How to send a Mail purchase order automaticaly from ME22N
How to send a Mail purchase order automaticaly from ME22N
Hi,
First create an entry via NACE with medium = 5 ( External send ) with all other details same as normal print option. Now ensure that vendor master of the po has got the external e-mail id of the vendor. Now go to ME22n in mesages create a message with medium = 5 ( External Send ). Go to communication method, key in Communication strategy.Go to Further date & against Despatch time pick up option 4 viz. Send immeidately while saving an application. Now once you press the save button it will be sent to the address maintained in the vendor master of the vendor of the PO. Please note you require some basic settings from BASIS side as well.
I hope this helps,
You may also refer to the SAP note 191470.
Regards
Raju Chitale
Similar Messages
-
How to send a mail with HTML body from Oracle
Hi Team,
Can somebody guide me how to send a mail with HTML body from oracle.
Here is the piece of code i am trying to send a mail.
procedure SEND_MAIL is
cursor c_1 is select * from table_name;
l_mail_id varchar2(40);
-- ls_mailhost VARCHAR2(64) := Mailhost;
ls_from VARCHAR2(64) := ‘[email protected]’
ls_subject VARCHAR2(200);
ls_to VARCHAR2(64);
l_mail_conn UTL_SMTP.connection;
ls_left_menu_name VARCHAR2(64);
ll_emp_num number(8);
begin
for i in c_1 loop
begin
l_mail_conn := UTL_SMTP.OPEN_CONNECTION('IP');
UTL_SMTP.HELO(l_mail_conn, 'IP');
UTL_SMTP.MAIL(l_mail_conn, LS_FROM);
UTL_SMTP.RCPT(L_mail_conn, LS_TO);
UTL_SMTP.DATA(l_mail_conn,'From: ' ||ls_from || utl_tcp.crlf ||
'To: ' ||ls_to || utl_tcp.crlf ||
'Subject: ' ||ls_subject|| utl_tcp.crlf);
UTL_SMTP.QUIT(l_mail_conn);
exception
when no_data_found then
null;
when others then
RAISE_APPLICATION_ERROR(-20000, 'Failed to send mail due to the following error: ' || sqlerrm);
end;
end loop;
end;
ThnxHi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir -
How to send a mail to a person from after completeing bdc .
Hi Xperts,
Please send me a options how to send a mail to a person after completing a bdc or from any report program.
mailed can be a sapuser or other service provider(ex:yahoo,gmail.any thing)
Please Any one i want it now .
Thank You.FUNCTION RS_SEND_MAIL_FOR_SPOO* Email ITAB structure
DATA: BEGIN OF EMAIL_ITAB OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF EMAIL_ITAB.
DATA: T_EMAIL LIKE SOOS1-RECEXTNAM. "EMail distribution list
CONSTANTS: C_EMAIL_DISTRIBUTION LIKE SOOS1-RECEXTNAM VALUE
[email protected],[email protected].
Initialization
REFRESH EMAIL_ITAB.
Populate data
EMAIL_ITAB-LINE = Email body text 1.
APPEND EMAIL_ITAB.
EMAIL_ITAB-LINE = Email body text 2.
APPEND EMAIL_ITAB.
T_EMAIL = C_EMAIL_DISTRIBUTION.
--- EMAIL FUNCTION ---------------------------------------------------
REQUIRMENTS:
1) The user running the program needs a valid email address in their
address portion of tx SU01 under external comms -> SMTP -> internet
address.
2) A job called SAP_EMAIL is running with the following parameters:
Program: RSCONN01 Variant: INT User: XXX
This program moves mail from the outbox to the mail server using
RFC destination: SAP_INTERNET_GATEWAY_SERVER
INTERFACE:
1) APPLICATION: Anything
2) EMAILTITLE: EMail subject
3) RECEXTNAM: EMail distribution lists separated by commas
4) TEXTTAB: Internal table for lines of the email message
EXCEPTIONS:
Send OK = 0 otherwise there was a problem with the send.
CALL FUNCTION 'Z_SEND_EMAIL_ITAB'
EXPORTING
APPLICATION = 'EMAIL'
EMAILTITLE = 'Email Subject'
RECEXTNAM = T_EMAIL
TABLES
TEXTTAB = EMAIL_ITAB
EXCEPTIONS
OTHERS = 1.
Function Z_SEND_EMAIL_ITAB
""Local interface:
*" IMPORTING
*" VALUE(APPLICATION) LIKE SOOD1-OBJNAM
*" VALUE(EMAILTITLE) LIKE SOOD1-OBJDES
*" VALUE(RECEXTNAM) LIKE SOOS1-RECEXTNAM
*" TABLES
*" TEXTTAB STRUCTURE SOLI
*- local data declaration
DATA: OHD LIKE SOOD1,
OID LIKE SOODK,
TO_ALL LIKE SONV-FLAG,
OKEY LIKE SWOTOBJID-OBJKEY.
DATA: BEGIN OF RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF RECEIVERS.
*- fill odh
CLEAR OHD.
OHD-OBJLA = SY-LANGU.
OHD-OBJNAM = APPLICATION.
OHD-OBJDES = EMAILTITLE.
OHD-OBJPRI = 3.
OHD-OBJSNS = 'F'.
OHD-OWNNAM = SY-UNAME.
*- send Email
CONDENSE RECEXTNAM NO-GAPS.
CHECK RECEXTNAM <> SPACE AND RECEXTNAM CS '@'.
*- for every individual recipient send an Email
(see OSS message 0120050409/0000362105/1999)
WHILE RECEXTNAM CS ','.
PERFORM INIT_REC TABLES RECEIVERS.
READ TABLE RECEIVERS INDEX 1.
RECEIVERS-RECEXTNAM = RECEXTNAM+0(SY-FDPOS).
ADD 1 TO SY-FDPOS.
SHIFT RECEXTNAM LEFT BY SY-FDPOS PLACES.
MODIFY RECEIVERS INDEX 1.
PERFORM SO_OBJECT_SEND_REC
TABLES TEXTTAB RECEIVERS
USING OHD.
ENDWHILE.
*- check last recipient in recipient list
IF RECEXTNAM <> SPACE.
PERFORM INIT_REC TABLES RECEIVERS.
READ TABLE RECEIVERS INDEX 1.
RECEIVERS-RECEXTNAM = RECEXTNAM.
MODIFY RECEIVERS INDEX 1.
PERFORM SO_OBJECT_SEND_REC
TABLES TEXTTAB RECEIVERS
USING OHD.
ENDIF.
ENDFUNCTION.
FORM SO_OBJECT_SEND_REC *
FORM SO_OBJECT_SEND_REC
TABLES OBJCONT STRUCTURE SOLI
RECEIVERS STRUCTURE SOOS1
USING OBJECT_HD STRUCTURE SOOD1.
DATA: OID LIKE SOODK,
TO_ALL LIKE SONV-FLAG,
OKEY LIKE SWOTOBJID-OBJKEY.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
EXTERN_ADDRESS = 'X'
OBJECT_HD_CHANGE = OBJECT_HD
OBJECT_TYPE = 'RAW'
OUTBOX_FLAG = 'X'
SENDER = SY-UNAME
IMPORTING
OBJECT_ID_NEW = OID
SENT_TO_ALL = TO_ALL
OFFICE_OBJECT_KEY = OKEY
TABLES
OBJCONT = OBJCONT
RECEIVERS = RECEIVERS
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC <> 0.
RAISE OTHERS.
ENDIF.
ENDFORM.
FORM INIT_REC *
FORM INIT_REC TABLES RECEIVERS STRUCTURE SOOS1.
CLEAR RECEIVERS.
REFRESH RECEIVERS.
MOVE SY-DATUM TO RECEIVERS-RCDAT .
MOVE SY-UZEIT TO RECEIVERS-RCTIM.
MOVE '1' TO RECEIVERS-SNDPRI.
MOVE 'X' TO RECEIVERS-SNDEX.
MOVE 'U-' TO RECEIVERS-RECNAM.
MOVE 'U' TO RECEIVERS-RECESC.
MOVE 'INT' TO RECEIVERS-SNDART.
MOVE '5' TO RECEIVERS-SORTCLASS.
APPEND RECEIVERS.
ENDFORM.
2. -
How to send e-mail with an attachment from remote database server.???
Hi All,
I have tried the simple mail sending and with the attachment using UTL_SMTP. But the problem is , it is sending the mail with attachment of the file name i give, it takes and creates that file and sends as attachment not from the actual file location. I am trying to attach the file which i stored in remote database server.
The following code I tried. But not worked for attachment
DECLARE
v_From VARCHAR2(80) := '[email protected]';
v_Recipient VARCHAR2(80) := '[email protected]';
v_Subject VARCHAR2(80) := 'test subject';
v_Mail_Host VARCHAR2(30) := 'pop3.somedomain.com';
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'MIME-Version: 1.0'|| crlf || -- Use MIME mail standard
'Content-Type: multipart/mixed;'|| crlf ||
' boundary="-----SECBOUND"'|| crlf ||
crlf ||
'-------SECBOUND'|| crlf ||
'Content-Type: text/html;'|| crlf ||
'Content-Transfer_Encoding: 7bit'|| crlf ||
crlf ||
'some message text'|| crlf || -- Message body
'more message text'|| crlf ||
crlf ||
'-------SECBOUND'|| crlf ||
'Content-Type: text/html;'|| crlf ||
' name="Fund Authorization report"'|| crlf ||
'Content-Transfer_Encoding: 8bit'|| crlf ||
'Content-Disposition: attachment;'|| crlf ||
' filename="/usr/tmp/Test.html"'|| crlf ||
crlf ||
'HTML Attachment'|| crlf || -- Content of attachment
crlf ||
'-------SECBOUND--' -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;How can I attach a file which is stored in database server and send it in a mail.
Please someone help me in this.
Thanks,
Alaka.Try this code
Regards Salim.
CREATE OR REPLACE TRIGGER EmailOnServerErr AFTER SERVERERROR ON DATABASE
DECLARE
mail_conn UTL_SMTP.connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
msg VARCHAR2(32760);
sid_name VARCHAR2(16);
bdump_dest VARCHAR2(128);
smtp_relay VARCHAR2(32) := 'MyMailRelay';
recipient_address VARCHAR2(64) := '[email protected]';
sender_address VARCHAR2(64) := '[email protected]';
mail_port NUMBER := 25;
log_file_handle UTL_FILE.FILE_TYPE;
log_file_dir VARCHAR2(256) := 'ERR_LOG_DIR';
log_file_name VARCHAR2(256) := 'OracleErrors.log';
maxlinesize NUMBER := 32767;
session_rec sys.v_$session%ROWTYPE;
audit_rec sys.dba_audit_trail%ROWTYPE;
auditing BOOLEAN;
LinesOfSQL BINARY_INTEGER;
offending_sql DBMS_STANDARD.ora_name_list_t;
CURSOR bdump_cur IS
SELECT TRIM(value)
FROM v$parameter
WHERE name = 'background_dump_dest'
CURSOR sid_cur IS
SELECT TRIM(instance_name)
FROM v$instance
CURSOR session_cur IS
SELECT s.*
FROM v$session s
WHERE s.sid = dbms_support.mysid
CURSOR audit_trail_cur(AUDSID IN NUMBER) IS
SELECT *
FROM dba_audit_trail
WHERE sessionid = AUDSID
BEGIN
IF (USER = 'SYSTEM' OR USER = 'SYS') THEN
-- Ignore this error
NULL;
ELSIF IS_SERVERERROR (1034) THEN
-- Ignore this error
NULL;
ELSE
-- get the sid
OPEN sid_cur;
FETCH sid_cur INTO sid_name;
CLOSE sid_cur;
-- get the location of the alert log
OPEN bdump_cur;
FETCH bdump_cur INTO bdump_dest;
CLOSE bdump_cur;
-- get the session information
OPEN session_cur;
FETCH session_cur INTO session_rec;
CLOSE session_cur;
-- get the audit_trail information if it exists
OPEN audit_trail_cur(session_rec.audsid);
FETCH audit_trail_cur INTO audit_rec;
auditing := audit_trail_cur%FOUND;
CLOSE audit_trail_cur;
IF session_rec.program = 'MyProgram.exe' THEN
NULL; -- ignore actions from MyProgram - that's where I do maintenance
ELSE
-- compose the message
msg := 'Subject: Oracle error '||' on '||sid_name||crlf;
msg := msg||'To: '||recipient_address||crlf;
msg := msg||'For more information see the alert log file located at:'||crlf;
msg := msg||bdump_dest||'/alert_'||sid_name||'.log'||crlf;
msg := msg||'or the error log file: $'||log_file_dir||'/'||log_file_name||crlf;
msg := msg||'Error Time='||TO_CHAR(SYSDATE,'DD-Mon-YYYY HH24:MI:SS')||crlf;
msg := msg||DBMS_UTILITY.FORMAT_CALL_STACK||crlf;
LinesOfSQL := sql_txt(offending_sql);
msg := msg||'Offending SQL is:'||crlf;
FOR loop_counter IN offending_sql.FIRST..offending_sql.LAST
LOOP
msg := msg||offending_sql(loop_counter);
END LOOP;
msg := msg||crlf||'----- PL/SQL Error Stack -----'||crlf;
msg := msg||DBMS_UTILITY.FORMAT_ERROR_STACK||crlf;
msg := msg||'V$SESSION.SADDR=' ||session_rec.saddr ||crlf;
msg := msg||'V$SESSION.SID=' ||session_rec.sid ||crlf;
msg := msg||'V$SESSION.SERIAL#=' ||session_rec.serial# ||crlf;
msg := msg||'V$SESSION.AUDSID=' ||session_rec.audsid ||crlf;
msg := msg||'V$SESSION.PADDR=' ||session_rec.paddr ||crlf;
msg := msg||'V$SESSION.USER#=' ||session_rec.user# ||crlf;
msg := msg||'V$SESSION.USERNAME='||session_rec.username||crlf;
msg := msg||'V$SESSION.COMMAND=' ||session_rec.command ||crlf;
msg := msg||'V$SESSION.OWNERID=' ||session_rec.ownerid ||crlf;
msg := msg||'V$SESSION.TADDR=' ||NVL(session_rec.taddr ,'Null')||crlf;
msg := msg||'V$SESSION.LOCKWAIT='||NVL(session_rec.lockwait,'Null')||crlf;
msg := msg||'V$SESSION.STATUS=' ||NVL(session_rec.status ,'Null')||crlf;
msg := msg||'V$SESSION.SERVER=' ||NVL(session_rec.server ,'Null')||crlf;
msg := msg||'V$SESSION.SCHEMA#=' ||session_rec.schema#||crlf;
msg := msg||'V$SESSION.SCHEMANAME=' ||NVL(session_rec.schemaname,'Null')||crlf;
msg := msg||'V$SESSION.OSUSER=' ||NVL(session_rec.osuser ,'Null')||crlf;
msg := msg||'V$SESSION.PROCESS=' ||NVL(session_rec.process ,'Null')||crlf;
msg := msg||'V$SESSION.MACHINE=' ||NVL(session_rec.machine ,'Null')||crlf;
msg := msg||'V$SESSION.TERMINAL=' ||NVL(session_rec.terminal ,'Null')||crlf;
msg := msg||'V$SESSION.PROGRAM=' ||NVL(session_rec.program ,'Null')||crlf;
msg := msg||'V$SESSION.TYPE=' ||NVL(session_rec.type ,'Null')||crlf;
msg := msg||'V$SESSION.SQL_ADDRESS=' ||session_rec.sql_address ||crlf;
msg := msg||'V$SESSION.SQL_HASH_VALUE=' ||NVL(TO_CHAR(session_rec.sql_hash_value) ,'Null')||crlf;
msg := msg||'V$SESSION.PREV_SQL_ADDR=' ||session_rec.prev_sql_addr||crlf;
msg := msg||'V$SESSION.PREV_HASH_VALUE='||NVL(TO_CHAR(session_rec.prev_hash_value),'Null')||crlf;
msg := msg||'V$SESSION.MODULE=' ||NVL(session_rec.module ,'Null')||crlf;
msg := msg||'V$SESSION.MODULE_HASH='||NVL(TO_CHAR(session_rec.module_hash),'Null')||crlf;
msg := msg||'V$SESSION.ACTION=' ||NVL(session_rec.action ,'Null')||crlf;
msg := msg||'V$SESSION.ACTION_HASH='||NVL(TO_CHAR(session_rec.action_hash),'Null')||crlf;
msg := msg||'V$SESSION.CLIENT_INFO='||NVL(session_rec.client_info ,'Null')||crlf;
msg := msg||'V$SESSION.FIXED_TABLE_SEQUENCE='||NVL(TO_CHAR(session_rec.fixed_table_sequence),'Null')||crlf;
msg := msg||'V$SESSION.ROW_WAIT_OBJ#=' ||NVL(TO_CHAR(session_rec.row_wait_obj#) ,'Null')||crlf;
msg := msg||'V$SESSION.ROW_WAIT_FILE#=' ||NVL(TO_CHAR(session_rec.row_wait_file#) ,'Null')||crlf;
msg := msg||'V$SESSION.ROW_WAIT_BLOCK#='||NVL(TO_CHAR(session_rec.row_wait_block#),'Null')||crlf;
msg := msg||'V$SESSION.ROW_WAIT_ROW#=' ||NVL(TO_CHAR(session_rec.row_wait_row#) ,'Null')||crlf;
msg := msg||'V$SESSION.LOGON_TIME=' ||NVL(TO_CHAR(session_rec.logon_time,'DD-Mon-YYYY HH24:MI:SS'),'Null')||crlf;
msg := msg||'V$SESSION.LAST_CALL_ET=' ||NVL(TO_CHAR(session_rec.last_call_et) ,'Null')||crlf;
msg := msg||'V$SESSION.PDML_ENABLED=' ||NVL(session_rec.pdml_enabled ,'Null')||crlf;
msg := msg||'V$SESSION.FAILOVER_TYPE=' ||NVL(session_rec.failover_type ,'Null')||crlf;
msg := msg||'V$SESSION.FAILOVER_METHOD='||NVL(session_rec.failover_method,'Null')||crlf;
msg := msg||'V$SESSION.FAILED_OVER=' ||NVL(session_rec.failed_over ,'Null')||crlf;
msg := msg||'V$SESSION.RESOURCE_CONSUMER_GROUP='||NVL(session_rec.resource_consumer_group,'Null')||crlf;
msg := msg||'V$SESSION.PDML_STATUS=' ||NVL(session_rec.pdml_status ,'Null')||crlf;
msg := msg||'V$SESSION.PDDL_STATUS=' ||NVL(session_rec.pddl_status ,'Null')||crlf;
msg := msg||'V$SESSION.PQ_STATUS=' ||NVL(session_rec.pq_status ,'Null')||crlf;
IF auditing THEN
msg := msg||'DBA_AUDIT_TRAIL.OS_USERNAME=' ||NVL(audit_rec.os_username,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.USERNAME=' ||NVL(audit_rec.username ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.USERHOST=' ||NVL(audit_rec.userhost ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.TERMINAL=' ||NVL(audit_rec.terminal ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.TIMESTAMP=' ||TO_CHAR(audit_rec.timestamp,'DD-Mon-YYYY HH24:MI:SS')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.OWNER=' ||NVL(audit_rec.owner ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.OBJ_NAME=' ||NVL(audit_rec.obj_name ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.ACTION=' ||audit_rec.action ||crlf;
msg := msg||'DBA_AUDIT_TRAIL.ACTION_NAME=' ||NVL(audit_rec.action_name ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.NEW_OWNER=' ||NVL(audit_rec.new_owner ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.NEW_NAME=' ||NVL(audit_rec.new_name ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.OBJ_PRIVILEGE='||NVL(audit_rec.obj_privilege ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.SYS_PRIVILEGE='||NVL(audit_rec.sys_privilege ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.ADMIN_OPTION=' ||NVL(audit_rec.admin_option ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.GRANTEE=' ||NVL(audit_rec.grantee ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.AUDIT_OPTION=' ||NVL(audit_rec.audit_option ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.SES_ACTIONS=' ||NVL(audit_rec.ses_actions ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_TIME=' ||NVL(TO_CHAR(audit_rec.logoff_time) ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LREAD=' ||NVL(TO_CHAR(audit_rec.logoff_lread) ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_PREAD=' ||NVL(TO_CHAR(audit_rec.logoff_pread) ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LWRITE='||NVL(TO_CHAR(audit_rec.logoff_lwrite),'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_DLOCK=' ||NVL(audit_rec.logoff_dlock ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.COMMENT_TEXT=' ||NVL(audit_rec.comment_text ,'Null')||crlf;
msg := msg||'DBA_AUDIT_TRAIL.SESSIONID=' ||audit_rec.sessionid ||crlf;
msg := msg||'DBA_AUDIT_TRAIL.ENTRYID=' ||audit_rec.entryid ||crlf;
msg := msg||'DBA_AUDIT_TRAIL.STATEMENTID=' ||audit_rec.statementid ||crlf;
msg := msg||'DBA_AUDIT_TRAIL.RETURNCODE=' ||audit_rec.returncode ||crlf;
msg := msg||'DBA_AUDIT_TRAIL.PRIV_USED=' ||NVL(audit_rec.priv_used,'Null')||crlf;
END IF;
msg := msg||'-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'||crlf||crlf;
-- write the message to the error log file
log_file_handle := UTL_FILE.FOPEN (log_file_dir, log_file_name, 'A',maxlinesize);
UTL_FILE.PUT_LINE(log_file_handle,msg);
UTL_FILE.FCLOSE(log_file_handle);
-- send the message by Email
mail_conn := UTL_SMTP.open_connection(smtp_relay, mail_port);
UTL_SMTP.HELO(mail_conn, smtp_relay);
UTL_SMTP.MAIL(mail_conn, sender_address);
UTL_SMTP.RCPT(mail_conn, recipient_address);
UTL_SMTP.DATA(mail_conn, msg);
UTL_SMTP.QUIT(mail_conn);
END IF; -- client_program = MyProgram.exe
END IF;
END;
/ -
How to send a mail in html format from a send mail workflow node ?
Dear all,
Do you know if it is possible to send an e-mail in HTML format (instead of RAW) from a "send mail" node in a workflow ? ... if "yes", please, let me know.
(I need to do that because I want to use the "href" tag to insert an hyperlink inside the e-mail)
- I haven't found any parameter to specify the format of the e-mail.
- Inside SCOT I tried to change the parameters for the SMTP node... without success.
- I don't want to use a task calling the FM SO_OBJECT_SEND.
NicolasHi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir -
How to send e-mail with attach file from a stated directory?
I can only put the file in the program's same directory for attachment, how to state the file path for the file attachment?
Hi..
The FileDataSource class has two contructors.
FileDataSource(java.io.File file)
Creates a FileDataSource from a File object.
FileDataSource(java.lang.String name)
Creates a FileDataSource from the specified path name.
Using either of them we can select the file in anypath of your system i.e. server.
If you need relative path then you have to use File object.
Cheers. -
How to process a Blanket Purchase order?
Hi,
Can you please let me know how to process a blanket purchase order received from a customer?
Can we create a sales order based on the customer's blanket purchase order?
Please help me out with this issue.
Sincerely,
PujaDear Puja,
You can create Sales Order ....with reference to Blanket / Frame Purchase Order. This Frame PO contains, Validity and Limit.
Based on this info, you can create Blanket Sales Order.
You can split the blanket sales orders relevant to the customer PO.
Regards - Muralidhara -
How to send SAP Mails to the Customer or vendor when Sales Order or Purchase order rises and How to Use the T-code : NACE by uisng that transaction code how send mails
Hi,
Go through this
In NACE t-code we have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
You should know the Output type for each document;
like
for sales order it is BAoo for Purchase order it is NEU for delivery it is LD00
for Invoice it is RD00.
and the application for each document:
for PO it is EF
for Sales doc's it is V1
delivery it is V2
billing Doc's it is V3.
Select the Application from NACE and click on output types.
select the right output type and click on the processing routines on the left hand side.
it displays the Medium(print,Fax,Mail, edi etc), Output type, Program and the Script form or Smart form.
Regards
Ravi -
In an extended classic scenario, how can we make few purchase orders to sta
Hi All,
In an extended classic scenario, how can we make few purchase orders to stay local (i.e. without copying it to the back end). The decision criteria to stay local is information other than product category, i.e. using pcard and the cart value.
Thanks
MuraliMurali,
As I said usually this integration is done using ALE - IDOCs. You can find the all the configuration do be done here.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
In this the filtering can be done at two levels.
1. Data Filtering
2. Segment Filtering
Data Filtering:
Data filtering can be done in dustribution model where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Look at BD64 where you can do the config for data filtering.
Regards,
Ravi
Note : Please mark the helpful answers -
How to send a mail in workflow keeping 1 receiver in CC and the other in TO
Hi,
Can anybody tell me how to send a mail in workflow keeping 1 receiver in CC and the other in TO.
I need to send a mail to an employee keeping his/her manager in CC through workflow.
Regards,
LavanyaHi Lavanya,
I dont think its possible using Send mail step type.
But it can be done by using the FM SO_NEW_DOCUMENT_SEND_API1. Just create a method and Call this FM accordingly.
Thanks,
Viji. -
How to send a mail in pdf format file in sbwp??
how to send a mail in pdf format file in sbwp?? and how to read the content of the mail?
Refer the following link for Sample Program:
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm -
How to send a mail by ckicking the button using java
hi,
how to send a mail by clicking the button (like payroll silp in that contain one button if we click that it autometically go through the mail as a attachment) pls frd to me my gmail is [email protected]Hi,
It seems we are doing the homework for you; to make you start with something; look at the sample code below and try to understand it first then put the right values
to send an email with an attachement.
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.util.Date;
import java.util.Properties;
import javax.activation.DataHandler;
import javax.activation.FileDataSource;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
import javax.swing.AbstractAction;
import javax.swing.Action;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JTextField;
public class Main {
* @param args
public static void main(String[] args) {
// Create the frame
String title = "Frame Title";
JFrame frame = new JFrame(title);
// Create a component to add to the frame
JComponent comp = new JTextField();
Action action = new AbstractAction("Button Label") {
// This method is called when the button is pressed
public void actionPerformed(ActionEvent evt) {
System.out.println("sending email with attachment");
sendEmail();
// Create the button
JButton button = new JButton(action);
// Add the component to the frame's content pane;
// by default, the content pane has a border layout
frame.getContentPane().add(comp, BorderLayout.SOUTH);
frame.getContentPane().add(button, BorderLayout.NORTH);
// Show the frame
int width = 300;
int height = 300;
frame.setSize(width, height);
frame.setVisible(true);
protected static void sendEmail() {
String from = "me@localhost";
String to = "me@localhost";
String subject = "Important Message";
String bodyText = "This is a important message with attachment";
String filename = "c:\\tmp\\message.pdf";
Properties properties = new Properties();
properties.put("mail.stmp.host", "localhost");
properties.put("mail.smtp.port", "25");
Session session = Session.getDefaultInstance(properties, null);
try {
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(
to));
message.setSubject(subject);
message.setSentDate(new Date());
// Set the email message text.
MimeBodyPart messagePart = new MimeBodyPart();
messagePart.setText(bodyText);
// Set the email attachment file
MimeBodyPart attachmentPart = new MimeBodyPart();
FileDataSource fileDataSource = new FileDataSource(filename) {
@Override
public String getContentType() {
return "application/octet-stream";
attachmentPart.setDataHandler(new DataHandler(fileDataSource));
attachmentPart.setFileName(filename);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messagePart);
multipart.addBodyPart(attachmentPart);
message.setContent(multipart);
Transport.send(message);
} catch (MessagingException e) {
e.printStackTrace();
}The sample above is not ideal so you need to go through it and start to ask me some questions if you have
Let me know if you miss something
Regards,
Alan Mehio
London,UK -
How to send HTML mail with images multipart/related message
Hi,
Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful.
ThanksHi,
Could any body tell me how to send HTML mail with
ith images in "multipart/related" message,if any body
can give the code ,it would be helpful.
ThanksHi!
Refer to
http://developer.java.sun.com/developer/onlineTraining/JavaMail/index.html
I've found it very helpful.
Look at the last part for a code showing how to send HTML mail!
Regards -
To SET -UP message type 5 External Send to the purchase order approver
Hi All
Please help me to To SET -UP message type 5 External Send to the purchase order approver
SusanSusan,
This to me sounds like a release strategy setup using workflow. Could you please set up Release strategies initially and and then the workflow part couldd be handled by a workflow personnel.
Else, Setup teh message type with medium 7, and partner function MP, put the user name in the partner field. Go to communication method, choose the recipient type and fiull other required parameters and you should be set.
Edited by: Pavan Kumar on Apr 6, 2010 12:27 PM -
How to link asset with purchase order and PO Item.
Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM
Maybe you are looking for
-
How to retreive and display return value from BAPI
Hello, I am using SUP to create a sales order application. In my MBO I have a create operation which calls a BAPI to create a sales order. How can I retrieve the return value (saled doc number) and display it on a screen and display it as an Alert of
-
I have tried all morning to get my picture files to move into iPhotos. I want to push them using photo stream to my Apple TV. My picture files were originally from a Windows programme, I have too many photos to loose or just lay unviewed on my Mac!
-
How to use digital av adapter with iphone4
How to use digital av adapter with iphone4
-
hi sap i have an internal table with rprctr like glpca-rprctr, cost l ike glpca-tsl, " amount income like glpca-tsl, " amount when i give ranges to the RPRCTR (PROFIT CENTER) i should get values to that perticular PROFIT CENTER, now in my prog it is
-
Why use Transparent gateway in stead of heterogenous Connectivity
I am looking for a solution to update data in a AS400 environment through a oracle DB. I found information to do this. I can use transparent gateways or Generic Connectivity. Generic connectivity is free and for transparent gateways I have to pay. Bu