-line = l_text.
*        APPEND ls_solix TO i_attach.
        APPEND L_TEXT TO I_ATTACH.
        EXIT.
      ELSE.
        CLEAR: L_CON.
        MOVE <LFS_CON> TO L_CON.
        CONDENSE L_CON.
        IF SY-INDEX = 1.
          CLEAR: L_TEXT.
          MOVE L_CON TO L_TEXT.
        ELSE.
          CONCATENATE L_TEXT L_CON INTO L_TEXT
             SEPARATED BY C_TAB.
        ENDIF.
      ENDIF.
    ENDDO.
  ENDLOOP.
** Columns to be tab delimeted
*  LOOP AT I_MARC ASSIGNING <LFS_TABLE>.
*    DO.
*      ASSIGN COMPONENT SY-INDEX OF STRUCTURE <LFS_TABLE>
*             TO <LFS_CON>.
*      IF SY-SUBRC NE 0.
*        CONCATENATE C_CR L_TEXT INTO L_TEXT.
**        CONCATENATE l_str c_cr l_text INTO l_str1.
*        LS_SOLIX-LINE = L_TEXT.
*        APPEND LS_SOLIX TO I_ATTACH1.
*        EXIT.
*      ELSE.
*        CLEAR: L_CON.
*        MOVE <LFS_CON> TO L_CON.
*        CONDENSE L_CON.
*        IF SY-INDEX = 1.
*          CLEAR: L_TEXT.
*          MOVE L_CON TO L_TEXT.
*        ELSE.
*          CONCATENATE L_TEXT L_CON INTO L_TEXT
*             SEPARATED BY C_TAB.
*        ENDIF.
*      ENDIF.
*    ENDDO.
*  ENDLOOP.
*  i_attach1[] = i_attach[].
ENDFORM.                    " PREPARE_ATTACHMENT

Hi Sas,
I have copied the code and executed and it is working fine. I'm getting the text attachement in the email.
* Adding Attachment
      CALL METHOD L_DOCUMENT->ADD_ATTACHMENT
        EXPORTING
          I_ATTACHMENT_TYPE    = 'TXT'          "  C_EXT   My change
          I_ATTACHMENT_SIZE    = L_SIZE
          I_ATTACHMENT_SUBJECT = 'MARA Details'
*          i_att_content_hex    = i_attach[].
          I_ATT_CONTENT_TEXT   = I_ATTACH[].
CONCATENATE i_mara-MATNR
                         i_mara-ERSDA
                         i_mara-ERNAM
                         i_mara-LAEDA
               INTO   L_TEXT
             SEPARATED BY '|'.

Similar Messages

  • How to send a mail as .txt attachment ?

    Hi all,
    I got a requirement to write code for sending mail in oops.
    i have written code for .xls which is working fine. But requirement is to send the mail in the format of txt.
    i just only chnge the .xls to .txt where i can see the output properly in sap but problem is that i am unable to get the proper alignment. when i execute the report and see the output in sost i can see the attachment.i am downloading the attachment there only(Our server is not configured to get the mails directly) .So when i open the saved text file on my pc the output is appearing as follows...
    pernr nachn vorna
            0001 L0001 F0001
                0002 L0002 F0002
                   0003 L0003 F0003
                         0004 L0004 F0004...
    Where it should come in straight line as follows in my o/p code..
    pernr nachn vorna
    0001 L0001 F0001
    0002 L0002 F0002
    0003 L0003 F0003
    0004 L0004 F0004...
    i am puttin g my code ..please correct me where i am wrong .....waiting for your valuabel inputs..
    *& Report  ZGBTEST02
    REPORT  YSAS_MAIL2.
    *Changes done by sas
    *PARAMETERS: P_MAIL TYPE AD_SMTPADR OBLIGATORY, " G C by sas
    *P_MAIL1 TYPE AD_SMTPADR OBLIGATORY." G by sas
    TABLES: ADR6.
    SELECT-OPTIONS:P_EADDR FOR ADR6-SMTP_ADDR NO INTERVALS .
    *end of changes by sas
    DATA: I_GLT0 TYPE STANDARD TABLE OF GLT0.
    *DATA: I_pernr  TYPE STANDARD TABLE OF pa0002.  " MARA Entries
    DATA: BEGIN OF I_PERNR OCCURS 1 ,
    PERNR TYPE PA0002-PERNR,
    NACHN TYPE PA0002-NACHN,
    VORNA TYPE PA0002-VORNA,
    END OF I_PERNR..
    *      I_MARC  TYPE STANDARD TABLE OF MARC.  " MARC Entries
    DATA: L_TEXT  TYPE CHAR255.  " Text
    DATA: L_LINES TYPE I,
          L_SIZE  TYPE SOOD-OBJLEN.
    " Size of Attachment
    * Mail related
    DATA: I_CONTENT         TYPE   SOLI_TAB, " Mail content
          I_ATTACH          TYPE   SOLI_TAB, " Attachment
          I_ATTACH1         TYPE   SOLIX_TAB. " Attachment
    DATA: L_SEND_REQUEST    TYPE REF TO    CL_BCS,
                                                " E-Mail Send Request
          L_DOCUMENT        TYPE REF TO    CL_DOCUMENT_BCS,
                                                " E-Mail Attachment
          L_RECIPIENT       TYPE REF TO    IF_RECIPIENT_BCS,
                                                " Distribution List
          L_SENDER          TYPE REF TO    IF_SENDER_BCS,
                                                " Address of Sender
          L_UNAME           TYPE           SALRTDRCPT,
                                                " Sender Name(SY-UNAME)
          L_BCS_EXCEPTION   TYPE REF TO    CX_DOCUMENT_BCS,
                                                " BCS Exception
          L_ADDR_EXCEPTION  TYPE REF TO    CX_ADDRESS_BCS,
                                                " Address Exception
          L_SEND_EXCEPTION  TYPE REF TO    CX_SEND_REQ_BCS.
    " E-Mail sending Exception
    *Constants------------------------------------------------------------*
    CONSTANTS: C_TAB(1) TYPE C VALUE
               CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
                                         " Tab Character
               C_CR(1)  TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF,
                                         " Line Feed for End-Of_line
               C_EXT    TYPE SOODK-OBJTP VALUE 'TXT'. " XLS Extension
    START-OF-SELECTION.
      SELECT PERNR NACHN VORNA  FROM PA0002 INTO CORRESPONDING FIELDS OF TABLE I_PERNR UP TO 20 ROWS.
    *select * from glt0 into table i_glt0.
    * Preparing body of the Mail
    *  MOVE 'SAP Material Master Records' TO L_TEXT.
    *  APPEND L_TEXT TO I_CONTENT.
    *  CLEAR L_TEXT.
    *  APPEND L_TEXT TO I_CONTENT.
    *  MOVE 'Thanks,' TO L_TEXT.
    *  APPEND L_TEXT TO I_CONTENT.
    *  MOVE 'SAP MM' TO L_TEXT.
    *  APPEND L_TEXT TO I_CONTENT.
      MOVE '<BR>Attached is your HRIS report(s) generated from the Firm''s' TO L_TEXT.
      APPEND L_TEXT TO I_CONTENT.
      MOVE ' Human Resources  Information System (SAP).' TO L_TEXT.
      APPEND L_TEXT TO I_CONTENT.
      MOVE '<BR>  ' TO L_TEXT.
      APPEND L_TEXT TO I_CONTENT.
      MOVE '<BR>This is an automated report.' TO L_TEXT.
      APPEND L_TEXT TO I_CONTENT.
    *        MOVE '<BR>  ' TO l_text.
    *        APPEND l_text TO i_content.
      MOVE '<BR>  ' TO L_TEXT.
      APPEND L_TEXT TO I_CONTENT.
    *        MOVE '<BR>Please do not reply to this email' TO l_text.
    *        APPEND l_text TO i_content.
    *        MOVE '<BR>  ' TO l_text.
    *        APPEND l_text TO i_content.
      MOVE '<BR>Thank you.' TO L_TEXT.
      APPEND L_TEXT TO I_CONTENT.
    * Creates persistent send request
      TRY.
          L_SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
    * Creating Document
          L_DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
                                        I_TYPE  = 'RAW'
                                        I_TEXT  = I_CONTENT[]
                                        I_SUBJECT = 'Automated HRIS (SAP) Report' ).
    DATA: W_PERNR LIKE I_PERNR.
    * Preparing contents of attachment with Change Log
          PERFORM PREPARE_ATTACHMENT.
          DATA: compressed like solisti1 occurs 10 with header line.
    DATA: decompressed like solisti1 occurs 10 with header line.
          CALL FUNCTION 'TABLE_COMPRESS'
    *   IMPORTING
    *     COMPRESSED_SIZE       =
                        TABLES
    *      in                    = eerec
                          in                    = i_attach
                          out                   = compressed.
          CALL FUNCTION 'TABLE_DECOMPRESS'
            TABLES
              in  = compressed
              out = decompressed.
          DESCRIBE TABLE decompressed LINES L_LINES.
    * Size to multiplied by 2 for UNICODE enabled systems
          L_SIZE = L_LINES * 2 * 255.
    * Adding Attachment
          CALL METHOD L_DOCUMENT->ADD_ATTACHMENT
            EXPORTING
              I_ATTACHMENT_TYPE    = C_EXT
              I_ATTACHMENT_SIZE    = L_SIZE
              I_ATTACHMENT_SUBJECT = 'Hr Details'
    *          i_att_content_hex    = i_attach[].
              I_ATT_CONTENT_TEXT   = decompressed[].
    *      DESCRIBE TABLE I_MARC LINES L_LINES.
    * Size to multiplied by 2 for UNICODE enabled systems
    *      L_SIZE = L_LINES * 2 * 255.
    ** Adding Attachment
    *      CALL METHOD L_DOCUMENT->ADD_ATTACHMENT
    *        EXPORTING
    *          I_ATTACHMENT_TYPE    = C_EXT
    *          I_ATTACHMENT_SIZE    = L_SIZE
    *          I_ATTACHMENT_SUBJECT = 'MARC Details'
    *          I_ATT_CONTENT_HEX    = I_ATTACH1[].
    **          i_att_content_text   = i_attach1[].
    * Add document to send request
          CALL METHOD L_SEND_REQUEST->SET_DOCUMENT( L_DOCUMENT ).
          DATA:LR_SENDER TYPE REF TO IF_SENDER_BCS,
               LR_SEND TYPE REF TO CL_BCS.
    * Preparing the sender object
    *      LR_SENDER = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( sy-uname ).
          DATA: L1_UNAME TYPE SY-UNAME.
          L1_UNAME = SY-UNAME.
          LR_SENDER = CL_SAPUSER_BCS=>CREATE( L1_UNAME ).
    * Setting the sender
          CALL METHOD L_SEND_REQUEST->SET_SENDER
            EXPORTING
              I_SENDER = LR_SENDER.
    * E-Mail
          LOOP AT P_EADDR.
            TRANSLATE P_EADDR-LOW TO LOWER CASE.
            L_RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( P_EADDR-LOW ).
            CALL METHOD L_SEND_REQUEST->ADD_RECIPIENT
              EXPORTING
                I_RECIPIENT  = L_RECIPIENT
                I_EXPRESS    = 'U'
                I_COPY       = ' '
                I_BLIND_COPY = ' '
                I_NO_FORWARD = ' '.
            IF SY-SUBRC EQ 0.
              WRITE:/'** SUCCESS:  Email Sent to', P_EADDR-LOW COLOR COL_NORMAL.
            ELSE.
              WRITE:/'** ERROR: Failed to send Email to',P_EADDR-LOW COLOR COL_NEGATIVE .
            ENDIF.
          ENDLOOP.
    *Trigger E-Mail immediately
          L_SEND_REQUEST->SET_SEND_IMMEDIATELY( ' ' ).
          CALL METHOD L_SEND_REQUEST->SEND( ).
          COMMIT WORK.
        CATCH CX_DOCUMENT_BCS INTO L_BCS_EXCEPTION.
        CATCH CX_SEND_REQ_BCS INTO L_SEND_EXCEPTION.
        CATCH CX_ADDRESS_BCS  INTO L_ADDR_EXCEPTION.
      ENDTRY.
    *&      Form  PREPARE_ATTACHMENT
    FORM PREPARE_ATTACHMENT .
      FIELD-SYMBOLS: <LFS_TABLE>,    " Internal table structure
                     <LFS_CON>.      " Field Content
      DATA: L_TEXT TYPE CHAR1024.     " Text content for mail attachment
      DATA: L_CON TYPE STRING. "(50) TYPE c.        " Field Content in character format
      DATA: L_STR TYPE STRING,
            L_STR1 TYPE STRING.
    *data: w_pernr type TABLE OF I_PERNR.
      DATA: LS_SOLIX TYPE SOLIX.
    *  CONCATENATE 'PERNR' 'FIRST NAME' 'Last Name' C_CR INTO L_TEXT SEPARATED BY '|'.
    *  append l_text to i_attach.
    *  clear l_text.
    * Columns to be tab delimeted
      LOOP AT I_PERNR ASSIGNING <LFS_TABLE>.
        DO.
          ASSIGN COMPONENT SY-INDEX OF STRUCTURE <LFS_TABLE>
                 TO <LFS_CON>.
          IF SY-SUBRC NE 0.
            CONCATENATE C_CR L_TEXT INTO L_TEXT.
    *        CONCATENATE l_str c_cr l_text INTO l_str.
    *        ls_solix-line = l_text.
    *        APPEND ls_solix TO i_attach.
            APPEND L_TEXT TO I_ATTACH.
            EXIT.
          ELSE.
            CLEAR: L_CON.
            MOVE <LFS_CON> TO L_CON.
            CONDENSE L_CON.
            IF SY-INDEX = 1.
              CLEAR: L_TEXT.
              MOVE L_CON TO L_TEXT.
            ELSE.
              CONCATENATE L_TEXT L_CON INTO L_TEXT
                 SEPARATED BY C_TAB.
            ENDIF.
          ENDIF.
        ENDDO.
      ENDLOOP.
    *  i_attach1[] = i_attach[].
    ENDFORM.                    " PREPARE_ATTACHMENT
    Please if any one having 6.0 version please upload it and see..
    Regards
    Sas

    Hi ,
    Did you downloaded from  SOST  using the display icon and inside that 4th tab for attachment ....
    and see?
    Regards
    sas
    pS: THE FIRST page is not allowing the spaces in sdn...
    i am getting o/p as
    pernr vochn norna
    .........0001 f0001 l0001
    .................0002 F0002 L0002
    .......................0003 F0003 L0003.....
    Please remove dots and understand that is the o/p i am getting in my presenation file
    i just expecting the o/p as told earlier..
    Regards
    sas

  • How to send automatic mail and put attache file on batch file ?

    how to send automatic mail and put attache file on batch file ?
    START MAILTO:[email protected]?SUBJECT=PHONE%CALL^&BODY=Testing

    Hi,
    Do you want to use a batch file to create new email message (including recipients, subject and email body) with attachments? If so, I'd recommend you post your question in the Scripting Guys forum for further assistance:
    https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Please feel free to let me know if I've misunderstood something.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to send a mail with PDF attachment

    Hello
    Good Day!
    We have a requirement to send the mail with pdf attachment. Pdf file will be remain same for all mails and it will be placed at server. We are on R12.4 and below is the database information :
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE 11.2.0.3.0 Production
    TNS for Linux: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    Thanks a ton for your anticipated help!
    Thanks
    Gaurav

    The word URGENT is considered as rude in this forum.. Nobody here is getting paid for the ansers they are giving..
    Just have a look at These threads.Those will help you.

  • How to send a mail prior to the due date

    Hi all,
                 I would like to send a mail prior to the due date. Please let me know how to go to the previous step after the loop is executed once in workflows.
    Thanks,
    Sirisha N.

    Hi all,
                 I would like to send a mail prior to the due date. Please let me know how to go to the previous step after the loop is executed once in workflows.
    Thanks,
    Sirisha N.

  • How to send a mail automatically based on a date from ORACLE database

    Hi,
    I want to send a mail automatically based on a date from ORACLE database.
    Please help me.
    thanks
    --Sara                                                                                                                                                                                                                                   

    programs are available on net to send mail directly from oracle ie procedure s in oracle sending mails

  • How to send a mail as an attachment in a mail with AppleScript?

    Hi,
    I want to manage my spam using the advices found in support.apple website :
    OS X Mail
    Open the message and choose “Forward as Attachment” from the Message menu.
    Forward the message to iCloud [email protected].
    Forward the message again to abuse@domain, replacing domain with the part of the sender's email address after the @ symbol. For example, if the sender's email address is [email protected], forward the message to [email protected].
    I don't know how to make a message as an attachment...
    set theAttachment to theMessage
    make new attachment with properties {file name:theAttachment} at after last paragraph
    Here is my whole script, if it runs, it could be useful :
    tell application "Mail"
      -- envoi les messages sélectionnés en PJ à [email protected]
              set theMessages to the selection
              repeat with theMessage in theMessages
                        set theAttachment to theMessage
                        set newMessage to make new outgoing message at end of outgoing messages
                        tell newMessage
                                  set subject to "Fwd: " & theMessage's subject
      make new to recipient with properties {address:"[email protected]"}
                                  tell content of theMessage
      make new attachment with properties {file name:theAttachment} at after last paragraph
                                  end tell
                        end tell
      send newMessage
              end repeat
      -- envoi les messages sélectionnés en PJ à abuse@<domaine du spammeur>
              set theMessages to the selection
              repeat with theMessage in theMessages
                        set theAttachment to theMessage
                        set newMessage to make new outgoing message at end of outgoing messages
                        tell newMessage
                                  set subject to "Fwd: " & theMessage's subject
                                  set theSpamAddress to theMessage's sender
                                  set AppleScript's text item delimiters to {"@"}
                                  set spamerDomainName to text item 2 of theSpamAddress
                                  set theNewSpamAddress to "abuse@" & spamerDomainName
      make new to recipient with properties {address:theNewSpamAddress}
                                  tell content of theMessage
      make new attachment with properties {file name:theAttachment} at after last paragraph
                                  end tell
                        end tell
      send newMessage
              end repeat
    end tell
    Thank you!

    Perfect!
    You clearly give me the way. Actually I have used the AppleScript Language Guide from https://developer.apple.com to finalize my AppleScript.
    You just need to select the spam message(s) in "Mail" application, then run the script.
    As I mentionned previously, it just do this automatically :
    OS X Mail
    Open the message and choose “Forward as Attachment” from the Message menu.
    Forward the message to iCloud [email protected].
    Forward the message again to abuse@domain, replacing domain with the part of the sender's email address after the @ symbol. For example, if the sender's email address is [email protected], forward the message to [email protected].
    Here is the entire working script :
    -- Ce script permet de lutter contre le spam.
    -- Je me suis appuyé sur les conseils sur http://support.apple.com/kb/TS4019?viewlocale=fr_FR
    tell application "Mail"
              set theMessages to the selection
              repeat with theMessage in theMessages
      -- enregistre le message dans un fichier pour le mettre en PJ ensuite
                        set msgContent to source of theMessage
                        set tmpFile to ((path to desktop) as rich text) & "ForwardedMessage"
                        set referenceNumber to open for access tmpFile with write permission
      write msgContent to referenceNumber
      close access referenceNumber
      -- envoi le message sélectionné en PJ à [email protected]
                        set newMessage to make new outgoing message at end of outgoing messages
                        tell newMessage
                                  set subject to "Fwd: " & theMessage's subject
      make new to recipient with properties {address:"[email protected]"}
                                  tell content of newMessage
      make new attachment with properties {file name:tmpFile} at after last paragraph
                                  end tell
                        end tell
      send newMessage
      -- envoi le message sélectionné en PJ à abuse@<domaine du spammeur>
                        set newMessage to make new outgoing message at end of outgoing messages
                        tell newMessage
                                  set subject to "Fwd: " & theMessage's subject
                                  set theSpamAddress to theMessage's sender
                                  set AppleScript's text item delimiters to {"@"}
                                  set theSpamAddress to text item 2 of theSpamAddress
                                  set AppleScript's text item delimiters to {">"}
                                  set spamerDomainName to text item 1 of theSpamAddress
                                  set theNewSpamAddress to "abuse@" & spamerDomainName
      make new to recipient with properties {address:theNewSpamAddress}
                                  tell content of newMessage
      make new attachment with properties {file name:tmpFile} at after last paragraph
                                  end tell
                        end tell
      send newMessage
              end repeat
    end tell

  • How to send e-mail with an attachment from remote database server.???

    Hi All,
    I have tried the simple mail sending and with the attachment using UTL_SMTP. But the problem is , it is sending the mail with attachment of the file name i give, it takes and creates that file and sends as attachment not from the actual file location. I am trying to attach the file which i stored in remote database server.
    The following code I tried. But not worked for attachment
    DECLARE
       v_From       VARCHAR2(80) := '[email protected]';
       v_Recipient  VARCHAR2(80) := '[email protected]';
       v_Subject    VARCHAR2(80) := 'test subject';
       v_Mail_Host  VARCHAR2(30) := 'pop3.somedomain.com';
       v_Mail_Conn  utl_smtp.Connection;
       crlf         VARCHAR2(2)  := chr(13)||chr(10);
    BEGIN
      v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
      utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
      utl_smtp.Mail(v_Mail_Conn, v_From);
      utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
      utl_smtp.Data(v_Mail_Conn,
        'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
        'From: '   || v_From || crlf ||
        'Subject: '|| v_Subject || crlf ||
        'To: '     || v_Recipient || crlf ||
        'MIME-Version: 1.0'|| crlf ||     -- Use MIME mail standard
        'Content-Type: multipart/mixed;'|| crlf ||
        ' boundary="-----SECBOUND"'|| crlf ||
        crlf ||
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/html;'|| crlf ||
        'Content-Transfer_Encoding: 7bit'|| crlf ||
        crlf ||
        'some message text'|| crlf ||     -- Message body
        'more message text'|| crlf ||
        crlf ||
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/html;'|| crlf ||
        ' name="Fund Authorization report"'|| crlf ||
        'Content-Transfer_Encoding: 8bit'|| crlf ||
        'Content-Disposition: attachment;'|| crlf ||
        ' filename="/usr/tmp/Test.html"'|| crlf ||
        crlf ||
        'HTML Attachment'|| crlf ||     -- Content of attachment
        crlf ||
        '-------SECBOUND--'               -- End MIME mail
      utl_smtp.Quit(v_mail_conn);
    EXCEPTION
      WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
        raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
    END;How can I attach a file which is stored in database server and send it in a mail.
    Please someone help me in this.
    Thanks,
    Alaka.

    Try this code
    Regards Salim.
    CREATE OR REPLACE TRIGGER EmailOnServerErr AFTER SERVERERROR ON DATABASE
    DECLARE
       mail_conn       UTL_SMTP.connection;
       crlf            VARCHAR2(2) := chr(13)||chr(10);
       msg             VARCHAR2(32760);
       sid_name        VARCHAR2(16);
       bdump_dest      VARCHAR2(128);
       smtp_relay      VARCHAR2(32) := 'MyMailRelay';
       recipient_address  VARCHAR2(64) := '[email protected]';
       sender_address     VARCHAR2(64) := '[email protected]';
       mail_port       NUMBER := 25;
       log_file_handle UTL_FILE.FILE_TYPE;
       log_file_dir    VARCHAR2(256) := 'ERR_LOG_DIR';
       log_file_name   VARCHAR2(256) := 'OracleErrors.log';
       maxlinesize     NUMBER := 32767;
       session_rec     sys.v_$session%ROWTYPE;
       audit_rec       sys.dba_audit_trail%ROWTYPE;
       auditing        BOOLEAN;
       LinesOfSQL      BINARY_INTEGER;
       offending_sql   DBMS_STANDARD.ora_name_list_t;
       CURSOR bdump_cur IS
          SELECT TRIM(value)
          FROM v$parameter
          WHERE name = 'background_dump_dest'
       CURSOR sid_cur IS
          SELECT TRIM(instance_name)
          FROM v$instance
       CURSOR session_cur IS
          SELECT s.*
          FROM v$session s
          WHERE s.sid = dbms_support.mysid
       CURSOR audit_trail_cur(AUDSID IN NUMBER) IS
          SELECT *
          FROM dba_audit_trail
          WHERE sessionid = AUDSID
    BEGIN
       IF (USER = 'SYSTEM' OR USER = 'SYS') THEN
          -- Ignore this error
          NULL;
       ELSIF IS_SERVERERROR (1034) THEN
          -- Ignore this error
          NULL;
       ELSE
          -- get the sid
          OPEN sid_cur;
          FETCH sid_cur INTO sid_name;
          CLOSE sid_cur;
          -- get the location of the alert log
          OPEN bdump_cur;
          FETCH bdump_cur INTO bdump_dest;
          CLOSE bdump_cur;
          -- get the session information
          OPEN session_cur;
          FETCH session_cur INTO session_rec;
          CLOSE session_cur;
          -- get the audit_trail information if it exists
          OPEN audit_trail_cur(session_rec.audsid);
          FETCH audit_trail_cur INTO audit_rec;
          auditing := audit_trail_cur%FOUND;
          CLOSE audit_trail_cur;
          IF session_rec.program = 'MyProgram.exe' THEN
             NULL;  -- ignore actions from MyProgram - that's where I do maintenance
          ELSE
             -- compose the message
             msg := 'Subject: Oracle error '||' on '||sid_name||crlf;
             msg := msg||'To: '||recipient_address||crlf;
             msg := msg||'For more information see the alert log file located at:'||crlf;
             msg := msg||bdump_dest||'/alert_'||sid_name||'.log'||crlf;
             msg := msg||'or the error log file: $'||log_file_dir||'/'||log_file_name||crlf;
             msg := msg||'Error Time='||TO_CHAR(SYSDATE,'DD-Mon-YYYY HH24:MI:SS')||crlf;
             msg := msg||DBMS_UTILITY.FORMAT_CALL_STACK||crlf;
             LinesOfSQL := sql_txt(offending_sql);
             msg := msg||'Offending SQL is:'||crlf;
             FOR loop_counter IN offending_sql.FIRST..offending_sql.LAST
             LOOP
                msg := msg||offending_sql(loop_counter);
             END LOOP;
             msg := msg||crlf||'----- PL/SQL Error Stack -----'||crlf;
             msg := msg||DBMS_UTILITY.FORMAT_ERROR_STACK||crlf;
             msg := msg||'V$SESSION.SADDR='   ||session_rec.saddr   ||crlf;
             msg := msg||'V$SESSION.SID='     ||session_rec.sid     ||crlf;
             msg := msg||'V$SESSION.SERIAL#=' ||session_rec.serial# ||crlf;
             msg := msg||'V$SESSION.AUDSID='  ||session_rec.audsid  ||crlf;
             msg := msg||'V$SESSION.PADDR='   ||session_rec.paddr   ||crlf;
             msg := msg||'V$SESSION.USER#='   ||session_rec.user#   ||crlf;
             msg := msg||'V$SESSION.USERNAME='||session_rec.username||crlf;
             msg := msg||'V$SESSION.COMMAND=' ||session_rec.command ||crlf;
             msg := msg||'V$SESSION.OWNERID=' ||session_rec.ownerid ||crlf;
             msg := msg||'V$SESSION.TADDR='   ||NVL(session_rec.taddr   ,'Null')||crlf;
             msg := msg||'V$SESSION.LOCKWAIT='||NVL(session_rec.lockwait,'Null')||crlf;
             msg := msg||'V$SESSION.STATUS='  ||NVL(session_rec.status  ,'Null')||crlf;
             msg := msg||'V$SESSION.SERVER='  ||NVL(session_rec.server  ,'Null')||crlf;
             msg := msg||'V$SESSION.SCHEMA#=' ||session_rec.schema#||crlf;
             msg := msg||'V$SESSION.SCHEMANAME=' ||NVL(session_rec.schemaname,'Null')||crlf;
             msg := msg||'V$SESSION.OSUSER='     ||NVL(session_rec.osuser    ,'Null')||crlf;
             msg := msg||'V$SESSION.PROCESS='    ||NVL(session_rec.process   ,'Null')||crlf;
             msg := msg||'V$SESSION.MACHINE='    ||NVL(session_rec.machine   ,'Null')||crlf;
             msg := msg||'V$SESSION.TERMINAL='   ||NVL(session_rec.terminal  ,'Null')||crlf;
             msg := msg||'V$SESSION.PROGRAM='    ||NVL(session_rec.program   ,'Null')||crlf;
             msg := msg||'V$SESSION.TYPE='       ||NVL(session_rec.type      ,'Null')||crlf;
             msg := msg||'V$SESSION.SQL_ADDRESS='    ||session_rec.sql_address  ||crlf;
             msg := msg||'V$SESSION.SQL_HASH_VALUE=' ||NVL(TO_CHAR(session_rec.sql_hash_value) ,'Null')||crlf;
             msg := msg||'V$SESSION.PREV_SQL_ADDR='  ||session_rec.prev_sql_addr||crlf;
             msg := msg||'V$SESSION.PREV_HASH_VALUE='||NVL(TO_CHAR(session_rec.prev_hash_value),'Null')||crlf;
             msg := msg||'V$SESSION.MODULE='     ||NVL(session_rec.module              ,'Null')||crlf;
             msg := msg||'V$SESSION.MODULE_HASH='||NVL(TO_CHAR(session_rec.module_hash),'Null')||crlf;
             msg := msg||'V$SESSION.ACTION='     ||NVL(session_rec.action              ,'Null')||crlf;
             msg := msg||'V$SESSION.ACTION_HASH='||NVL(TO_CHAR(session_rec.action_hash),'Null')||crlf;
             msg := msg||'V$SESSION.CLIENT_INFO='||NVL(session_rec.client_info         ,'Null')||crlf;
             msg := msg||'V$SESSION.FIXED_TABLE_SEQUENCE='||NVL(TO_CHAR(session_rec.fixed_table_sequence),'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_OBJ#='  ||NVL(TO_CHAR(session_rec.row_wait_obj#)  ,'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_FILE#=' ||NVL(TO_CHAR(session_rec.row_wait_file#) ,'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_BLOCK#='||NVL(TO_CHAR(session_rec.row_wait_block#),'Null')||crlf;
             msg := msg||'V$SESSION.ROW_WAIT_ROW#='  ||NVL(TO_CHAR(session_rec.row_wait_row#)  ,'Null')||crlf;
             msg := msg||'V$SESSION.LOGON_TIME='     ||NVL(TO_CHAR(session_rec.logon_time,'DD-Mon-YYYY HH24:MI:SS'),'Null')||crlf;
             msg := msg||'V$SESSION.LAST_CALL_ET='   ||NVL(TO_CHAR(session_rec.last_call_et)   ,'Null')||crlf;
             msg := msg||'V$SESSION.PDML_ENABLED='   ||NVL(session_rec.pdml_enabled   ,'Null')||crlf;
             msg := msg||'V$SESSION.FAILOVER_TYPE='  ||NVL(session_rec.failover_type  ,'Null')||crlf;
             msg := msg||'V$SESSION.FAILOVER_METHOD='||NVL(session_rec.failover_method,'Null')||crlf;
             msg := msg||'V$SESSION.FAILED_OVER='    ||NVL(session_rec.failed_over    ,'Null')||crlf;
             msg := msg||'V$SESSION.RESOURCE_CONSUMER_GROUP='||NVL(session_rec.resource_consumer_group,'Null')||crlf;
             msg := msg||'V$SESSION.PDML_STATUS='    ||NVL(session_rec.pdml_status    ,'Null')||crlf;
             msg := msg||'V$SESSION.PDDL_STATUS='    ||NVL(session_rec.pddl_status    ,'Null')||crlf;
             msg := msg||'V$SESSION.PQ_STATUS='      ||NVL(session_rec.pq_status      ,'Null')||crlf;
             IF auditing THEN
                msg := msg||'DBA_AUDIT_TRAIL.OS_USERNAME='  ||NVL(audit_rec.os_username,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.USERNAME='     ||NVL(audit_rec.username   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.USERHOST='     ||NVL(audit_rec.userhost   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.TERMINAL='     ||NVL(audit_rec.terminal   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.TIMESTAMP='    ||TO_CHAR(audit_rec.timestamp,'DD-Mon-YYYY HH24:MI:SS')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.OWNER='        ||NVL(audit_rec.owner      ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.OBJ_NAME='     ||NVL(audit_rec.obj_name   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ACTION='       ||audit_rec.action   ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ACTION_NAME='  ||NVL(audit_rec.action_name   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.NEW_OWNER='    ||NVL(audit_rec.new_owner     ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.NEW_NAME='     ||NVL(audit_rec.new_name      ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.OBJ_PRIVILEGE='||NVL(audit_rec.obj_privilege ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.SYS_PRIVILEGE='||NVL(audit_rec.sys_privilege ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ADMIN_OPTION=' ||NVL(audit_rec.admin_option  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.GRANTEE='      ||NVL(audit_rec.grantee       ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.AUDIT_OPTION=' ||NVL(audit_rec.audit_option  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.SES_ACTIONS='  ||NVL(audit_rec.ses_actions   ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_TIME='  ||NVL(TO_CHAR(audit_rec.logoff_time)  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LREAD=' ||NVL(TO_CHAR(audit_rec.logoff_lread) ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_PREAD=' ||NVL(TO_CHAR(audit_rec.logoff_pread) ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LWRITE='||NVL(TO_CHAR(audit_rec.logoff_lwrite),'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_DLOCK=' ||NVL(audit_rec.logoff_dlock  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.COMMENT_TEXT=' ||NVL(audit_rec.comment_text  ,'Null')||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.SESSIONID='    ||audit_rec.sessionid   ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.ENTRYID='      ||audit_rec.entryid     ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.STATEMENTID='  ||audit_rec.statementid ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.RETURNCODE='   ||audit_rec.returncode  ||crlf;
                msg := msg||'DBA_AUDIT_TRAIL.PRIV_USED='    ||NVL(audit_rec.priv_used,'Null')||crlf;
             END IF;
             msg := msg||'-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'||crlf||crlf;
             -- write the message to the error log file
             log_file_handle := UTL_FILE.FOPEN (log_file_dir, log_file_name, 'A',maxlinesize);
             UTL_FILE.PUT_LINE(log_file_handle,msg);
             UTL_FILE.FCLOSE(log_file_handle);
             -- send the message by Email
             mail_conn := UTL_SMTP.open_connection(smtp_relay, mail_port);
             UTL_SMTP.HELO(mail_conn, smtp_relay);
             UTL_SMTP.MAIL(mail_conn, sender_address);
             UTL_SMTP.RCPT(mail_conn, recipient_address);
             UTL_SMTP.DATA(mail_conn, msg);
             UTL_SMTP.QUIT(mail_conn);
          END IF; -- client_program = MyProgram.exe
       END IF;
    END;
    /

  • How to send Java Mail with EXCEL attachment?

    I tried the following:
    ByteArrayDataSource bs = new ByteArrayDataSource (is, "application/excel");
    as my datasource (all other apis are fine)
    But when I send this message with this datasource as attachment,I get a ParseException with the VM complaining about malformed headers.
    Please help

    Exactly when do you get the ParseException, and what's the message
    with the exception?
    BTW, "application/excel" is not the correct MIME type for Microsoft Office
    Excel files. The correct MIME type is "application/vnd.ms-excel".
    http://www.iana.org/assignments/media-types/application/vnd.ms-excel

  • How to send a mail by ckicking the button using java

    hi,
    how to send a mail by clicking the button (like payroll silp in that contain one button if we click that it autometically go through the mail as a attachment) pls frd to me my gmail is [email protected]

    Hi,
    It seems we are doing the homework for you; to make you start with something; look at the sample code below and try to understand it first then put the right values
    to send an email with an attachement.
    import java.awt.BorderLayout;
    import java.awt.event.ActionEvent;
    import java.util.Date;
    import java.util.Properties;
    import javax.activation.DataHandler;
    import javax.activation.FileDataSource;
    import javax.mail.Message;
    import javax.mail.MessagingException;
    import javax.mail.Multipart;
    import javax.mail.Session;
    import javax.mail.Transport;
    import javax.mail.internet.InternetAddress;
    import javax.mail.internet.MimeBodyPart;
    import javax.mail.internet.MimeMessage;
    import javax.mail.internet.MimeMultipart;
    import javax.swing.AbstractAction;
    import javax.swing.Action;
    import javax.swing.JButton;
    import javax.swing.JComponent;
    import javax.swing.JFrame;
    import javax.swing.JTextField;
    public class Main {
          * @param args
         public static void main(String[] args) {
              // Create the frame
              String title = "Frame Title";
              JFrame frame = new JFrame(title);
              // Create a component to add to the frame
              JComponent comp = new JTextField();
              Action action = new AbstractAction("Button Label") {
                   // This method is called when the button is pressed
                   public void actionPerformed(ActionEvent evt) {
                        System.out.println("sending email with attachment");
                        sendEmail();
              // Create the button
              JButton button = new JButton(action);
              // Add the component to the frame's content pane;
              // by default, the content pane has a border layout
              frame.getContentPane().add(comp, BorderLayout.SOUTH);
              frame.getContentPane().add(button, BorderLayout.NORTH);
              // Show the frame
              int width = 300;
              int height = 300;
              frame.setSize(width, height);
              frame.setVisible(true);
         protected static void sendEmail() {
              String from = "me@localhost";
              String to = "me@localhost";
              String subject = "Important Message";
              String bodyText = "This is a important message with attachment";
              String filename = "c:\\tmp\\message.pdf";
              Properties properties = new Properties();
              properties.put("mail.stmp.host", "localhost");
              properties.put("mail.smtp.port", "25");
              Session session = Session.getDefaultInstance(properties, null);
              try {
                   MimeMessage message = new MimeMessage(session);
                   message.setFrom(new InternetAddress(from));
                   message.setRecipient(Message.RecipientType.TO, new InternetAddress(
                             to));
                   message.setSubject(subject);
                   message.setSentDate(new Date());
                   // Set the email message text.
                   MimeBodyPart messagePart = new MimeBodyPart();
                   messagePart.setText(bodyText);
                   // Set the email attachment file
                   MimeBodyPart attachmentPart = new MimeBodyPart();
                   FileDataSource fileDataSource = new FileDataSource(filename) {
                        @Override
                        public String getContentType() {
                             return "application/octet-stream";
                   attachmentPart.setDataHandler(new DataHandler(fileDataSource));
                   attachmentPart.setFileName(filename);
                   Multipart multipart = new MimeMultipart();
                   multipart.addBodyPart(messagePart);
                   multipart.addBodyPart(attachmentPart);
                   message.setContent(multipart);
                   Transport.send(message);
              } catch (MessagingException e) {
                   e.printStackTrace();
    }The sample above is not ideal so you need to go through it and start to ask me some questions if you have
    Let me know if you miss something
    Regards,
    Alan Mehio
    London,UK

  • How to send a mail with HTML body from Oracle

    Hi Team,
    Can somebody guide me how to send a mail with HTML body from oracle.
    Here is the piece of code i am trying to send a mail.
    procedure SEND_MAIL is
    cursor c_1 is select * from table_name;
    l_mail_id varchar2(40);
    -- ls_mailhost VARCHAR2(64) := Mailhost;
    ls_from VARCHAR2(64) := ‘[email protected]’
    ls_subject VARCHAR2(200);
    ls_to VARCHAR2(64);
    l_mail_conn UTL_SMTP.connection;
    ls_left_menu_name VARCHAR2(64);
    ll_emp_num number(8);
    begin
    for i in c_1 loop
    begin
    l_mail_conn := UTL_SMTP.OPEN_CONNECTION('IP');
    UTL_SMTP.HELO(l_mail_conn, 'IP');
    UTL_SMTP.MAIL(l_mail_conn, LS_FROM);
    UTL_SMTP.RCPT(L_mail_conn, LS_TO);
    UTL_SMTP.DATA(l_mail_conn,'From: ' ||ls_from || utl_tcp.crlf ||
    'To: ' ||ls_to || utl_tcp.crlf ||
    'Subject: ' ||ls_subject|| utl_tcp.crlf);
    UTL_SMTP.QUIT(l_mail_conn);
    exception
    when no_data_found then
    null;
    when others then
    RAISE_APPLICATION_ERROR(-20000, 'Failed to send mail due to the following error: ' || sqlerrm);
    end;
    end loop;
    end;
    Thnx

    Hi Nicolas!
    Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
    If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
    SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
    Hope this helps!
    Regards
    Geir

  • How to send an email with an attachment to the customers email address.

    Hi friends,
    How to send an email with an attachment to the customers email address.
    the attachment will be in doc format.
    Having an Header
    the data which i am sending must be in a TABLE format
    with 5 columns.
    and each column must have a column heading
    Please guide me.
    Thanks in Advance,
    Ganesh.

    *& Report  ZEMAIL_ATTACH                                               *
    *& Example of sending external email via SAPCONNECT                    *
    REPORT  ZEMAIL_ATTACH                   .
    TABLES: ekko.
    PARAMETERS: p_email   TYPE somlreci1-receiver .
    *Here get the values of mail from the table adn6 for the customer address.
    TYPES: BEGIN OF t_ekpo,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
          wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
      ebeln(10) TYPE c,
      ebelp(5)  TYPE c,
      aedat(8)  TYPE c,
      matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            w_cnt TYPE i,
            w_sent_all(1) TYPE c,
            w_doc_data LIKE sodocchgi1,
            gd_error    TYPE sy-subrc,
            gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
      Retrieve sample data from table ekpo
      PERFORM data_retrieval.
      Populate table with detaisl to be entered into .xls file
      PERFORM build_xls_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    Populate message body text
      perform populate_email_message_body.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_message
                                          it_attach
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'DOC'
                                          'filename'
                                 changing gd_error
                                          gd_reciever.
      Instructs mail send program for SAPCONNECT to send email(rsconn01)
      PERFORM initiate_mail_execute_program.
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp aedat matnr
       UP TO 10 ROWS
        FROM ekpo
        INTO TABLE it_ekpo.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  BUILD_XLS_DATA_TABLE
          Build data table for .xls document
    FORM build_xls_data_table.
      CONSTANTS: con_cret TYPE x VALUE '0D',  "OK for non Unicode
                 con_tab TYPE x VALUE '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
       con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
       con_cret type c value cl_abap_char_utilities=>CR_LF.
      CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
             INTO it_attach SEPARATED BY con_tab.
      CONCATENATE con_cret it_attach  INTO it_attach.
      APPEND  it_attach.
      LOOP AT it_ekpo INTO wa_charekpo.
        CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                    wa_charekpo-aedat wa_charekpo-matnr
               INTO it_attach SEPARATED BY con_tab.
        CONCATENATE con_cret it_attach  INTO it_attach.
        APPEND  it_attach.
      ENDLOOP.
    ENDFORM.                    " BUILD_XLS_DATA_TABLE
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = pit_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *&      Form  POPULATE_EMAIL_MESSAGE_BODY
           Populate message body text
    form populate_email_message_body.
      REFRESH it_message.
      it_message = 'Please find attached a list test ekpo records'.
      APPEND it_message.
    endform.                    " POPULATE_EMAIL_MESSAGE_BODY
    regards,
    venkat.

  • How to send a mail in workflow keeping 1 receiver in CC and the other in TO

    Hi,
    Can anybody tell me how to send a mail in workflow keeping 1 receiver in CC and the other in TO.
    I need to send a mail to an employee keeping his/her manager in CC through workflow.
    Regards,
    Lavanya

    Hi Lavanya,
    I dont think its possible using Send mail step type.
    But it can be done by using the FM SO_NEW_DOCUMENT_SEND_API1. Just create a method and Call this FM accordingly.
    Thanks,
    Viji.

  • How to send a mail in pdf format file in sbwp??

    how to send a mail in pdf format file in sbwp?? and how to read the content of the mail?

    Refer the following link for Sample Program:
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm

  • How to send HTML mail with images multipart/related message

    Hi,
    Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
    Thanks

    Hi,
    Could any body tell me how to send HTML mail with
    ith images in "multipart/related" message,if any body
    can give the code ,it would be helpful.
    ThanksHi!
    Refer to
    http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
    I've found it very helpful.
    Look at the last part for a code showing how to send HTML mail!
    Regards

Maybe you are looking for

  • How to add search help for field in ALV object

    Hello, In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table

  • How to read a DVD with a external drive, how to read a DVD with a external drive

    Hello I replaces my internal DVD drive with a SSD drive. When I start the dvd program player or a software like Toast, I get , of course, an error message. I saw on internet the way to edit (with HewFiend program) and change this /Système/Bibliothèqu

  • How to install on new hard drive

    I have a macbook pro 13' mid 2012. I just replacedthe internal hard drive and don't know how to install the osx. I tried partitioning the hard drive to have a GUID map scheme but it got stuck on the connecting with disk step (dont remember what its c

  • Value Type and Report Type in Report Painter Report

    Is there a way I can get both characteristics WRTPP and RRCTY in one table? Or, can I work with two different tables in creating Report Painter report? I need to get the planned values of cost elements with record type 1 and value type 10 to show und

  • Can't get nouveau to work

    I'm currently using xf86-video-intel for my video driver, however last night I attempted to use xf86-video-nouveau for my video driver, but could not get it to work. I've followed all the steps listed in the nouveau wiki, and still can't load a GUI.